hybrid – XVRAID XVR-DVR-NVR CCTV DESK https://www.xvraid.com security and surveillance blog Thu, 04 Jul 2024 20:29:20 +0000 en-US hourly 1 https://wordpress.org/?v=7.1 https://www.xvraid.com/wp-content/uploads/2022/02/ipcam.png hybrid – XVRAID XVR-DVR-NVR CCTV DESK https://www.xvraid.com 32 32 Smart Motion Detection Cameras 2024 https://www.xvraid.com/guide/smart-motion-detection-cameras-2024.html https://www.xvraid.com/guide/smart-motion-detection-cameras-2024.html#respond Thu, 04 Jul 2024 20:29:20 +0000 https://www.xvraid.com/?p=5892 Smart Motion Detection Cameras 2024, Surveillance systems that send false motion activated alarms triggered by extreme weather conditions, leaves rustling in the wind and animals moving throughout the scene are not only annoying, but are also counterproductive when running a business. Dahua’s Smart Motion Detection (SMD) is an ideal solution for low populated areas where you want an alert for people or vehicles anywhere in the scene without having to set rules and draw lines.

image1

Smart Motion Detection Cameras
Security Camera  carries cameras with incredible features for security, such as Smart Motion Detection Cameras also known as SMD+!

Motion Detection is a technology that has been utilized for years to detect changes in image quality on DVRs and COAX cameras. With the addition of AI, it has now become even more powerful! Before we go into why SMD is so great, let’s examine what motion detection is and what it does!

General Motion Detection and its function is to detect (see) movement (signature) via pixel changes in the image. What it means is that if an object moves within the camera’s field of view, the camera’s motion detection function will be able to see it by knowing that the pixels in one frame are significantly different than thus of the previous frame. There are a variety of possible outcomes from this, including recording, alerting through the app, and even triggering an alarm out. You can describe it as simple as that! How does it work, you ask?

image2 718w210h

First knowing what pixels are helps understand this process. The pixels that make up an image or screen are what makes up the picture. When a motion detection sensor compares two images, it is looking for how the pixels appear in one moment and how they appear in the a following frame, or still image.

In general, cameras take in a fixed view from any given place and process the pixels in the image as they might remain the same. In this example, the floor and walls, street signs, and other static objects aren’t likely to suddenly shift. These static elements make up the pixels in the image, and motion detection can identify when they change. Though subtle changes such as shadows might occur, MD is unable to detect them due to their gradual nature. A car or a person crossing the scene, on the other hand, may result in a sudden and chaotic change in pixels. MD might consider a motion event as a consequence of a sudden change in pixels.

When it comes to motion detection, there are three critical aspects that determine whether or not a change in pixels is considered a motion event. These settings are adjustable from most IP cameras, and they are referred to as sensitivity, threshold, and anti-dither. You can fine-tune your Motion detection to ensure that objects are of similar size or movement, moving more or less, and for a longer or shorter period of time.

Motion detection is an essential aspect of recording motion pictures. It’s crucial to identify suspicious activity in the moment in order to obtain a notification on your cell phone or through email if an unexpected event occurs. After all, motion footage is recorded when a recorder captures motion footage. The yellow tinge on the video frame that identifies it as motion-tagged footage is usually used in addition to the standard green tinge when a non-motion-tagged recording. By saving recording space, you can find footage that might have an event in it faster. Additionally, you can limit the size of the data file by setting your cameras to record only when motion is detected.

Motion Detection is helpful, but from, time to time it can produce errors or false alerts like any security technology. That’s why we have introduce Smart Motion Detection Cameras to help aid with motion detection even further.

Smart Motion Detection Cameras 2024

With Smart motion detection, SMD DVRs can process advanced video data calculations on the fly, eliminating human or vehicle objects from the picture. That’s what AI-powered SMD DVRs do! With SMD, this AI function can use its processing power to eliminate objects from the picture entirely.

You now have the ability to monitor a scene for motion, but limit that monitoring to only for the specific things you want it to look at! Imagine a busy parking lot full of cars that is normally off-limits to pedestrian traffic outside of employee activity. No longer will your SMD-powered DVR remove all vehicle targets when it applies to only moving where they shouldn’t! In the same token, you can focus your SMD system exclusively on people targets, eliminating anything it deems nonhuman from the events list. No more cats, raccoons, leaves, or squirrels activating your motion alerts at night!

Hybrid DVR systems are currently the only AI-based alert tracking systems that can really take alert tracking to the next level using SMD and SMD+. COAX-based systems are now even more viable than ever before, thanks to SMD and SMD+. We now carry COAX and IP cameras as well, which makes adding an IP camera to a Hybird DVR system feasible!

SMD is also available on our IP camera systems natively, which means no matter what type of system you have and are upgrading, or if your purchasing something new, you can rest assured we can help you get the power of SMD  and Smart Motion Detection Cameras working for your location today!

.

]]> https://www.xvraid.com/guide/smart-motion-detection-cameras-2024.html/feed 0 Blue Line IP Camera Troubleshooting v2 https://www.xvraid.com/guide/blue-line-ip-camera-troubleshooting-v2.html https://www.xvraid.com/guide/blue-line-ip-camera-troubleshooting-v2.html#respond Tue, 14 May 2024 16:15:27 +0000 https://www.xvraid.com/?p=5816 Blue Line IP Camera Troubleshooting v2, Experience the latest in IP security camera technology with our “Blue Line” Pro Series. Our cutting-edge IP cameras offer video resolution ranging from 1080p to 4K, ensuring that every detail is captured with exceptional clarity. Whether monitoring your home, business, or any other property, our “Blue Line” IP cameras provide the highest level of video quality available on the market.  We offer a wide variety of IP cameras including bullet, domes, PTZ cameras, and more.  All of our commercial-grade security cameras can be used both indoor and outdoors.

• Crystal clear digital video quality with high definition up to 4K
• View footage with exceptional clarity and sharpness
• Motion notifications and easy video management
• Variety of viewing angles and styles

Unlimited Access Anywhere, Anytime

When you combine our “Blue Line” IP Cameras with one of our compatible IP camera network video recorders you can keep an eye on your assets no matter where you are. Take advantage of the free remote viewing app to view on your cell. Use the free software to view and control you cameras on your tablet, or computer. Stay connected and have peace of mind knowing you can monitor your cameras remotely, without any additional monthly fees.

LATEST FIRMWARE UPDATES FOR YOUR DEVICE

UPDATING YOUR SECURITY CAMERA FIRMWARE

Firmware Updates

In order to do a firmware update you must first identify the EXACT model number of your DVR or NVR unit. The model number can be found on the sticker located on the bottom or side of the unit. All CCTV Security Pros model numbers begin with the prefix “CSP” (Example, CSP-XXXX). Please match your model number to the list provided below. You will also need to locate your order confirmation email to determine when the unit was purchased. Once you have identified the correct model number and firmware please continue by following the instructions below.

Blue Line IP Camera Troubleshooting v2

Upgrading Your Firmware

Please identify the correct model from the list of firmware provided below.

Please select the appropriate link and download the .bin file. Once the download is completed copy the .bin file to a USB Flash/Thumb Drive. We suggest formatting your USB drive to FAT32 before attempting the update.

**Note : Units with Build Dates of 2013 or earlier may require you to rename the file to “update.bin” before launching the upgrade.

Once the .bin file has been transferred onto your drive you can insert the USB Drive into either of the two USB ports found on your unit. One can be found on the front panel and one can be found on the rear of the unit.

Once the drive is inserted into the unit go to the following menu:

Main Menu –> Setting –> System –> Upgrade. Click Start. Find and select the .bin file you transferred to the USB Drive and Click Start.

*NOTE – On select models you will need to go to:

Main Menu–> Info –> Version –> Upgrade

The unit will now begin upgrading to the latest Firmware Revision that is available for your device. Once completed the system will reboot. After the reboot we recommend doing the following:

1) Remove the USB Drive from your system.

2) Change your passwords on your “admin” account. For assistance in altering your password please follow this link: https://www.cctvsecuritypros.com/content/pdfs/password-account-settings.pdf

2014 PURCHASE DATE
DVR
CSP-LITE4 https://drive.google.com/file/d/0BxHOdABdpZ11c2tWVlNJdl9kMWM/view?usp=sharing
CSP-LITE4 (alternative) https://drive.google.com/file/d/0BxHOdABdpZ11M05Fd1dpUTRWLTg/view?usp=sharing
CSP-LITE8 https://drive.google.com/file/d/0BxHOdABdpZ11c2tWVlNJdl9kMWM/view?usp=sharing
CSP-LITE8 (alternative) https://drive.google.com/file/d/0BxHOdABdpZ11M05Fd1dpUTRWLTg/view?usp=sharing
CSP-LITE16 https://drive.google.com/file/d/0BxHOdABdpZ11RmkzVUg0Q051MEU/view?usp=sharing
CSP-LITE16 (alternative) https://drive.google.com/file/d/0BxHOdABdpZ11X2J3WGhmcHdhRHM/view?usp=sharing
CSP-4PRO960H https://drive.google.com/open?id=0BxHOdABdpZ11bGgtMk1Lc0NHYTg
CSP-4PRO960H (alternative) https://drive.google.com/open?id=0BxHOdABdpZ11S1EzQmIyMTUwOVE
CSP-8PRO960H https://drive.google.com/open?id=0BxHOdABdpZ11bGgtMk1Lc0NHYTg
CSP-8PRO960H (alternative) https://drive.google.com/open?id=0BxHOdABdpZ11RzdFUlRQRksxWEE
CSP-16PRO960H https://drive.google.com/open?id=0BxHOdABdpZ11bU8wNTNNN2JZMlE
CSP-16PRO960H (alternative) https://drive.google.com/open?id=0BxHOdABdpZ11VndLSERKaTl5ZGc
CSP-4XTR960H https://drive.google.com/open?id=0BxHOdABdpZ11bGgtMk1Lc0NHYTg
CSP-8XTR960H https://drive.google.com/open?id=0BxHOdABdpZ11bGgtMk1Lc0NHYTg
CSP-16XTR960H https://drive.google.com/open?id=0BxHOdABdpZ11bGgtMk1Lc0NHYTg
CSP-EXTREME32HD https://drive.google.com/open?id=0BxHOdABdpZ11c1oyWDZfN1NVMzQ
CSP-CVIMINI4 https://drive.google.com/open?id=0BxHOdABdpZ11b0FSSW5PSFVvVGc
CSP-CVIMINI https://drive.google.com/open?id=0BxHOdABdpZ11NFdfd3BxQXN4bVU
CSP-4PROCVI https://drive.google.com/open?id=0BxHOdABdpZ11akZvT2M3WnM0Zk0
CSP-8PROCVI https://drive.google.com/open?id=0BxHOdABdpZ11b20ydmtjako3RzA
CSP-16PROCVI https://drive.google.com/open?id=0BxHOdABdpZ11b20ydmtjako3RzA
NVR
CSP-4PROPOE https://drive.google.com/open?id=0BxHOdABdpZ11Ym1kVnZhVkNxaXc
CSP-8PROPOE https://drive.google.com/open?id=0BxHOdABdpZ11THZHUS1DMzdqZkE
CSP-EXTREME16NVR https://drive.google.com/open?id=0BxHOdABdpZ11THZHUS1DMzdqZkE
CSP-EXTREME32NVR https://drive.google.com/open?id=0BxHOdABdpZ11THZHUS1DMzdqZkE
CSP-XTRPOE16 https://drive.google.com/open?id=0BxHOdABdpZ11UVhxeXJ6OVJjUzA
HYBRID
CSP-EXTREME16HBR https://drive.google.com/open?id=0BxHOdABdpZ11Mm5tTm4zanJnVGc
CSP-4HBR960H https://drive.google.com/open?id=0BxHOdABdpZ11VFBpNXNmYTFjU2M
CSP-8HBR960H https://drive.google.com/open?id=0BxHOdABdpZ11VFBpNXNmYTFjU2M
CSP-16HBR960H https://drive.google.com/open?id=0BxHOdABdpZ11VFBpNXNmYTFjU2M
 2015 PURCHASE DATE
DVR
CSP-LITE4 https://drive.google.com/file/d/0BxHOdABdpZ11c2tWVlNJdl9kMWM/view?usp=sharing
CSP-LITE4 (alternative) https://drive.google.com/file/d/0BxHOdABdpZ11M05Fd1dpUTRWLTg/view?usp=sharing
CSP-LITE8 https://drive.google.com/file/d/0BxHOdABdpZ11c2tWVlNJdl9kMWM/view?usp=sharing
CSP-LITE8 (alternative) https://drive.google.com/file/d/0BxHOdABdpZ11M05Fd1dpUTRWLTg/view?usp=sharing
CSP-LITE16 https://drive.google.com/file/d/0BxHOdABdpZ11RmkzVUg0Q051MEU/view?usp=sharing
CSP-LITE16 (alternative) https://drive.google.com/file/d/0BxHOdABdpZ11X2J3WGhmcHdhRHM/view?usp=sharing
CSP-4PRO960H https://drive.google.com/open?id=0BxHOdABdpZ11S1EzQmIyMTUwOVE
CSP-8PRO960H https://drive.google.com/open?id=0BxHOdABdpZ11RzdFUlRQRksxWEE
CSP-16PRO960H https://drive.google.com/open?id=0BxHOdABdpZ11bU8wNTNNN2JZMlE
CSP-16PRO960H (alternative) https://drive.google.com/open?id=0BxHOdABdpZ11cHg2S1pPUXM2cm8
CSP-4XTR960H https://drive.google.com/open?id=0BxHOdABdpZ11QXY5R1N5SWc3Z0U
CSP-8XTR960H https://drive.google.com/open?id=0BxHOdABdpZ11WkhZeHBEbUx6ZUE
CSP-16XTR960H https://drive.google.com/open?id=0BxHOdABdpZ11UTlVOV9CUDdvX0k
CSP-CVIMINI4 https://drive.google.com/open?id=0BxHOdABdpZ11b0FSSW5PSFVvVGc
CSP-CVIMINI8 https://drive.google.com/open?id=0BxHOdABdpZ11NFdfd3BxQXN4bVU
CSP-4PROCVI https://drive.google.com/open?id=0BxHOdABdpZ11akZvT2M3WnM0Zk0
CSP-8PROCVI https://drive.google.com/open?id=0BxHOdABdpZ11b20ydmtjako3RzA
CSP-16PROCVI https://drive.google.com/open?id=0BxHOdABdpZ11b20ydmtjako3RzA
CSP-16PROCVI (alternative) https://drive.google.com/open?id=0BxHOdABdpZ11cHg2S1pPUXM2cm8
CSP-EXTREME32HD https://drive.google.com/open?id=0BxHOdABdpZ11U2ZnbUR4OEl0a28
CSP-CVIMINI4 https://drive.google.com/open?id=0BxHOdABdpZ11cDVTMExBbm1YLXc
CSP-CVIMINI8 https://drive.google.com/open?id=0BxHOdABdpZ11akZvT2M3WnM0Zk0
CSP-32XTRCVI https://drive.google.com/file/d/0BxHOdABdpZ11N1AwdWdUUkJHMTg/view?usp=sharing
CSP-4PRO https://drive.google.com/open?id=0BxHOdABdpZ11akZvT2M3WnM0Zk0
CSP-8PRO https://drive.google.com/open?id=0BxHOdABdpZ11akZvT2M3WnM0Zk0
CSP-16PRO https://drive.google.com/open?id=0BxHOdABdpZ11cHg2S1pPUXM2cm8
CSP-4XTR https://drive.google.com/open?id=0BxHOdABdpZ11akZvT2M3WnM0Zk0
CSP-8XTR https://drive.google.com/open?id=0BxHOdABdpZ11akZvT2M3WnM0Zk0
CSP-16XTR https://drive.google.com/open?id=0BxHOdABdpZ11cHg2S1pPUXM2cm8
CSP-32XTR https://drive.google.com/file/d/0BxHOdABdpZ11N1AwdWdUUkJHMTg/view?usp=sharing
 
HYBRIDS
CSP-4HBR960H https://drive.google.com/open?id=0BxHOdABdpZ11bGgtMk1Lc0NHYTg
CSP-8HBR960H https://drive.google.com/open?id=0BxHOdABdpZ11bGgtMk1Lc0NHYTg
CSP-16HBR960H https://drive.google.com/open?id=0BxHOdABdpZ11bGgtMk1Lc0NHYTg
CSP-4TRIBRID https://drive.google.com/file/d/0BxHOdABdpZ11N1AwdWdUUkJHMTg/view?usp=sharing
CSP-8TRIBRID  https://drive.google.com/file/d/0BxHOdABdpZ11N1AwdWdUUkJHMTg/view?usp=sharing
CSP-16TRIBRID https://drive.google.com/file/d/0BxHOdABdpZ11N1AwdWdUUkJHMTg/view?usp=sharing
 
NVR
CSP-NVRCUBE https://drive.google.com/open?id=0BxHOdABdpZ11ZzNKdlRmTEttSTQ
CSP-4PROPOE https://drive.google.com/open?id=0BxHOdABdpZ11UVhxeXJ6OVJjUzA
CSP-8PROPOE https://drive.google.com/open?id=0BxHOdABdpZ11UVhxeXJ6OVJjUzA
CSP-XTRPOE16 https://drive.google.com/open?id=0BxHOdABdpZ11UVhxeXJ6OVJjUzA
CSP-EXTREME16NVR https://drive.google.com/open?id=0BxHOdABdpZ11UVhxeXJ6OVJjUzA
CSP-EXTREME32NVR https://drive.google.com/open?id=0BxHOdABdpZ11UVhxeXJ6OVJjUzA
CSP-XTRPOE16 https://drive.google.com/open?id=0BxHOdABdpZ11UVhxeXJ6OVJjUzA
CSP-XTRNVR16 https://drive.google.com/open?id=0BxHOdABdpZ11UVhxeXJ6OVJjUzA
CSP-XTRNVR32 https://drive.google.com/open?id=0BxHOdABdpZ11U3VsTVdSd25zeWc
2016 – 2019 PURCHASE DATES
DVR
CSP-4LITE https://drive.google.com/open?id=0BxHOdABdpZ11cDVTMExBbm1YLXc
CSP-8LITE https://drive.google.com/open?id=0BxHOdABdpZ11cDVTMExBbm1YLXc
CSP-16LITE https://drive.google.com/open?id=0BxHOdABdpZ11akZvT2M3WnM0Zk0
CSP-4LITE.5 https://drive.google.com/open?id=0BxHOdABdpZ11aEVXeURTd3lpZXM
CSP-8LITE.5 https://drive.google.com/open?id=0BxHOdABdpZ11UXdFakdicVR1S2s
CSP-16LITE.5 https://drive.google.com/open?id=0BxHOdABdpZ11RXdfZkM0aHNqZzA
CSP-4LITE.X5 https://drive.google.com/open?id=0BxHOdABdpZ11Z0ItM0V5ZHhMaDA
CSP-8LITE.X5 https://drive.google.com/open?id=0BxHOdABdpZ11UEw2TkEzeWVRdFU
CSP-16LITE.X5 https://drive.google.com/open?id=0BxHOdABdpZ11eDZxUWU3cmtRcWs
CSP-4PRO https://drive.google.com/open?id=0BxHOdABdpZ11akZvT2M3WnM0Zk0
CSP-8PRO https://drive.google.com/open?id=0BxHOdABdpZ11cHg2S1pPUXM2cm8
CSP-16PRO https://drive.google.com/open?id=0BxHOdABdpZ11cHg2S1pPUXM2cm8
CSP-4PRO.7 https://drive.google.com/open?id=0BxHOdABdpZ11VjYwaDBrZHNLSnM
CSP-8PRO.7 https://drive.google.com/open?id=0BxHOdABdpZ11RXdfZkM0aHNqZzA
CSP-16PRO.7 https://drive.google.com/open?id=0BxHOdABdpZ11b1JaVTRtQWExQ2s
CSP-4PRO.X7 https://drive.google.com/open?id=0BxHOdABdpZ11UEw2TkEzeWVRdFU
CSP-8PRO.X7 https://drive.google.com/open?id=0BxHOdABdpZ11OExRUUNIVkJsWWc
CSP-16PRO.X7 https://drive.google.com/open?id=0BxHOdABdpZ11c2s1MnNoMlp2QTA
CSP-16TRIBRID https://drive.google.com/file/d/0BxHOdABdpZ11N1AwdWdUUkJHMTg/view?usp=sharing
CSP-16XTR https://drive.google.com/open?id=0BxHOdABdpZ11cHg2S1pPUXM2cm8
CSP-32XTR https://drive.google.com/file/d/0BxHOdABdpZ11N1AwdWdUUkJHMTg/view?usp=sharing
CSP-32XTR.X5 https://drive.google.com/open?id=18BBt7UqFBhbW8xqQKOGeu76JPMrUelFC
NVR
CSP-NVRWIFI https://drive.google.com/open?id=0BxHOdABdpZ11MUdkVVBLbENDR0E
CSP-NVRCUBE https://drive.google.com/open?id=0BxHOdABdpZ11UVhxeXJ6OVJjUzA
CSP-NVRPOE4 https://drive.google.com/open?id=0BxHOdABdpZ11UVhxeXJ6OVJjUzA
CSP-NVRPOE4-4KS https://drive.google.com/open?id=1CgTtWiWeFrURT_Bs35aNWgO4MrCQPliN
CSP-PROPOE8 https://drive.google.com/open?id=0BxHOdABdpZ11UVhxeXJ6OVJjUzA
CSP-XTRPOE16 https://drive.google.com/open?id=0BxHOdABdpZ11UVhxeXJ6OVJjUzA
CSP-XTRNVR16 https://drive.google.com/open?id=0BxHOdABdpZ11UVhxeXJ6OVJjUzA
CSP-XTRNVR32 https://drive.google.com/open?id=0BxHOdABdpZ11UVhxeXJ6OVJjUzA
CSP-PROPOE8-4K https://drive.google.com/open?id=1lLLuP3qUgee4rCiUZu7GEMUAteXWqmaI
CSP-XTRPOE16-4K https://drive.google.com/open?id=1lLLuP3qUgee4rCiUZu7GEMUAteXWqmaI
CSP-XTRNVR16-4K https://drive.google.com/open?id=1lLLuP3qUgee4rCiUZu7GEMUAteXWqmaI
CSP-PROPOE8-4KS https://drive.google.com/open?id=1CgTtWiWeFrURT_Bs35aNWgO4MrCQPliN
CSP-XTRPOE16-4KS https://drive.google.com/open?id=1CgTtWiWeFrURT_Bs35aNWgO4MrCQPliN
CSP-XTRNVR16-4KS https://drive.google.com/open?id=1CgTtWiWeFrURT_Bs35aNWgO4MrCQPliN
CSP-XTRNVR32-4KS https://drive.google.com/open?id=1CgTtWiWeFrURT_Bs35aNWgO4MrCQPliN
CSP-XTRNVR64-4KS2 https://drive.google.com/open?id=1-A_vk9q5x9PJwMK7Cv6XdG6xvJB1zEZ3

.

SureVision 2019 + Purchase Dates
NVR
SV-NVR2P8 https://drive.google.com/open?id=1IXTMXDH6Ts25SmYsCsJ5oRTH8fn5_4ka
SV-NVR4P16 https://drive.google.com/open?id=1c_y7YGxE_DY2kq8GEdkaoFE4kR-jwOfR
SV-NVR832 https://drive.google.com/open?id=1c_y7YGxE_DY2kq8GEdkaoFE4kR-jwOfR
SV-NVR864 https://drive.google.com/file/d/1t-OALXUz5uMujSi9iNUiWPDNBF__eXgF/view?usp=sharing

IMPORTANT: If you are having difficulty identifying the correct firmware please email us at support@cctvsecuritypros.com with your order number and unit model number.

User Account Locked

Your system will lock itself out when you or someone else has attempted to log into your DVR

with an incorrect user/password combination more than three times within 30 minutes

When this happens you have two options.

1. Wait 30 minutes after the last failed login attempt and try again.

2. Reboot the DVR by using the rear toggle switch or by unplugging.

When the unit powers back on try and login with the default username and passwords.

Username: admin

Password: admin

or

Username: 888888

Password: 888888

If neither of these passwords get you into your system you will need to email us at

Support@CCTVSecurityPros.com

and request a Master Password. Once we can confirm your

account we will happily be able to provide you with the correct login credentials.

Please have your Order Number or DVR/NVR Model Number when requesting a Master

Password.

*Note: The DVR/NVR Model Number can be found on the Bottom or Side of your system.

.

IP Camera Harness Repair

If your connector looks like the ones below, moisture has gotten into your RJ45 connector. The number one cause of premature IP camera failure has to do with improper weatherproofing techniques. If caught early enough a simple cotton swab and rubbing alcohol will clean that connector right up! You may need to resort to some heavier duty electrical contact cleaner if the cotton swab method does not work.

image1 209w246himage2 320w224h

If all else fails and the connector is too far gone and cleaning it will not work, you will need to perform a harness repair.

.

In order to perform the repair you will need:

.

.

image3 52w128h1 x RJ45 Crimp Tool1 x Male RJ45  1 x Female to Female RJ45

image4 77w68hConnector

image5 82w77h

.

1 x Your choice of weatherproofing ( Weatherproof junction box or weatherproof Female to Female connection)

.

.

image6 133w118himage7 133w82himage8 143w110h

Start by removing the RJ45 end off of your IP cameras harness. Be sure

.

Strip back the outside insulation to expose the internal cables.

.

image9 250w300h

Organize the cables to match the pinout of the IP camera. Slide the organized cables into the connector and crimp. All CCTV Security Pros IP cameras will use this pinout.

image10 333w282himage11 291w387h

Connect your Female to Female RJ45 connector to check your work, you should have a functioning IP camera now that its void of all corrision.

image12 314w419h

Now that the IP camera has been repaired we still need to weatherproof this connection. It is now more vulnerable than ever!

Consider using a weatherproof junction box to make your connections in, or perhaps a weatherproof Female to Female connector.

Remember that different coupling styles exist so make sure that you are informed about how to use the coupler before you start crimping wires.

Troubleshooting Steps 4/8/16 Channel

(Cannot Find the Network Host)

To solve the error, please verify that the camera is properly plugged into the back of the system. If you unplug and re-plug it back in this should verify it is connected physically.

If the issue continues go to Main Menu > Camera > Camera List and delete the camera with the red status from the bottom list and do a Device Search to verify the camera is showing up on the top list.

If the camera does not show up this means the cable is not connecting properly, which could either mean the camera is not getting power or isn’t transmitting data. The best way to determine whether it is an issue with the Camera or Cable is to bench test the camera on a known working cable.

If it does show up but it has a different IP Address, please confirm the IP Address is in the 10.1.1.1-255 range (This is the default range of the internal Switch).

If the camera is not within the correct IP range, then the camera could need to be modified on the top list to properly connect in which you would select the camera, hit modify, type in the camera’s username and password and set the IP address to DHCP to automatically obtain an IP or statically assign the camera an IP address to match your switch range and gateway.

If the camera is on the correct range, you should be able to add it to the bottom list and it will come up with Green or Red, If Red double check the error message on the live view on the system.

If the Error says Invalid Username or Password, go back to Settings > Camera > Camera List and modify the camera at the bottom of the list and type in the correct login information.

If the error says Cannot Find the Network Host, check the IP Address is in the correct range, if it is you need to verify your cable is good by testing the camera with another known good cable or testing on a short patch cable as the cable could be experiencing packet loss.

Make sure the cable is T568B Standard and is within 100 meters (328 feet.)

Night Vision Issues

When a camera goes into night vision mode, the infrared LEDs around the lens turn on. If the video signal at nighttime or in dark locations is washed out, foggy or you see “halos” on the screen it is because the infrared LEDs are reflecting back into the camera lens.

1.With Dome Cameras, the gasket that separates the lens from the infrared LEDs needs to be firmly pressed up against the inside of the Dome cover.
2.With Bullet cameras the sun hood on the top may be extended too far out, allowing

the LEDs to reflect off of it at night.

3.If you camera is mounted vertically on a surface such as siding, brick, drywall, etc be sure that the camera isnt pointing too close to the mounting surface. This will cause the

cameras LEDs to focalize on the mounting surface and greatly reduce the Infrared distance.

4.This can also happen on horizontal mounting surfaces such as eves and soffits. You may need to make small adjustments to the camera in order to clear up the picture and

get the most infrared range and clarity.

Adding 3rd Party Cameras to Blue Line NVR

We always recommend using Blue Line IP cameras with our Blue Line NVRs for the easiest and most complete experience possible. However, we understand that using 3rd Party Cameras can be beneficial in some applications. This guide will explain the basics of adding a 3rd Party IP camera into your Blue Line NVR.

Information you will need to add 3rd Party Cameras.

•Be sure your camera is ONVIF compliant.
•The Username and Password for the IP camera.
•The IP address of camera (may require software downloads from manufacturer)

With your camera attached to one of the PoE ports on your NVR, you’ll navigate to the camera settings from the main menu.

image13 431w255h

image14 303w398h

A 3rd Party Camera normally will not add itself, so you will need to go into the Camera List and click on Search Device. If the camera is detected, you will be able to select it and click on the Modify IP button toward the middle of the screen.

When modifying the IP address of the camera the default IP range for the PoE ports on the NVR is

10.1.1.xxx so you’ll want to make sure the camera is on the same range.

You will need to know the camera’s password to change the IP Address. Once the IP is successfully changed it should update after clicking Search Device again

image15 313w290h

Check the box to the left of the camera and click Add. Most cameras will show up with the Manufacturer as ONVIF. If they do not and show up as red, you will need to click on the edit button on the camera and change the Manufacturer to match the camera’s manufacturer, or to ONVIF if the manufacturer of the camera is not listed.

While in the modify window you can also enter the password for the camera in the password field. Once that is completed you can click OK. After a few seconds the status should change to a green icon and then you should be able to see the camera’s live view. Please keep in mind that if the Error Message says Invalid Username or Password you may need to login to the camera from the Web and setup an Onvif User for the system to login with.

If the camera is still showing offline, setting the manufacturer to PELCO can sometimes resolve the issue.

Additional 3rd Party Camera Information

•Cameras MUST be Onvif compliant!
•When searching for your camera you may see an error that reads “Operation Failed.” This message is normal when attempting to add 3rd party cameras. This is because the system is still currently logging into the camera.
•Be sure your camera’s firmware is up to date. It is a good idea to make sure your NVR firmware is up to date as well. Even though camera firmware might be up to date. The camera may still not work properly or simply may not be compatible.
•If you are connecting your cameras to a network and not directly into your POE ports, please make sure your NVR is also connected to that same network! The NVR and camera must be in the same LAN to find one another.
•The built in PoE ports have an internal switch set to 10.1.1.1. Please make sure your camera is set in range of the built-in switch address. Your IP camera must match the subnet of the internal POE switch.
•Setting your cameras to DHCP to adapt to the new environment is a good idea if you are not too familiar with static IP addresses. Once done we recommend setting it back to a static IP address.
•If you require any assistance getting 3rd Party Cameras working on your NVR, you can reach out to our technicians to see if we can help. Keep in mind that we will need the Model Number camera you are trying to connect to do research on compatibility. We cannot guarantee any 3rd party cameras to function or have complete access to every feature from the NVR.
•Some cameras may need to be reset to find the username/password combo, referring to the original owner’s manual or contacting the manufacturer of the camera may be necessary. Note that some cameras may need to be re-initialized after performing the reset before being used on the Blue Line NVR.

DVR/NVR Rebooting

If your DVR or NVR is rebooting by itself please read the guide below.

If your DVR or NVR is rebooting once a week this is completely normal. Our DVR and NVR systems are designed to reboot once a week (Tuesday at 2AM by default).

If your DVR or NVR is rebooting more frequently you first want to check the power source of the DVR or NVR.

Be sure you are using the correct Power Source that was included with the DVR or NVR. Below are the correct power adapter specs so you can identify the correct one.

NVRCUBE = 12V, 2.0Amp NVRWIFI = 12V, 2.0Amp

LITE Series DVR = 12V, 2.0Amp

Pro Series DVR = 12V, 5.0Amp

Pro Series NVR = 3 Prong Power Cord to Power Outlet Extreme Series DVR/NVR = 3 Prong Power Cord to Power Outlet

If you can confirm you are using the correct Power Adapter you may need to double check the outlet you are plugged into. Try an alternate outlet and eliminate any Battery Backup Power Supplies for test purposes.

If the power source is not causing the reboot cycle it could be related to the internal hard drive. To check this out please continue reading.

First you will need to Power Off the DVR. We suggest powering the system down from the Power Switch on the rear of the system or by simply unplugging the Power Cable.

Once the system has been powered down you will need to open up the system. Please see below to locate the screws that need to be removed.

NVRCUBE or NVRWIFI

There will be 4 Phillips head screws located on the bottom of the system. Once the screws are removed the top cover will lift off.

Lite Series DVR

There are 2 Phillips head screws located in the rear and 2 on the side of the DVR, 1 on each side. Once the screws are removed the top cover will lift off.

Pro Series DVR/NVR

There will be 4 Phillips head screws located on the rear of the system. Once the screws are removed the top cover will slide towards the rear and lift off.

Extreme Series DVR/NVR

There will be 2 Phillips head screws located on the rear of the system. Once the screws are removed the top cover will slide towards the rear and lift off.

Once the top cover has been removed it will expose the Hard Drive and its connections.

image16 584w343h

First we want to Unplug the Large Black Connector. Press down on the metal tab and pull the connector out of the Hard Drive.

image17 522w240h

Now we want to unplug the second smaller connector (Blue Cable) from both ends. Press down on the tab and remove from the Hard Drive as well as the System Board.

image18 532w251h

image19 535w224h

Once the connections have been disconnected. Plug them back in securely and listen for the metal tab to click. This will ensure a good connection in between the System Board and Hard Drive.

