How to Enable H.264 + Fucntion for the System? Here are the steps for you: Open the DVR’s or the NVR’s Menu click “Record” and select “Parameters“ Click and enable “H264+“, click “yes” to reboot the device, and select “apply” to save …
How to Reset the Camera to Factory Default on DVR? Purpose: For some newly released analog cameras, they have their own OSD menu. In this menu, the users could change the working mode, adjust the image parameters, and reset the camera, …
How to Connect the Small Base Station Software on Computer? Purpose: This instruction is to help you add a small base to Annke Sight software on the computer. Steps: 1. Connect the base station to the Internet. Make sure the base station …
IP camera connect with Tinycam Pro For the Tinycam can only working with IP cameras, It can not connect with NVR. So if you have already had a POE system( NVR+ IP camera), It can not directly get the steam …
How to Reset Password by Serial Number on the Monitor? If the system password has been forgotten, please send the following information to support@xvraid.com by email or submit a request on the help center with the required information. Then we will send you the …
LongPlus IP Camera User Guide Set up the camera Click the “Add device” in the APP or click on the + sign in the upper right corner, and select add new camera. *Long press the power button for more than …
Aliluya App About This Manual This Note is universal version for Aliluya App. The functions supported differentiate to different version, please subject to the version you download. This Note is intended to be your reference tool when operating. Please fully understand …
What to Do If The NVR Offline? Introduction: To remotely access the NVR system on the phone APP or computer software, the cloud network status of the NVR system must be ‘Online’. For the new version, right-click the mouse on …
What to Do If The Cloud P2P of The DVR/NVR System is Offline? Purpose: To remotely access the DVR/NVR system on the phone APP or computer software, the cloud network status of the DVR/NVR system must be ‘Online’. If the …
What to Do If P2P Status Shows Offline? Purpose: If you want to remotely access the Annke system via phone app or computer software, the system’s network status must be Online. Below is the method to make the Annke New Series …
What to Do if DVR or NVR can’t Connect to Internet Successfully? Please plug DVR or NVR into the router with network cable if you wanna use a computer or phone to connect the recorder locally or remotely. You can …