Note*

While you still have the system open, it might be a good idea to check the cooling fans for any dust or debris that could be stopping the fan from moving. This could cause the DVR or NVR to overheat.

Once the connections are tight, lets put the top cover back on. When the cover is back on you can proceed to power on the system. Once the system is powered on you will need to monitor the system and check if it is still rebooting.

Disconnecting The Internet

If the system is still rebooting you may want to disconnect it from your Router or Modem by unplugging the Ethernet cable in the rear. You will loose your remote viewing capabilities temporarily while unplugged but can help us diagnose the issue.

With the cable unplugged you may want to monitor the system closely to see if this has made any changes to the rebooting issue.

Disconnecting Cameras and Other Sources

Disconnecting cameras, alarms, extra monitors and microphones is the last thing we can try to solve your rebooting issues.

Cameras, monitors, and microphones mounted near high voltage could be causing your system to reboot by itself. If your system detects any incoming voltage or amperage coming into the rear inputs the system will shut down to protect itself from damage.

Leave your main Display Monitor and Power Source connected. Disconnect one input at a time to see if it makes a change in your reboot cycle. If you notice a change in the rebooting you can single it out by using this method of elimination.

]]> https://www.xvraid.com/guide/blue-line-ip-camera-troubleshooting-v2.html/feed 0 How to Configure Light Settings on Hikvision Cameras https://www.xvraid.com/how-to/how-to-configure-light-settings-on-hikvision-cameras.html https://www.xvraid.com/how-to/how-to-configure-light-settings-on-hikvision-cameras.html#respond Mon, 22 Apr 2024 11:13:07 +0000 https://www.xvraid.com/?p=5623 How to Configure Light Settings on Hikvision Cameras, Hikvision’s Smart Hybrid Light cameras offer a versatile solution for those who are unsure whether a black and white IR picture or ColorVu mode is best suited for a particular scene. These cameras feature both IR and white LEDs that can be used independently, allowing you to customise your lighting setup to suit your needs. Additionally, the cameras can automatically switch from IR mode to colour mode when a person or vehicle triggers an event you have set up.

This guide explains the setup for each option so that you can determine which one is best suited for your needs and scene..

How to find the camera’s light settings in its web interface:​

Even if the camera is connected to an NVR, before anything, you will need to log into the camera directly to access the advanced image and light settings to enable the different light modes, as these are not accessible from an NVR.
.

1.Use the camera’s IP address or the NVR’s virtual host feature to access the camera’s login page.
2.When you are in, go to: Configuration→Image→Display Settings→Day/Night Switch

By default, your camera will be set to remain in ‘ColourVu only’ mode during low-light, meaning the white light will be constantly on when it is dark and never use its IR. The below sections will show you on how to configure the new ‘Smart Hybrid’ mode, ‘IR only’ mode, and ‘ColorVu only’ mode.
.

.

How do I set my camera to Smart Hybrid mode:​

This mode is utilises both the IR and white LEDs built into your camera. It is useful as it allows you to keep your cameras to stay discreet in IR mode while there is no activity in your scene, and then switch to full colour when a person or vehicle is detected by putting white light on the scene, providing you with all of the additional information a colour image offers while also acting as a deterrent.

Here are the steps to enable this mode:
.

1.Firstly, you must enable an event and specify your target types, as without this, the camera will not know when to switch modes.
2.Set the Day/Night Switch dropdown to Auto, as this will tell the camera to automatically to switch on its LEDs for night-vision when it detects that it is beginning to get dark.
3.The Sensitivity dropdown relates to the photo resistance (or amount of ambient light in the scene) needed for the automatic switchover to night mode. We recommend keeping this at 4, and adjusting it at your discretion. Simply put, the higher you set this, the darker the scene needs to get for the switchover to night mode.
4.The Filtering Time slider is best left as 5 (seconds) for most scenes. This determines the delay, in seconds, of the switch over from day to night mode, once the photo resistance threshold has been met.
5.It is advisable to set the Smart Supplement Light to ON. This is helpful for offsetting any overexposure you might see on objects close to the camera, as it allows the camera to automatically determine the strength of the IR or white light it puts on different areas of the scene, depending on how close an object is.
6.Select Smart from the Supplement Light Mode dropdown, which means the camera will switch from IR to ColorVu mode when a person or vehicle enters the scene.
7.We recommend keeping the Light Brightness Control at Auto. This is like the Smart Supplement Light, but allows the camera to determine the best overall brightness setting for the IR or white LEDs for the scene. When set to Auto, the camera will ignore whatever brightness you set on the slider(s) beneath this dropdown.

.

How do I set my camera to ‘IR only’ mode:​

This mode is recommended if you would like the camera to be as discreet as possible and your scene is dark at night, as the camera will use its IR LEDs all the time at night and then switch back to colour during the day, meaning the white light is never used.
.

1.Set the Day/Night Switch dropdown to Auto, as this will tell the camera to automatically to switch on its IR LEDs for night-vision when it detects that it is beginning to get dark.
2.The Sensitivity dropdown relates to the photo resistance (or amount of ambient light in the scene) needed for the automatic switchover to IR mode. We recommend keeping this at 4, and adjusting it at your discretion. Simply put, the higher you set this, the darker the scene needs to get for the switchover to IR.
3.The Filtering Time slider is best left as 5 (seconds) for most scenes. This determines the delay, in seconds, of the switch over from day to IR mode, once the photo resistance threshold has been met.
4.It is advisable to set the Smart Supplement Light to ON. This is helpful for offsetting any overexposure you might see on objects close to the camera, as it allows the camera to automatically determine the strength of the IR it puts on different areas of the scene, depending on how close an object is.
5.Select IR Supplement Light from the Supplement Light Mode dropdown, which means the camera will switch to IR mode at night, and stay in IR mode during event periods.
6.We recommend keeping the Light Brightness Control at Auto. This is like the Smart Supplement Light, but allows the camera to determine the best overall brightness setting for the IR LEDs for the scene. When set to Auto, the camera will ignore whatever brightness you set on the slider(s) beneath this dropdown.

How to Configure Light Settings on Hikvision Cameras

How do I set my camera to ‘ColorVu only’ mode:​

This is the opposite to IR mode, as the camera will turn on its white light at night and keep it constantly on, meaning that its IR is never used. This mode is ideal if you are not worried about the camera being discreet and prefer a colour picture 24/7.
.

1.Set the Day/Night Switch dropdown to Auto, as this will tell the camera to automatically to switch on its IR LEDs for night-vision when it detects that it is beginning to get dark.
2.The Sensitivity dropdown relates to the photo resistance (or amount of ambient light in the scene) needed for the automatic switchover to IR mode. We recommend keeping this at 4, and adjusting it at your discretion. Simply put, the higher you set this, the darker the scene needs to get for the camera to switch on its white LED.
3.The Filtering Time slider is best left as 5 (seconds) for most scenes. This determines the delay, in seconds, before the camera turns on its white LED, once the photo resistance threshold has been met.
4.It is advisable to set the Smart Supplement Light to ON. This is helpful for offsetting any overexposure you might see on objects close to the camera, as it allows the camera to automatically determine the strength of the light it puts on different areas of the scene, depending on how close an object is.
5.Select White Supplement Light from the Supplement Light Mode dropdown, which means the camera will switch on its white LED at night, and never switch to IR mode.
6.We recommend keeping the Light Brightness Control at Auto. This is like the Smart Supplement Light, but allows the camera to determine the best overall brightness setting for the white LED for the scene. When set to Auto, the camera will ignore whatever brightness you set on the slider(s) beneath this dropdown.

How do I find my Hikvision device and edit its network settings?

You probably want to be able to view your camera feeds remotely wherever you are; either in a web browser, the iVMS-4200 software, or the Hik-Connect mobile app. All IP CCTV devices communicate over your LAN (local network) and have a unique location on the network. So, you will need to be able to locate where the device you want to view is and make sure it has the right settings for it to work on your LAN. You will then be able to access the device from a PC or mobile device, and connect it with the rest of your CCTV system.

Please follow the steps beneath to find and correctly set your Hikvision device’s network settings.
.

.

Step 1:
.

The first step is to work out if you need Hikvision’s SADP tool or not. If you only need to discover and access an NVR and some Plug and Play cameras connected directly to its PoE ports, then you don’t need to use it.​

​

​

If you aren’t using the SADP tool:​

​

Or, on the NVR’s local GUI (Graphical User Interface – when operating the recorder from a connected monitor and mouse), go to:​

​

System → Network → TCP/IP​

​

Here, you can view and change the NVR’s network settings to match your LAN which is explained in step 2 – you can then ignore the rest of the steps.​

​

​

If you are using SADP:​

​

If your cameras are connected to your LAN, rather than to an NVR’s PoE ports, you will need to install the SADP tool. This scans for all Hikvision devices on your LAN by their MAC addresses. Now, follow steps 2-5 below.​

Step 2:

​

You now need to identify some of your LAN’s settings, which you need to set to match on your devices.​

​

From a Window’s PC, you will need to use the Command Prompt tool to find these.​

​

If you’re using a Mac, then you can find these by launching System Preferences, and then going to:​

​

Network → Advanced (make sure your Wi-Fi/Ethernet connection is selected on the LHS) → TCP/IP​

​

​

Make a note of the following numbers, as you will need to use them when changing your device’s network settings:​

​

IPv4 Address – This is the IP address of the computer that you are using. This address is therefore already occupied, so you will not be able to assign any other devices to this specific address. The digits after the final decimal point indicate where the device is located within the range of your local network, which spans 1-254. You’ll need to change the number after the third period (or full stop/dot) to something that is between “1” and “254” and not already occupied by another device on the LAN.​

​

NB – Please see these guides for instructions on checking if a proposed IP address is occupied:​

​

How-to: How do I find my router and PC’s IP address using a Windows PC?​

How-to: How do I find my router and Mac’s IP address using a Mac?​

​

Subnet Mask – This shouldn’t need to be changed on the NVR, it will usually be “255.255.255.0”.​

​

Default Gateway – This is the IP address that’s been assigned to your router. Any device being added to your system needs to be within the range of your gateway in order to be discoverable.​

.

1621424905360

1621424741672

Step 3:

​

Now, launch the SADP tool again. It should show a list of all the Hikvision devices on your local network and their default network settings. Provided the device is being powered and has a connection to your LAN, then it will show up here. You can also alter the device’s network settings here, and check things like the model number, serial number, the firmware version installed on it.​

​

NB – Remember that any camera that is directly connected to your NVR’s PoE ports will not show up in SADP. This is because the NVR hides any cameras directly connected to it from SADP on its own “subnet”, which is separate from your local network. Don’t worry though, as you won’t need to change the settings for these cameras. ​

.

sadp list 1

Step 4:

​

Tick the box beside your device to view and edit the network settings.​

​

If the device hasn’t yet been connected to the network then it will show as “Inactive”. You will be asked to set a password for it when you click the tick-box for it. For more instructions on activating your device, please see Part 6.​

​

sadp acivate %EF%80%A2 set password

​

.

activation successful

.

​

Once activated, ticking the box beside your device will change the network settings in the “Modify Network Parameters” window, so that they match your LAN. You need to make sure that you enter the password for that device before clicking “Modify” for these changes to be saved.​

​

modify network settings

.

parameters modification completed

Step 5:
.

Check that these changes have been reflected in the SADP device table – you may need to wait a few minutes before refreshing. If they have, then you should be to carry on with getting this device connected to the rest of your system.​

​

NB – If you aren’t the camera’s first owner then you will need to perform a hard reset on it. This will reset the device to its inactive factory state so that you can set new password by activating the camera in SADP. Once this has been done, SADP will allow you to modify each network setting edit the network settings to match your LAN so that you can use the device standalone or add it to your NVR remotely.

How do I set up events and email or push notifications on my Hikvision camera?

Video Analytics, or “VCA events”, are some of the most useful features available on a Hikvision camera. Using these will mean that your footage is analysed in real-time for any activity or abnormalities with your system that you would like to receive an alert for. The different events that are available currently (which ones are available varies which each model of camera) include:

This guide will cover the setup of three of the most popular event options:

Motion Detection – This is one of the first AI options that was introduced and will analyse your footage for any moving object in a specified part of your scene and can alert you as soon as it is detected. As it detects motion in its most basic sense, it uses less of a camera or NVR’s processing power than the other event options, meaning it is always available regardless of your video compression settings.

If you are not using a device with AcuSense then this option will give you the most false-positive alerts, as it offers the fewest ways for filtering out moving objects that you are not interested in, such as object size and the direction or duration of the motion.

Intrusion Detection – This is similar to motion detection in that it will alert you when a moving object is detected within a predefined “intrusion zone”. However, this is better if you want more control over when you are alerted as it will only notify you when a moving object enters the zone, rather than whenever movement occurs within it. This event type also allows you to specify the size of trigger objects, as well as how much of an object enters the zone and for how long before you are alerted.

Line Crossing Detection – This option is particularly useful for various entrances, boundaries, and roads, etc., as it allows you to draw a line in your scene so that you are notified when an object moves across that line. Importantly, you can specify the direction(s) of movement across the line on which you are notified. Like intrusion detection, you also have more control over the size of the trigger object and how much of it must cross the line.
.

Note – Before starting, you will need to check that your Default Gateway and DNS Server are correctly set up in your device’s network parameters, as these need to be right in order for you to be sent email notifications. To check these, please see part 2.​

​

.

Section 1: Setting up motion detection​

​

Step 1:​

Connect to your device’s web browser interface by browsing for its IP address and log into it. If it is recording to an NVR, then connect to this, as this is where you should set your events from.​

.

Step 2:​

Once you’re in, navigate to:​

​

Configuration → Event → Basic Event → Motion​

​

If you’re using an NVR, select your camera from the “Camera” dropdown.​

​

1 page select camera

​

Note – To set one of the other VCA event options, you’ll need to go to “Smart Event” rather than “Basic Event”, where you will be shown a list of tabs with all the other available events on your camera. ​

​

Step 3:​

Tick the “Enable Motion Detection” box.​

​

2 enable motion detection

​

Step 4:​

Decide if you want to enable “Dynamic Analysis for Motion”. When this is turned on, green squares will show on anything that triggers motion detection in the camera’s feed, which can help with identifying exactly what has triggered the event.​

​

3 enable dynamic analysis

​

Note – Cameras usually determine what is ‘motion’ in your scene by detecting pixel changes in the image, as a large amount of pixel change usually indicates movement. However, if there is lots of visible noise in your image due to gain control in low light, you will probably see a high number of false alerts on the camera. Using one of the more advanced event types, or the camera’s built-in LEDs to illuminate the scene, will help here. ​

​

Step 5:​

Once you’re happy with the view of your scene, click on the hexagon or “Draw Area” button in “Area Settings”, which will allow you to use your mouse to draw the area within which you would like motion detection to be active.​

​

On Easy IP 3.0 and earlier cameras, These areas will be indicated by a red grid or polygon that appears when you click on part of the scene.​

​

The newer cameras will get you to draw one solid shape for each of your detection areas by left-clicking to set each point of that shape. When you have set all the points that you need, right-clicking will complete the shape and allow you to draw any others that you need.​

​

To clear your zones, just click the cross or “Clear All” button.​

​

Note – If you are not using an AcuSense camera or NVR, then you should make sure that the edges of your detection zones are not on top of anywhere that is likely to see a lot of movement, shadows, or reflections (e.g. roads, foliage, windows or the sky), to mitigate the number of false triggers. ​

​

4 draw zone

​

​

Step 6:​

If you’re using an EasyIP 4.0 camera, draw any more detection zones that you need by repeating step 5 above.​

​

5

​

​

Step 7:​

Adjust the “Sensitivity” bar if you need, which determines how sensitive the detection is to pixel changes. The higher the sensitivity, the more easily motion detection is triggered, meaning you will receive more alerts as a result.​

​

A good starting point for the sensitivity is 60, but you will likely need to tweak this yourself over time to identify the optimum setting for your scene.​

​

If there is lots of activity in your scene, then avoid setting the sensitivity too high so that you don’t receive lots of false-positive triggers.​

​

Note – In the case of Line Crossing and Intrusion Detection, the sensitivity setting refers to the amount of an object that is needed to cross the line, or enter the box that you’ve drawn, before the event is triggered. ​

​

6 sensitivity

​

.

Step 8:​

If you’re using AcuSense features, then use the “Detection Target” boxes to specify what you want to trigger the event. You can select both “Human” and “Vehicle” here if you are interested in both.​

​

7 detection target

.

Step 9:​

Click “Save” at this point so that you don’t lose these settings. ​

​

You’ll now need to go to the “Arming Schedule” and “Linkage Method” pages to set when you would like the event to be active, and what you would like to happen on triggers.​

​

Please refer to sections 4 and 5 below for instructions on how to set these things.​

​

.

Section 2: Setting up line crossing detection​

Step 1:​

In a web browser, go to:​

​

Configuration → Event → Smart Event → Line Crossing Detection​

​

If you’re using an NVR, select your camera from the dropdown at the top of the page.​

​

1 line crossing page camera dropdown

​

​

Step 2:​

Tick the “Enable Line Crossing Detection” box.​

​

2 enable line crossing

​

​

Step 3:​

Click on the line button or “Draw Area” to draw your line on the video feed – you can move, rotate or resize however you like. ​

​

3 draw first line

.

Step 4:​

Set your maximum and minimum target sizes by clicking the size filter buttons, and drawing these on the camera preview.​

​

Anything that crosses your line and is smaller than your minimum box, or larger than the maximum box, at the point of the line, will not trigger the event.​

​

You should use objects or vehicles in the scene to guide you here. For example, I have set the minimum target size to be slightly smaller than any car that’s near where I’ll draw my line, and the maximum to be slightly larger than a large HGV.​

.

Note – It doesn’t matter where boxes are on the feed. Also, these boxes will only be visible on this event page, and will not show up on your footage in the live view or playback pages. ​

​

4

.

Step 5:​

If you’re using an AcuSense camera or NVR, then specify the “target(s)” that you would like to trigger the event by ticking the box. There is no issue with ticking both “Human” and “Vehicle” here. ​

​

5 detection target line crossing

​

​

Step 6:​

Specify your “Direction”, which refers to the direction from which an object much cross your line to trigger the event. The different options available are explained beneath:​

​

A<->B – Any object crossing from either direction will trigger​

​

A->B – Any object crossing from side “A” to side “B” will trigger (In this case, from left to right)​

​

A<-B – Any object crossing from “B” to “A” will trigger (In this case, from right to left)​

​

6 direction

​

​

Step 7:​

Adjust the sensitivity bar to suit your needs. Setting this high will reduce the amount of an object that is needed to cross your line before this is triggered. This will, of course, result in more triggers. As the optimum setting here depends on how busy your scene is, we recommend starting at 60 and then adjusting the bar over time until you find the best results. ​

​

7 sensitivity

​

​

Step 8:​

Use the “Line” dropdown to select and draw any more lines, repeating steps 2-8 above.​

​

8 more lines

.

Step 9:​

Click “Save” at this point so that you don’t lose these settings. ​

​

You’ll now need to go to the “Arming Schedule” and “Linkage Method” pages to set when you would like the event to be active, and what you would like to happen on triggers.​

​

Please refer to sections 4 and 5 below for instructions on how to set these things.​

​

​

.

Section 3: Setting up intrusion detection​

​

Step 1:​

In a web browser, go to:​

​

Configuration → Event → Smart Event → Intrusion Detection​

​

If connected to an NVR, select your camera from the dropdown at the top of the page.​

​

1 page select camera 1

.

Step 2:​

Tick the “Enable Intrusion Detection” box.​

​

2 enable intrusion detection

.

Step 3:​

Click on “Draw Area” to draw your intrusion zone (or “Detection Area”) on the video feed, which can be a 3 or 4 sided shape. Left-click on the camera preview to set each of these points. Once your zone is drawn, you can still move each of the points to change the shape to better fit your area of interest.​

​

Note – If the edges of your zone are very close to a road, foliage, or anywhere that is likely to see lots of movement, then you will likely see a number of false-positive alerts. This is because any movement on these lines can trigger the event. If you can, you should allow for a bit of a gap between these parts of the scene and your intrusion zone. ​

​

3 drawing zone 1

​

​

Step 4:​

Set your maximum and minimum target sizes by clicking the “Size Filter” buttons, and drawing these on the live camera feed above.​

​

Anything that enters your configured intrusion detection zone and is smaller than your “Min” box, or larger than the “Max” box, will not trigger the event.​

​

You should use objects or vehicles in the scene to guide you here. For example, I have set the minimum target size to be smaller than the smallest person I’d expect to see in that part of the scene, and the maximum to comfortably cover a very tall person.​

​

Note – It doesn’t matter where boxes are on the feed. Also, these boxes will only be visible on this event page, and will not show up on your footage in the live view or playback pages. ​

.

3

.

Step 5:​

If you’re using an AcuSense camera or NVR, then specify the “target(s)” that you would like to trigger the event by ticking the relevant box. There is no issue with ticking both “Human” and “Vehicle” here.​

​

4 detection target

.

Step 6:​

Now, adjust the “Threshold” bar as you need. This can be set between 1 and 10 seconds and refers to how long an object needs to be within your intrusion zone before triggering the event. For example, setting this to “0” will mean that the event is triggered as soon as a valid target enters your zone.​

​

5 threshold

.

Step 7:​

Adjust the sensitivity bar to suit your needs. Setting this high will reduce the amount of an object that is needed to enter your zone before the event is triggered. This will, of course, result in more triggers. As the optimum setting here depends on how busy your scene is, we recommend setting this to 60 and then adjusting the bar over time until you find the best results.​

​

6 sensitivity 1

​

​

Step 8:​

Use the “Region” dropdown to select and draw any more intrusion zones, repeating steps 2-6 above.​

​

7a more regions dropdown

​

Step 9:​

Click on the “Arming Schedule” tab and set this by filling in the hours you want the event to be enabled for in blue.​

​

Note – Please see section [1] step 9 above for a more detailed explanation on how to set your arming schedule. ​

​

​

Step 10:​

Click “Save” at this point so that you don’t lose these settings. ​

​

You’ll now need to go to the “Arming Schedule” and “Linkage Method” pages to set when you would like the event to be active, and what you would like to happen on triggers.​

​

Please refer to sections 4 and 5 below for instructions on how to set these things.​

.

.

Section 4: Setting the Arming Schedule for your events​

Now that you have set your “Area Settings”, click on the “Arming Schedule” tab to set when the event will be active.

This will bring up a timeline with the week broken up into days and hours – depending on the device that you are using, it might look different to the grid below. If a period is filled in blue then the event will be active (or “armed”) for that hour; If the period is white, the event will be off.

Use your mouse to draw up the weekly Arming Schedule that suits. You can also use the popup box that appears when you click on any blue period to finely adjust the start arming times:
.

8 draw recording schedule

Clicking on the “Erase” button and then a blue period will allow you to clear the arming:
.

10 erasing record schedule

When you’re happy with this schedule, click “Save”.

.

.

Section 5: Setting up email & push notifications for your events​

.

Click on the Linkage Method tab on the event’s page (shown above), which is where you will set up your email notifications, as well as other alert types.​

​

The different options are explained below:​

​

Audible Warning: This will cause the NVR / browser to bleep when on event triggers.​

Send Email: This will set the NVR to email you on event triggers, with a screenshot of the camera’s view at the time.​

Notify Surveillance Centre: This refers to Hik-Connect and needs to be activated in order to receive push notifications in Hik-Connect.​

Full Screen Monitoring: This will get the NVR to automatically throw up a camera’s live feed in full screen during a trigger for an event set on that camera.​

​

11 linkage method

​

.

.

To enable Hik-Connect push notifications:​

.

To set up push notifications, you need to make sure that Notify Surveillance Centre is ticked as a “Linkage Method”.​

​

You also need to make sure that push notifications are enabled for Hik-Connect in your phone’s settings. To enable them via the app, go to:​

​

More → Settings → Enable Push Notification​

​

​

1615991840232

……..

1615991867476

.

]]> https://www.xvraid.com/how-to/how-to-configure-light-settings-on-hikvision-cameras.html/feed 0 XMEYE DVR User Manual https://www.xvraid.com/general/xmeye-dvr-user-manual.html https://www.xvraid.com/general/xmeye-dvr-user-manual.html#respond Wed, 27 Sep 2023 18:49:24 +0000 https://www.xvraid.com/?p=2916
XMEye DVR is video monitoring software for IPC and DVR. With cloud technology, easy log in by the device’s serial number to show the live view monitoring video to Android phone and do operation accordingly.

.

1Basic operation

Note: The button in gray display indicates nonsupport.

1.1Turn on

Plug the power supply and turn on the power supply switch. Power supply indicator light shining indicates turning on the video recorder. After the startup you will hear a beep. The default setting of video output is multiple-window output mode. If the startup time is within the video setting time, the timing video recording function will start up automatically. Then the video indicator light of corresponding channel is shining and the DVR is working normally.

Note:1. Make sure that the input voltage corresponds with the switch of the DVR power supply.

2. Power supply demands: 220V±10% /50Hz.

Suggest using the UPS to protect the power supply under allowable conditions.

1.2Turn off

There are two methods to turn off the DVR. Entering [main menu] and choosing [turn off] in the [turn off the system] option is called soft switch. Pressing the power supply switch is called hard switch. Illumination:

1、Auto resume after power failure

If the DVR is shut down abnormally, it can automatically backup video and resume previous working status after power failure.

2、Replace the hard disk

Before replacing the hard disk, the power supply switch in the real panel must be turned off.

3、Replace the battery

Before replacing the battery, the setting information must be saved and the power supply switch in the real panel must be turned off. The DVR uses button battery. The system time must be checked regularly. If the time is not correct you must replace the battery, we recommend replacing the battery every year and using the same battery type.

2 / 111

.

.

Note: The setting information must be saved before replacing the battery otherwise information will lose.

1.3System Login

When the DVR boots up, the user must login and the system provides the corresponding functions with the user purview.There are two user settings. The names are admin,and default and these names have no password. Admin is the super user purview; default‟s permissions are preview and video playback. User admin‟s password can be revised, while their permissions can‟t be revised; user default is the default login user whose permission can be revised but not its password.

Picture 1 425w253h

System Login

Password protection: If the password is continuous wrong three times, the alarm will start. If the password is continuous wrong five times, the account will be locked. (Through reboot or after half an hour, the account will be unlocked automatically).

Safety Question：When you forget the password,you can click „?‟ to enter the reset password page. Note: The default is no safety question.You can set the safety question on the account page . If the answer is continuous wrong six times,the page will be locked(you have to reboot the device to continue the operation)

3 / 111

.

.

Picture 2 461w400h

Safety question

1.4 Preview

Preview

The date, time, channel name, channel stream value, channel resolution, the channel signal mode (most models support), etc. are shown in each preview screen, The surveillance video and the alarm status are shown in each window.

4 / 111

.

.

Preview icon

1.5 Boot wizard

Provide fast setup to wizard configuration parameters. Including boot wizard, two-dimensional code and digital channel configuration wizard, click “Next” to enter the digital channel configuration wizard.

Boot wizard:

Picture 3 577w348h

Boot wizard interface

[Do not Display] select the highlighted ■ expressed after reboot, no longer automatically pop up boot wizard.

[Next] enter the digital channel configuration wizard interface.

[Cancel] to save the settings and exit this screen wizard interface.

5 / 111

 

XMEYE DVR User Manual

Read Next : XMEYE &#8211; How to connect DVR/NVR on PC Mobile Browser

All Xmeye Devices Articles : https://www.xvraid.com/?s=xmeye

.

.

Picture 4 494w367h

Network test

Network Test ：Green OK means connect to network successfully,red ERR means failed；

【Retry】Click “Retry” to test the network again；

【Network】click it to set the device network setting；

【Skip】Click it to skip this network test

【Next】Click “Next”, will pop up APP and SN QR code,

QR Code

Picture 5 255w154h

Picture 6 249w150h

QR code interface

【Next】Click ”Next”, will pop up mode selection.

Mode selection:

6 / 111

.

.

Picture 7 577w349h

Mode selection

【Quick set】select the Quick set to enter the digital channel configuration wizard and start to search the remote device IP in the same LAN automatically, and then add the IPC to the backend device in accordance with the order of search, and you can cancel this process manually;

【Auto-connected mode】The back-end device can modify the remote ipc device to the same network segment which are under the same LAN and automatically completes the addition; when the function is enabled, the boot wizard ends；

【Manual mode】Select the manual mode to enter the digital channel configuration wizard, you can set shortcuts for digital channels;；

NOTE: After using this function, the parameters in the configuration of all digital channels will be updated, please caution.

7 / 111

.

.

Picture 8 575w399h

Digital Channel Configuration Wizards

Label meanings:

1 Û8ÛN(TVI)

CAM01 S «S

1OaON(TVI)

CAM02BO

2(

1Û8ÛN(TVI)

CAM03S4.S

□ 17-01-21 16:23:46 SMA

1ÛÊÛN(TVI)

CAMO4 B «El

iobon(tvi)

lOÔON(TVt)

10&0N(TVI)

10BQN(TV|)

CAM05E«H

* CAMWf  1

CAM07S4.S

CAM08a«S

1OBON(TVl)

1OaON(TVI)

1080N(TVl)

1060N(TVI)

CAM09aS  

CAM 10 SH

CAM1iaS  

CAM12BS

10SON(TVI)

10a0N(TVI)

lOBON(TVI)

1080N(TVI)

CAM 13 ad  

CAM 14 as  

CAM 1 5 as  

CAMlOaS

1

.

Recording status

4

a

Video loss

2

.

.

.

Motion detect

5

.

.

.

Video blind

.

Art

.

.

|lJ

.

.

.

.

.

.

.

3

.

.

.

Audio

6

.

.

.

Camera lock

.

■&

.

.

a

.

.

.

.

.

.

.

7

^^^^]

The maximum resolution

8

.

AHD&TVI & CVI  Signal

switch

9

^H

Channel  stream  value

(some model can support this)

.

.

.
1.Search protocol selection

Includes three search methods, respectively NETIP, ONVIF, ALL

2.Search

Search device

3.Add

Add device

4.Network Settings

The device can be set remotely channel, user name, password; click the Network Settings button, you can set the network of the device, including IP, subnet mask, default gateway (ONVIF protocol devices cannot make network settings).

Picture 9 576w249h

8 / 111

.

.

Network settings

5.Hotkey settings

Configure all channels by one key.

6.Equipment list display area

This area displays the discovered devices.

7.Delete

Select the device has been configured, click Delete, you can delete the device

8.Clear

Clear all configured channels

9.encoding settings

You can set the front end configured coding

10.Copy to

Some information of selected channels can be copied to other channels, such as user name, password, and other device information, as shown below:

Picture 10 529w361h

是控制监控设
备移动的按钮
吗（上下移动
吗？）

Copy to

11.Up and down keys

Click the device in the list, click up and down buttons to move the device up and down.

12.Configuration Status

Configuration status of each channel, including not configured, connected, not online

13.configuration front-end information

The information of the front-end configured, user name, password can be set in this area.

9 / 111

.

.

14.Previous

Return to the previous screen and that is the boot wizard interface.

15.Next

Add the selected device to the appropriate digital channels, and then enable the channel; the remaining non-selected digital channel is not enabled.

16.Exit

Return to the preview screen.

1.6 Desktop shortcut menu

In preview mode you can right click mouse to get a desktop shortcut menu,as the picture shows. The menu includes: main menu, Guide, Quick set, record mode, playback, IPC param,PTZ control, coaxial control,TVI&AHD signal switch、High Speed PTZ, Alarm Output, color Setting, Output adjust, Logout,

view mode shift.

Picture 11 225w394h

Shortcut Menu

1.1.1Main menu

When you login, the system main menu is shown as below.

10 / 111

.

.

Picture 12 577w349h

Main Menu

1.1.2Record Control

Please check current channel status: “○” means it is not in recording status, “•” means it is in recording status.

You can use desktop shortcut menu or click [system]> [record]> [record mode] to enter the recording control interface.

Picture 13 441w261h

Record Mode

【Schedule】Record according to the configuration.

【Manual】Click the all button and the according channel is recording no matter the channel in any state.

11 / 111

.

.

【Stop】Click the stop button and the according channel stops recording no matter the channel in

any state.

1.1.3Playback

There are two methods for you to play the video files in the hard disk.

1、In the desktop shortcut menu.

2、Main menu>Record->Playback

Note: The hard disk that saves the video files must be set as read-write or read-only state.

Picture 14 575w320h

Picture 15 570w321h

12 / 111

.

.

video playback

【Listed files】Look up the listed files that accord with the searching criteria.

【File Attributes】Look up the found file information.

【Playback control】See detail in below chart

Playback control key

Note: play under frame by frame, the playback status should be paused firstly.

Special functions：

Accurate playback：Input time (h/m/s) in the time column and then clicko button. The system can operate accurate playback according to the searching time.

Local zoom：When the system is in single-window full-screen playback mode, you can drag your mouse in the screen to select a section and then left click mouse to realize local zoom. You can right click mouse to exit.

Note: When current resolution of the channel is over Max resolution, to playback this channel, will show a Red “X”.

13 / 111

.

.

1.1.4Alarm output

Please check current channel status: “○” means it is not in alarming status, “•” means it is in alarming status.

You can use desktop shortcut menu or click [main menu]> [alarm]> [alarm output] to enter the alarm output interface.

*Some series have no alarm output

Picture 16 510w292h

Alarm output

【Configuration】Alarm is on according to the configuration.

【Manual】Click the all button and the according channel is alarming no matter the channel in any state.

【Stop】Click the stop button and the according channel stops alarming no matter the channel in any state.

1.1.5PTZ control

*PTZ control is a little different between hybrid mode & full digital mode:

Digital channel – the digital channel need link PTZ, the remote device should connect with PTZ and with protocol correctly set also.

Analog channel – Only when the device is connect with PTZ and configure protocol correctly is ok.

1

Playback control

2

Operation

3

Video type

4

Time display

5

Switch by time/file

6

Search the file

7

Channel selection

8

Date selection

9

HDD selection

10

Synchronous

11

Time display

12

Listed files

13

File Attributes

.

.

.

.

.

.

Button

Function

Button

Function

S3/ S3

Play/Pause

ô

Backward play

O

Stop

E

Slow play

El

Fast Rewind

□

Fast Forward

.

Previous frame

.

Next frame

El

Previous file

El

Next file

EJ

Round play

.

Full screen

El

Edit

El

backup
1.Operation interface is as followed. The functions include: PTZ direction control, step, zoom, focus,

14 / 111

.

.

iris, setup operation, patrol between spots, trail patrol, boundary scan, assistant switch, light switch, level rotation and so on.

Note1. Decoder A(B)line connects with DVR A(B)line. The connection is right.

2.Click [main menu] >[system configuration] >[PTZ setup] to set the PTZ parameters.
3.The PTZ functions are decided by the PTZ protocols.

Picture 17 552w313h

PTZ

【Speed】Set the PTZ rotation range. Default range: 1 ~ 8.

【Preset】Add, delete, call preset

Add: Input preset numbers in the preset number box,and rotate the PTZ to the designated position by controlling the direction control key and then click the “+”button to complete adding;

Preset point deletion: input the preset number which you want to delete in the preset number box ,click “-” button to complete the deletion of preset points;

Preset point call: fill in the preset point number in the preset number box ,click on the start button to call the preset point.

[Zoom]  / Q button to adjust the zoom multiple of the camera.

【Hide】 Current interface will be temporarily hidden after click it.

【 Direction control 】 Control the PTZ rotation. 8 directions control is supportive.(4 directions in

Front panel is supportive )

【High speed PTZ】 Full-screen show channel image. Left press mouse and control PTZ to rotate

orientation. Left press mouse and then rotate the mouse to adjust the zoom multiple of the camera.

【Advanced】enter the advanced PTZ settings interface, you can point to the cruise cruise, patrol,

15 / 111

.

.

focus and other operations;

【Page switch】Switch between different pages.

【Cancel】Exit the PTZ function

2.Click [Page Switch] button, then you can set auxiliary function. Auxiliary number corresponding to auxiliary switch on the decoder.

Picture 18 551w312h

Auxiliary Function Control

【 Intuitive Auxiliary Operation 】 choose auxiliary equipment, select Open or Close button, switch control；

【Auxiliary Number 】The operation of corresponding auxiliary switch according to PTZ agreement；

【Page Switch】click Page Switch button to enter the PTZ Main Menu page, the menu itself can be control by the menu control buttons

16 / 111

.

.

Picture 19 552w313h

PTZ menu

3.Advanced

click on the[Advanced] button to enter a new operation page as shown below

Picture 20 578w332h

Advanced function

【Resume】resume the PTZ to restore default.

【Focus】Click ”-” / “+” button to adjust the focus of the camera (require the camera support auto

focus).

【Iris】Click ”-” / “+” button to adjust the iris of the camera(require the camera support aperture). 【Tour】Add a plurality of preset points to set a cruise line and call the cruise line,then the pan will run on the cruise line.

17 / 111

.

.

For the first time to add a cruise route, click the “+” button to enter the cruise route:

Picture 21 623w360h

Tour

In the preset drop-down box, select the preset point that needs to be added to the cruise route, set the interval time (between 3-255 seconds), and then click the “add preset” button to complete the preset point.

Click the “start” button to call the selected preset point, click “del preset “ou can delete the preset point in the cruise line; check the drop-down menu you can view the current cruise line has been added to the preset point number.

【Pattern】：Control the pan movement, the back-end device will record the running track of the pan, and then call the trail, pan will be repeated in accordance with the recorded track. When you first add the trace, click on the “+” button to enter the track settings page:.

18 / 111

.

.

Picture 22 574w332h

Pattern

You can control pan movement by the PTZ key, zoom, focus and aperture ,then click “OK” to finish 【Autoscan】Set the two boundaries in the horizontal direction of the left and right sides and then call the scan,the pan will run between the left and right boundaries in the horizontal direction.

Click on the“left” button and then control the pan tilt using the horizontal arrow keys. when it arrive the position then click “right”button to finish the setting.Click the “Autoscan” button to call the scan,click the stop button to stop calling.

【AutoPan】Click on the “AutoPan” button, the pan will rotate (relative to the original position of the camera for horizontal rotation). Click the stop button to stop the AutoPan

【Flip】click on the “Flip”button, the pan will start to flip.

【Reset】the pan will restart,and all the data will be restored default.

1.1.6Coaxial control

The coaxial control function allows the video recorder to transmit the control signal to the front-end camera through the coaxial cable. using these control signals, the recorder can control the PTZ, menu and other functions of the front camera.

Note: it require the front-end camera also support this function

19 / 111

.

.

Picture 23 624w408h

Coaxial control

【1 channel selection】select the channel by clicking the drop-down menu；

【 2 adjust the front-end camera‟s parameter 】 adjust the parameters of the front-en camera by dragging the mouse or check the function;

【3 ok 】enter OSD menu or ok function

【4 Direction key】Control the OSD menu by four key;

1.1.7Color setting

*Color config:analog channel can config its own color,digital channel can config front-end image(only NETIP-conformed device is supported,ONVIF-conformed device is not supported)

Set the selective image parameters (current channel for single window display and cursor place for multiwindow display). You can use the desktop shortcut menu and enter the interface. The image parameters include: tonality, brightness, contrast, saturation. You can set different parameters at different time sections.

20 / 111

.

.

Picture 24 576w327h

Color Setting

1.1.8Output Adjust

*Hybrid mode is with black margin vertical & horizontal, while full digital mode without.

Adjust TV output area parameters. You can use the desktop shortcut menu or enter [main menu]>

[management tools]> [Output adjust].

Picture 25 477w408h

21 / 111

.

.

Output Adjust

Note: The black margin vertical & horizontal at output adjust of hybrid mode is only effect to

analog channel.

1.1.9Logout

Logout, shut down the system or reboot up. You can use the desktop shortcut menu or enter [main

menu].

Picture 26 467w276h

Picture 3.17Logout/Shutdown/Reboot the system

【logout】Quit the menu. Offer password next entrance.

【shut down】Quit the system. Turn off the power supply.

When press the shut down button, there is schedule hint. After three seconds, the system is shut down. Cancel midway is of no effect.

【reboot】Quit the system. Reboot up the system.

1.1.10Window switch

Preview in single window/four windows/eight windows/nine windows/sixteen windows according to your choice.

Note：different video input number have different switchable preview picture.

22 / 111

.

.

1.1.11Quick-set

Only network channel has quick-set function ,you can quickly add a remote device to the network channel.

Click on the “+” sign in the preview screen, pop up the digital channel configuration wizard page, add the remote device to the DVR/NVR network channel.

1.1.12IP parameter

This function is only available in all digital and hybrid channel modes and it is used to set the remote IPC camera parameters, the gray character indicates that the remote device does not support this function. You can adjust the various front-end parameters of the connected IPC, such as exposure mode, day / night mode, image style, day and night switching threshold, AE sensitivity, AGC, WDR, de-fog, corridor (some models support this function), slow shutter, day / night noise level, mirror, anti-flicker, flip, IR swap and so on.

Note: Only when the NVR successfully connected to the company’s IPC (using NETIP protocol) and in a single connection can support the function, if you connected to third-party IPC (usding ONVIF protocol) can‟t support this function.

Picture 27 575w340h

【Exposure mode】You can set the exposure time ,choose auto or manual from 1/50 to1/1000S,the exposure time more longer, the image more brighter.

【Day/Night mode】You can modify the camera Day/Night mode manually.：

Auto：the image can be color or B&W depending on the light;

Color：the image will always be color;

Black and White：the image will always be color;

【BLC】 can close/open this function, when you open BLC(Black Light Compensation), In the bright background environment ,it is still able to see the central scene of the main scene.

23 / 111

.

.

【 Auto Iris 】 can close/open this function，This feature requires the camera to mount a lens that supports auto iris.

【Profiles】there are three mode:AUTO、Indoor、Outdoor

【AE Reference】set the camera‟s exposureSet the camera exposure, between 0 to 100 optional, the greater the reference value of the screen ,the more bright.

【ICR Threshold】it is relate to IRCUT swap mode：

IR_CUT automatically switch： the critical point for color and black/ white switching, the Day/Night conversion threshold greater ,the higher brightness from color to black.

IR_CUT IR synchronous switch： Day/Night conversion threshold 10-20 close anti-shake function, 21-30 anti-shake time is 3S, 31-40 anti-shake time is 4S, 41-50 anti-shake time is 5S.

【AE Sensitivity】. The higher the sensitivity, the switch will be faster.

【AGC】can close/open this function，when you open this function, it can automatically adjust the camera’s sensitivity to adjust the image brightness according to the ambient light changes

【WDR】can close/open this function，when you open this function, it can adjust the “Upper limit”to see the main scene in the center of the screen clearly in the strong light background.

【Defogging】can close/open this function，when open this function, The picture permeability can be improved in fog or haze weather, the higher the lever is ,the better the defoging effect

【Corridor mode】can close/open this function，when open this function, When the corridor mode is on, the camera screen will display in corridor mode(Only some models can support this function)。

【Slow Shutter】there are four choose :none、low 、medium、high.The brightness is increased by the frame accumulation, and extend the exposure time to enhance the image sensitivity at low illumination.

【IR_CUT】can be set as automatically switch or IR synchronous switch

automatically switch：swap ICUT according to the actual environment ;

IR synchronous switch：swap ICUT according to the IR lamp status ;

【DayNTLevel】When the light is sufficient, the level to eliminate the noise in the preview screen, the higher the level the better the noise reduction effect.

【NightNTLevel】When the light is insufficient, the level to eliminate the noise in the preview screen, the higher the level the better the noise reduction effect.

【Mirror】：Enable it ,the preview screen flip 90°left and right

【Flip】： Enable it ,the preview screen flip 90°up and down

【Anti-flicker】： Remove the horizontal scroll stripes in the preview screen in the fluorescent environment.

【IR Swap】：use when the ir_cut in reverse order.

1.1.13AHD&TVI＆CVI Signal Switch

This function is supported by only part of the models with analog channel, it can control the signal mode

of each channel. You can right-click to enter the shortcut menu, Or you can double-click the icon 1  J
the bottom left corner of the channel, then you can switch the AHD&TVI＆CVI Signal

you can also directly through the left mouse button double-click the channel at the bottom of the signal
switch icon to achieve the signal AHD & TVI & CVI signal switching.

in

24 / 111

.

.

2Main menu
2.1Main menu navigation

6/98

.

.

49 / 111

.

.

50 / 111

.

.

2.2Record

Operations related to record, including: Record, Playback, Backup, Screen shot(only Hybrid mode and full analog have)

Main menu

Sub menu

Function

Record

Config

Set the recording configuration, recording type, recording time section

playback

Set recording search, recording play, video file storage

backup

Detect backup device, format device, back the selective files

Alarm

Motion

detection

Set motion detect alarm channel, sensitivity, area, linkage parameters: defending time section, alarm output, screen hint, recording, screen shot, PTZ, patrol, buzz, email ，PMS and FTP upload

Video

blind

Set camera mask alarm channel, sensitivity, linkage parameters: defending time section, alarm output, screen hint, recording, screen shot , PTZ, patrol, buzz, email ，PMS and FTP upload

Video

loss

Set video loss alarm channel, linkage parameters: defending time section, alarm output, screen hint, recording, screen shot , PTZ, patrol, buzz, email ，PMS and FTP upload

Alarm

input

Set alarm input channel, equipment type, linkage parameters: defending time section, alarm output, screen hint, recording, screen shot , PTZ, patrol, buzz, email ，PMS and FTP upload

Note：part of models not support this function

Alarm

output

Set alarm mode: configuration, manual, shut down

Note：part of models not support this function

Abnormalit

y

No HDD, HDD error, HDD capacity not enough, network cut, IP Conflict, linkage parameters, screen hint or buzz.

.

Intelligent

Set algorithm rule: Perimeter alert 、  Items care 、 Video Diagnosis

setting linkage parameters :show traces、sensitivity、minimum moving

distance、alert way、

Linkage parameter：period、alarm output、the screen prompt、record、

PTZ、tour、buzzer、EMAIL、FTP upload.

Note: part of models not support this function

System

Configuration

General

Set system time, data format, language, hard disk full time operation, machine number, video format, output mode, summertime, stay time

Encode

Set main (extra) coding parameter: code mode, resolving ability, frame rate, code stream control, image quality type, code stream value, frame between value, video/audio enable,

Note ： only Hybrid mode and full analog mode have encode configuration.

Network

Set basic network parameters, DHCP and DNS parameters, network high speed download

NetServic e

PPPOE、NTP、Email、IP purview、DDNS parameter、PMS

Display

Set channel title, preview hint icon state, transparency, cover area, time title, channel title fold.

Note ：  only analog channel can set channel name,region

cover ,time title,channel title fold.

PTZ

configurati on

Set channel, PTZ protocol, address, baud rate, date bit, stop bit, check Note：Hybrid mode shows PTZ configuration,T series have no this function.

RS485

Device

Set serial port function, baud rate, date bit, stop bit, check

Note：Full digital mode shows : RS485 Device

RS232

Set serial port function, baud rate, date bit, stop bit, check

Note：part of models not support this function

Tour

Set patrol mode and interval time

.

Digital

Set channel mode, check channel status and configure the digital channel, etc.

Note：part of series support this

IPC

Param

Set the front-end IPC parameters such as exposure mode, day / night mode, profile,

Note: The front end of the ONVIF connection is not supported

Management

tools

Storage

Set appointed hard disk as read-write disc, read-only disc or redundant disc, clear data, resume date and so on

Account

Modify user, team or password. Add user or team. Delete user or team.

Online user

Break the connection with the already login user. Lock the account after break until booting up again.

Output adjust

Adjust upside, downside, nearside, starboard distance, black margin

vertical & horizontal

Note：only analog channel have black margin vertical & horizontal

Automatic maintenan ce

Set automatic reboot system and automatic deleting files.

Restore

Resume setup state: common setup, code setup, recording setup, alarm setup, network setup, network service, preview playback, serial port setup, user management

Upgrade

upgrade with external device(like USB)

Device

Info

device hardware configuration and message

Import/Ex port

Export the device’s log or configuration to external device(like USB flash disk);Input the configuration with external device(like USB flash disk).

System information

HDD info

Display hard disk capability and recording time

BPS

Display code stream information

.

Log  Clear all log information according to the log video and time

Version  Display edition information

Logout

Logout, shut down or reboot
2.2.1Record Configuration

Set the recording parameters in the surveillance channel. The system is set 24 hours consecutive recording in the first startup. You can enter [system]> [record]> [record conf.] to set.

Note:There is at least one read-write hard disk.

Picture 28 577w349h

Record Configuration

【Channel】Choose the corresponding channel number to set the channel. Choose the all option to set the entire channels.

【Redundancy】Choose the redundancy function option to implement the file double backup function. Double backup is writing the video files in two hard disks. When you do the double backup, make sure that there are two hard disks installed. One is read-write disk and the other is redundant disk.

51 / 111

.

.

【Length】Set the time length of each video file. 60minutes is default value.

【Pre-Record】Record 1-30 seconds before the action. (time length is decided by the code stream)

【Record mode】Set video state: schedule, manual or stop.

Schedule:Record according to the set video type (common, detection and alarm)and time section.

Manual:Click the button and the according channel is recording no matter the channel in any state.

Stop:Click the stop button and the according channel stops recording no matter the channel in any state.

【Period】Set the time section of common recording, The recording will start only in the set range. 【Record type】Set recording type: regular, detection or alarm.

Regular:Perform the regular recording in the set time section. The video file type is “R”.

Detection:Trigger the “motion detect”, “camera mask” or “video loss” signal. When above alarm is set as opening recording, the “detection recording” state is on. The video file type is “M”.

Alarm:Trigger the external alarm signal in the set time section. When above alarm is set as opening recording, the “detection recording” state is on. The video file type is “A”.

2.2.2Playback

Refer to chapter 1.6.3.

3.2.3 Backup

You can backup the video files to external storage through setup.

Note：The storage must be installed before the file backup. If the backup is terminated, the already backup can playback individually.

52 / 111

.

.

Picture 29 577w349h

Backup

【Detect】Detect the storage connected with the DVR such as hard disk or universal disk.

【Backup】Click backup button and the dialog box is popped up. You can choose the backup file according to the type, channel and time.

【Burning】the file will be burned synchronously after click it.

【Erase】Choose the file to delete and click erasure to delete the file.

【Stop】Stop the backup.

2.3 Alarm Function

Alarm functions include: motion detect,video blind, video loss, alarm input and alarm output, abnormality、intelligent analysis.

1.1.1Motion Detect

When system detects the motion signal that reaches the set sensitivity, the motion detect alarm is on and the linkage function is turned on.

Note: “Advanced” button is the same as right click.

*Motion detect function is different between Hybrid mode & Full digital mode:

Digital channel: not only to enable motion detect function at local side, but also to enable the remote device that was connected. when remote device detect motion movement, local side will start alarm recording, otherwise this function is not enable.

53 / 111

.

.

Hybrid mode: only need to enable motion detect function at local side.

Picture 30 577w349h

Motion Detection

【Channel】Choose the set motion detect channel.

【Enable】■ means that the motion detect function is on.

【Sensitivity】Choose in the six options according to the

sensitivity,Lowest,Lower,Middle,High,Higher and Highest.

Note: Only the motion detect under hybrid mode/ full analog mode have this function of setting sensitivity, and also only the analog channel can set region.

【Region】Click [set] to enter the set area. The area is divided into PAL22X18. Red block means the motion detect defensive area. White block means the unfenced area. You can set the area as followed, Drag the mouse and draw the area. Default: all selected blocks are detection area.

Note: Only the motion detect under hybrid mode/full analog mode have this function of setting region, and also only the analog channel can set region.

54 / 111

.

.

Picture 31 273w166h

Region

【Period】Trigger the motion detect signal in the set time section. You can set according to week or

set uniformly. Each day is divided into four time sections.■ means the set valid.

Picture 32 577w348h

set the time section

【Interval】Only one alarm signal is turned on even there are several motion detect signals in the set interval.

【 Alarm output 】 Start the external equipment of corresponding linkage alarm when the motion detect alarm is turned on.

【OutDelay】Delay a few moments and stop when the alarm state is turned off. The range is 10~300 seconds.

【Record channel】Choose the recording channel (multiple option supportive). Trigger the video signal when the alarm is turned on.

Note:Set in the [recording setup] and perform the linkage recording. Start detecting video files

55 / 111

.

.

in the corresponding time section.

【Tour】■ means that the selective channel is single window alternate patrol preview. The interval is set in the [Main Menu]>[System] > [Tour].

【PTZ Activation】Set the PTZ activation when the alarm is turned on.

*Hybrid mode, PTZ link to the related PTZ information of analog channel, While digital channel model, the PTZ is link to the related PTZ information on the remote device connected.

Note：to link PTZ, need go [Shortcut menu]->[PTZ control] to set preset point, cruise between points & interval time, etc.

Picture 33 593w157h

PTZ Activation under hybrid mode

【PostRec】When alarm is over,recording will last some seconds(10~300sec),then stop.

【Show message】Pop the alarm information dialog box in the local host computer screen.

【Send EMAIL】■ means sending an email to user when the alarm is turned on.

Note:Set in the [NetService] and send email.

【FTP upload】 to tick it, the video & picture of related record channel & snapshot channel will be uploaded to assigned position.

Note：FTP upload need be set at [Netservice]

【Buzzer】When alarm happens, device will come out with buzzer.

【Write Log】 when an alarm occurs, the device write a log which you can check on the [Info]>[Log].

【Mobile reported】when alarm happens, the alarm information will be push to your mobile client.

Note: Before use this function, you need to enable the PMS or mobile report in [main menu] > [system] > [NetService]. And you should install our APP and add the DVR to the APP.

1.1.2Video Blind

When the video image is influenced by the environment such as bad brightness or reaching the set sensitivity parameter, the camera mask function is turned on and the linkage function is turned on.

56 / 111

.

.

*Same as motion detect function, video blind is different between Hybrid mode & Full digital mode:

Digital channel: not only to enable video blind function at local side, but also to enable the remote device that was connected. When remote device with video blind, local side will start alarm recording, otherwise this function is not enable.

Hybrid mode: only need to enable video loss function at local side.

Note: “Advanced” button is the same as right click.

Picture 34 621w375h

Video blind

Set method: refer to chapter 4.3.1. Motion detect

1.1.3Video Loss

When the equipment can not obtain the channel video signal, the video loss alarm is turned on and

the linkage function is turned on.

*Same as motion detect function, video loss is different between Hybrid mode & Full digital mode: Digital channel: not only to enable video loss function at local side, but also to enable the remote device that was connected. when remote device with video loss, local side will start alarm recording, otherwise this function is not enable.

Hybrid mode: only need to enable video loss function at local side.

Note: “Advanced” button is the same as right click.

57 / 111

.

.

Picture 35 621w375h

Video loss

Set method: refer to chapter 4.3.1. Motion detect

1.1.4Alarm input

When the equipment obtains the external alarm signal, the alarm function is turned on.

*Alarm input is the same between hybrid mode & full digital mode, function enable, when it was set normal, only need to connect alarm sensor at alarm input port on local side, the alarm information is occurring, and will link to related setting functions at the same time

Note: “Advanced” button is the same as right click.

58 / 111

.

.

Picture 36 620w375h

Alarm input

Set method: refer to chapter 4.3.1. Motion detect

1.1.5Alarm output

Refer to chapter 2.6.4.

1.1.6Abnormal

Analysing and inspecting current software and hardware of the device: When some abnormal events happen, the device will make a relative answer such as show message and buzzer.

59 / 111

.

.

Picture 37 646w390h

Abnormal

【 Event Type 】 selecting abnormity you want to inspect. There are No Storage, Storage Error, Storage No Space, Net Disconnection and IP Conflict.

【Enable】Select it to make sure abnormal function workable

【Show message】Automatically alarm cue dialog box come out of the main screen 【Buzzer】Device will have one long nosie “di” while alarm is happening

【Mobile reported】When alarm happens, it will send an email to user.

【Send Email】When alarm happens, the alarm information will be push to your mobile client.

1.1.7Intelligent analysis
>Note: only part of product support this function at present。

To analyze the video image, when system detect object that meet pre-set algorithm rules and fit set flexibility and minimum image distance, will trigger video analysis alarm, and enable the linkage function.

*only the 1st channel of full analog mode and hybrid mode can support this function, and if this function is enabled, then video blind is invalid.

60 / 111

.

.

Picture 38 604w364h

Intelligent analysis setting page

【Channel】only shows by “1”，at present, only the 1st channel with maximum resolution of 1080P in  the

full analog(DVR) mode and hybrid(HVR) mode

【Enable】 tick it to enable the video analysis function, then can go for further setting,

【Algorithm】at drop-down box, Perimeter alert, Items care and Video Diagnosis to choose the algorithm rule of detection,

【Rule】 choose different algorithm rules, the related setting page is different.

Perimeter alert:

>Show traces: tick it to enable,  when alarm  triggers,  there will be red box around moving objects.;
>Sensitivity , base on different  requirement, there are 3 options in the drop-down box,Higher,Middle

and Lower；

>Minimum image distance range between  0~30 %,  the more flexible the less image distance.;
>Alert way there are 2 kinds:  cordon and  warning  area. Cordon: Can set 3 prohibited directions:

bidirectional prohibited, from top to bottom (from left to right), from bottom to top (from right to left), when the setting cordon is too slope, show with from left to right / from right to left, otherwise will be from top to bottom / from bottom to top, when the moving object meet preset cordon rules, the alarm will be triggered; Warning area: can set 3 kinds of prohibited directions: bidirectional prohibited, enter and leave, when the moving object meet preset warning area rules, alarm will be triggered.

61 / 111

.

.

>Rule click set, enter rule setting page, right click mouse, choose add, use mouse to fix two or more point, and then connect them to form a line or a irregular region, after that a box of prohibited direction options will come out, choose one of them, right click mouse, click Yes, return to previous

page, click Yes, alarm rules setting is finished.

Picture 39 620w374h

Rule setting – Perimeter alert

Items care:

>Show traces tick it to enable, when this function is triggered, there will be read box shows around the moving object
>Sensitivity: base on different requirement, there are 3 options in the drop-down box Higher,Middle and Lower.
>Minimum image distance: range between 0~30 %, the more flexible the less image distance.
>Alert way: three modes: Items stranded^ Items stolen^ Illegal parking.Items stranded:object appears within warning area, and the size of object meet the rules of minimum image distance, alarm will be triggered. Items stolen:object disappears within warning area, and the size of object meet the rules of minimum image distance, alarm will be triggered；Illegal parking:this way is similar with Items stranded.
>Rule: click set,enter the setting page of rule, right click mouse, choose add, use mouse to fix several

62 / 111

.

points and then connect them to form a irregular region, right click mouse, click Yes, return to previous page, click Yes, alarm rule setting if finished.

Picture 40 559w339h

Rule setting – items care

Video diagnosis:

>Sensitivity , base on different requirement, there are 3 options in the drop-down box Higher,Middle and Lower;
>Detection type: there are 8 kinds of detection type: Brightness anomaly detection. Sharpness detection、Noise detection、Color cast detection、Screen freezes detection、Scene change detection、 Anthropogenic interference and PTZ runway detection. You can choose one or more types if necessary, when video detect selected type, the alarm will be triggered. Now, only support “Scene change detection”.

Picture 41 625w144h

Rule setting – video diagnosis

The setting way of set / withdraw garrison time period and linkage parameter, please refer to chapter“4.3.1 motion detection”

63 / 111

.

For example：enable video analysis function, algorithm rules is Perimeter alert, the alert way in the rule is Cordon, prohibited direction is bidirectional, when a moving object across this warning line, alarm

is triggered, see below picture

Picture 42 504w244h

The alarm image regarding one of the video analysis

2.4 System setup

Set the system parameters such as General, Encode(under Hybrid/full analog mode)、Network, Net service、GUI display、PTZ configure/RS485 device、RS232、Tour setup、Digital and IPC param. .

1.1.1General

Picture 43 542w328h

64 / 111

.

.

General setup

【System time】Set the system data and time.

【Date format】Choose the data format: YMD, MDY, DMY.

【Date Separator】Choose list separator of the data format.

【Time Format】Choose time format: 24-hour or 12-hour.

【 Language 】 support 29 language at

present:Arabic,Czech,English,Finnish,Greek,Indonesian,Italian,,Japanese,Portuguese,Russian,Thai,T- Chinese,S-Chinese,Turkish,Brazilian,Bulgarian,Farsi,French,German,Hebrew,Hungarian,Polish,Roman ian,Spanish,Swedish,Vietnamese

【HDD full】 Choose stop record: Stop recording when the hard disk is full.

Choose overwrite: Cover the earliest recording files and continue recording when the hard disk is full.

【 DVR No. 】 Only when the address button in the remote controller and the corresponding DVR number is matched, the remote operation is valid.

【Video Standard】PAL or NTSC.

【Auto Logout】Set the latency time in 0-60. 0 means no latency time.

【Machine Name】Can setting the device’s name.

【DST】 Choose the summer time option and pop the dialog box as followed.

Picture 44 436w177h

DST (week)

Picture 45 430w175h

65 / 111

.

.

DST (date)

1.1.2Encode setup
1.1.3de settings is for analog channel only.

Set the video/audio code parameter: video file, remote monitoring and so on. Set every main stream parameter in the left part, and set the extra stream parameter in the right part.

Note: extra stream introduces video compression technique which was applying for multi-channel playback simultaneously, Dial-up multi-channel real-time monitor under poor bandwidth, or mobile monitor

and so on.

Picture 46 582w352h

Encode setup

Independent channel code setting

【Channel】Choose the channel number.

【Compression】Standard H.264 main profile.

【Resolution】Resolution type:1080P/720P/960H/D1/ HD1/CIF / QCIF.

【Frame Rate】P:1 frame/s~25 frame/s; N: 1 frame/s~30 frame/s

【Bit Rate Type】You can choose limited code stream or variable code stream. When you choose the variable code stream there are six image quality options. Under the limited code stream，you can choose the code stream manually；

【Bit Rate】Set the code stream value to modify the image quality. The larger code stream value the

66 / 111

.

.

better image quality.

1080P(1024~8192kbsp) 720P(1024~4096kbps) 960H(869~4096kbps) D1 ( 512~2560kbps ) HD1 (384~2048kbps) CIF(64~1024kbps), QCIF(64~512kbps)

【Frame Interval】can choose the range 2~12s

【 Video/Audio 】 When the icons are all in reverse displayed, the video file is video and audio

multiplex stream.

Extra stream Settings

【Extra stream】is used for client side monitoring & mobile monitoring.

【Channel title】select channel title and then to choose whether need enable video & audio. The

resolution, frame rate, bit rate type settings is the same as main stream.

【Coding mode】There are three codind mode: High Profile，Main Profile amd Baseline which you can choose when you click the drop-down menu.High Profile is the best, Baseline is the worst.

2.4.3 Network setup

Picture 47 603w364h

Network

【Net Card】 You can choose cable network card or wireless network card.

【DHCP Enable】 Obtain IP address automatically(not suggested)

Note：DHCP server is preinstalled.

67 / 111

.

.

【IP address】Set the IP address. Default: 192.168.1.10.

【Subnet mask】Set the subnet mask code. Default: 255.255.255.0.

【Gateway】Set the default gateway. Default: 192.168.1.1.

【DNS setup】Domain Name Server. It translates the domain name into IP address. The IP address is offered by network provider. The address must be set and reboot then it works.

【Media port】Default: 34567.

【HTTP port】Default: 80.

【HS Download】It can improve the speed of downloading video files if enable HS download.

【Transfer Policy】There are three strategies: self-adaption, image quality precedence and fluency precedence. The code stream will adjust according to the setup. Self-adaption is the tradeoff between the image quality precedence and fluency precedence. Fluency precedence and self-adaption are valid only when the assistant code stream is turned on. Otherwise image quality precedence is valid.

2.4.4 NetService

Choose the network service option and click the set button to configure the advanced network functions

or double click the service button to configure the parameters.

Picture 48 555w412h

NetService

68 / 111

.

.

【PPPoE setup】

Picture 49 442w180h

PPPOE

Enable：Reverse■ means choose,setting can become effective.

Input the user name and password that ISP(Internet service provider)provides. After saving it reboot up your system. Then the DVR will build a network connection based on PPPoE. The IP address will change into dynamic IP address after above operation is well done.

Operation：After PPPoE dialing successfully look up the IP address in the [IP address] and obtain the current IP address. Then use this IP address to visit the DVR through user port.

【NTP setup】

Picture 50 428w232h

NTP

The NTP server must be installed in the PC.

Enable：Reverse■mean choose，setting can become effective.

Custom：It can adjust the time of device according to the server you connected.

Sever IP: Input the IP address installed NTP server.

Port: Default: 123. You can set the port according to NTP server.

Update Period: The same with the NTP server check interval. Default: 60minutes.

69 / 111

.

.

【EMAIL setup】

If the alarm is turned on or the alarm linkage photos are taken, send an email about the alarm

information and the photos to appointed address.

Picture 51 545w363h

EMAIL

SMTP server: Email server address. It could be an IP address or domain name. Domain name can be translated only it is the correct DNS configuration.

Port: Email server port number.

SSL: Decide whether using Secure Socket Layer protocol to login.

User Name: Apply the email server user name.

Password: Input the password corresponding to the user.

Sender: Set the email sender address.

Receiver: Send the email to appointed receivers when the alarm is turned on. You can set three receivers at most.

Title: You can set as you wish.

【IP Filter setup】

When choosing the white list, only the listed IP address can connect the DVR. The 64 IP addressed are supportive in the list.

70 / 111

.

.

When choosing the black list, the listed IP address can not connect the DVR. The 64 IP addressed

are supportive in the list.

You can delete the set IP address by √ in the options.

Note：When the same IP address is in the white and black list at the same time, the black list precedence

is higher.

Picture 52 469w312h

IP FILTER

【DDNS】

Picture 53 472w267h

DDNS setup

It is the abbreviation of dynamic domain name server.

Local domain name：Provide the domain name registered by DDNS.

User name：Provide the account registered by DDNS. Password： Provide the password registered by DDNS.

71 / 111

.

.

When the DDNS is successfully configured and start, you can connect the domain name in the IE

address column to visit.

Note：The DNS setup must be configured correctly in the network setup.

【FTP setup】

FTP is available only when alarm happens,or alarm activates record and snapshot,it will upload related

record and snapshot pictures to FTP server.

Picture 54 495w303h

FTP setup

【Enable】Click Enable, then all settings will be available

【Server IP】IP address for FTP server

【Port】Domain Port of FTP, default 21

【User Name】User name of FTP

【Password】Password of user

【Anonymous】：Enable anonymous, no need setting user name and password 【Max File Length】Max length for upload files at every packed, default 128M 【Dir Name】：The directory of upload file.

Note: The user should be with authority to upload files.

【ARSP】

Startup DDNS server to add devices and manage it in the DDNS server

72 / 111

.

.

Picture 55 454w252h

ARSP

【Type】choose “DNS”

[Enable]  ■ means it is chosen

【Sever IP]】IP address of DDNS server

【Port】 Port No. of device, related DDNS server listen port

【User name】 the user name that device can log in DDNS server

【Password】 the password related to the user name.

Note: Please set up server before using DDNS.

【Alarm center】

When alarm occurring, report alarm information to alarm server.

Picture 56 422w235h

Alarm server setting

【Protocol type】GENERAL

【Enable】To tick it means enable.

73 / 111

.

.

【Server Name】IP address of Alarm Server

【Port】Device Port No.

【Alarm Report】Tick it means to report alarm information to server.

【Log Report】Tick it, means to report log to server.

【Wireless Config】

ADSL through 3G or 4G net card, use CMS to visit and config the device

Picture 57 440w282h

Wireless Config

【Enable】Choose Enable to make all settings available

【Type】Dial type,default AUTO

【Wireless AP】3G access point

【Dial Number】3G Dial Number

【User Name】User name of 3G

【Password】Password of dial user

【IP Address】IP address, got from dial

【UPNP】

UPNP protocol is to realize auto port forwarding on router, precondition of using this function is to make sure the UPNP function of router is enabled.

74 / 111

.

.

Picture 58 403w238h

UPNP

【Enable】Choose Enable to make sure all UPNP settings available

【HTTP】 Route will automatically distribute HTTP port for the device,when IE viewing,it need this port

【TCP】 Router will automatically distribute TCP port for the device,when monitoring via CMS,it need this port.

【Mobile Port】Router will automatically distribute Mobile Port for the device,when mobile monitor,it need this port.

【WIFI】

DVR connect to wireless router via WIFI module, then to visit it through IP address, the precondition of using this function is to make sure the DVR have connected with WIFI modern.

75 / 111

.

.

Picture 59 435w369h

WIFI configure

【Search】：click【search】to search all the available wireless device in current range.

【enable】：tick it to enable firstly, then go for further setting.

【auto obtain IP address】：tick it to enable, device will auto obtain a WIFI IP.

【SSID】：wireless LAN name, auto match to the wireless device u connected.

【Password】：wireless network password of router；

【IP address】: to set the IP address of device, default is 192.168.1.12

【subnet mask】:set subnet mask of device, default is 255.255.255.0

【gateway】：set gateway of device, default is 192.168.1.1

【RTSP】

To do surveillance via cross-browser (Safari, Firefox, Google chrome ) and VLC software. This function only for monitor but can not control the device.

Picture 60 401w147h

RTSP setting

76 / 111

.

.

[Enable]: ■ means enable, tick it firstly before setting.

【Port】：the default port is 554

【CLOUD】

Check the cloud services, male cloud service is enabled, the user can visit http://www.xmeye.net

Picture 61 403w149h

Cloud setting

【Enable】 Select it to make sure abnormal function workable

【PMS/Mobile reported】

Enable this function, at the same time open the function in the mobile end, exit the application, when

the alarm occurs, check the cell phone to report, will send information to cell phones.

Picture 62 416w178h

PMS

Picture 63 417w179h

Mobile reported

【Enable】 Select it to make sure abnormal function workable

【Server Name】 default：push.umeye.cn

77 / 111

.

.

【Port】 the default port is 80

2.4.5 GUI Display

Configure the video output parameters including the front output mode and encode output mode.

Front output：In the local preview mode include: channel title, time display, channel display, record status, alarm status, transparency and region cover.

Encode output：In the network surveillance and video file mode include: channel title, time display, channel display, record status, alarm status, transparency and region cover.

*Remark:Only 6000 series product support preview resolution – 1920*1280(1080P)

Picture 64 500w302h

Display

【Channel Title】Click the channel name modify button and enter the channel name menu. Modify the channel name. The 16 Chinese characters and 25 letters are supportive.

【 Time Display 】 means the selective state. Display the system data and time in the surveillance window.

【Channel display 】means the selective state. Display the system channel number in the surveillance window.

【Record Status】means the selective state. Display the system recording status in the surveillance window.

【 Alarm Status 】 means the selective state. Display the system alarm status in the surveillance

window.

78 / 111

.

.

【Transparency】Choose the background image transparency. The range is 128~255.

【Resolution】set display resolution.

【Channel】Choose the set code output channel number.

【Region Cover】means the selective state. Click the cover area button and enter the corresponding channel window. You can cover the arbitrary using mouse. (Black region is for output)

【Time display】and 【Channel display】 set the display position of channel title and time title.

*the channel no., region cover, time title and channel title setting function exist at output

mode only when the device is under hybrid(HVR) mode or full analog(DVR) mode.

2.4.6 PTZ device /RS485 device

* When under hybrid mode/full digital mode, it shows with PTZ device and RS485 device;*When under full digital mode, it will show RS485 device only.

Picture 65 511w380h

PTZ config

【Channel】Choose the dome camera input channel.

【Protocol】Choose the corresponding dome protocol. (PELCOD as an example)

【 Address 】 Set as the corresponding dome address. Default: 1.(Note：The address must be

consistent with the dome address.)

79 / 111

.

.

【 Baudrate 】 Choose the corresponding dome baud rate length. You can control the PTZ and vidicion. Default: 115200.

【Data bits】Include 5-8 options. Default: 8.

【Stop bits】Include 2 options. Default: 1.

【Parity】Include odd check, even check, sign check, blank check. Default: void.

Note: The protocol, address and baudrate of the DVR must be same with the PTZ, or you can not control the PTZ.

2.4.7 RS232

*T series do NOT support this function.

Picture 66 516w312h

RS232

【Serial Port Function】Common serial port is used to debug and update program or set up specific serial port.

【Baud rate】Choose the corresponding baud rate length.

【Data bits】Include 5-8 options.

【Stop bits】Include 2 options.

【Parity】Include odd, even, mark, space, default is none.

80 / 111

.

.

1.1.8Tour

Set the patrol display. ■ means that the tour mode is enable. You can choose the single-view,

four-view, six-view of single mode tour or hybrid mode tour.

Picture 67 525w317h

Tour configure

【interval】Set the patrol switch interval. The set range is 5-120 seconds.

【alarm tour】set the interval to shift alarm tour, range is 5-120 seconds, choose return when alarm

ends, when alarm link to tour, system will auto shift to six-view after alarm finished.

Remark：at preview mode, click upper right icon© / ®can turn on / off tour(

mean turn on,

.

mean turn off).

1.1.9Channel manage

Digital manage including digital channel, channel status, and channel mode (Remark: there is only analog mode if device is under full analog mode):

81 / 111

.

.

Picture 68 428w318h

Channel manage page under all analog(DVR) mode

Picture 69 440w266h

Channel manage page under Hybrid(HVR) mode / full digital(NVR) mode

Digital channel:

82 / 111

.

.

Picture 70 534w323h

Single link page of digital channel

Picture 71 559w339h

Multi-linkage page of Digital channel

【Channel】select channel title

【Enable】Open digital channel, tick enable, then can do related settings

【Time Synchronization】Tick it means the time of this channel and device is the same.

【Connection Mode】can be singe connect or multi-ink, multi-link modes can connect to several devices, device will be tour displayed one by one, tour interval can be set, no less then 10s;

【Delete】If the user want to change device, select the existing device, click delete will be ok.

83 / 111

.

.

【Add】 click add will come out below page to add new device

Picture 72 456w276h

remote channel configure page

【Configure Name】device is with default configure title, user can revise it if necessary；

【Device Type】3 types: IPC、DVR、HVR，user can choose as what you like, default is IPC； 【Protocol】Default is TCP

【 Remote channel 】 User can input remote channel title from the device that you want to connect remotely

【Stream】Default is main stream, do not support extra-stream at present；

【Device address】IP address of device.

【Port】Default is 34567

【User name】Default is admin

Remark: click 【search】will show all the devices that searched out, user can choose any of the device that you like.

84 / 111

.

.

Picture 73 500w302h

the device list searched under remote channel setting

Channel Status:

Channel status is to show the status of all the digital channel When there is what existing, status including Max Resolution, This Resolution, Connection Status.

For example: The channel status for 2+2 mode is as below:

Picture 74 534w323h

D03 channel is connected, and D04 channel doesn‟t add the remote device.

Remark: when the current resolution is over the max resolution that the channel supported, then a red “X” will be shown on the preview image, for example: Under full digital channel mode, Max resolution of channel 3 is D1, if it was connected to a device with resolution over D1 ( such as

85 / 111

.

.

960H), you will see below pic:

Picture 75 281w159h

Channel type:

Picture 76 560w339h

Remark: this series of product with full analog channel mode, hybrid mode and full digital mode, and different model with different channel mode, user can shift the mode freely if necessary.

1.1.10IPC param.

Refer to chapter 3.6.12. IPC param.

2.5 Advanced

Manage tools menu including: HDD manage, account manage, online user, output adjust, auto maintain, upgrade.

86 / 111

.

.

Picture 77 399w296h

Advanced

1.5.1 HDD Manage

Configure and manage the hard disk. The menu displays current hard disk information: hard disk number, input port, type, status and overall capability. The operation include: setup the write-read disk, read-only disk, redundant disk, hard disk format, resume default. Choose the hard disk and click the right function button to execute.

Note：Read/Write Disk: The equipment can write or read data.

Read-only Disk: The equipment can read data but can not write data.

Redundant Disk: Double backup the video files in the write-read disk.

Picture 78 456w276h

HDD manage

87 / 111

.

.

2.5.2 Account

Manage the user purview.

Note：1. The character length is 8 bytes at most for the following user and user team name. The blank ahead or behind the character string is invalid.The middle blank in the character string is valid. Legal characters include: letter, number, underline, subtraction sign, dot.

3. There is no limit in the user and user group. You can add or delete the user group according to user definition. The factory setup include: user\admin. You can set the team as you wish. The user can appoint the purview in the group.
4. The user management include: group/ user. The group and user name can not be the same. Each

user only belongs to one group.

Picture 79 533w322h

Account management

【Modify User】Modify the existed user attribute.

【Modify Group】Modify the existed team attribute.

【Modify Password】Modify the user password. You can set 1-6 bit password. The blank ahead or behind the char string is invalid. The middle blank in the char string is valid.

Note：The user who possess the user control purview can modify his/her own or other users password

88 / 111

.

.

Picture 80 385w208h

Modify password

【Add user】Add a user in the group and set the user purview. Enter the menu interface and input

the user name and password. Choose the team and choose whether cover using the user. Cover using

means that the account can be used by multiple users at the same time.

Once choose the team the user purview is the subclass of the team.

We recommend that the common user‟s purview is lower than the advanced user.

Picture 81 508w307h

Add User

【Add Group】Add a user group and set the purview. There are 33 different purviews: shut down the equipment, real time surveillance, playback, record setting, video backup and so on.

89 / 111

.

.

Picture 82 481w291h

Add group

【Delete User】Delete the current user. Choose the user and click delete user button.

【Delete Group】Delete the current group. Choose the group and click delete group button.

Picture 83 454w273h

Delete Group

1.1.1ety question

Set one or two different safety questions as below picture shows, and then fill in the answer and confirm answer, then click OK and cancal to exit. After that you can reset the password when you forget it through the safety question.

90 / 111

.

.

Picture 84 317w234h

Safety question

1.1.3Online user

To check the information of network user that connected with local device, also can tick the selected user to break up connection,(make √ at the box)，then the user will be frozen after connection stopped,

and will not log in until device reboot.

Picture 85 475w287h

Online user

1.1.4Output adjust

Refer to chapter 2.6.8 .

1.1.5Auto Maintain

The user can set the time to auto reboot and auto delete file.

91 / 111

.

.

2.5.6 Restore

Picture 86 454w180h

Auto maintain

The system restore to the default. You can choose the items according to the menu.

Picture 87 526w317h

Restore

92 / 111

.

.

1.1.7Upgrade

Picture 88 595w359h

Upgrade

Upgrade from USB: Plug the U disk, upgrade the device use the upgrade file in U disk.

【Upgrade Pasition】choose USB interface.

【Upgrade file】choose the upgrade file.

Online Upgrade: When you connect your DVR to WAN, it will make comparison of the firmware version of the DVR and the firmware version of the server. It will upgrade if find the latest firmware.

Camera Upgrade: Plug the U disk, upgrade the AHD camera (some model support)/ IPC (when in IP mode or HVR mode) use the upgrade file in U sidk.

Note: Please don‟t cut off the power when upgrade, it will cause serious consequences; and please check the upgrade firmware if it is for the DVR model when upgrade failed.

1.1.8Device Info

Provide device interface info like audio in,alarm in/out to be conveniently used for user.

93 / 111

.

.

Picture 89 474w290h

Device info

1.1.9Import / Export

Users can export the log info and the configure file from device to connected flash stick, and also can import related configure file from flash stick to settings, which greatly bring convenience to the customers.

Picture 90 482w292h

Import / Export interface

2.6 Info

Display the hard disk information, including HDD info, code stream statistic, log info, version info

94 / 111

.

.

2.6.1HDD info

Display the hard disk state: hard disk type, overall capability, residual capability, the recording time and so on.

Picture 91 477w289h

HDD info

Tips：  ○ means that the hard disk is normal. X means that the hard disk is broken-down.- means that

there is no hard disk. If the user need to change the damaged hard disk, you must shut down the DVR and take up all the damaged hard disks,then install a new one.

* behind serial number means the current working disk such as 1*. If the corresponding disk is damaged, the information will show “？”.

1.1.2BPS

Display the code stream（Kb/S）and hard disk capability （MB/H）in real time. It displays as the wave sketch map.

95 / 111

.

.

Picture 92 483w292h

BPS

1.1.3LOG

To search log information base on the set search mode.

Log information include: system operation, configuration operation, data management, alarm affair, recording operation, user management, file management and so on. Set the time section to look up and

click the look up button. The log information will display as a list. (one page is 128 items) Press Page up

or Page down button to look up and press delete button to clear all the log information.

Picture 93 526w317h

Log information

96 / 111

.

.

1.1.4Version

Display the basic information such as hardware information, software version, issue date, serial number , NAT status and so on.

Picture 94 462w344h

Version information

2.6Shut down system

Refer to chapter 2.6.2.

6/98

.

]]> https://www.xvraid.com/general/xmeye-dvr-user-manual.html/feed 0 JUAN CCTV Firmware Software NEW https://www.xvraid.com/software/juan-cctv-firmware-software-new.html https://www.xvraid.com/software/juan-cctv-firmware-software-new.html#respond Thu, 20 Jul 2023 06:59:33 +0000 https://www.xvraid.com/?p=2032 JUAN CCTV Firmware Software NEW, JUAN  independently design, research and develop all the current full CCTV product line in dozens, including wireless NVR Kit, standalone wireless IP camera，NVR, hybrid AHD, IP cameras,  etc… In addition, JUAN  has passed CE for EU, FCC for America and other authorized certification.

With 200 professional engineers of hardware and Software, Special R&D team focus on software and hardware design, to make sure the quality for JUAN  brand. With 15,000 square meters plant area, JUAN  owns 20 sets high-speed SMT,  4 DIP workshop, 20 assembling lines; Daily productivity ups to 5000pcs DVR/NVR and 5000pcs cameras.

JUAN  have built it’s own nationwide sales net, successfully expended European, American, middle East and so on. Quality is the absolute truth criterion for Juan, 100% inspection before delivery; Moreover, JUAN  has an efficient pre-sales and after-sales service team!JUAN , your most trustful cooperation partner!

JUAN CCTV Firmware Software NEW

Read Next :

PC client: CMS (support Mac) [ DownLoad ]
2020-03-20PC client: CMS ( Windows7.8.10) [ DownLoad ]
2020-03-04Backup video player [ DownLoad ]
2020-02-26P2/P4/P3 2_1_42_578012 [ DownLoad ]
2019-03-06N6216 N6236-2 N6225 2_8_7_0_24C3… [ DownLoad ]
2019-03-06N6206_2_8_7_0_21D22810 [ DownLoad ]
2019-03-06N6209_2_8_7_0_21D22810 [ DownLoad ]
2019-03-06D6208_2_8_7_0_32D22310 [ DownLoad ]
2019-03-06N6236_2_8_7_0_23752920 [ DownLoad ]
2019-0306N6216-2_2_8_7_0_23D22310 [ DownLoad ]
2019-03-022.3.2.576128 [ DownLoad ]
2019-03-022.1.52.576122 [ DownLoad ]
2019-02-26N6008_2_7_3_13_223222 [ DownLoad ]
2019-02-26D9104-2_1_8_1_315222B20 [ DownLoad ]
2019-02-26D9104C3_1_8_1_313223B20 [ DownLoad ]
2019-02-26D9104C_1_8_1_313222B20 [ DownLoad ]
2019-02-26D9104_1_8_1_311322B20 [ DownLoad ]
2019-02-26K9104P-2_1_8_1_313223B15 [ DownLoad ]
2019-02-26N9204-2_2_4_0_5_215123 [ DownLoad ]
2019-02-26N9204_2_1_26_215222 [ DownLoad ]
2019-02-26N9204_2_1_26_215222 [ DownLoad ]
2019-02-26K6208-W_2_8_7_10_22D22830 [ DownLoad ]
2019-02-26K9104-2_1_8_1_313223B15 [ DownLoad ]
2019-02-26N6009_2_7_3_10_223222 [ DownLoad ]
2019-02-26R5104_2_3_13_4_413221 [ DownLoad ]
2019-02-26R5204_2_3_13_4_41932310 [ DownLoad ]
2019-02-26R5308_2_3_13_4_42B42320 [ DownLoad ]
2019-02-26
R5208_2_3_13_4_42A32310 [ DownLoad ]
2019-02-26R5116_2_3_13_4_43A32310 [ DownLoad ]
2019-02-26N6016-2_2_7_3_13_23632320 [ DownLoad ]
2019-02-26R5132_2_3_13_4_45B42320 [ DownLoad ]
2019-02-26D9108-3_2_7_3_13_32322310 [ DownLoad ]
2019-02-26N6006_2_7_3_10_223222 [ DownLoad ]
2019-02-26N6016-3_2_8_1_6_2392231 [ DownLoad ]
2019-02-26N6036_2_7_3_13_25642320 [ DownLoad ]
2019-02-26N6025_2_7_3_13_24632320 [ DownLoad ]
2019-02-26NVR_N9816_2_8_0_4_23742920 [ DownLoad ]
2019-02-26N6025_2_7_3_13_24632320 [ DownLoad ]
2019-02-26K6204-W_2_8_7_10_21D22830 [ DownLoad ]
2019-02-26R5216_2_3_13_4_43B42320 [ DownLoad ]
2019-02-26DNVR upgrade tool [ DownLoad ]
2019-02-26PJ2420-DL-W [ DownLoad ]
2019-02-26P6_N16D_2_1_13_564222 [ DownLoad ]
2019-02-26P2_V2.8.27_CW(AK3918E V200) [ DownLoad ]
2019-02-26P2_V1.5.46_CW(AK3918E V100) [ DownLoad ]
2019-02-26P1_V2.8.27_CW(AK3918E V200) [ DownLoad ]
2019-02-26P1_V1.4.70_CW(AK3918E V100) [ DownLoad ]
2019-02-26N9804_2_5_4_31_21834910 [ DownLoad ]
2019-02-26IPC tester [ DownLoad ]
2019-02-26IPCAMERA_N18EV2W_2_3_1_578010 [ DownLoad ]
2019-02-26IPC upgrade tool [ DownLoad ]
2019-02-26PC client: CMS (support XP) [ DownLoad ]
2019-02-26IE control [ DownLoad ]
2019-02-26Hard disk hanging computer backup … [ DownLoad ]
2019-02-26IPC router manual [ DownLoad ]
IPC router [ DownLoad ]
2019-02-26Client Chinese and English manual [ DownLoad ]
2019-02-26V2.4.33 [ DownLoad ]
2019-02-26N9808_2_5_4_31_21834910 [ DownLoad ]
2019-02-26R5304_2_3_13_4_41A32310 [ DownLoad ]
2019-02-26NVR_K9804-W_2_5_4_33_21834930 [ DownLoad ]
2019-02-262.3.2.576111 [ DownLoad ]
2019-02-262.2.60.564220 [ DownLoad ]
2019-02-262.1.25.578011 [ DownLoad ]
2019-02-26PJ2420-DL-4G [ DownLoad ]
2019-02-26V2.6.15 [ DownLoad ]
2019-02-26IPC_WS18E_1_7_8_573013 [ DownLoad ]
2019-02-26V1.3.63 [ DownLoad ]
2019-02-26V2.5.0_W-pwc 修复ESSID为空 [ DownLoad ]
2019-02-26IPC_V2.6.1_W [ DownLoad ]
2019-02-26IPC_V1.3.51-W [ DownLoad ]
2019-02-26IPCAMERA_N16EPW_2_8_10_576112 [ DownLoad ]
2019-02-26IPCAMERA_N16EW_2_8_10_576110 [ DownLoad ]
2019-02-26K6304-W_2_8_7_10_21C32330 [ DownLoad ]
2019-02-26V2.5.8_IPG5320 [ DownLoad ]
JUAN CCTV Firmware Software NEW
JUAN CCTV Firmware Software NEW

FAQ

Below is a comprehensive list of questions most frequently asked.

1、Where can I get a catalog?

       You can download a copy of our current catalog here.

2、How can I get a quotation?

       You can send us an inquiry on a product or assembly you are interested in. We would appreciate the opportunity to quote your requirements!

3、How long are your quotes valid?

      30 days

4、Is there a minimum order quantity?

      Yes. In most cases, to buy directly from us you will need to make a minimum purchase.

5、 I’m not sure if I have requested the correct wire rope. Can I have a sample?

       Absolutely! Once you have a chance to use our cable, you will be convinced of our quality and reliability. Cost free if the quantity is small.

6、How to order the products?

      Send the inquiry with detail item description or with Article NO..Quantity, size, package.If possible please attach one reference picture to avoid any misunderstanding or any links from website for we get a better。 understanding.

7、How do you price your products?

      Steel wire rope is sold by weight (kilograms); Rigging hardware is sold in piece;Wire rope sings are sold in sets; welding wire is sold in weight(kilograms); construction machine is sold in set.

8、Is freight included in your price?

       No. Our pricing is FOB Factory, Freight extra.

9、Do you charge for certifications?

       No.

10、How do you price your products?

         Steel wire rope is sold by weight (kilograms); Rigging hardware is sold in piece;Wire rope sings are sold in sets; welding wire is sold in weight(kilograms); construction machine is sold in set.

11、Is freight included in your price?

         No. Our pricing is FOB Factory, Freight extra.

12、Do you charge for certifications?

         No.

13、Do you charge for certifications?

         No.

14、Do you charge for certifications?

         No.

 

1.Technical Query

1).Q:Customers forget password,can not enter DVR main menu,what should do?

A:Press “▲” button in DVR front panel for 10 times continuously,then can hear one sound “di”,after “di”,password restore factory setting,then right click mouse,enter main menu—setting—system setting–user management,click confirm or restore factory setting,password will restore default.Or customer can set new password

 

2).Q:Which format of backup file?

A:It is backup in AVI format,general can play,like real player,thunder storm,etc

 

3).Q:Esee ID disappear suddenly,why happen this?What should do?

A:Reasons might be:

a.DHCP is selected,so that IP is changing all the time

b.Network is not working

To get Esee ID,Right click mouse,enter main men—setup–system setup–network setup,click DHCP,click “OK” to save setting,in this way can get IP address automatically,then back to preview interface.Stay in preview interface for 30 seconds,then enter DHCP setting again,cancel DHCP, click “OK” to save setting.Back to preview interface to wait till ID appear again

(Note:To get Esee ID,customer need to enter network setup three times)

 

4).Q:HDD can not be formatted,why?

A:Reason might be:do not stop recording,if need to format HD,need to stop all recording,includes manual recording,timing recording,motion detection

 

5).Q:CMS is not working in computer,why?

A:a.Computer system not windows or XP,our CMS based on windows or XP,do not support other system

b.Computer general storage capacity is below 128M.To check computer storage capacity,run dxdiag–display–general storage capacity

c.Computer do not install card drive

 

6).When upgrade,notice file not found,what should do?

a.Format U disk to FAT32 form

bPut fimrware in root u diskc.Change another u disk with better compatible

 

7).Q:How to change logo?

A:Prepare two pictures of the logo, the image resolution should be 800×600，720×576. less than 64KB，the two files should be named as vga800x600.jpg,cvbs720x576.jpg. Copy to the flash disk.

Connect the flash disk to the dvr

Come to the main menu, right click the mouse, go to setup—-system tools—-system maintenance

Click “logo” and “USB storage”, then start, when it shows“vga800x600.jpg  loaded and cvbs7200x576.jpg  loaded”，and click “sure” to finish the logo changing, then click “return” to exit

Reboot dvr to see if the logo has been changed

 

8).Q:How to upgrade?

A:Firstly, plz decompress the FW and copy it to your flash disk, then connect it with the dvr

Secondly, plz come to the interface of setup—system tools–system maintenance–system upgrade, click start–ok, it will begin the upgrading

Plz notice that during the upgrading, keep the dvr power on and the lines are connected.

After the upgrading to 100%, it finished, the dvr will restart, and it comes out the latest version

 

9).Q:What percentage spare mother board we offer?

A:1%

 

 

2.Esee Query

1).Q:User can not connect Esee by Esee ID,what should do?

A.a.Use computer in same LAN with DVR,then go to www.ip138.com (It is Chinese website,or u can also go to your local website to check ur WAN IP address),it will give one IP address

b.Enter router–status—WAN IP,check this WAN IP same with IP give by ip138 or not.If different,current network environment can not set remote.Reason might be there are multi level routers.To set remote,need to keep only one level router.If same IP,then go to next step

c.Enter DVR main menu–setup–system setup–network setup,change WEB port to one number above 1024,then save

d.Enter router,disable UPNP,then enter virtual server to forwarding ports,add DVR IP address,WEB port and data port manually in virtual serve,then save

e.Reboot router,then can see view

 

2).What speed requirement about DVR and mobile?

DVR network upload speed above 2M,mobile side download speed above 2M

 

3).Mobile Esee view manual:

(Support Andriod and Iphone Esee view)

Go to www.dvrskype.com in mobile broswer directly,input device ID,user name and password

Besides,to use mobile application,for Andirod,can also download Esee in google play,for Iphone can go to APP store to download Eseye

 

 

3.Warranty Query

1).Q:How long warranty we offer?

A:12 months

2).In order to try best to avoid to de deducted or send bank by China custom,pls pay attention below two things:

a.Before u send back repair mother board,pls inform me in advance,give me CI & PL in advance,or u give me details,I can also make it for u.After my confirmation,then u send back

b.Delivery term need to be door to door term

3.Other Query

1).When customer place new order,what should confirm with customer?

A.Which language is default in osd?

B.Plug style:like Europe style plug,UK style,US style,which style u need?

C.How many voltage?220V or?

D.PAL or NTSC as default?

E.This lot by sea or by air?

F.Any shipment mark?

]]> https://www.xvraid.com/software/juan-cctv-firmware-software-new.html/feed 0 Hilook DVR User Manual https://www.xvraid.com/guide/hilook-dvr-user-manual.html https://www.xvraid.com/guide/hilook-dvr-user-manual.html#respond Thu, 29 Jun 2023 19:45:14 +0000 https://www.xvraid.com/?p=1875 Hilook DVR User Manual, For the first-time access, you need to activate the video recorder by setting an admin password. No operation is allowed before activation. You can also activate the video recorder via web browser, SADP or client software.

Chapter 1 Startup

    1. Activate Your Device

For the first-time access, you need to activate the video recorder by setting an admin password. No operation is allowed before activation. You can also activate the video recorder via web browser, SADP or client software.

Before You Start

Power on your device.

Steps

  1. Select a language.
  2. Click Apply.
  3. Input the same password in Password and Confirm Password.

Warning

Strong Password recommended-We highly recommend you create a strong password of your own choosing (Using a minimum of 8 characters, including at least three of the following categories: upper case letters, lower case letters, numbers, and special characters.) in order to increase the security of your product. And we recommend you reset your password regularly, especially in the high security system, resetting the password monthly or weekly can better protect your product.

  1. Activate network camera(s) connected to the device.
  • Check Use the Device Password to use the device password to activate the inactive network camera(s).
  • Enter a password in Camera Activation Password to activate network camera(s). 5. Click Activate.

‘User Name admin

‘Password

‘Confirm Password

‘Camera Activation Password

Pl use the Device P

Figure 1-1 Activation

What to do next

Hilook DVR User Manual

Read Next :

Follow the wizard to set basic parameters.

  • When you forget your password, there are three methods to reset it, including password resetting email, HiLookVision, and security questions. You have to configure at least one password resetting method. Refer to Set Password Resetting Email and HiLookVision for details.
  • For unlock pattern. Refer to Set Unlock Pattern for details.
  • For general system parameters. Refer to General for details.
  • For general network parameters. Refer to General for details.
  • For storage device configuration. Refer to Storage Device for details.
  • For adding network cameras. Refer to Network Camera for details.
  • For platform configuration. Refer HiLookVision to for details.

1.2 Login

      1. Set Unlock Pattern

Admin user can use the unlock pattern to login. You can configure the unlock pattern after the device is activated.

Steps

  1. Use the mouse to draw a pattern among the 9 dots on the screen. Release the mouse when the pattern is done.

QU Note

The pattern shall have 4 dots at least.

Each dot can be connected for once only.

  1. Draw the same pattern again to confirm it.

word image 1875 1

Figure 1-2 Set Unlock Pattern

When the two patterns match, the pattern is configured successfully.

      1. Log in via Unlock Pattern

Steps

  1. Right click the mouse on live view.

word image 1875 2

Figure 1-3 Draw the Unlock Pattern

2. Draw the pre-defined pattern to enter the menu operation.

dJNote

  • If you have forgotten your pattern, you click Forgot My Pattern or Switch User to log in via password.
  • If you have drawn the wrong pattern for more than 5 times, the system will switch to the normal login mode automatically.

1.2.3 Log in via Password

If your video recorder has logged out, you must login before operating the menu and other functions.

Steps

  1. Select User Name.

Welcome

word image 1875 3

Figure 1-4 Login Interface

  1. Input password.
  2. Click Login.

C@Note

  • When you forget the password of the admin, you can click Forgot Password to reset the password.
  • If you enter the wrong password 7 times, the current user account will be locked for 60 seconds.

Chapter 2 Live View

    1. GUI Introduction
  • Click Target Detection at the upper-left corner, and select a or m to display the specified live target detection results. For result details, click View More.

CU Note

o Target Detection is only available for certain models.

o Target Detection is valid when HDD is installed.

o 0 is valid for motion detection, line crossing detection, intrusion detection, and facial detection.

  • Click Fl to start/stop auto-switch. The screen will automatically switch to the next one.
  • Click to enter full screen mode.
  • Double click a camera to view it in single-screen mode. Double click again to exit single-screen mode.
  • Change a camera live view screen by dragging it from its screen to the desired screen.
  • Scroll up/down to turn to previous/next screen.
  • Position the cursor on a camera to show shortcut menu.

word image 1875 4

Figure 2-1 Shortcut Menu

Table 2-1 Shortcut Menu Description

Button Description
Start playing videos recorded in the latest five minutes.
□ Digital zoom. You can adjust zoom-in times and view the desired area.
^^3 Click it to enter PTZ control mode.
Fl Turn on/off live view audio.
a Switch video stream.

• In the live view interface, there are icons at the upper-right corner of the screen for each camera, showing the camera recording and alarm status.

Table 2-2 Live View Icon Description

Icon Description
Alarming (normal event and smart event).
Recording.

• Right click your mouse to display the shortcut menu.

fnJ Menu

Ei Single Screen >

S Window Division >

  • Previous Screen
  • Next Screen

O Start Anlc-EMlch

  • B Camera

® Playback

£ FTZ Control

Figure 2-2 Right Click Shortcut Menu

2.2 PTZ Control

      1. Configure PTZ Parameter

You shall configure PTZ parameters before controlling a PTZ camera.

Steps

  1. Preview a camera in live view and click 0 on shortcut menu.
PTZ

Slow

Çq~ j cCJ

 »

“1 j □

 X

Fast
Preset Patrol Pattern
I Preset 1
Preset 2

Preset 3

Preset 4

Preset 5

Preset 6

Preset 7

Preset 8

Preset 9

Preset 10

Preset 11

Preset 12

 \* \* \* \*

\* \*

\* \* \* \* \*
Figure 2-3 PTZ Settings

  1. Click .
  2. Set the PTZ camera parameters.

Cl] Note

All parameters should be the same as the PTZ camera.

  1. Click OK.

PTZ Control Panel Introduction

Table 2-3 PTZ Panel Description

Icon Description
Direction buttons, and the auto-cycle button.
Fast The speed of the PTZ movement.
CT / Cf Zoom -/+.
1 / Ö Focus -/+.
/ © Iris -/+.
      1. Customize Preset

Set a preset location where the PTZ camera would point to when an event occurs.

Steps

  1. Preview a camera in live view and click A on shortcut menu.
  2. Select a desired preset in preset list.
  3. Use direction buttons to wheel the camera to required locations. Adjust zoom and focus as your desire.
  4. Click \* .

What to do next

Double click a preset in the preset list to call it.

      1. Customize Patrol

Patrol refers to a path consists of a series of presets with designated sequence. It provides dynamic live image for monitoring several presets.

Steps

  1. Preview a camera in live view and click on A shortcut menu.
  2. Click Patrol.
  3. Click 22 of a desired patrol.
  4. Click .
  5. Configure key point parameters, such as the key point No., duration of staying for one key point and speed of patrol. The key point is corresponding to the preset. The preset number determines the order at which the PTZ will follow while cycling through the patrol. Duration refers to the time span to stay at the corresponding key point. Speed defines the speed at which the PTZ will move from one key point to the next.

word image 1875 5

Figure 2-4 Patrol Settings

  1. Click OK.
  2. Click Save.

What to do next

Select a patrol and click to call it. The PTZ camera will move according the predefined patrol path.

      1. Customize Pattern

A pattern records the movement path and dwell time in a certain position. When you call a pattern, the PTZ camera will move according to the recorded path.

Steps

  1. Preview a camera in live view and click A on shortcut menu.
  2. Click Pattern.
  3. Select a pattern.
  4. Click O .
  5. Use direction buttons to wheel the camera to required locations. Adjust zoom and focus as your desire.
  6. Click ® . The previous PTZ camera moving path is recorded as a pattern.

What to do next

Select a pattern and click to call it. The PTZ camera will move according the predefined pattern.

Chapter 3 Playback

3.1 GUI Introduction

Go to Playback .

word image 1875 6

Figure 3-1 Playback

Table 3-1 Playback Interface Description

Button Operation Button Operation
30 s reverse. [gj 30 s forward.
ES Full screen. □ Start playback.
□ Speed down. E3 Speed up.
Speed.
10 1′ r 11 -14 17
I IZ

Figure 3-2 Timeline

  • Position the cursor on the timeline, drag the timeline to position to a certain time.
  • Period marked with blue bar contains video. Red bar indicates the video in the period is event video.
  • Scroll up/down to zoom out/in timeline.

3.2 Normal Playback

Play back normal videos.

Steps

  1. Go to Playback .
  2. Select a camera from the camera list.
  3. Select a date on the calendar for playback.

Ui Note

The blue triangle at the calendar date corner indicates there are available videos. For example, 22^ means video is available. means no video.

  1. Optional: Position the cursor on playback window to show control bar.

di <a e® n a x

Figure 3-3 Control Bar

Table 3-2 Button Description

Button Description Button Description
□ □ H □ 0 Window division, group the channels and play. □ Zoom in/out playback image.
□ Turn on/off audio. □ Add tag.
Lock/unlock video. □ Clip video.
□ Show videos that contain human. □ Show videos that contain vehicle.
Skip Normal Videos If you have clicked Q / HJ , the device will hide other videos, and only show and play videos that contain human or vehicle during playback.

3.3 Event Playback

When you select the event playback mode, the system will analyze and mark videos that contain the motion detection, line crossing detection, or intrusion detection information, .

Before You Start

  • Ensure the camera has enabled Dual-VCA. You can enable it via the camera web browser interface in Configuration ^ Video/Audio ^ Display Info. on Stream .
  • Ensure your video recorder has enabled Save VCA Data. You can enable it in Configuration ^ Record ^ Advanced .

Steps

  1. Go to Playback .
  2. Click Event.
  3. Select a camera.

word image 1875 7

Figure 3-4 Event Playback

4. Position the cursor on playback window to show control bar.

Table 3-3 Button Description

Button Description Button Description
H Add tag. El Zoom in/out playback image.
□ Clip video. El Lock/unlock video.
Fl Configure detection area. n Turn on/off audio.

5. Click ¡3 to set detection areas of line crossing detection, intrusion detection, or motion

detection.

  1. Click g] to search videos. Videos meet the detection rule requirement will be marked in red.
  2. Click E5 to configure the play strategy.

Do not Play Normal Videos

If it is enabled, videos without smart information will not be played.

Normal Video

Set normal video playback speed. The option is only valid when Do not Play Normal Videos is unchecked.

Play Speed of Smart/Custom Video

Set playback speed of videos with smart information. The option is only valid when Do not Play Normal Videos is enabled.

word image 1875 8

Figure 3-5 Play Strategy

3.4 Back up Clip

You can clip videos during playback. Video clips can be exported to the backup device (USB flash drive, etc.).

Before You Start

Connect a backup device to your video recorder.

Steps

  1. Start playback. Refer to Normal Playback for details.
  2. Click ;: .
  3. Set the start and end time. You can also adjust cursors on the time bar to set the time period.
  4. Click Save.
  5. Select the backup device and folder.
  6. Click Save to export the clip to backup device.
  7. File Search
    1. Search File

Steps

  1. Go to Search .

word image 1875 9

Figure 4-1 Search

2. Select a search type (video, picture, event, etc.).

3. Set search conditions.

4. Click Search.

– Click to play the video.

– Click c? to lock the file. Locked file will not be overwritten.

– Select file(s), and click Export to export file(s) to backup device.

    1. Quick Backup

Before You Start

Connect a backup device to your video recorder.

Steps

  1. Go to Search .
  2. Set search conditions.
  3. Click Quick Export.
  4. Select backup device and path.
  5. Click OK to start exporting.
  6. Configuration (Easy Mode)

Easy mode contains basic configurations. Go to Configuration , and click Easy Mode.

    1. System Configuration

5.1.1 General

You can configure the output resolution, system time, etc.

Steps

  1. Go to Configuration ^ System ^ General .

System Date 22-06-2020

System Time 07:50:00

Resolution 1920*1080/60Hz(1080P)(R< ~

Wizard

Lock Screen Password

word image 1875 10

Figure 5-1 General Settings

  1. Configure the parameters as your desire.

Wizard

The wizard will pop up after the device starts up.

Lock Screen Password

You need to enter your password if the screen is locked.

NTP Time Sync

Network time protocol (NTP) is a networking protocol for time synchronization. The device can connect to NTP (network time protocol) server to sync time.

Interval (min)

Time interval between two time synchronization with NTP server.

NTP Server

IP address of the NTP server.

  1. Click Apply.
  2. 1.2 User

Add User

There is a default account: Administrator. The administrator user name is admin. Administrator has the permission to add, delete, and edit user. Guest user only has live view, playback, and log search permission.

Steps

  1. Go to Configuration ^ System ^ User .
  2. Click Add and confirm your admin password.

word image 1875 11

Figure 5-2 Add User

  1. Enter user name.
  2. Enter the same password in Password and Confirm.

/K Warning

We highly recommend you create a strong password of your own choosing (Using a minimum of 8 characters, including at least three of the following categories: upper case letters, lower case letters, numbers, and special characters.) in order to increase the security of your product. And we recommend you reset your password regularly, especially in the high security system, resetting the password monthly or weekly can better protect your product.

  1. Click OK.

– Click / ® to edit/delete user.

Set Password Resetting Email

When you forget your login pattern and password, the device will send an email contains verification code to your email for password resetting.

Steps

  1. Go to Configuration ^ System ^ User .
  2. Click Password Resetting Email.
  3. Enter admin password for authorization.
  4. Enter an email address.
  5. Click OK.

Reset Password

You can reset your password when you forgot your login pattern and password.

Steps

  1. Click Forgot Password at the password login interface.
  2. Click Next if you agree the Privacy Policy, you can scan the QR code to read it.
  3. Follow the wizard to reset password.

5.1.3 Exception

You can receive exception events hint in alarm center, and set exception linkage actions.

Steps

  1. Go to Configuration ^ System ^ Exception .
  2. Optional: Configure event hint. When the set events occur, you will receive hints in alarm center.
  3. Enable Event Hint.
  4. Click 0 at the upper-right corner of local menu to enter alarm center.
  5. Select an event type.
  6. Click Set to select events to hint.
  7. Set Exception Type
  8. Select Normal Linkage and Trigger Alarm Output type for exception linkage actions.

word image 1875 12

Figure 5-3 Exceptions

  1. Click Apply.

5.2 Network Configuration

      1. General

You shall properly configure the network settings before operating the device over network.

Steps

  1. Go to Configuration ^ Network ^ General .

word image 1875 13

Figure 5-4 Network

  1. Set network parameters.

DHCP

If the DHCP server is available, you can enable DHCP to automatically obtain an IP address and other network settings from that server.

Auto Obtain DNS

If DHCP is enabled. You can enable Auto Obtain DNS to automatically obtain Preferred DNS Server and Alternate DNS Server.

  1. Click Apply.
  2. 2.2 HiLookVision

HiLookVision provides mobile phone application and platform service to access and manage your connected devices, which enables you to get a convenient remote access to the video security system.

Steps

  1. Go to Configuration ^ Network ^ HiLookVision .
  2. Select Access Type as HiLookVision.
  3. Turn on Enable. The service terms will pop up.
  4. Scan the QR code to read the service terms and privacy statement.
  5. Check I have read and agree to Service Terms and Privacy Statement if you agree with the service terms and privacy statement.
  6. Click OK.
  7. Click .£ to set verification code.
  8. Optional: Enable Stream Encryption. It requires to enter verification code in remote access and live view after this function is enabled.
  9. Optional: Edit Server IP.
  10. Bind your device with a HiLookVision account.
  • ) Use a smart phone to scan the QR code, and download HiLookVision app. You can also download it from https://appstore.hikvision.com, or the QR code below. Refer to HiLookVision Mobile Client User Manual for details.

word image 1875 14

Figure 5-5 Download HiLookVision

2) Use HiLookVision to scan the device QR, and bind the device.

ÜU Note

  • If the device is already bound with an account, you can click Unbind to unbind with the current account.
  • You can also use the QR code in gg at the upper-left corner to download HiLookVision and bind your device.
  1. Click Apply.

What to do next

You can access your video recorder via HiLookVision.

5.2.3 Email

Set an email account to receive event notification.

Before You Start

  • Ensure SMTP service is available for your email.
  • Configure your network parameters. Refer to General for details.

Steps

  1. Go to Configuration ^ Network ^ Email .

word image 1875 15

Figure 5-6 Email

  1. Set email parameters

Server Authentication

Check it to enable the server authentication feature.

User Name

The user account of email sender for SMTP server authentication.

Password

The password of email sender for SMTP server authentication.

SSL/TLS

(Optional) Enable SSL/TLS if it is required by the SMTP server.

Attached Picture

(Optional) If events are triggered, it will send images as email attachment.

Sender

The sender name.

Sender’s Address

The sender’s email address.

Select Receiver

Select a receiver. Up to 3 receivers are available.

Receiver

The receiver name.

Receiver’s Address

The receiver’s email address.

OS Note

For network cameras, the event images are directly sent as the email attachment. One network camera only sends one picture.

  1. Optional: Click Test to send a test email.
  2. Click Apply.

5.3 Camera Management

      1. Configure Signal Input

For certain digital video recorder models, you can configure the analog and IP signal input types.

Steps

  1. Go to Configuration ^ Camera ^ Analog ^ Analog .
  2. Select signal input type as HD/CVBS or IP for each channel.

HD/CVBS

Four types of analog signal inputs including Turbo HD, AHD, HDCVI, and CVBS can be connected randomly for the channel.

IP

Network camera can be connected for the channel.

No I ©HD/CVBS s OIP
A1 <s> o
A2 ® o
A3 ® o
A4 ® o
A5 ® o
Afi o

Figure 5-7 Signal Input Type

  1. Click Apply. You can view the maximum network camera accessible number in Max. IP Camera Number.
      1. Network Camera

Add Network Camera by Device Password

Add network cameras which the password is the same as your video recorder.

Before You Start

  • Ensure your network camera is on the same network segment with your video recorder.
  • Ensure the network connection is valid and correct. Refer to General for details.
  • Ensure the network camera password is the same as your video recorder.

Steps

1. Go to Configuration ^ Camera ^ IP Camera . The online cameras on the same network segment with your video recorder are displayed in Online Device List.

I v Online Device List

4- Add | O Refresh

0 I No. i I IP Address i I Status I Protocol I Operation I Device Model I Serial No.

0 1 !■ ts:i™ A Already connected. »MkBBB ar I

Figure 5-8 IP Camera Management Interface

  1. Select a desired network camera.
  2. Click to add the camera.

C®Note

If the camera is inactive, the device will activate it automatically with the password you have set during device activation.

Add Network Camera Manually

Before You Start

  • Ensure your network camera is on the same network segment with that of your video recorder.
  • Ensure the network connection is valid and correct.
  • Ensure the network camera is activated.

Steps

  1. Go to Configuration ^ Camera ^ IP Camera .
  2. Click in Added Device List.
  3. Set network camera parameters, including IP address, protocol, management port, etc.
  4. Optional: Enable Use Camera Activation Password to use the device password to add network camera(s).
  5. Optional: Click Add More to add another network camera.
  6. Click Add.

Add IP Camera (Custom) x

O Refresh

No. i I IP Address i I Status I Protocol I Management Port I Device

word image 1875 16 1 MBMH9 △ (MBMBM MM ■ I C|

IP Camera Address Protocol

Management Port Transfer Protocol User Name Camera Password Use Camera Activation …

G»

Add

Figure 5-9 Add Network Camera

Edit Connected Network Camera

You can edit the IP address, protocol and other parameters of the added network cameras.

Steps

  1. Go to Configuration ^ Camera ^ IP Camera .
  2. Click to edit the selected camera.

Channel Port

If the connected device is an encoding device with multiple channels, you can select the channel port No. to choose a connecting channel.

  1. Click OK.
      1. OSD Settings

Configure OSD (On-Screen Display) settings for the camera, including date format, camera name, etc.

Steps

  1. Go to Configuration ^ Camera ^ OSD .
  2. Select a camera.

word image 1875 17

Figure 5-10 OSD

  1. Set parameters as your desire.
  2. Drag the text frames on the preview window to adjust the OSD position.
  3. Click Apply.
      1. Motion Detection

Motion detection enables the video recorder to detect the moving objects in the monitored area and trigger alarms.

Steps

  1. Go to Configuration ^ Camera ^ Motion Detection .
  2. Select a camera.
  3. Check Enable.
  4. Set the motion detection area.
  • Click Draw Area or Clear to draw or clear areas. The first area is set as full screen by default.
  • Click Full Screen to set the motion detection area as full screen. You can drag on the preview window to draw motion detection areas.

The operation may differ according to different models.

  1. Adjust Sensitivity. Sensitivity allows you to calibrate how readily movement triggers the alarm. A higher value results in the more readily to triggers motion detection.
  2. Set analysis mode as AI or PIR.

AI

The motion detection event will be analyzed by your device.

PIR

The motion detection event will be analyzed by certain analog PIR cameras.

  1. Optional: Set Target Detection as Human or Vehicle to discard alarms which are not triggered by human or vehicle.

This function is only available for certain models.

  1. Set the arming schedule. Refer to Configure Arming Schedule for details.
  2. Set the linkage actions. Refer to Configure Alarm Linkage Action for details.
  3. Click Apply.
      1. Configure Arming Schedule

Steps

  1. Select Arming Schedule.
  2. word image 1875 18 Choose one day of a week and set the time segment. Up to eight time periods can be set within each day.

Note

Time periods shall not be repeated or overlapped.

word image 1875 19

Figure 5-11 Set Arming Schedule

  1. Click Apply.
      1. Configure Alarm Linkage Action

Alarm linkage actions will be activated when an alarm or exception occurs.

Steps

  1. Click Linkage Action.
  2. Set normal linkage actions, alarm output linkage actions, trigger channel, etc.

Alarm Pop-up Window

The local monitor will pop up the alarming channel image when an alarm is triggered. It requires to select the alarming channel(s) in Trigger Channel.

Buzzer Alarm

It will trigger a buzzer beep when an alarm is triggered.

Notify Surveillance Center

The device will send an exception or alarm signal to the remote client software when an alarm is triggered.

Send Email

It will send an email with alarm information when an alarm is triggered.

PTZ Linkage

It will trigger PTZ actions (e.g., call preset/patrol/pattern) when smart events occur.

Audio and Light Alarm Linkage

For certain network cameras, you can set the alarm linkage action as audio alarm or light alarm.

C®Note

  • Ensure your camera supports audio and light alarm linkage.
  • Ensure the audio output and volume are properly configured.
  • If you require to set audio and light parameters, please log into the network camera via web browser to configure them.
  1. Click Apply.

5.4 Recording Management

      1. Storage Device

Initialize HDD

A newly installed hard disk drive (HDD) must be initialized before it can be used to save videos and information.

Before You Start

Install at least an HDD to your video recorder. For detailed steps, refer to Quick Start Guide.

Steps

  1. Go to Configuration ^ Record ^ Storage .
  2. Select an HDD.
  3. Click Init.

Repair Database

Repair an HDD that with error in database. Please operate it with the help of professional technical support.

Secure Erase

Secure erase will delete videos in the selected disk(s).

Add Network Disk

You can add the allocated NAS or IP SAN disk to the video recorder, and use it as a network HDD.

Steps

  1. Go to Configuration ^ Record ^ Storage .
  2. Click Add.
  3. Select NetHDD.
  4. Set Type as NAS or IP SAN.
  5. Enter NetHDD IP address.
  6. Click to search the available disks.

word image 1875 20

Figure 5-12 Add NetHDD

7. Select NAS disk from the list, or manually enter the directory in NetHDD Directory.

8. Click OK. The added NetHDD will be displayed in the storage device list.

5.4.2 Configure Recording Schedule

Video recorder will automatically start/stop recording according to the configured schedule.

Configure Continuous Recording

Steps

  1. Go to Configuration ^ Record ^ Parameter .
  2. Set the continuous main stream/sub-stream recording parameters for the camera. Refer to Configure Recording Parameter for details.
  3. Go to Configuration ^ Record ^ Schedule .
  4. Select recording type as Continuous. Refer to Edit Schedule for details.

Configure Event Recording

You can configure the recording triggered by the motion detection, line crossing detection, and intrusion detection.

Steps

  1. Go to Configuration ^ Event ^ Smart Event .
  2. Configure the event detection and select the channels to trigger the recording when an event occurs.
  3. Go to Configuration ^ Record ^ Parameter .
  4. Set the continuous main stream/sub-stream recording parameters for the camera. Refer to

Configure Recording Parameter for details.

  1. Go to Configuration ^ Record ^ Schedule .
  2. Select recording type as Event. Refer to Edit Schedule for details.

Edit Schedule

word image 1875 21

Steps

1. Go to Configuration ^ Record ^ Schedule .

Figure 5-13 Recording Schedule

Continuous

Continuous recording.

Event

Recording is triggered by events.

  1. Select a camera in Camera No.
  2. Turn on Enable.
  3. Configure the recording schedule.
  4. Click Edit.

Edit Schedule

Draw

Schedule

5. Click Apply.

  1. Select a day to configure in Weekday.
  2. To set an all-day recording schedule, check All Day and select schedule type.
  3. To set other schedules, uncheck All Day, and set Start/End Time and schedule type.

C@Note

Up to 8 periods can be configured for each day. And the time periods cannot be overlapped with each other.

  1. Click OK to save the settings and go back to upper level menu.
  2. Click to select schedule type as Continuous or Event.
  3. On the table, drag the mouse on the desired period to draw a colored bar.

5.4.3 Configure Recording Parameter

Steps

  1. Go to Configuration ^ Record ^ Parameter .
  2. Configure recording parameters.

Main Stream

Main stream refers to the primary stream that affects data recorded to the hard disk drive and will directly determine your video quality and image size. Comparing with the sub­stream, the main stream provides a higher quality video with higher resolution and frame rate.

Sub-Stream

Sub-stream is a second codec that runs alongside the mainstream. It allows you to reduce the outgoing internet bandwidth without sacrificing your direct recording quality. Sub-stream is often exclusively used by smartphone applications to view live video. Users with limited internet speeds may benefit most from this setting.

Frame Rate

Frame rate refers to how many frames are captured each second. A higher frame rate is advantageous when there is movement in the video stream, as it maintains image quality throughout.

Resolution

Image resolution is a measure of how much detail a digital image can hold: the greater the resolution, the greater the level of detail. Resolution can be specified as the number of pixel­columns (width) by the number of pixel-rows (height), e.g.,1024×768.

Bitrate

The bit rate (in Kbit/s or Mbit/s) is often referred to as speed, but actually defines the number of bits/time unit and not distance/time unit.

C®Note

Higher resolution, frame rate, and bitrate provide you better video quality, but it also requires more internet bandwidth and uses more storage space on the hard disk drive.

  1. Click Apply.

Chapter 6 Configuration (Expert Mode)

Go to Configuration , and click Expert Mode at the lower-left corner.

    1. System Configuration
      1. General

Configure Basic Settings

You can configure the language, system time, output resolution, mouse pointer speed, lock screen password, etc.

Go to Configuration ^ System ^ General ^ Basic Settings , configure the parameters as your desire, and click Apply.

Language

The default language is English.

VGA/HDMI Resolution

Select the output resolution, which must be the same with the resolution of the VGA/HDMI display.

Lock Screen Password

You need to enter password for authentication if the screen is locked.

Mouse Pointer Speed

Set the speed of mouse pointer; 4 levels are configurable.

Wizard

The wizard will pop up after the device starts up.

word image 1875 22

Figure 6-1 Basic Settings

Configure DST Settings

DST (Daylight Saving Time) refers to the period of the year when clocks are moved one period ahead. In some areas worldwide, this has the effect of creating more sunlit hours in the evening during months when the weather is the warmest.

Go to Configuration ^ System ^ General ^ DST Settings , configure the parameters as your desire, and click Apply.

Configure More Settings

You can configure your device name, lock screen time, output mode, etc.

Go to Configuration ^ System ^ General ^ More Settings , configure the parameters as your desire, and click Apply.

Device Name

Edit the video recorder name.

Device No.

The number is required in the connection with remote control, network keyboard, etc. Edit the serial number of video recorder. The device number ranges from 1 to 255, and the default value is 255.

Lock Screen

Set timeout time for lock screen.

Menu Output Mode

Choose output to display local menu.

CVBS Output Brightness

Adjust the brightness of CVBS output image.

Output Standard

PAL and NTSC are selectable.

Enhanced IP Mode

Enabling enhanced IP mode will allow you to connect to the maximum number of cameras, but disable 2K/4K output resolution, and make perimeter protection, human or vehicle detection of motion detection, facial detection and face picture comparison functions unavailable in analog channel.

      1. Live View

Configure General Parameters

You can configure the output interface, mute or turning on the audio, event output interface, etc.

Steps

  1. Go to Configuration ^ System ^ Live View ^ General .

word image 1875 23

Figure 6-2 Live View-General

  1. Configure the Live View parameters.

Window Division

Select the live view window division.

Auto Switch Interval

The time to dwell in a camera before switching to next camera when auto-switch in live view is enabled.

Alarm Pop-up Output

Select the output to show alarm video.

Alarm Pop-up Delay

Set the time to show alarm event image.

Audio

Turn on/off audio output for the selected video output.

Volume

Adjust the live view, playback, and two-way audio volume for the selected video output interface.

  1. Click Apply.

Configure Live View Layout

Steps

  1. Go to Configuration ^ System ^ Live View ^ View .
  2. Set Output Interface.
  3. Select a window, and double click a camera the list you would like to display. + means no camera is displayed on the window.
  4. Optional: Click or (Q to start or stop live view of all cameras.
  5. Click Apply.

Configure Channel-Zero Encoding

Enable the channel-zero encoding when you need to get a remote view of many channels in real time from a web browser or CMS (Client Management System) software, in order to decrease the bandwidth requirement without affecting the image quality.

Steps

  1. Go to Configuration ^ System ^ Live View ^ General .
  2. Set Video Output Interface as Channel-Zero.
  3. Go to Configuration ^ System ^ Live View ^ Channel-Zero .

word image 1875 24

Figure 6-3 Channel-Zero

  1. Turn on Enable.
  2. Configure Frame Rate, Max. Bitrate Mode, and Max. Bitrate. The higher frame rate and bitrate require higher bandwidth requirement.
  3. Click Apply.
  4. 1.3 User

Refer to User for details.

6.2 Network Configuration

      1. TCP/IP

TCP/IP must be properly configured before you operate video recorder over network.

Steps

  1. Go to Configuration ^ Network ^ General ^ TCP/IP .
  2. Configure network parameters.

Working Mode

Multi-address Mode

The parameters of the two NIC cards can be configured independently. You can select LAN1 or LAN2 in the NIC type field for parameter settings. You can select one NIC card as default route. And then the system is connecting with the extranet and the data will be forwarded through the default route.

Net-fault Tolerance Mode

The two NIC cards use the same IP address, and you can select the Main NIC to LAN1 or LAN2. By this way, in case of one NIC card failure, the video recorder will automatically enable the other standby NIC card so as to ensure the normal running of the whole system.

Load Balance Mode

By using the same IP address and two NIC cards share the load of the total bandwidth, which enables the system to provide two Gigabit network capacity.

C®Note

Working mode is only available for certain models.

NIC Type

Select NIC type as your desire. If your device supports Wi-Fi dongle function, the NIC of Wi-Fi dongle would be selectable after a suitable Wi-Fi dongle is installed.

DHCP

If the DHCP server is available, you can check Enable DHCP to automatically obtain an IP address and other network settings from that server.

MTU

The maximum transmission unit (MTU) is the size of the largest network layer protocol data unit that can be communicated in a single network transaction.

Default Route

Select a route as your desire. If your device supports Wi-Fi dongle function, the route of Wi-Fi dongle would be selectable after a suitable Wi-Fi dongle is installed.

Auto Obtain DNS

If DHCP is checked. You can check Obtain DNS Automatically to obtain Preferred DNS Server and Alternate DNS Server.

  1. Click Apply.
      1. DDNS

Dynamic domain name server (DDNS) maps dynamic user IP addresses to a fixed domain name server.

Before You Start

Register DynDNS, PeanutHull and NO-IP services with your ISP.

Steps

  1. Go to Configuration ^ Network ^ General ^ DDNS .

word image 1875 25

Figure 6-4 DDNS

  1. Turn on Enable.
  2. Select a DDNS type.
  3. Enter parameters including service address, domain name, etc.
  4. Click Apply.

What to do next

You can view DDNS status in Status.

      1. NAT

Two ways are provided for port mapping to realize the remote access via the cross-segment network, UPnP™ and manual mapping.

Before You Start

Enable the UPnP™ function of your router if UPnP™ is required. When the device network working mode is multi-address, the default device route should be on the same network segment as the LAN IP address of the router.

Steps

  1. Go to Configuration ^ Network ^ General ^ NAT .

Enable «d

Mapping Type Manual v

O Refresh
Type 1 Operation 1 External Port I External IP Address I Internal Port I UPnP Status
HTTP Port 80 0.0.0.0 80 Inactive
RTSP Port 554 0.0.0.0 554 Inactive
Server Port £. 8000 0.0.0.0 8000 Inactive
HTTPS Port £ 443 0.0.0.0 443 Inactive
HIK Cloud P2P Comman.. £. 9010 0.0.0.0 9010 Inactive
Cloud P2P Data Port 9020 0.0.0.0 9020 Inactive

Apply

Figure 6-5 NAT

  1. Turn on Enable.
  2. Select Mapping Type as Manual or Auto

Auto The port mapping items are read-only, and the external ports are set by the router automatically. You can click Refresh to get the latest status of the port mapping.

Manual Select an external port type. Click to edit External Port. You can use the default external port No., or change it according to actual requirements. External Port indicates the port No. for port mapping in the router.

The value of the RTSP port No. should be 554 or between 1024 and 65535, while the value of the other ports should be between 1 and 65535 and the value must be different from each other. If multiple devices are configured for the UPnP™ settings under the same router, the value of the port No. for each device should be unique.

  1. Set the virtual server of your router, including internal source port, external source port, etc. The virtual server parameters shall be corresponding with your device port.
      1. Wi-Fi

For certain models, after installing a Wi-Fi dongle to your device, the device would be able to connect to a wireless network, and the channels in your device can be viewed thorough Wi-Fi. For example, if your device is connected with several network cameras or analog cameras (Wi-Fi network cameras currently cannot be connected), after the device is connected to a wireless network, you would be able to access your device and view the connected channels through Wi-Fi.

Before You Start

  • Prepare a suitable Wi-Fi dongle, and insert it in to the USB interface at the rear panel.
  • Ensure your device support this function.

Steps

1. Go to Configuration ^ Network ^ General ^ Wi-Fi .

LJilNote

The Wi-Fi setting interface will automatically pop up when you insert the Wi-Fi dongle for the first time.

2. Connect to a wireless network.

Connect to an Automatically Searched Wireless Network
  1. Double click the wireless network from the list as you desired.
  2. Set wireless network parameters.
  3. Click OK.
Connect to a Customized Wireless Network
  1. Click Custom Adding.
  2. Set wireless network parameters.
  3. Click OK.
Connect to a Wireless Network with WPS (Wi-Fi Protected Setup)
  1. Click WPS Settings.
  2. Check Enable WPS.
  3. Set wireless network parameters.
  4. Click Apply.

Mil Note

If you requires to edit or forget the network, double click the connected network, and edit it as your desire.

After connecting to an available wireless network, you can view the connection result in Connection Status.

  1. Go to Configuration ^ Network ^ General ^ TCP/IP .
  2. Set Select NIC and Default Route as WLAN0.
  3. Check Enable Wi-Fi.
  4. Set other network parameters.
  5. Click Apply.

6.2.5 Log Server Settings

Upload Logs to the Server

You can upload system logs to the server for backup.

Steps

  1. Go to Configuration ^ Network ^ General ^ Log Server Settings .

Enable

Upload Time Interval (h)

Server IP Address

Port

Apply

Figure 6-6 Log Server Settings

  1. Turn on Enable
  2. Set Upload Time Interval, Server IP Address, and Port.
  3. Optional: Click Test to test if parameters are valid.
  4. Click Apply.

One-Way Authentication

You can install a CA certificate (from the server) to your device to authorize the server via web browser. It would improve the log communication security.

Before You Start

  • Download the CA certificate from the server.
  • Ensure log server parameters are valid.

Steps

  1. Go to Configuration ^ Network ^ Advanced Settings ^ Log Server Configuration .

word image 1875 26

Figure 6-7 One-Way Authentication

  1. Install the CA certificate in CA Certificate.
  2. Optional: Click Test to test if the connection is valid.
  3. Click Save.

Two-Way Authentication

You can install a CA certificate (from the server) to your device to authorize the server, and create a certificate (from your device) to authorize your device by the server. This would improve the log communication security. Two-way authentication can be configured via web browser.

Before You Start

  • Download the CA certificate from the server.
  • Ensure log server parameters are valid.

Steps

  1. Go to Configuration ^ Network ^ Advanced Settings ^ Log Server Configuration .

word image 1875 27

Figure 6-8 Two-Way Authentication

  1. Install the CA certificate in CA Certificate.
  2. Click Create in Client Certificate, and follow the pop-up to create the certificate.
  3. Click Download to download the certificate file to a desired location.
  4. Upload the downloaded certificate file to the server, and the server will return the certificate key.
  5. Open the certificate as a text file, and modify it by the certificate key as the server returned.
  6. Install the modified certificate in Client Certificate.
  7. Optional: Click Test to test if the connection is valid.
  8. Click Save.
  9. .6 NTP

Your device can connect to a network time protocol (NTP) server to ensure that the system time is accurate.

Steps

  1. Go to Configuration ^ Network ^ General ^ NTP .
  2. Turn on Enable.
  3. Enter the parameters.

Interval

Time interval between two time synchronization with NTP server.

NTP Server

IP address of the NTP server.

  1. Click Apply.
      1. Ports (More Settings)

Set different port types to enable relevant functions as your desire.

Go to Configuration ^ Network ^ General ^ More Settings .

Alarm Host IP/Port

The device will send the alarm event or exception message to the alarm host when an alarm is triggered. The remote alarm host must have the client management system (CMS) software installed.

Alarm Host IP refers to the IP address of the remote PC on which the CMS software (e.g., iVMS-4200) is installed, and the Alarm Host Port (7200 by default) must be the same as the alarm monitoring port configured in the software.

Server Port

For remote client software access. Ranges from 2000 to 65535. The default value is 8000.

HTTP Port

For remote web browser access. The default value is 80.

Multicast IP

Multicast can be configured to enable live view for cameras that exceed the maximum number allowed through network. A multicast IP address covers Class-D IP ranging from 224.0.0.0 to 239.255.255.255 and it is recommended to use the IP address ranging from 239.252.0.0 to 239.255.255.255.

When adding a device to the CMS software, the multicast address must be the same as that of the device.

RTSP Port

RTSP (Real Time Streaming Protocol) is a network control protocol designed for use in entertainment and communications systems to control streaming media servers. The port is 554 by default.

Output Bandwidth Limit

You can check the checkbox to enable output bandwidth limit.

Output Bandwidth

After enable the output bandwidth limit, input the output bandwidth.

C®Note

  • The output bandwidth limit is used for the remote live view and playback.
  • The default output bandwidth is the maximum limit.

word image 1875 28

Figure 6-9 Port Settings

      1. HiLookVision

Go to Configuration ^ Network ^ Platform Access . Refer to HiLookVision for details.

      1. Email

Go to Configuration ^ Network ^ Email . Refer to Email for details.

6.3 Camera Management

      1. Configure Signal Input

For certain digital video recorder models, you can configure the analog and IP signal input types.

Steps

  1. Go to Configuration ^ Analog ^ Analog , or click Edit at the upper-right corner in Configuration ^ Camera ^ Camera .
  2. Select signal input type as HD/CVBS or IP.

HD/CVBS

Four types of analog signal inputs including Turbo HD, AHD, HDCVI, and CVBS can be connected randomly for the channel.

IP

Network camera can be connected for the channel.

word image 1875 29

Figure 6-10 Signal Input Type

3. Click Apply. You can view the maximum network camera accessible number in Max. IP Camera Number.

      1. Network Camera

Add Automatically Searched Online Network Camera

Add the network cameras to your video recorder.

Before You Start

  • Ensure your network camera is on the same network segment with your video recorder.
  • Ensure the network connection is valid and correct.
  • Ensure the network camera password is the same as your video recorder.

Steps

  1. Go to Configuration ^ Camera ^ Camera .
  2. Click Online Device List. The online cameras on the same network segment will be displayed in the list.

word image 1875 30

Figure 6-11 Online Device

3. Optional: Click Edit IP to edit camera IP addresses in batch. The system will allocate IP addresses to the selected cameras in order.

0X1 Note

Ensure the selected cameras are activated.

  1. Select a network camera, and click Add to add it.

Add Network Camera Manually

Add the network cameras to your video recorder.

Before You Start

  • Ensure your network camera is on the same network segment with that of your video recorder.
  • Ensure the network connection is valid and correct.
  • Ensure the network camera is activated.

Steps

  1. Go to Configuration ^ Camera ^ Camera .
  2. Click .

Add IP Camera (Custom) x

O Refresh

No. î I IP Address i I Status I Protocol I Management Port I Device

word image 1875 31 1 v m △ mb mm ■ ci

IP Camera Address Protocol

word image 1875 32 Management Port Transfer Protocol User Name Camera Password Use Camera Activation …

Cancel

Add

Figure 6-12 Add IP Camera

  1. Enter network camera parameters.

Use Camera Activation Password

If it is enabled, the video recorder will add the camera by the set channel default password.

  1. Click Add.

Edit Connected Network Camera

You can edit the IP address, protocol and other parameters of the added network cameras.

Steps

  1. Go to Configuration ^ Camera ^ Camera ^ IP Channel .
  2. Click of an added network camera.

Channel Port

If the connected device is an encoding device with multiple channels, you can choose the channel to connect by selecting the channel port No. in the drop-down list.

  1. Click OK.

Import/Export IP Camera Configuration File

The information of added network camera can be generated into an excel file and exported to the local device for backup, including the IP address, port, password of admin, etc. And the exported file can be edited on your computer, like adding or deleting the content, and copy the setting to other devices by importing the excel file to it.

Before You Start

Connect a backup device, such as a USB flash drive, to your video recorder.

Steps

  1. Go to Configuration ^ Camera ^ Camera .
  2. Click More.
  3. Click Export/Import to export/import configuration files to the connected backup device.
  4. Set the storage device and folder path.
  5. Click Export/Import.

What to do next

After the importing process is completed, you must restart the video recorder.

Advanced Settings

Steps

  1. Go to Configuration ^ Camera ^ Camera .
  2. Click More.
  3. Configure the parameters as your desire.

H.265 Auto Switch Configuration

If you enable the option, the device will automatically switch to H.265 stream for the network camera (which supports H.265 video format) for the initial access.

Upgrade

Upgrade the added network cameras.

Export/Import

The information of added network camera can be generated into an excel file and exported to the local device for backup, including the IP address, port, password of admin, etc. And the exported file can be edited on your computer, like adding or deleting the content, and copying the settings to other devices by importing the excel file to it.

Protocol

To connect the network cameras which are not configured with the standard protocols, you can configure the customized protocols for them. The system provides 16 customized protocols.

Camera Activation Password Settings

Change the default password for activating and adding network cameras. For network cameras that are already connected, you can choose to change their passwords to this one in the following pup-up window.

Batch Configuration

The device can automatically synchronize time of the selected network cameras.

      1. Display Settings

Configure the OSD (On-Screen Display), image settings, exposure settings, day/night switch settings, etc.

Steps

  1. Go to Configuration ^ Camera ^ Display .
  2. Set Camera.
  3. Configure parameters as your desire.

OSD Settings

Configure the OSD (On-screen Display) settings for the camera, including date/time, camera name, etc.

Image Settings

Customize the image parameters including the brightness, contrast, and saturation for the live view and recording effect.

Exposure

Set the camera exposure time (1/10000 to 1 sec). A larger exposure value results in a brighter image.

Day/Night Switch

The camera can be set to day, night, or auto switch mode according to the surrounding illumination conditions.

Backlight

Set the camera’s wide dynamic range (0 to 100). When the surrounding illumination and the object have large differences in brightness, you should set the WDR value.

Image Enhancement

For optimized image contrast enhancement.

word image 1875 33

Figure 6-13 OSD

4. Drag the text frames on the preview window to adjust the OSD position.

5. Click Apply.

      1. Privacy Mask

You are allowed to configure the privacy mask areas that cannot be viewed or recorded.

Steps

  1. Go to Configuration ^ Camera ^ Privacy Mask .
  2. Select Camera.
  3. Turn on Enable.

word image 1875 34

Figure 6-14 Privacy Mask

4. Drag to draw an area on the window. The frames of the areas will be marked with different colors.

word image 1875 35

Note

Up to 4 privacy mask areas can be configured. The size of each area can be adjusted.

5. Click Apply.

6.4 Event Configuration

      1. Normal Event

Motion Detection

Motion detection enables the video recorder to detect the moving objects in the monitored area and trigger alarms.

Steps

  1. Go to Configuration ^ Camera ^ Motion Detection .
  2. Select a camera.
  3. Check Enable.
  4. Set the motion detection area.
  • Click Draw Area or Clear to draw or clear areas. The first area is set as full screen by default.
  • Click Full Screen to set the motion detection area as full screen. You can drag on the preview window to draw motion detection areas.
  1. Adjust Sensitivity. Sensitivity allows you to calibrate how readily movement triggers the alarm. A higher value results in the more readily to triggers motion detection.
  2. Set analysis mode as AI or PIR.

AI

The motion detection event will be analyzed by your device.

PIR

The motion detection event will be analyzed by certain analog PIR cameras.

  1. Optional: Set Target Detection as Human or Vehicle to discard alarms which are not triggered by human or vehicle.
  2. Set the arming schedule. Refer to Configure Arming Schedule for details.
  3. Set the linkage actions. Refer to Configure Alarm Linkage Action for details.
  4. Click Apply.

Video Tampering

Trigger alarm when the lens is covered and take alarm response actions.

Steps

1. Go to Configuration ^ Event ^ Normal Event ^ Video Tampering .

word image 1875 36

Figure 6-15 Video Tampering

  1. Set Camera.
  2. Turn on Enable.
  3. Adjust Sensitivity as your desire. The higher the value is, the more easily the video tampering can be triggered.
  4. Set the arming schedule. Refer to Configure Arming Schedule for details.
  5. Set the linkage actions. Refer to Configure Alarm Linkage Action for details.
  6. Click Apply.

Video Loss

Detect video loss of a camera and take alarm response actions.

Steps

  1. Go to Configuration ^ Event ^ Normal Event ^ Video Loss .
  2. Set Camera.
  3. Turn on Enable.
  4. Set the arming schedule. Refer to Configure Arming Schedule for details.
  5. Set the linkage actions. Refer to Configure Alarm Linkage Action for details.
  6. Click Apply.

Alarm Input

Set linkage actions for an external sensor alarm.

Steps

1. Go to Configuration ^ Event ^ Normal Event ^ Alarm Input .

word image 1875 37

Figure 6-16 Alarm Input

Local alarm input: Local alarm input is triggered by the external device that connected to the video recorder’s terminal block.

  1. Click of a desired alarm input.

word image 1875 38

Figure 6-17 Edit Alarm Input

  1. Customize Alarm Name.
  2. Set alarm type as N.O (normally open) or N.C (normally closed).
  3. Set Settings as Input to enable the function.

C®Note

If you set Settings as Nonuse, the alarm input will be disabled. If you set Settings as One-Key Disarming, the selected linkage method(s) of the alarm input will be disabled.

  1. Set the arming schedule. Refer to Configure Arming Schedule for details.
  2. Set the linkage actions. Refer to Configure Alarm Linkage Action for details.
  3. Click Apply.

Alarm Output

Trigger an alarm output when an alarm is triggered.

Steps

word image 1875 39

1. Go to Configuration ^ Event ^ Normal Event ^ Alarm Output .

Figure 6-18 Alarm Output

  1. Click of a desired alarm output.
  2. Customize Alarm Name.
  3. Select Dwell Time.

Edit

Alarm Output No.

Dwell Time | 5s

Alarm Status Close

Alarm Name

word image 1875 40

Arming Schedule

■ Continuous <> Clear Edit ® Clear All

| Copy to Trigger

Figure 6-19 Edit Alarm Output

Apply

  1. Set Settings as Input to enable the function.
  2. Set the arming schedule. Refer to Configure Arming Schedule for details.
  3. Click Apply.

Exception

Exception events can be configured to take the event hint in the live view window and trigger alarm outputs and linkage actions.

Steps

  1. Go to Configuration ^ Event ^ Normal Event ^ Exception .
  2. Configure event hint. When the set events occur, you will receive hints in alarm center.
  3. Enable Event Hint.
  4. Select events to hint. Choose from:
  • Click of Event Hint Configuration to select events.
  • Click gj in the upper-right corner of local menu to enter alarm center to select events.
  1. Select Exception Type to set its linkage actions.

Event Hint «3

Set Event Hint ®

Exception Type HDD Full v

□ Normal Linkage □ Trigger Alarm Output

□ Buzzer Alarm □ 10.6.113.250:8000->1

□ 10.6.113.250:8000->2

□ Notify Surveillance Center

□ Send Email

Apply

Figure 6-20 Exceptions

  1. Set the arming schedule. Refer to Configure Arming Schedule for details.
  2. Click Apply.

6.4.2 Perimeter Protection

Perimeter protection includes line crossing detection, intrusion detection, region entrance detection, and region exiting detection.

C®Note

Perimeter protection is only available for certain device models or camera models.

Line Crossing Detection

Line crossing detection detects people, vehicles, and objects crossing a set virtual line. The detection direction can be set as bidirectional, from left to right or from right to left.

Steps

  1. Go to Configuration ^ Event ^ Perimeter Protection ^ Line Crossing .
  2. Set Camera.
  3. Turn on Enable.
  4. Set the detection rules and detection areas.
  5. Set Arming Area.
  6. Set Direction as A<->B, A->B, or A<-B.

A<->B

Only the arrow on the B side shows. An object crossing a configured line in both directions can be detected and trigger alarms.

A->B

Only an object crossing the configured line from the A side to the B side can be detected.

B->A

Only an object crossing the configured line from the B side to the A side can be detected.

  1. Click Draw Area and draw a quadrilateral in the preview window by specifying four vertexes of the detection region.
  2. Adjust Sensitivity. Sensitivity allows you to calibrate how readily movement triggers the alarm. A higher value results in the more readily to triggers motion detection.
  3. Optional: Set Target Detection as Human or Vehicle to discard alarms which are not triggered by human or vehicle.

C®Note

This function is only available for certain models.

  1. Set the arming schedule. Refer to Configure Arming Schedule for details.
  2. Set the linkage actions. Refer to Configure Alarm Linkage Action for details.
  3. Click Apply.

Intrusion Detection

Intrusion detection function detects people, vehicles, or objects that enter and loiter in a pre­defined virtual region.

Steps

  1. Go to Configuration ^ Event ^ Perimeter Protection ^ Intrusion .
  2. Select Camera to configure.
  3. Turn on Enable.
  4. Set the detection rules and detection areas.
  5. Select Arming Area.
  6. Adjust Time Threshold and Sensitivity.

Sensitivity

The size of the object that can trigger the alarm. The higher the value is, the more easily the detection alarm will be triggered. Its range is [1-100].

Time Threshold

Range [1s-10s], the threshold for the time of the object loitering in the region. When the duration of the object in the defined detection area is longer than the set time, the alarm will be triggered.

  1. Optional: Set Target Detection as Human or Vehicle to discard alarms which are not triggered by human body or vehicle.

US Note

This function is only available for certain models.

  1. Click Draw Area and draw a quadrilateral in the preview window by specifying four vertexes of the detection region.
  2. Set the arming schedule. Refer to Configure Arming Schedule for details.
  3. Set the linkage actions. Refer to Configure Alarm Linkage Action for details.
  4. Click Apply.

Region Entrance Detection

For certain network cameras, region entrance detection function detects people, vehicles or other objects which enter a pre-defined virtual region from the outside place, and some certain actions can be taken when the alarm is triggered.

Steps

  1. Go to Configuration ^ Event ^ Smart Event ^ Region Entrance .
  2. Set Camera.
  3. Turn on Enable.
  4. Optional: Check Save VCA Picture to save the captured pictures of VCA detection.
  5. Set the detection rules and detection areas.
  6. Set Arming Area. Up to 4 arming areas are selectable.
  7. Adjust Sensitivity. Sensitivity: Range [0-100]. The higher the value is, the more easily the detection alarm can be triggered.
  8. Optional: Set Target Detection as Human or Vehicle to discard alarms which are not triggered by human body or vehicle.

C0 Note

This function is only available for certain models.

  1. Click Draw Area and draw a quadrilateral in the preview window by specifying four vertexes of the detection region.
  2. Set the arming schedule. Refer to Configure Arming Schedule for details.
  3. Set the linkage actions. Refer to Configure Alarm Linkage Action for details.
  4. Click Apply.

Region Exiting Detection

For certain network cameras, region exiting detection function detects people, vehicles or other objects which exit from a pre-defined virtual region, and some certain actions can be taken when the alarm is triggered.

Steps

  1. Go to Configuration ^ Event ^ Smart Event ^ Region Exiting .
  2. Set Camera.
  3. Turn on Enable.
  4. Optional: Check Save VCA Picture to save the captured pictures of VCA detection.
  5. Set the detection rules and detection areas.
  6. Set Arming Area. Up to 4 arming areas are selectable.
  7. Adjust Sensitivity. Sensitivity: Range [0-100]. The higher the value is, the more easily the detection alarm can be triggered.
  8. Optional: Set Target Detection as Human or Vehicle to discard alarms which are not triggered by human body or vehicle.

OS Note

This function is only available for certain models.

  1. Click Draw Area and draw a quadrilateral in the preview window by specifying four vertexes of the detection region.
  2. Set the arming schedule. Refer to Configure Arming Schedule for details.
  3. Set the linkage actions. Refer to Configure Alarm Linkage Action for details.
  4. Click Apply.
      1. Configure Arming Schedule

Steps

  1. Click Arming Schedule.
  2. Choose one day of a week and set the time segment. Up to eight time periods can be set within each day.

C® Note

Time periods shall not be repeated or overlapped.

word image 1875 41

Figure 6-21 Set Arming Schedule

  1. Click Apply.
      1. Configure Alarm Linkage Action

Configure Alarm Pop-up Window

When an alarm is triggered, the local monitor displays in full screen the video image from the alarming channel configured for full screen monitoring. And when the alarm is triggered simultaneously in several channels, you must configure the auto-switch dwell time.

Steps

  1. Go to Configuration ^ System ^ Live View ^ General .
  2. Set the event output and dwell time.

Alarm Pop-up Output

Select the output to show event video.

Alarm Pop-up Delay

Set the time in seconds to show alarm event image. If alarms are triggered simultaneously in several channels, their full-screen images will be switched at an interval of 10 seconds (default dwell time).

  1. Click Linkage Action of the alarm detection.
  2. Select Alarm Pop-up Window alarm linkage action.
  3. Select the channel(s) in Trigger Channel settings you want to make full screen monitoring.

C@Note

Auto-switch will terminate once the alarm stops and back to the live view interface.

Configure Buzzer Alarm

The audio warning enables the video recorder to trigger an audible beep when an alarm is detected.

Steps

  1. Go to Configuration ^ System ^ Live View ^ General .
  2. Turn on Audio, and set Volume.
  3. Go to Linkage Action interface of the alarm detection.
  4. Select Buzzer Alarm linkage action.

Notify Surveillance Center

The video recorder can send an exception or alarm signal to the remote alarm host when an event occurs. The alarm host refers to the computer installed with client software (e.g., iVMS-4200, iVMS-5200).

Steps

  1. Go to Configuration ^ Network ^ General ^ More Settings .
  2. Set Alarm Host IP and Alarm Host Port.
  3. Go to Linkage Action interface of the alarm detection.
  4. Select Notify Surveillance Center.

Configure Email Linkage

The video recorder can send an email with alarm information to a user or users when an alarm is detected.

Steps

  1. Go to Configuration ^ Network ^ Email .
  2. Configure the settings.
  3. Go to Linkage Action interface of the alarm detection.
  4. Select Send Email as alarm linkage action.

Trigger Alarm Output

The alarm output can be triggered by the normal and smart events.

Steps

  1. Go to Linkage Action interface of the alarm input or event detection.
  2. Click Trigger Alarm Output.
  3. Select the alarm outputs to trigger.
  4. Go to Configuration ^ Event ^ Normal Event ^ Alarm Output .
  5. Select an alarm output item from the list. Refer to Alarm Output for details.

Configure PTZ Linkage

Video recorder can trigger the PTZ actions (e.g., call preset/patrol/pattern) when the alarm event, or VCA detection events occur.

Steps

  1. Go to Linkage Action interface of the alarm input or VCA detection.
  2. Select PTZ Linkage.
  3. Select the camera to perform the PTZ actions.
  4. Select the preset/patrol/pattern No. to call when the alarm events occur.

word image 1875 42

Figure 6-22 PTZ Linkage

E@Note

You can set one PTZ type only for the linkage action each time.

6.5 Recording Management

      1. Configure Recording Schedule

Video recorder will automatically start/stop recording according to the configured schedule.

Configure Continuous Recording

Steps

  1. Go to Configuration ^ Record ^ Parameter .
  2. Set the continuous main stream/sub-stream recording parameters for the camera.
  3. Go to Configuration ^ Record ^ Schedule .
  4. Select recording type as Continuous.

Configure Event Recording

You can configure the recording triggered by the normal event or smart event.

Steps

  1. Go to Configuration ^ Event .
  2. Configure the event detection and select the cameras to trigger the recording when event occurs.
  3. Go to Configuration ^ Record ^ Parameter .
  4. Set the continuous main stream/sub-stream recording parameters for the camera.
  5. Go to Configuration ^ Record ^ Schedule .
  6. Select recording type as Event.

Edit Schedule

Steps

1. Go to Configuration ^ Record ^ Schedule .

word image 1875 43

Figure 6-23 Recording Schedule

Continuous

Continuous recording.

Event

Recording triggered by all event triggered alarms.

  1. Select a camera in Camera No.
  2. Turn on Enable.
  3. Configure the recording schedule.
  4. Click Edit.
  5. Select a day to configure in Weekday.
  6. To set an all-day recording schedule, check All Day and select schedule Type.
  7. To set other schedules, uncheck All Day and set Start/End time and schedule Type.

LttiLNote

Up to 8 periods can be configured for each day. And the time periods cannot be overlapped with each other.

  1. Click OK to save the settings and go back to upper level menu.
  2. ¡Note

You can also select schedule type as Continuous or Event, and drag the cursor on the desired period to draw a colored bar.

  1. Click Advanced to set advanced parameters.

Record Audio

Audio will be record to the video file.

Pre-Record

The time you set to record before the scheduled time or event. For example, when an alarm triggers the recording at 10:00, and if you set the pre-record time as 5 seconds, the camera records at 9:59:55.

Post-Record

The time you set to record after the event or the scheduled time. For example, when an alarm triggered recording ends at 11:00, and if you set the post-record time as 5 seconds, it records till 11:00:05.

Stream Type

Main stream and sub-stream are selectable for recording. When you select sub-stream, you can record for a longer time with the same storage space.

Video/Picture Expired Time

The expired time is period for a recorded file to be kept in the HDD. When the deadline is reached, the file will be deleted. If you set the expired time to 0, the file will not be deleted. The actual keeping time for the file should be determined by the capacity of the HDD.

word image 1875 44

Figure 6-24 Advanced Parameters

  1. Click OK to save the advanced settings.
  2. Click Apply.
      1. Configure Recording Parameter

Steps

  1. Go to Configuration ^ Record ^ Parameter to configure camera main stream and sub-stream parameters.
  2. Configure recording parameters.

Main Stream

Main stream refers to the primary stream that affects data recorded to the hard disk drive and will directly determine your video quality and image size. Comparing with the sub­stream, the main stream provides a higher quality video with higher resolution and frame rate.

Sub-Stream

Sub-stream is a second codec that runs alongside the mainstream. It allows you to reduce the outgoing internet bandwidth without sacrificing your direct recording quality. Sub-stream is often exclusively used by smartphone applications to view live video. Users with limited internet speeds may benefit most from this setting.

Frame Rate

Frame rate refers to how many frames are captured each second. A higher frame rate is advantageous when there is movement in the video stream, as it maintains image quality throughout.

Resolution

Image resolution is a measure of how much detail a digital image can hold: the greater the resolution, the greater the level of detail. Resolution can be specified as the number of pixel­columns (width) by the number of pixel-rows (height), for example, 1024 x 768.

Bitrate

The bit rate (in Kbit/s or Mbit/s) is often referred to as speed, but actually defines the number of bits/time unit and not distance/time unit.

Enable H.264+/Enable H.265+

The H.264+/H.265+ mode helps to ensure the high video quality with a lowered bitrate. It can effectively reduce the need of bandwidth and HDD storage space.

  1. Click Apply.
      1. View Estimated Recording Period

After recording schedule and parameters are configured, the device will calculate an estimated recording period for reference.

Go to Configuration ^ Record ^ Recording Period to view the estimated recording period. You can click Configure to edit recording parameters.

      1. Storage Device

Initialize HDD

If it is the first time you use your HDD, please initialize it after it is installed.

Before You Start

Install at least an HDD to your video recorder.

Steps

  1. Go to Configuration ^ Record ^ Storage .
  2. Select an HDD.
  3. Click Init.

Repair Database

Repair an HDD that with error in database. Please operate it with the help of professional technical support.

Secure Erase

Secure erase will delete videos in the selected disk(s).

Add Network Disk

You can add the allocated NAS or IP SAN disk to the video recorder, and use it as a network HDD.

Steps

  1. Go to Configuration ^ Record ^ Storage .
  2. Click Add.
  3. Set NetHDD.
  4. Set Type as NAS or IPSAN.
  5. Enter NetHDD IP address.
  6. Click to search the available disks.

word image 1875 45

Figure 6-25 Add NetHDD

7. Select NAS disk from the list, or manually enter the directory in NetHDD Directory.

8. Click OK.

word image 1875 46

Note

Up to 8 TB storage capacity is allowed for each network disk.

Result

The added network disks will be displayed in the storage device list.

6.5.5 Configure Storage Mode

Configure HDD Groups

Multiple HDDs can be managed in groups. Video from specified channels can be recorded onto a particular HDD group through HDD settings.

Steps

C@Note

This function is only available for certain models.

  1. Go to Configuration ^ Record ^ Storage Mode .
  2. Select Mode as Group.
  3. Select a group number.
  4. Select IP cameras to record on the HDD group.

word image 1875 47

Figure 6-26 Group

  1. Click Apply.
  2. Restart the video recorder to activate the new storage mode settings.
  3. After restart, go to Configuration ^ Record ^ Storage .
  4. Click of desired HDD to set the group.
  5. Select a group number for the current HDD.
  6. Click OK.

L-LilNote

Regroup the cameras for HDD if the HDD group number is changed.

Configure HDD Quota

Each camera can be configured with an allocated quota for storing videos.

Steps

C@Note

This function is only available for certain models.

  1. Go to Configuration ^ Record ^ Storage Mode .
  2. Set Mode as Quota.
  3. Select a camera to set quota in Camera.
  4. Enter the storage capacity in Record Capacity.

word image 1875 48

Figure 6-27 Quota

‘Note

When the quota capacity is set to 0, all cameras will use the total capacity of HDD for videos and pictures.

  1. Click Apply.
  2. Restart the video recorder to activate the new settings.

6.5.6 Advanced Settings

Steps

  1. Go to Configuration ^ Record ^ Advanced .
  2. Configure the parameters as your desire.

Overwrite

  • Disable: When the HDD is full, video recorder will stop writing.
  • Enable: When hard drive is full, video record will continue to write new files by deleting the oldest files.

Enable HDD Sleeping

HDDs which are free of working for a long time will turn into sleep status.

Save Camera VCA Data

Camera VCA data will be saved so that you can search it.

Alarm Storage

When the HDD free space is not enough, you can disable it to save space, but your device will stop storing alarm information.

Picture Storage

When the HDD free space is not enough, you can disable it to save space, but your device will stop storing pictures.

H.264+/265+ for All the Analog Cameras

Enable H.264+/265+ for all the analog cameras.

6.6 RS-232 Settings

Steps

C0 Note

This function is only available for certain models.

  1. Go to Configuration ^ RS-232 .
  2. Configure RS-232 parameters, including baud rate, data bit, stop bit, parity, flow control and usage.

Console

Connect a computer to the video recorder through the computer serial port. Video recorder parameters can be configured by using software such as HyperTerminal. The serial port parameters must be the same as those of video recorder when connecting with the computer serial port.

Transparent Channel

Connect a serial device directly to the video recorder. The serial device will be controlled remotely by the computer through the network and the protocol of the serial device.

  1. Click Apply.
  2. Maintenance
    1. Restore Default

Steps

  1. Click 0 at the upper-right corner.
  2. Select the restoring type.

Simple Restore

Restore all parameters, except the network (including IP address, subnet mask, gateway, MTU, NIC working mode, default route, server port, etc.) and user account parameters, to the factory default settings.

Factory Defaults

Restore all parameters to the factory default settings.

Restore to Inactive

Restore the device to the inactive status, and leave all settings unchanged except restoring user accounts.

  1. Click Yes. The device will reboot automatically.
    1. Search Log

The operation, alarm, exception and information of video recorder can be stored in logs, which can be viewed and exported at any time.

Steps

  1. Click ® at the upper-right corner.
  2. Click More.
  3. Click Log Information.
  4. Set the search conditions.
  5. Click Search.
    1. System Service

Steps

  1. Click ® at the upper-right corner.
  2. Click More.
  3. Click System Service.
  4. Configure the parameters as your desire.

RTSP

You can specifically secure the stream data of live view by setting the RTSP authentication.

RTSP Authentication

Two authentication types are selectable, if you select digest, only the request with digest authentication can access the video stream by the RTSP protocol via the IP address. For security reasons, it is recommended to select digest as the authentication type.

ISAPI

ISAPI (Internet Server Application Programming Interface) is an open protocol based on HTTP, which can realize the communication between the system devices (e.g., network camera, NVR, etc.). The video recorder is used as a server, the system can find and connect the video recorder.

HTTP

The admin user account can disable the HTTP service from the GUI or the web browser. After the HTTP is disabled, all the related services, including ISAPI and ONVIF, will terminate as well.

HTTP Authentication

If you need to enable the HTTP service, you can set the HTTP authentication to enhance the access security. Two authentication types are selectable. For security reasons, it is recommended to select digest as the authentication type.

Camera Added Detection

The function detects the network camera status. If the network camera has been added by another video recorder, the network camera status will show as □ in Online Device list.

  1. Click Apply.
    1. Upgrade

word image 1875 49

Warning

Do not shutdown or turn off the power during upgrade.

      1. Local Upgrade

Before You Start

Store the upgrade firmware to a backup device, and connect it to your device.

Steps

  1. Click El at the upper-right corner.
  2. Click O .
  3. Click Local Upgrade.
  4. Select a backup device in Device Name.
  5. Select the upgrade firmware.
  6. Click Upgrade. Your device will reboot automatically.
      1. Online Upgrade

Upgrade the device with the latest online firmware.

Before You Start

Ensure HiLookVision is enabled and properly configured. Refer to HiLookVision for details.

Steps

  1. Click 0 at the upper-right corner.
  2. Click O .
  3. Click Online Upgrade.
  4. Download the latest firmware.

Auto Download The will automatically check and download the latest firmware.

Test Upgrade Click Test Upgrade to manually check and download the latest firmware.

  1. Upgrade your device if a new firmware version is available. The device will reboot automatically.
  2. Alarm

When events occur, you can view their details in alarm center.

    1. Set Event Hint

Select the events to hint in alarm center.

Steps

  1. Click H at the upper-right corner.
  2. Set Exception, Basic Event, or Smart Event as your desire.

word image 1875 50

Figure 8-1 Alarm Center

  1. Click ® and select events to hint.
  2. Click OK.

When the selected events occur, the alarm information will be displayed in H (locating at the upper-right corner of local menu).

    1. View Alarm in Alarm Center

Steps

  1. Click at the upper-right corner of local menu.
  2. Click Exception, Basic Event, or Smart Event to view as your desire.
  3. Web Operation
    1. Introduction

You can get access to the video recorder via web browser.

You may use one of the following listed web browsers: Internet Explorer 11.0, Apple Safari, Mozilla Firefox, and Google Chrome. The supported resolutions include 1024×768 and above.

For certain models, you will have to download a web component plug-in, and install it. Otherwise, a few functions would be unavailable. The download address is http://

hikdownload.ys7.com/web/webplugin/windows/WebComponents/standard/ WebComponents.exe .

    1. Login

You shall acknowledge that the use of the product with Internet access might be under network security risks. For avoidance of any network attacks and information leakage, please strengthen your own protection. If the product does not work properly, please contact with your dealer or the nearest service center.

Steps

  1. Open web browser, input the IP address of the video recorder and then press Enter.

C@Note

If you have changed HTTP port, enter http://IP address:HTTP port in address bar. E.g., http: 192.168.1.64:81.

  1. Enter user name and password in the login interface.
  2. Click Login.

word image 1875 51

Figure 9-1 Login

4. Follow the installation prompts to install the plug-in.

El® Note

You may have to close the web browser to finish the installation of the plug-in.

    1. Live View

After login, live view interface shows.

word image 1875 52

Figure 9-2 Live View

    1. Playback

Click Playback to enter playback interface.

word image 1875 53

Figure 9-3 Playback

    1. Configuration

Click Configuration to enter configuration interface.

word image 1875 54

Figure 9-4 Configuration

    1. Log

Steps

  1. Go to Maintenance ^ System ^ Maintenance ^ Log .
  2. Set the search conditions.
  3. Click Search.

word image 1875 55

Figure 9-5 Log

Chapter 10 Appendix

10.1 Glossary

Dual-Stream

Dual-stream is a technology used to record high resolution video locally while transmitting a lower resolution stream over the network. The two streams are generated by the DVR, with the main stream having a maximum resolution of 1080P and the sub-stream having a maximum resolution of CIF.

DVR

Acronym for Digital Video Recorder. A DVR is device that is able to accept video signals from analog cameras, compress the signal and store it on its hard drives.

HDD

Acronym for Hard Disk Drive. A storage medium which stores digitally encoded data on platters with magnetic surfaces.

DHCP

Dynamic Host Configuration Protocol (DHCP) is a network application protocol used by devices (DHCP clients) to obtain configuration information for operation in an Internet Protocol network.

HTTP

Acronym for Hypertext Transfer Protocol. A protocol to transfer hypertext request and information between servers and browsers over a network.

PPPoE

PPPoE, Point-to-Point Protocol over Ethernet, is a network protocol for encapsulating Point-to- Point Protocol (PPP) frames inside Ethernet frames. It is used mainly with ADSL services where individual users connect to the ADSL transceiver (modem) over Ethernet and in plain Metro Ethernet networks.

DDNS

Dynamic DNS is a method, protocol, or network service that provides the capability for a networked device, such as a router or computer system using the Internet Protocol Suite, to notify a domain name server to change, in real time (ad-hoc) the active DNS configuration of its configured hostnames, addresses or other information stored in DNS.

Hybrid DVR

A hybrid DVR is a combination of a DVR and NVR.

NTP

Acronym for Network Time Protocol. A protocol designed to synchronize the clocks of computers over a network.

NTSC

Acronym for National Television System Committee. NTSC is an analog television standard used in such countries as the United States and Japan. Each frame of an NTSC signal contains 525 scan lines at 60Hz.

NVR

Acronym for Network Video Recorder. An NVR can be a PC-based or embedded system used for centralized management and storage for IP cameras, IP Domes and other DVRs.

PAL

Acronym for Phase Alternating Line. PAL is also another video standard used in broadcast televisions systems in large parts of the world. PAL signal contains 625 scan lines at 50Hz.

PTZ

Acronym for Pan, Tilt, Zoom. PTZ cameras are motor driven systems that allow the camera to pan left and right, tilt up and down and zoom in and out.

USB

Acronym for Universal Serial Bus. USB is a plug-and-play serial bus standard to interface devices to a host computer.

]]> https://www.xvraid.com/guide/hilook-dvr-user-manual.html/feed 0 Alibi Recorder Firmware https://www.xvraid.com/firmware/alibi-recorder-firmware.html https://www.xvraid.com/firmware/alibi-recorder-firmware.html#respond Tue, 06 Jun 2023 15:16:32 +0000 https://www.xvraid.com/?p=1418 Alibi Recorder Firmware, The firmware version that has been loaded on your recorder is noted on the large yellow sticker on the outside of your recorder box. You need to compare this version with the latest firmware available on-line by following these instructions.

Download the Alibi Firmware Upgrade Instructions for detailed information.

All available software and firmware downloads can be found on the Alibi Downloads Page.

Alibi Recorder Firmware

AlibiVigilantLP

Read Next  :

Alibi Vigilant Network Video Recorder Firmware

Looking for firmware? Find the latest firmware downloads, release notes and firmware instructions for current and discontinued Alibi Vigilant Recorders in the following table.

NVR-B3111 Firmware for the following Alibi Vigilant recorder models.

ALI-NR320P-8
ALI-NR640P-16

Firmware Download Release Notes Release Date
B3111.31.56 Firmware B3111.31.56 Release Notes 3/16/2023
B3111.31.56 Firmware B3111.31.56 Release Notes 6/30/2022
B3111.31.56 Firmware B3111.31.56 Release Notes 6/2/2022
B3111.31.56 Firmware B3111.31.56 Release Notes 4/26/2022
B3111.31.30 Firmware B3111.31.30 Release Notes 1/17/2022
B3111.30.6 Firmware B3111.30.6 Release Notes 09/28/2021
B3111.28.36 Firmware B3111.28.36 Release Notes 04/27/2021

 

NVR-B3601 Firmware for the following Alibi Vigilant recorder models.

ALI-NR040F-1
ALI-NR080F-1
ALI-NR160F-2
ALI-NR160P-4
ALI-NR320P-4

Firmware Download Release Notes Release Date
B3601.31.56 Firmware B3601.31.56 Release Notes 03/08/2023
B3601.31.56 Firmware B3601.31.56 Release Notes 12/30/2022
B3601.31.56 Firmware B3601.31.56 Release Notes 10/31/2022
B3601.31.56 Firmware B3601.31.56 Release Notes 9/14/2022
B3601.31.56 Firmware B3601.31.56 Release Notes 8/5/2022
B3601.31.56 Firmware B3601.31.56 Release Notes 6/2/2022
B3601.31.52 Firmware B3601.31.52 Release Notes 2/21/2022
B3601.31.30 Firmware B3601.31.30 Release Notes 1/17/2022
B3601.30.6 Firmware B3601.30.6 Release Notes 09/28/2021
B3601.26.36 Firmware B3601.26.36 Release Notes 04/27/2021

 

NVR-B3613 Firmware for the following Alibi Vigilant recorder models.

ALI-NR041F-1

Firmware Download Release Notes Release Date
B3613.2.14 Firmware B3613.2.14 Release Notes 11/30/2022
B3613.2.14 Firmware B3613.2.14 Release Notes 10/26/2022

 

NVR-B3112 Firmware for the following Alibi Vigilant recorder models.

ALI-NR081F-2
ALI-NR161F-2
ALI-NR161P-4
ALI-NR321P-4

Firmware Download Release Notes Release Date
B3112.3.29 Firmware

B3112.3.29 Firmware

B3112.3.29 Firmware

B3112.2.13 Firmware

B3112.2.13 Firmware

B3112.2.13 Firmware

 B3112.3.29 Release Notes

B3112.3.29 Release Notes

B3112.3.29 Release Notes

B3112.2.13 Release Notes

B3112.2.13 Release Notes

B3112.2.13 Release Notes

 03/08/2023

12/22/2022

11/14/2022

9/26/2022

8/22/2022

6/29/2022

 

NVR-B5301 Firmware for the following Alibi Vigilant recorder models.

ALI-NR321P-8
ALI-NR640P-8

Firmware Download Release Notes Release Date
B5301.31.56 Firmware B5301.31.56 Release Notes 12/30/2022
B5301.31.56 Firmware B5301.31.56 Release Notes 11/23/2022
B5301.31.56 Firmware B5301.31.56 Release Notes 10/27/2022
B5301.31.56 Firmware B5301.31.56 Release Notes 9/14/2022
B5301.31.56 Firmware B5301.31.56 Release Notes 8/4/2022
B5301.31.56 Firmware B5301.31.56 Release Notes 6/30/2022
B5301.31.56 Firmware B5301.31.56 Release Notes 6/2/2022
B5301.31.52 Firmware B5301.31.52 Release Notes 2/21/2022
B5301.31.30 Firmware B5301.31.30 Release Notes 1/17/2022
B5301.30.6 Firmware B5301.30.6 Release Notes 09/28/2021

 

NVR-B5101 Firmware for the following Alibi Vigilant recorder models.

ALI-NR1280X-16

Firmware Download Release Notes Release Date
B5101.31.56 Firmware B5101.31.56 Release Notes 12/30/2022
B5101.31.56 Firmware B5101.31.56 Release Notes 10/31/2022
B5101.31.56 Firmware B5101.31.56 Release Notes 9/14/2022
B5101.31.56 Firmware B5101.31.56 Release Notes 8/4/2022
B5101.31.56 Firmware B5101.31.56 Release Notes 06/30/2022
B5101.31.56 Firmware B5101.31.56 Release Notes 06/2/2022
B5101.31.52 Firmware B5101.31.52 Release Notes 02/21/2022
B5101.31.30 Firmware B5101.31.30 Release Notes 01/17/2022
B5101.28.36 Firmware B5101.28.36 Release Notes 04/27/2021

 

B3506 Firmware for the following Alibi Vigilant recorder models.

ALI-HR161F-2

Firmware Download Release Notes Release Date
B3506 2.15 Firmware B3506 2.15 Release Notes 11/25/2022
B3506 2.13 Firmware B3506 2.13 Release Notes 06/02/2022
B3506 Firmware B3506 Release Notes 03/07/2022

 

B3502 Firmware for the following Alibi Vigilant recorder models.

ALI-HR160F-1

Firmware Download Release Notes Release Date
B3502.10.29 Firmware B3502.10.29 Release Notes 11/02/2022
B3502.10.28 Firmware B3502.10.28 Release Notes 06/2/2022

 

B3503 Firmware for the following Alibi Vigilant recorder models.

ALI-HR040F-1

Firmware Download Release Notes Release Date
B3503.10.29 Firmware B3503.10.29 Release Notes 11/02/2022
B3503.10.28 Firmware B3503.10.28 Release Notes 06/2/2022

 

B3519 Firmware for the following Alibi Vigilant recorder models.

ALI-HR042F-1

Firmware Download Release Notes Release Date
B3519.3.10 Firmware B3519.3.10 Release Notes 01/11/2023

 

B3503 Firmware for the following Alibi Vigilant recorder models.

ALI-HR080F-1

Firmware Download Release Notes Release Date
B3503.10.29 Firmware B3503.10.29 Release Notes 11/02/2022
B3503.10.28 Firmware B3503.10.28 Release Notes 10/25/2022
B3503.10.28 Firmware B3503.10.28 Release Notes 06/2/2022

 

B3516 Firmware for the following Alibi Vigilant recorder model.

ALI-HR081F-1

Firmware Download Release Notes Release Date
B3516.2.0 Firmware B3516.2.0 Release Notes 09/17/2022

 

B3520 Firmware for the following Alibi Vigilant recorder models.

ALI-HR082F-1

Firmware Download Release Notes Release Date
B3520.3.10 Firmware B3520.3.10 Release Notes 01/11/23

 

B3511 Firmware for the following Alibi Vigilant recorder models.

ALI-HR162F-1

Firmware Download Release Notes Release Date
B3511.10.28 Firmware B3511.10.28 Release Notes 04/26/2022

 

B3507 Firmware for the following Alibi Vigilant recorder models.

ALI-HR162F-2

Firmware Download Release Notes Release Date
B3507.3.20 Firmware B3507.3.20 Release Notes 01/11/23

B3518 Firmware for the following Alibi Vigilant recorder models.

ALI-HR163F-1

Firmware Download Release Notes Release Date
B3518.1.21 Firmware B3518.1.21 Release Notes 11/30/22

Alibi Witness Recorder Firmware and Manuals

Find the latest software for Alibi security video recorders including ACMS, firmware, power tools, Witness App and Mac and PC component downloads along with release notes and installation manuals.

ACMS Software for Alibi Recorders

Find the latest downloads for Alibi Central Management Software and installation manuals.

Alibi Witness Mobile App

Check out our page for the most current information on the Alibi Witness Mobile App.

Windows Codec Pack

colgroup>

File Name File Size File Type
Windows Codec Pack 8769 KB ZIP

Mac Web Components

colgroup>

File Name File Size File Type
Mac Web Components 2933 KB ZIP

Alibi Power Tools

colgroup>

File Name File Size File Type
Alibi Configuration Tool for Windows

Alibi Configuration Tool for Mac

The Alibi Configuration Tool searches for active Alibi devices on a local area network. Once discovered, online devices within your subnet will display network information, mac addresses, and firmware versions . This software can be used to configure key device parameters such as network settings, editing passwords, restoring default settings, and batch firmware upgrading.

 61836 KB

18697 KB

 ZIP

ZIP
Alibi Discovery Tool for Windows

Alibi Discovery Tool for Mac

The Alibi Discovery Tool searches for active Alibi devices on a local area network. Once discovered, online devices within your subnet will display network information, mac addresses, and firmware versions . This software can be used to configure key device parameters such as network settings and editing passwords.

 32107 KB

17411 KB

 ZIP

ZIP
Alibi Storage Calculator for Windows

Alibi Storage Calculator for Mac

Users can calculate HDD space / storage time and network bandwidth according to different camera channel counts, resolutions, codecs, and bit rate settings.

 19808 KB

20559 KB

 ZIP

ZIP
Local Playback

The Local Playback Tool allows the user to search the file structure of Alibi-initialized HDDs or micro SD cards. It enables searching of video by date and time, similar to the way NVRs or DVRs and software search. Alibi has a proprietary formatting and initialization process used to store video data on HDDs. This tool allows the user to search by date and time and not by file names, making it easier to locate specific video events.

 48678 KB ZIP
Remote Backup

The Remote Backup Tool allows to create a video archive from one or multiple devices through a network connection using a dedicated Windows PC. A user can configure the size of storage space using the Windows PC architecture and processes. A schedule can be created to back up video files at specific times to optimize for network traffic or a manual back up can be initiated at any time.

 21353 KB ZIP
VS Player

Media Player for video streams and export video files from Alibi products. Support fisheye expansion, digital zooming, merging files, format converting, and media streaming.

 40738 KB ZIP
VS Player for Mac

Mac Media Player for video streams and export video files from Alibi products. Support fisheye expansion, digital zooming, merging files, format converting, and media streaming.

 2.62 MB ZIP

Alibi 3004 Digital Video Recorder

Includes SKUs – ALI-DVR3004H, ALI-DVR3008H, ALI-DVR3016H

colgroup>

File Name File Size File Type Release Date
ALI-DVR3008H/16H Firmware V2.2.10 Build 141211 204733 KB ZIP 12/11/14

Alibi 1004 Digital Video Recorder

Includes SKUs – ALI-DVR1004E

colgroup>

File Name File Size File Type Release Date
Firmware V2.2.12 Build 150416 6969 KB ZIP 04/16/15

Alibi Hybrid Series Video Recorder

Includes SKUs – ALI-HVR3004H, ALI-HVR3008H, ALI-HVR3016H, ALI-HVR5016H, ALI-TVR7032H

colgroup>

File Name File Size File Type Release Date
ALI-TVR7032R Firmware V3.3.2 Build 170304 14563 KB ZIP 03/4/17
ALI-TVR7032R V3.3.2 Build 170304 Release Notes 350 KB PDF 03/4/17
Firmware V3.3.2 Build 160719 26474 KB ZIP 07/19/16
Release Notes V3.3.2 Build 160719 164 KB DOCX 07/19/16
Firmware V3.3.2 Build 151204 52756 KB ZIP 12/04/15
Release Notes V3.3.2 Build 151204 18 KB DOCX 12/04/15
Firmware V3.1.3 Build 150624 49069 KB ZIP 06/24/15
Firmware V3.0.4 Build 141216 13442 KB ZIP 12/16/14
Product Manual V3.0.4 116 KB PDF 12/16/14

Alibi 3000 Series Network Video Recorders

Includes SKUs – ALI-NVR3004P, ALI-NVR3008P

colgroup>

File Name File Size File Type Release Date
Firmware V2.2.3 Build 170719 12600 KB ZIP 07/19/17
Release Notes V2.2.3 Build 170719 336 KB PDF 07/19/17
Firmware V2.2.3 Build 160816 12988 KB ZIP 08/16/16
Release NotesV2.2.3 Build 160816 205 KB PDF 08/16/16
Firmware V2.2.3 Build 151118 12984 KB ZIP 11/18/15
Firmware V2.2.3 Build 150624 12991 KB ZIP 06/24/15
Firmware V2.2.3 Build 141208 13317 KB ZIP 12/08/14

Alibi 3100 Series Network Video Recorders

Includes SKUs – ALI-NVR3104P, ALI-NVR3108P

colgroup>

File Name File Size File Type Release Date
Firmware V3.3.4 Build 160720 13743 KB ZIP 07/20/16
Release Notes V3.3.4 Build 160720 164 KB DOCX 07/20/16
Firmware V3.3.4 Build 160323 13743 KB ZIP 03/23/16
Firmware V3.3.4 Build 151127 14315 KB ZIP 11/27/15
Product Manual V3.3.4 8573 KB PDF 01/06/16
Release Notes V3.3.4 Build 151127 204 KB PDF 11/27/15

Alibi 3304 Network Video Recorders

Includes SKUs – ALI-NVR3304P

colgroup>

File Name File Size File Type Release Date
Firmware V3.4.98 22666 KB ZIP 02/28/18
V3.4.98 Release Notes 354 KB PDF 02/28/18
Firmware V3.4.95 24700 KB ZIP 11/07/17
V3.4.95 Release Notes 346 KB PDF 11/07/17
V3.4.95 Manual 16817 KB PDF 11/07/17
Firmware V3.4.9 Build 170228 24197 KB ZIP 02/28/17
V3.4.9 Build 170228 Release Notes 354 KB PDF 02/28/17
V3.4.90 Build 170228 Manual 16406 KB PDF 02/28/17
Firmware V3.4.6 Build 160913 19905 KB ZIP 09/13/16
V3.4.6 Build 160913 Release Notes 205 KB PDF 09/13/16
Firmware V3.4.6 Build 160606 19830 KB ZIP 06/16/16
V3.4.6 Build 160606 Release Notes 164 KB DOCX 06/16/16
Product Manual V3.4.6 12990 KB PDF 06/16/16

Alibi 3308, 3316 Network Video Recorders

Includes SKUs – ALI-NVR3308P, ALI-NVR3316P

colgroup>

File Name File Size File Type Release Date
Firmware V4.30.005 Build 210305IMPORTANT: NVR must have firmware version V4.21.005 or higher installed to support SmartSense cameras. You MUST update to V4.1.50_181213 before upgrading to this version. 50.2 MB ZIP 4/27/21
V4.30.005 Release Notes 548 KB PDF 4/27/21
V4.30.005 Manual 7.51 MB PDF 4/27/21
Firmware V4.21.005 Build 201016IMPORTANT: NVR must have firmware version V4.21.005 or higher installed to support SmartSense cameras. You MUST update to V4.1.50_181213 before upgrading to this version. 50.8 MB ZIP 10/21/20
V4.21.005 Release Notes 539 KB PDF 10/21/20
Firmware V4.21.005IMPORTANT: NVR must have firmware version V4.21.005 or higher installed to support SmartSense cameras. You MUST update to V4.1.50_181213 before upgrading to this version. 48.6 MB ZIP 6/19/20
V4.21.005 Release Notes 122 KB PDF 6/19/20
V4.21.005 Manual 12640 KB PDF 11/22/19
Firmware V4.1.50IMPORTANT: Before updating, ensure the admin password has been changed from the default password supported in previous revisions and is at least 8 characters. 49214 KB ZIP 12/13/18
V4.1.50 Release Notes 424 KB PDF 12/13/18
V4.1.50 Manual 10179 KB PDF 11/09/18
Firmware V3.4.98 38113 KB ZIP 02/28/18
V3.4.98 Release Notes 354 KB PDF 02/28/18
Firmware V3.4.95 24700 KB ZIP 11/07/17
V3.4.95 Release Notes 346 KB PDF 11/07/17
V3.4.95 Manual 16817 KB PDF 11/07/17
Firmware V3.4.90 Build 170531 39405 KB ZIP 05/31/17
V3.4.90 Build 170531 Release Notes 340 KB PDF 05/31/17
Firmware V3.4.90 Build 170228 39396 KB ZIP 02/28/17
V3.4.90 Build 170228 Release Notes 176 KB PDF 02/28/17
V3.4.90 Build 170228 Manual 16406 KB PDF 02/28/17
Firmware V3.4.6 Build 160913 36962 KB ZIP 09/13/16
V3.4.6 Build 160913 Release Notes 204 KB PDF 09/13/16
Firmware V3.4.6 Build 160606 19830 KB ZIP 06/16/16
V3.4.6 Build 160606 Release Notes 164 KB DOCX 06/16/16
Product Manual V3.4.6 25538 KB PDF 06/16/16

Alibi 5000 & 7000 Series Network Video Recorders

Includes SKUs – ALI-NVR5016P, ALI-NVR5032P, ALI-NVR5116P, ALI-NVR5132P, ALI-NVR7032R

colgroup>

File Name File Size File Type Release Date
Firmware V3.3.4 Build 160719 22395 KB ZIP 07/19/16
Release Notes V3.3.4 Build 160719 164 KB DOCX 07/19/16
Firmware V3.3.4 Build 160427 22482 KB ZIP 04/27/16
Release Notes V3.3.4 Build 160427 203 KB PDF 04/27/16
No Resources fix explanation 361 KB PDF 04/27/16
7000 Series Firmware V3.3.4 Build 160323 22395 KB ZIP 03/23/16
Firmware V3.3.4 Build 151215 45622 KB ZIP 12/15/15
Product Manual V3.3.4 8573 KB PDF 01/06/16
Release Notes V3.3.4 Build 151215 202 KB PDF 12/15/15
Firmware V3.3.4 Build 151118 45715 KB ZIP 11/18/15
Release Notes V3.3.4 Build 151118 164 KB DOCX 11/18/15
Firmware V3.3.4 Build 151118 45715 KB ZIP 11/18/15
Product Manual V3.3.4 25615 KB PDF 01/06/16
Release Notes V3.3.4 Build 151118 164 KB DOCX 11/18/15
Firmware V3.1.1 Build 141221 19749 KB ZIP 12/21/14
Firmware V3.1.1 Build 150914 19410 KB ZIP 09/14/15
Firmware V3.1.1 Build 140710 19295 KB ZIP 07/10/14
Release Notes V3.1.1 Build 140710 34 KB PDF 07/10/14

Alibi 3404 Network Video Recorder

Includes SKUs – ALI-NVR3404P

colgroup>

File Name File Size File Type Release Date
Firmware V4.30.005 Build 210305 29.4 MB ZIP 4/27/21
V4.30.005 Release Notes 523 KB PDF 4/27/21

Alibi 5X & 7X Series Network Video Recorders

Includes SKUs – ALI-NVR5216P, ALI-NVR5232P, ALI-NVR5316P, ALI-NVR5332P, ALI-NVR7132R, ALI-NVR7164R, ALI-NVR7232R

colgroup>

File Name File Size File Type Release Date
Firmware V4.50 Build 210607IMPORTANT: NVR must have firmware version V4.21.005 or higher installed to support SmartSense cameras. You MUST update to 4.21.005_210305 before upgrading to this version 50.6 MB ZIP 07/02/21
V4.50 Build 210607 Manual 13.1 MB PDF 08/18/21
V4.50 Build 210607 Release Notes 600 KB PDF 07/02/21
Firmware V4.21.005 Build 210305IMPORTANT: NVR must have firmware version V4.21.005 or higher installed to support SmartSense cameras. You MUST update to V4.1.50_181213 before upgrading to this version. 48.8 MB ZIP 03/05/21
V4.21.005 Release Notes 308 KB DOCX 03/05/21
Firmware V4.21.005 Build 201016IMPORTANT: NVR must have firmware version V4.21.005 or higher installed to support SmartSense cameras. You MUST update to V4.1.50_181213 before upgrading to this version. 50.8 MB ZIP 10/21/20
V4.21.005 Release Notes 539 KB PDF 10/21/20
Firmware V4.21.005IMPORTANT: NVR must have firmware version V4.21.005 or higher installed to support SmartSense cameras. You MUST update to V4.1.50_181213 before upgrading to this version. 48.6 MB ZIP 6/19/20
V4.21.005 Release Notes 122 KB PDF 6/19/20
Firmware V4.1.50IMPORTANT: Before updating, ensure the admin password has been changed from the default password supported in previous revisions and is at least 8 characters. 49214 KB ZIP 12/13/18
V4.1.50 Release Notes 424 KB PDF 12/13/18
V4.1.50 Manual 10179 KB PDF 11/09/18
Firmware V3.4.98 38113 KB ZIP 02/28/18
V3.4.98 Release Notes 354 KB PDF 02/28/18
Firmware V3.4.95 24700 KB ZIP 11/07/17
V3.4.95 Release Notes 346 KB PDF 11/07/17
V3.4.95 Manual 16817 KB PDF 11/07/17
Firmware V3.4.90 Build 170531 39405 KB ZIP 05/31/17
V3.4.90 Build 170531 Release Notes 340 KB PDF 05/31/17
Firmware V3.4.90 Build 170228 39396 KB ZIP 02/28/17
V3.4.90 Build 170228 Release Notes 176 KB PDF 02/28/17
V3.4.90 Build 170228 Manual 16406 KB PDF 02/28/17
Firmware V3.4.70 Build 160825 37478 KB ZIP 08/25/16
V3.4.70 Build 160825 Release Notes 207 KB PDF 08/25/16
Product Manual V3.4.70 15161 KB PDF 09/29/16
Firmware V3.4.70 Build 160630 37398 KB ZIP 06/30/16
V3.4.70 Build 160630 Release Notes 164 KB DOCX 06/30/16
Firmware V3.3.7 52004 KB ZIP 04/25/16
Release Notes V3.3.7 203 KB PDF 04/25/16
Product Manual V3.3.7 14442 KB PDF 04/25/16

Alibi 7100 Series 128-Channel NVR with RAID

SKUs – ALI-NVR71128R

colgroup>

File Name File Size File Type Release Date
Firmware V4.1.66IMPORTANT: NVR must have firmware version V4.1.63 or higher installed to support SmartSense cameras. 75.1 MB ZIP 5/6/20
V4.1.66 Release Notes 196KB PDF 5/6/20
Firmware V4.1.63IMPORTANT: NVR must have firmware version V4.1.63 or higher installed to support SmartSense cameras. 82.5 MB ZIP 10/7/19
V4.1.63 User Manual 11.9 MB PDF 11/6/20
V4.1.63 Release Notes 56 KB PDF 10/7/19
Firmware Manual v3.6.22 14887 KB PDF 03/27/18

Alibi QVRs

SKUs – ALI-QVR3004H, ALI-QVR3008H, ALI-QVR3016H

colgroup>

File Name File Size File Type Release Date
Firmware v3.4.80 Build 170302 40402 KB ZIP 03/02/17
Firmware v3.4.80 Build 170302 Release Notes 359 KB PDF 03/02/17
Product Manual V3.4.80 15010 KB PDF 03/02/17
Firmware v3.4.7 Build 160926 14500 KB ZIP 09/26/2016
Firmware v3.4.7 Release Notes 209 KB PDF 09/26/2016
Product Manual V3.4 13542 KB PDF 09/26/2016

SKUs – ALI-QVR3104, ALI-QVR3108, ALI-QVR4104

colgroup>

File Name File Size File Type Release Date
Firmware V4.20.000 200110IMPORTANT: Do not use Alibi Config Tool to upgrade firmware. Please perform upgrade using USB flash drive or web browser only. 45.9 MB ZIP 01/09/20
Manual V4.20.000 200110 11.3 MB PDF 02/10/20
Release Notes V4.20.000 200110 106 KB PDF 01/09/20
Firmware v3.5.37 Build 181227 43721 KB ZIP 12/7/18
Firmware Manual v3.5.37 12.3 MB PDF 4/30/2019
Firmware v3.5.37 Build 181227 Release Notes 62 KB PDF 12/7/18
Firmware v3.5.31 Build 180109 15290 KB ZIP 01/09/18
Firmware v3.5.37 Build 181227 43721 KB ZIP 12/7/18
Firmware v3.5.37 Build 181227 Release Notes 62 KB PDF 12/7/18
Firmware v3.5.31 Build 180109 Release Notes 62 KB PDF 01/09/18

SKU – ALI-QVR4008H

colgroup>

File Name File Size File Type Release Date
Firmware v3.4.80 Build 170302 40402 KB ZIP 03/02/17
Firmware v3.4.80 Build 170302 Release Notes 359 KB PDF 03/02/17
Product Manual V3.4.80 15010 KB PDF 03/02/17
Firmware V3.4.4 81301 KB ZIP 06/24/2016
Firmware V3.4.4 Release Notes 164 KB DOCX 06/24/2016
Product Manual V3.4 32548 KB PDF 06/03/2016

SKU – ALI-QVR4016H

colgroup>

File Name File Size File Type Release Date
Firmware v3.4.80 Build 170302 40402 KB ZIP 03/02/17
Firmware v3.4.80 Build 170302 Release Notes 359 KB PDF 03/02/17
Product Manual V3.4.80 15010 KB PDF 03/02/17
Firmware V3.4.5 160628 14684 KB ZIP 06/28/2016
Release Notes V3.4.5 160628 206 KB PDF 06/28/2016
Firmware V3.4.5 160601 14684 KB ZIP 06/01/2016
Release Notes V3.4.5 160601 206 KB PDF 06/01/2016
Product Manual V3.4 13542 KB PDF 06/03/2016

SKUs – – ALI-QVR3116, ALI-QVR4108, ALI-QVR4116

colgroup>

File Name File Size File Type Release Date
Firmware V4.20.000 200110IMPORTANT: Do not use Alibi Config Tool to upgrade firmware. Please perform upgrade using USB flash drive or web browser only. 45.9 MB ZIP 01/09/20
Manual V4.20.000 200110 11.3 MB PDF 02/10/20
Release Notes V4.20.000 200110 106 KB PDF 01/09/20
Firmware v3.5.37 Build 181227 43721 KB ZIP 12/7/18
Firmware Manual v3.5.37 12.3 MB PDF 4/30/2019
Firmware v3.5.37 Build 181227 Release Notes 62 KB PDF 12/7/18
Firmware v3.5.31 Build 180109 17044 KB ZIP 01/09/18
Firmware v3.5.31 Build 180109 Release Notes 62 KB PDF 01/09/18

SKU – ALI-QVR3204

colgroup>

File Name File Size File Type Release Date
Firmware V4.21.002 Build 210304IMPORTANT: NVR must have firmware version V4.21.005 or higher installed to support SmartSense cameras. You MUST update to V4.1.50_181213 before upgrading to this version. 48.8 MB ZIP 03/05/21
V4.21.002 Release Notes 307 KB DOCX 03/04/21
Firmware V4.21 User Manual 11.2 MB PDF 12/3/20

SKU – ALI-QVR3208, ALI-QVR4204H

colgroup>

File Name File Size File Type Release Date
Firmware V4.21.002 Build 210304IMPORTANT: NVR must have firmware version V4.21.005 or higher installed to support SmartSense cameras. You MUST update to V4.1.50_181213 before upgrading to this version. 14.3 MB ZIP 03/05/21
V4.21.002 Release Notes 307 KB DOCX 03/04/21
Firmware V4.21 User Manual 11.2 MB PDF 12/3/20

SKU – ALI-QVR3216H, ALI-QVR4208H, ALI-QVR4216H

colgroup>

File Name File Size File Type Release Date
Firmware V4.21.002 Build 210304IMPORTANT: NVR must have firmware version V4.21.005 or higher installed to support SmartSense cameras. You MUST update to V4.1.50_181213 before upgrading to this version. 19 MB ZIP 03/05/21
V4.21.002 Release Notes 307 KB DOCX 03/04/21
Firmware V4.21 User Manual 11.2 MB PDF 12/3/20

SKU – ALI-QVR5016H

colgroup>

File Name File Size File Type Release Date
Firmware V3.4.80 170302 32559 KB ZIP 03/02/17
Release Notes V3.4.80 170302 358 KB PDF 03/02/17
Product Manual V3.4.80 15010 KB PDF 03/02/17
Firmware V3.4.6 160711 30564 KB ZIP 07/11/2016
Release Notes V3.4.6 160711 203 KB PDF 07/11/2016
Product Manual V3.4 13542 KB PDF 09/26/2016

Alibi QVR5116H Network Video Recorder

Includes SKUs – ALI-QVR5116H

colgroup>

File Name File Size File Type Release Date
Firmware V4.20.000 200110IMPORTANT: Do not use Alibi Config Tool to upgrade firmware. Please perform upgrade using USB flash drive or web browser only. 31.9 MB ZIP 01/09/20
Manual V4.20.000 200110 12.7 MB PDF 02/10/20
Release Notes V4.20.000 200110 106 KB PDF 01/09/20
Firmware V3.5.37 181107 32865 KB ZIP 02/04/19
Release Notes V3.5.37 181107 577 KB PDF 02/04/19

Alibi QVR5132H Network Video Recorder

Includes SKUs – ALI-QVR5132H

colgroup>

File Name File Size File Type Release Date
Firmware V4.20.000 200110IMPORTANT: Do not use Alibi Config Tool to upgrade firmware. Please perform upgrade using USB flash drive or web browser only. 32.7 MB ZIP 01/09/20
Manual V4.20.000 200110 11.3 MB PDF 02/10/20
Release Notes V4.20.000 200110 106 KB PDF 01/09/20
Firmware V3.5.50 181124 34228 KB ZIP 02/04/19
Release Notes V3.5.50 181124 582 KB PDF 02/04/19
]]> https://www.xvraid.com/firmware/alibi-recorder-firmware.html/feed 0 Hikvision AX PRO Configuration Full Setup – Video https://www.xvraid.com/guide/hikvision-ax-pro-configuration-full-setup-video.html https://www.xvraid.com/guide/hikvision-ax-pro-configuration-full-setup-video.html#respond Tue, 25 Apr 2023 14:54:49 +0000 https://www.xvraid.com/?p=1343 Hikvision AX PRO Configuration Full Setup – Video When you are away from your home or business, see what’s happening around immediately with your own eyes can bring real assurance.

Meet the AX PRO Wireless Alarm System

mediaIamge

When you are away from your home or business, see what’s happening around immediately with your own eyes can bring real assurance. That’s why you need AX PRO – a flexible and easy-to-use system with no wires. Featuring precise detections and comprehensive protection, it is an ideal choice for villas, offices, shops and more.

Read Next :

Hikvision AX PRO Unboxing and Configuration Video – Full Setup Video

Hikvision AX Pro – How to configure wireless keypad DS PKA WLM

Hikvision AX Pro – How to configure wireless keypad DS PKA WLM

Hikvision AX PRO How to Invite Owner From Hik Proconnect

Hikvision AX PRO How to Invite Owner From Hik Proconnect (installer software)

How to Add Tag in AX PRO Wireless Control Panel

SW_DS-PWA How to Add Tag in AX PRO Wireless Control PanelDownload

How to Add Wireless Detector to AX PRO Wireless Control Panel

How to Add Wireless Detector to AX PRO Wireless Control Panel
SW_DS-PWA-How-to-Add-Wireless-Detector-to-AX-PRO-Wireless-Control-PanelDownload

How to Configure Automation Device in AX PRO Wireless Control Panel

How to Configure Automation Device in AX PRO Wireless Control Panel

SW_DS-PWA-How-to-Configure-Automation-Device-in-AX-PRO-Wireless-Control-PanelDownload

How to Configure Wireless Repeater in AX PRO Wireless Control Panel

How to Configure Wireless Repeater
in AX PRO Wireless Control Panel

SW_DS-PWA-How-to-Configure-Repeater-in-AX-PRO-Wireless-Control-PanelDownload

How to Configure Wireless Keypad in AX PRO Wireless Control Panel

How to Configure Wireless Keypad
in AX PRO Wireless Control Panel

SW_DS-PWA-How-to-Configure-Wireless-Keypad-in-AX-PRO-Wireless-Control-PanelDownload

How to Reset AX PRO Panel by Reset Button

How to Reset AX PRO Panel by Reset Button

SW_DS-PWA-How-to-Rest-AX-PRO-Panel-by-Reset-ButtonDownload

How to Login AX PRO Wireless Control Panel by Browser

How to Login AX PRO Wireless Control Panel by Browser

SW_DS-PWA-How-to-login-AX-PRO-Wireless-Control-Panel-by-BrowserDownload

How to Upgrade AX PRO Wireless Control Panel by Browser (HPC Management)

How to Upgrade AX PRO Wireless Control Panel by Browser
(HPC Management)

SW_DS-PWA-How-to-Upgrade-AX-PRO-Wireless-Control-Panel-by-Browser-HPC-ManagementDownload

How to Unbind AX PRO Panel Hik-Connect

How to Unbind AX PRO Panel Hik-Connect

SW-DS-PWA-How-to-Unbind-AX-PRO-Panel-Hik-connectDownload

How to choose devices for the Hikvision AX Pro

Below is a quick guide to the most common sensors for the Hikvision AX Pro Alarm System

Below is a guide of the Sounders and Panic buttons

How to get verification code from AX Pro when adding via Wifi

How to Get Verification Code of AX PRO

Hikvision Hybrid PRO Panel Wiring and Web Configuration

Hikvision-Hybrid-PRO-Panel-Wiring-and-Web-ConfigurationDownload

How do I install my Hikvision Ax Pro alarm?

How does the Hikvision AX-PRO alarm center work? and how to install it?

The wireless alarm Hikvision AX-PRO is a professional security system whose strong points are the simplicity of installation and use, as well as a compact and attractive design.

Behind this apparent simplicity, an innovative radio technology allows this wireless alarm to benefit from an exceptional radio range and a high level of encryption for infallible protection in the event of a jamming attempt.

THE HUB includes as standard an IP module with wired RJ45 and Wi-Fi connections, a GSM module compatible with 3G and 4G LTE network (2.5G for the AX-PRO 64 model) with dual SIM card slot for the AX-PRO 96 model, which allows it to benefit from absolute security in the transmission of alerts

He can be managed or programmed with the Hik-Connect application to benefit from a simplified installation accessible to all.

The possibility of associating detectors with shooting, coupled with the integration and interaction with the ranges of Hikvision cameras, makes the AX-PRO system an innovative and complete product in order to perfectly secure all types of environment, house, apartment, business or office.

The Hikvision AX PRO alarm, a security system perfectly suited to professional and residential environments:

The alarm center Hikvision AX PRO is a “top-of-the-range” system offering an IP, Wi-Fi or GSM connection as standard for highly secure remote management using the Hik-Connect smartphone application.

The richness of its functionalities and characteristics make it possible to meet the requirements of both complex and professional installations.

But also for the protection of residences, apartments or all surfaces of medium or large areas, with the possibility of adding radio range repeaters in order to extend the communication area between the HUB and the peripherals.

Combined with a resolutely modern, attractive and discreet design, the AX-PRO unit will find its place in all types of environments.

The power plant Hikvision AX PRO contrasts sharply with the old generation alarm product ranges, in a word, the product is “beautiful” and we can install this equipment without having to hide it.

We immediately feel that this product has been designed with care in order to fit perfectly into all types of interiors, apartment, old or modern house, office or business… the design as well as the size have been perfectly thought out so that the product gets forgotten.

Technical characteristics of the Hikvision AX-PRO control unit

AX PRO Central supports Wi-Fi, TCP/IP and GPRS/3G/4G communication methods. It also supports ISAPI, Hik-Connect and DC-09, which applies to market, store, home, factory, warehouse, office, etc. scenarios.

main Features

  • TCP/IP, Wi-Fi and GPRS/3G/4G networks
  • Next Generation Wireless Protocol: Tri-X
  • Long RF transmission distance
  • Bi-directional communication with AES-128 encryption
  • Connects up to 96 wireless zones/outputs, 48 ​​wireless keyfobs, 4 repeaters, 6 sirens, 8 badge readers and keypads andPIRCAM.
    Capacity varies by device model.
  • Supports up to 48 network users, including 1 installer, 1 administrator and 46 normal users
  • Voice alert
  • Configuration via client web interface, mobile app and cloud
  • The configuration of Hik-Connect and Hik-ProConnect depends on the access level of the user
  • Alarm notification via messages or phone calls
  • Watching videos in real time on Hik-Connect
  • Alarm video clips via emails and app
  • Upload alarm reports to ARC
  • Support LED indicator to indicate system status
  • 4520 mAh lithium backup battery
  • SIA-DC09 protocol, and supports Contact ID and SIA data formats

How to install your Ax Pro

Simple and intuitive configuration! configure your control unit in 4 steps the application with Hik-Connect!

The app Hik Connect has been designed to easily and efficiently configure all the security devices installed in residential or professional sites from a smartphone or tablet.

The video below shows you the different steps for installing and configuring your AX PRO alarm system

Step 1 :First, make sure your hub is powered on and connected to the network.

2nd step : Then go to HIK-ProConnect.

Create an account or sign in to an existing account.

Then choose from the Site menu.

Create a new site or add to an existing site.

If you need to create a new site, fill in all the information requested:

  • name of the site
  • Time zone
  • Site type. Example: factory, house etc.
  • Site address

Step 3 : Once the site information has been entered:
Choose add device at the bottom of the page – Scan the QR code on the back of the hub (AX Pro panel) to
Add this device to HIK-ProConnect and associate it with the particular site.

Step 4 : Simply tap on the Hub image and the menu below will appear and display three sub-menus:

1-Partition

2-Device

3-State
In the first sub-menu called “Partition”, it is possible to:
To arm in away mode
To arm in presence mode
to disarm
To control the silent alarm

Step 5: Add devices
In the second sub-menu called “device”:
Go to the bottom of the window (+ symbol) at the bottom of the menu and press the +

Scan the QR code on the back of the device door contact example.

It will then ask the installer to power up
switch inside the device (located by removing the cover of the device). Once lit
the device will be added to the system.

Then simply name and save.

English Installation Manual

An effective removal of doubt thanks to HIKVISION’s IVaas technology!

There are several possibilities offered by the AX-PRO range to manage Hikvision video surveillance cameras connected to the same network as the AX-PRO central unit:

  • on the AX-PRO 64 and 96 ranges , the video streams can be linked to one or more detectors so that a direct reading is associated with the detector concerned by an alert event; thus, in the notification received following this alert, a link to read the camera concerned will make it possible to quickly remove doubts remotely.
  • on the AX-PRO 96 range , it is possible to record 4 video streams directly on the control unit; this is the IVass technology, the operating principle of which is as follows:

WHAT IS IVaaS TECHNOLOGY?

Hikvision’s IVaaS technology connects CCTV cameras and usually independent alarm center into a single platform, sending a 7-second video clip via email or app when an alarm occurs for quick confirmation and effective removal of doubt. The technology makes it possible to extract video streams from 4 cameras directly from the AX-PRO 96 HUB.

WHAT ARE THE ADVANTAGES ?

Traditional intruder alarm systems do not have a quality verification process. Alarms can be triggered by causes other than intruders; Responding to these false alarms wastes time and stress for owners. Through an innovative verification process, Hikvision’s IVaaS technology removes any doubts to determine what really caused an intrusion.

Additionally, many alarm verification solutions on the market rely on static images or poor quality video feeds to confirm alarms; these provide few details where necessary. Hikvision’s IVaaS technology provides high-quality video clips as real evidence, making it easier to apprehend an intruder and recover losses from insurance.

Another significant benefit is that intruders tend to damage cameras and detection equipment to disable CCTV and alarm systems, eliminating any available evidence. By installing the AX-PRO HUB coupled with Hikvision’s IVaaS technology in a discreet and secure location, the risk of vandalism is circumvented. Even if the intruder damages the intrusion detector, the camera or the mains power supply, a video clip will be streamed and stored securely on the AX-PRO HUB; your evidence is thus effectively preserved.

Compose your AX-PRO kit in a few clicks!

To compose or complete your kit, select your products and your options in our configurator… you can then finalize your order and take advantage of our exclusive services…

The certifications of the Hikvision AX-PRO wireless alarm:

When technology is responsible for people’s assets, as well as their lives, it must be as reliable as possible; it would therefore be irresponsible to rely solely on the characteristics declared by the manufacturer, which implies that a qualified and independent examination is necessary; in the European security market, the security standard is EN 50131.

Accredited laboratories subject safety equipment to certain tests: on their functionality, their resistance to bad weather, their resistance to mechanical disturbances and to external electromagnetic fields. The quality of radio communication is tested, as well as the external operation of the device. The test results are recorded and examined by the certification body, which decides on and possibly awards the certification and its “Grade” level.

What is the difference between the different levels called “Grade”?

The higher the level, the stronger the security system. Two caveats are in order: Level 4 is rare in consumer systems, as the standard requirements are extremely high, and Level 3 can only be assigned to wired alarm systems. Thus, manufacturers of wireless alarm systems can be assigned a grade 1 or 2.

Here is the particularity of each “Grade” level:

Grade 1. The system can withstand inexperienced attackers. It protects the most obvious entry points, for example the front door. It is suitable for spaces exposed to a minimal risk of theft and not containing valuables.

Grade 2. The system can withstand experienced attackers with special equipment. It protects doors, windows and other possible entry points. It is suitable for an apartment, a house or an office.

Grade 3. The system can resist intruders with professional skills and knowledge using portable electronic equipment. All possible entry points are protected, as well as walls and ceilings. It is suitable for large commercial installations, such as shopping malls.

Grade 4. The system can withstand groups of professionals who plan attacks in advance and are equipped with a range of equipment. This is suitable for objects with the greatest risk of theft or terrorist attack.

Hikvision has obtained the “Grade 2” level!

All devices have been tested under extreme temperature and humidity conditions.

Detectors, sirens and control units have been tested against vibrations, electrostatic and magnetic fields.

Attempts have been made to open the devices and tear them from their holders to check the effectiveness of the tamper protection.

The AX-PRO powerhouse has received the most attention, as it coordinates the rest of the peripherals.

The speed with which it sends commands to the detectors has been verified as well as the correct display of the status of the devices.

Switching from normal power to battery backup has been verified.

Both communication channels, Ethernet and GSM (GPRS), have been checked to ensure backup is quickly activated if the primary channel is cut.

“Two-way” communication technology was also tested.

The antennas as well as the strength of the radio signal were tested as well as the ability of the system to resist jamming and to find a free frequency in the event of radio interference.

After several months of testing, Hikvision security devices have all been EN-50131 grade 2 certified.

]]> https://www.xvraid.com/guide/hikvision-ax-pro-configuration-full-setup-video.html/feed 0 Hikvision AX PRO Unboxing and Configuration Video - Full Setup Video nonadult Vivotek firmware DVR NVR IPC Software download https://www.xvraid.com/firmware/vivotek-firmware-dvr-nvr-ipc-software-download.html https://www.xvraid.com/firmware/vivotek-firmware-dvr-nvr-ipc-software-download.html#respond Mon, 13 Mar 2023 19:10:06 +0000 https://www.xvraid.com/?p=1302 Vivotek firmware DVR NVR IPC Software download We are with you with our guide where you can find software and firmware files of all devices belonging to Vivotek company . vivotek company is one of the giant brands of the company in the global sense with its DVR NVR IPC AHD TVI XVI and Hybrid devices .

Vivotek firmware DVR NVR IPC Software download

Read Next : How to upgrade vivotek camera?

AB5156

AB5156

Firmware0202a / 2016.03   Datasheet
AB5166

AB5166

Firmware0200e / 2016.09   All Files ➤
AB5353H

AB5353H

Firmware0204c / 2014   Datasheet
AB5376

AB5376

Firmware0101b / 2016.03   Datasheet
AB5376 to

AB5376 to

Firmware0200e / 2016.09   All Files ➤
AB5396

AB5396

Firmware0102a / 2016.03   Datasheet
AB5396 to

AB5396 to

Firmware0200e / 2016.09   All Files ➤
AB6117-HP

AB6117-HP

Firmware0101f / 2016.11   All Files ➤
AB6317-HT

AB6317-HT

Firmware0101f / 2016.11   All Files ➤
the AD5166

the AD5166

Firmware0200e / 2016.09
AD5196

AD5196

Firmware0102a / 2016.03   Datasheet
the AD5196

the AD5196

Firmware0200e / 2016.09   All Files ➤
AF5108

AF5108

Firmware0200b / 2016.11
AF5127

AF5127

Firmware0102b / 2014   Datasheet
AF5147

AF5147

Firmware0102g / 2014
AF5147V

AF5147V

Firmware0200f / 2016.03   Datasheet
AS5336 to

AS5336 to

Firmware0203d / 2016.03   Datasheet
AS6316-EHL

AS6316-EHL

Firmware0101h / 2016.11   All Files ➤
AW-GET-094 A-130

AW-GET-094 A-130

Firmware0106 / 2015.09   All Files ➤
AW-GEV-104 A-130

AW-GEV-104 A-130

Firmware0119 / 2016.09   All Files ➤
AW-GEV-104B-130

AW-GEV-104B-130

Firmware0003 / 2017.09   All Files ➤
AW-GEV-107 A-130

AW-GEV-107 A-130

Firmware0002 / 2017.12   All Files ➤
AW-GEV-184B-250

AW-GEV-184B-250

Firmware0003 / 2017.09   All Files ➤
GEVA-264-AW-185

GEVA-264-AW-185

Firmware0119 / 2016.09   All Files ➤
AW-GEV-264 A-370

AW-GEV-264 A-370

Firmware0119 / 2016.09   All Files ➤
AW-GEV-267 A-370

AW-GEV-267 A-370

Firmware0002 / 2017.12   All Files ➤
AW-GEV-264B-370

AW-GEV-264B-370

Firmware0003 / 2017.09   All Files ➤
BB5116

BB5116

Firmware0107a / 2014   Datasheet
BB5315

BB5315

Firmware0401a / 2015.01   Datasheet
BB5315-C

BB5315-C

Firmware0401a / 2015.01
BD5115

BD5115

Firmware0301c / 2014   Datasheet
BD5336

BD5336

Firmware0200d / 2014   Datasheet
CC8130

CC8130

Firmware0202a / 2016.03   All Files ➤
CC8130 (HS)

CC8130 (HS)

All Files ➤
CC8160

CC8160

Firmware0100e / 2017.11   All Files ➤
CC8160 (HS)

CC8160 (HS)

All Files ➤
CC8370-HVR

CC8370-HVR

Firmware0204j / 2017.11   All Files ➤
CC8371-HVR

CC8371-HVR

Firmware0104j / 2017.11   All Files ➤
Autodesk Revit

Autodesk® Revit®

All Files ➤
Device Pack

Device Pack

5.9.1422017.10  5.9.1302017.08  5.9.1222017.07 All Files ➤
CD8371-HNTV

CD8371-HNTV

Firmware0104j / 2017.11  All Files ➤
CD8371-HNVF2

CD8371-HNVF2

Firmware0104j / 2017.11  All Files ➤
fd61x2v

FD61x2V

Firmware0104c / 2014  Datasheet Guide  Manual
FD7131

FD7131

Firmware0300b / 2014  Datasheet Guide  Manual
FD7132

FD7132

Firmware0301a / 2014  Datasheet Guide  Manual
FD7141

FD7141

Firmware0200a / 2014  Datasheet Guide  Manual
FD8131

FD8131

Firmware0301c / 2014  Datasheet Guide  Manual
FD8131V

FD8131V

Firmware0301c / 2014  Datasheet All Files ➤
FD8133

FD8133

Firmware0300e / 2014  Datasheet Guide  Manual
FD8133V

FD8133V

Firmware0300e / 2014  Datasheet Guide  Manual
FD8134

FD8134

Firmware0301c / 2014  All Files ➤
FD8134-SS

FD8134-SS

Firmware0105b / 2014  All Files ➤
FD816B to-HF2

FD816BA-HF2

Firmware0104j / 2017.11  All Files ➤
FD816B-HT

FD816B-HT

Firmware0101b / 2016.11  All Files ➤
FD816B to-HT

FD816BA-HT

Firmware0104j / 2017.11  All Files ➤
FD8161

FD8161

Firmware0105b / 2014  Datasheet Guide  Manual
FD8162

FD8162

Firmware0104b / 2014  Datasheet Guide  Manual
the FD8166

FD8166A

Firmware0204j / 2017.11  All Files ➤
FD8166-Na

FD8166A-N

Firmware0104j / 2017.11  All Files ➤
the FD8167

FD8167A

Firmware0204j / 2017.11  All Files ➤
FD8167-T

FD8167-T

Firmware0103a / 2016.04  All Files ➤
FD8168

FD8168

Firmware0100e / 2014  All Files ➤
the FD8169

FD8169A

Firmware0204j / 2017.11  All Files ➤
FD816C-HF2

FD816C-HF2

Firmware0100x / 2016.11  All Files ➤
FD816 by-HF2

FD816CA-HF2

Firmware0104j / 2017.11  All Files ➤
FD8177-H

FD8177-H

Firmware0103d / 2017.11  All Files ➤
FD8179-H

FD8179-H

Firmware0103d / 2017.11  All Files ➤
FD8182-F2

FD8182-F2

Firmware0104j / 2017.11  All Files ➤
FD8182-T

FD8182-T

Firmware0104j / 2017.11  All Files ➤
FD8366-V

FD8366-V

Firmware0104j / 2017.11  All Files ➤
FD836B-EHTV

FD836B-EHTV

Firmware0101b / 2016.11  All Files ➤
FD836B to-EHTV

FD836BA-EHTV

Firmware0104j / 2017.11  All Files ➤
FD836B-EHVF2

FD836B-EHVF2

Firmware0101b / 2016.11  All Files ➤
FD836B to-EHVF2

FD836B to-EHVF2

Firmware0104j / 2017.11   All Files ➤
FD836B-HIV

FD836B-HIV

Firmware0101b / 2016.11   All Files ➤
FD836B to-HIV

FD836B to-HIV

Firmware0104j / 2017.11   All Files ➤
FD836B-HVF2

FD836B-HVF2

Firmware0101b / 2016.11   All Files ➤
FD836B to-HVF2

FD836B to-HVF2

Firmware0104j / 2017.11   All Files ➤
FD8361

FD8361

Firmware0205a / 2014   Datasheet  Guide   Manual
FD8361L

FD8361L

Firmware0205a / 2014   Datasheet  Guide   Manual
FD8363

FD8363

Firmware0200d / 2014   All Files ➤
FD8365HV

FD8365HV

Firmware0203c / 2016.09   All Files ➤
FD8365EHV

FD8365EHV

Firmware0203c / 2016.09   All Files ➤
FD8367 A-V

FD8367 A-V

Firmware0204j / 2017.11   All Files ➤
FD8369 A-V

FD8369 A-V

Firmware0204j / 2017.11   All Files ➤
FD8377-HVR

FD8377-HVR

Firmware0103d / 2017.11   All Files ➤
FD8379-HVR

FD8379-HVR

Firmware0103d / 2017.11   All Files ➤
FD8382-TV

FD8382-TV

Firmware0104j / 2017.11   All Files ➤
FD8382-ETV

ETV-FD8382

Firmware0104j / 2017.11   All Files ➤
FD8382-VF2

FD8382-VF2

Firmware0104j / 2017.11   All Files ➤
FD8382-EVF2

FD8382-EVF2

Firmware0104j / 2017.11   All Files ➤
FD9171-HT

FD9171-HT

Firmware0103g / 2017.11   All Files ➤
FD9371-HTV

HIV-FD9371

Firmware0103g / 2017.11   All Files ➤
FD9371-EHTV

FD9371-EHTV

Firmware0103g / 2017.11   All Files ➤
FD9181-HT

FD9181-HT

Firmware0103h / 2017.11   All Files ➤
FD9381-EHTV

FD9381-EHTV

Firmware0103h / 2017.11   All Files ➤
FD9381-HTV

HIV-FD9381

Firmware0103h / 2017.11   All Files ➤
FE8171V

FE8171V

Firmware0101c / 2014   Datasheet  Guide   Manual
FE8172

FE8172

Firmware0102b / 2014  Datasheet Guide  Manual
FE8172V

FE8172V

Firmware0102b / 2014  Datasheet Guide  Manual
FE8174

FE8174

Firmware0200f / 2015.08  All Files ➤
FE8174V

FE8174V

Firmware0200f / 2015.08  All Files ➤
FE8180

FE8180

Firmware0200b / 2016.09  All Files ➤
FE8181

FE8181

Firmware0200h / 2015.08  All Files ➤
FE8181V

FE8181V

Firmware0200h / 2015.08  All Files ➤
FE8182

FE8182

Firmware0204j / 2017.11  All Files ➤
FE8191

FE8191

Firmware0103a / 2016.12  All Files ➤
FE8391-V

FE8391-V

Firmware0103a / 2016.12  All Files ➤
FE9181-H

FE9181-H

Firmware0103h / 2017.11  All Files ➤
FE9381-EHV

FE9381-EHV

Firmware0103h / 2017.11  All Files ➤
FE9182-H

FE9182-H

Firmware0103h / 2017.11  All Files ➤

NEW

FE9382-EHV

FE9382-EHV

Firmware0103h / 2017.11  All Files ➤
IB8168

IB8168

Firmware0100e / 2015.06  All Files ➤
IB8360

IB8360

Firmware0100d / 2017.11 All Files ➤
IB8360-W

IB8360-W

Firmware0100g / 2017.11  All Files ➤
IB8367A

IB8367A

Firmware0204j / 2017.11  All Files ➤
IB8367-R

IB8367-R

Firmware0103a / 2016.07  All Files ➤
IB8367-T

IB8367-T

Firmware0103a / 2016.07  All Files ➤
IB8367-RT

IB8367-RT

Firmware0103a / 2016.07  All Files ➤
IB8369A

IB8369A

Firmware0204j / 2017.11  All Files ➤
IB836BA-EHF3

IB836BA-EHF3

Firmware0104j / 2017.11  All Files ➤
IB836B-EHT

IB836B-EHT

Firmware0101b / 2016.11  All Files ➤
IB836BA-EHT

IB836BA-EHT

Firmware0104j / 2017.11  All Files ➤
IB836BA-HF3

IB836BA-HF3

Firmware0104j / 2017.11  All Files ➤
IB836B-HT

IB836B-HT

Firmware0101b / 2016.11  All Files ➤
IB836BA-HT

IB836BA-HT

Firmware0104j / 2017.11  All Files ➤
IB8377-H

IB8377-H

Firmware0103d / 2017.11  All Files ➤
IB8379-H

IB8379-H

Firmware0103d / 2017.11  All Files ➤
IB8382-EF3

IB8382-EF3

Firmware0104j / 2017.11  All Files ➤
IB8382-ET

IB8382-ET

Firmware0104j / 2017.11  All Files ➤
IB8382-F3

IB8382-F3

Firmware0204j / 2017.11  All Files ➤
IB8382-T

IB8382-T

Firmware0104j / 2017.11  All Files ➤
IB9371-HT

IB9371-HT

Firmware0103g / 2017.11  All Files ➤
IB9371-EHT

IB9371-EHT

Firmware0103g / 2017.11  All Files ➤
IP21x2

IP21x2

Firmware0301d / 2014  Datasheet Guide  Manual
IP3132

IP3132

Firmware0203a / 2014  Datasheet Guide  Manual
IP3133

IP3133

Firmware0201b / 2014  Datasheet Guide  Manual
IP3135

IP3135

Firmware0101c / 2014  Datasheet Guide  Manual
IP3136

IP3136

Firmware0100e / 2014  Datasheet Guide  Manual
IP3137

IP3137

Firmware0101d / 2014  Datasheet Guide  Manual
IP31x1

IP31x1

Firmware0201b / 2014  Datasheet Guide  Manual
IP31x2

IP31x2

Firmware0204a / 2014  Datasheet Guide  Manual
IP61x2

IP61x2

Firmware0105b / 2014  Datasheet Guide  Manual
IP61x4

IP61x4

Firmware0102f / 2014  Datasheet Guide  Manual
IP61x7

IP61x7

Firmware0102a / 2014  Datasheet Guide  Manual
IP7130

IP7130

Firmware0102d / 2014  Datasheet Guide  Manual
IP7131

IP7131

Firmware0200a / 2014  Datasheet Guide  Manual
IP7132

IP7132

Firmware0200a / 2014  Datasheet Guide  Manual
IP7133

IP7133

Firmware0202a / 2014  Datasheet Guide  Manual
IP7134

IP7134

Firmware0202a / 2014  Datasheet Guide  Manual
IP7135

IP7135

Firmware0400a / 2014  Datasheet Guide  Manual
IP7137

IP7137

Firmware0401a / 2014  Datasheet Guide  Manual
IP7138

IP7138

Firmware0300a / 2014  Datasheet Guide  Manual
IP7139

IP7139

Firmware0300a / 2014  Datasheet Guide  Manual
IP7142

IP7142

Firmware0302c / 2014  Datasheet Guide  Manual
IP7151

IP7151

Firmware0200g / 2014  Datasheet Guide  Manual
IP7152

IP7152

Firmware0200c / 2014  Datasheet Guide  Manual
IP7153

IP7153

Firmware0300a / 2014  Datasheet Guide  Manual
IP7154

IP7154

Firmware0300a / 2014  Datasheet Guide  Manual
IP7160

IP7160

Firmware0105a / 2014  All Files ➤
IP7160-SS

IP7160-SS

Firmware0105a / 2014
IP7161

IP7161

Firmware0105a / 2014  Datasheet Guide  Manual
IP7161-SS

IP7161-SS

Firmware0105a / 2014  Datasheet
IP7251

IP7251

Firmware0100f / 2014  Datasheet Guide  Manual
IP7330

IP7330

Firmware0300b / 2014  Datasheet Guide  Manual
IP7361

IP7361

Firmware0201f / 2014  Datasheet Guide  Manual
IP8130W

IP8130W

Firmware0100f / 2018.01  All Files ➤
IP8132

IP8132

Firmware0201a / 2014  Datasheet Guide  Manual
IP8133

IP8133

Firmware0200a / 2014  All Files ➤
IP8133W

IP8133W

Firmware0200a / 2014  All Files ➤
IP8151-SS

IP8151-SS

Firmware0301e / 2014  Datasheet
IP8162-SS

IP8162-SS

Firmware0102a / 2014  Datasheet
IP8162P

IP8162P

Firmware0200d / 2014  All Files ➤
IP8162P-SS

IP8162P-SS

Firmware0200d / 2014  Datasheet
IP8166

IP8166

Firmware0204j / 2017.11  All Files ➤
IP816A-HP

IP816A-HP

Firmware0201b / 2017.08  All Files ➤
IP816A-LPC

IP816A-LPC Kit

Firmware0201b / 2017.08  All Files ➤
IP816A-LPC-v2

IP816A-LPC-v2 Kit

All Files ➤
IP816A-LPC Highway-Street

IP816A-LPC

Firmware0201b / 2017.08  All Files ➤
IP816A-LPC(18mm)

IP816A-LPC(18mm)

Firmware0200c / 2015.08  All Files ➤
IP816A-LPC(40mm)

IP816A-LPC(40mm)

Firmware0200c / 2015.08  All Files ➤
IP8330

IP8330

Firmware0104a / 2014  Datasheet Guide  Manual
IP8332

IP8332

Firmware0401a / 2015.01  Datasheet Guide  Manual
IP8332-C

IP8332-C

Firmware0401a / 2015.01  Datasheet Guide  Manual
IP8332-SS

IP8332-SS

Firmware0110a / 2014  Datasheet
IP8160

IP8160

Firmware0100g / 2017.11  All Files ➤
IP8160-W

IP8160-W

Firmware0100j / 2017.11  All Files ➤
IP8352

IP8352

Firmware0200a / 2014  Datasheet Guide  Manual
IP8355EH

IP8355EH

Firmware0201c / 2014  All Files ➤
IP8361

IP8361

Firmware0100c / 2014  Datasheet Guide  Manual
IP8365H

IP8365H

Firmware0201c / 2014  All Files ➤
IP8365EH

IP8365EH

Firmware0201c / 2014  All Files ➤
IP8371E

IP8371E

Firmware0302a / 2016.04  All Files ➤
IB9381-EHT

IB9381-EHT

Firmware0103h / 2017.11  All Files ➤
IB9381-HT

IB9381-HT

Firmware0103h / 2017.11  All Files ➤
IP9171-HP

IP9171-HP

Firmware0103g / 2017.11  All Files ➤
IP9181-H

IP9181-H

Firmware0103h / 2017.11  All Files ➤
IZ9361-EH

IZ9361-EH

Firmware0103g / 2017.11  All Files ➤
ipvsdt

IPVSDT

Ver. 8.12016.05  All Files ➤
iView is

iViewer App

All Files ➤
IW2

IW2

1.3.0.2
2015.10  All Files ➤
IZ7151

IZ7151

Firmware0101f / 2014  Datasheet Guide  Manual
MA8391-ETV

MA8391-ETV

All Files ➤
MD7530

MD7530

Firmware0101a / 2014  Datasheet Guide  Manual
MD7560

MD7560

Firmware0103a / 2014  Datasheet Guide  Manual
MD8531H

MD8531H

Firmware0201a / 2016.03  All Files ➤
MD8563-EH

MD8563-EH

Firmware0104j / 2017.11  All Files ➤
DEH-MD8563

MD8563-DEH

Firmware0104k / 2018.01  All Files ➤
MD8564-EH

MD8564-EH

Firmware0104j / 2017.11  All Files ➤
MD8565-N

MD8565-N

Firmware0104j / 2017.11  All Files ➤
ND8301

ND8301

Firmware1.9.1.8 / 2015.04  All Files ➤
ND8321

ND8321

Firmware1.2.0.201 / 2016.09  All Files ➤
ND8322P

ND8322P

Firmware2.2.0.102 / 2017.06  Firmware1.3.0.3 / 2015.10 All Files ➤
ND8401

ND8401

Firmware1.9.1.8 / 2015.04  All Files ➤
ND8422P

ND8422P

Firmware2.2.0.102 / 2017.06  Firmware1.3.0.3 / 2015.10 All Files ➤
ND9441

ND9441

Firmware2.2.0.102 / 2017.06  All Files ➤
ND9441P

ND9441P

Firmware2.2.0.102 / 2017.06  All Files ➤
ND9541

ND9541

Firmware2.2.0.102 / 2017.06  All Files ➤
ND9541P

ND9541P

Firmware2.2.0.102 / 2017.06  All Files ➤
NR7401

NR7401

Firmware1.0.751 / 2014  Datasheet Guide  Manual
NR8201

NR8201

Firmware1.0.261 / 2014  Datasheet Guide  Manual
NR8301

NR8301

Firmware1.0.670 / 2014  Datasheet Guide  Manual
NR8401

NR8401

Firmware1.1.0.102 / 2014  All Files ➤
NR9581

NR9581

Firmware1.13.1.10 / 2017.12  All Files ➤
NR9681

NR9681

Firmware1.13.1.10 / 2017.12  All Files ➤
PD8136

PD8136

Firmware0201a / 2014  All Files ➤
pt31x2

PT31x2

Firmware0203c / 2014  Datasheet Guide  Manual
pt31x3

PT31x3

Firmware0101a / 2014  Datasheet Guide  Manual
pt31x4

PT31x4

Firmware0102b / 2014  Datasheet Guide  Manual
pt31x7

PT31x7

Firmware0100h / 2014  Datasheet Guide  Manual
PT7135

PT7135

Firmware0400a / 2014  Datasheet Guide  Manual
PT7137

PT7137

Firmware0500b / 2014  Datasheet Guide  Manual
PT8133

PT8133

Firmware0100g / 2014  Datasheet Guide  Manual
PT8133W

PT8133W

Firmware0100g / 2014  Datasheet Guide  Manual
pz61x2

PZ61x2

Firmware0105e / 2014  Datasheet Guide  Manual
pz61x4

PZ61x4

Firmware0105b / 2014  Datasheet Guide  Manual
PZ7131

PZ7131

Firmware0200a / 2014  Datasheet Guide  Manual
PZ7132

PZ7132

Firmware0200a / 2014  Datasheet Guide  Manual
PZ7151

PZ7151

Firmware0101b / 2014  Datasheet Guide  Manual
PZ7152

PZ7152

Firmware0101b / 2014  Datasheet Guide  Manual
pz71x1

PZ71x1

Firmware0201a / 2014  Datasheet Guide  Manual
pz71x2

PZ71x2

Firmware0201a / 2014  Datasheet Guide  Manual
pz81x1

PZ81x1

Firmware0104a / 2014  All Files ➤
pz81x1w

PZ81x1W

Firmware0104a / 2014  All Files ➤
RX7101

RX7101

Firmware0200a / 2014  Datasheet Guide  Manual
Shepherd

Shepherd

2.3.0.1042017.07  All Files ➤
sd61x2v

SD61x2V

Firmware0101d / 2014  Datasheet Guide  Manual
SD7151

SD7151

Firmware0301b / 2014  Datasheet Guide  Manual
sd73x3

SD73x3

Firmware0103c / 2014  Datasheet Guide  Manual
SD8121-SS

SD8121-SS

Firmware0100g / 2014  Datasheet
sd81x1

SD81x1

Firmware0103c / 2014  Datasheet Guide  Manual
SD8323 A-SS

SD8323E-SS

Firmware0100g / 2014  Datasheet
the SD8362

SD8362E

Firmware0203d / 2014  Datasheet Guide  Manual
SD8362 A-SS

SD8362E-SS

Firmware0102b / 2014   Datasheet
the SD8364

the SD8364

Firmware0200d / 2016.03   All Files ➤
sd83x1 to

sd83x1 to

Firmware0202b / 2014   All Files ➤
sd83x2 to

sd83x2 to

Firmware0202b / 2014   All Files ➤
sd83x3 to

sd83x3 to

Firmware0202b / 2014   All Files ➤
SD9161-H

SD9161-H

Firmware0103g / 2017.11   All Files ➤
SD9361-EHL

SD9361-EHL

Firmware0103g / 2017.11   All Files ➤
SD9362-EH

SD9362-EH

Firmware0103g / 2017.11   All Files ➤
SD9362-EHL

SD9362-EHL

Firmware0103g / 2017.11   All Files ➤
SD9363-EHL

SD9363-EHL

Firmware0103g / 2017.11   All Files ➤
SD9364-EH

SD9364-EH

Firmware0103g / 2017.11   All Files ➤
SD9364-EHL

SD9364-EHL

Firmware0103g / 2017.11   All Files ➤
SD9365-EHL

SD9365-EHL

Firmware0103g / 2017.11   All Files ➤
SD9366-EH

SD9366-EH

Firmware0103g / 2017.11   All Files ➤
SD9366-EHL

SD9366-EHL

Firmware0103g / 2017.11   All Files ➤
SF8172

SF8172

Firmware0100d / 2014   Datasheet  Guide   Manual
SF8172V

SF8172V

Firmware0100d / 2014   Datasheet  Guide   Manual
SF8174

SF8174

Firmware0100c / 2014   All Files ➤
SF8174V

SF8174V

Firmware0100c / 2014   All Files ➤
MS8391-HOUSE

MS8391-HOUSE

Firmware0102c / 2017.08   All Files ➤
MS8392-HOUSE

MS8392-HOUSE

Firmware0102c / 2017.08   All Files ➤
VAST

VAST

1.13.1.1042018.01  1.13.1.102017.10 1.12.5.3012017.07  1.12.5.2012017.04 1.12.5.1012017.01  1.12.1.1022016.09 1.12.1.82016.07  1.11.0.1012016.02 1.10.0.2022015.05  1.9.0.82014.12  1.8.5.32014.08 All Files ➤
VAST 2

VAST 2

2.0.0.57202018.01  All Files ➤
VC8101

VC8101

Firmware0104j / 2017.11  All Files ➤
VC8201

VC8201

Firmware0101a / 2016.04  All Files ➤
vıvocloud

VIVOCloud

All Files ➤
VS2101

VS2101

Firmware0301g / 2014  Datasheet Guide  Manual
VS2402

VS2402

Firmware0301b / 2014  Datasheet Guide  Manual
VS2403

VS2403

Firmware0103e / 2014  Datasheet Guide  Manual
VS3100P

VS3100P

Firmware0203b / 2014   Datasheet  Guide   Manual
VS3102

VS3102

Firmware0201e / 2014   Datasheet  Guide   Manual
VS7100

VS7100

Firmware0301b / 2014   Datasheet  Guide   Manual
VS8100

VS8100

Firmware0102b / 2014   All Files ➤
VS8100-v2

VS8100-v2

Firmware0100e / 2017.11   All Files ➤
VS8102

VS8102

Firmware0300c / 2014   All Files ➤
]]> https://www.xvraid.com/firmware/vivotek-firmware-dvr-nvr-ipc-software-download.html/feed 0 ZKTeco dvr installation and user manual https://www.xvraid.com/guide/zkteco-dvr-installation-and-user-manual.html https://www.xvraid.com/guide/zkteco-dvr-installation-and-user-manual.html#respond Wed, 21 Dec 2022 19:10:50 +0000 https://www.xvraid.com/?p=1229 ZKTeco dvr installation and user manual The DVRs of the Z8400XE/F-CL series of the ZKTeco brand allow cameras of up to 5 MP to be added to their channels in all video technologies and IP channels, except in CVI, which allows a maximum of up to 4 MP in the 3 models. , which are:

“How to add IP cameras in ZKTeco DVR pentahybrid DVRs?”

The DVRs of the Z8400XE/F-CL series of the ZKTeco brand allow cameras of up to 5 MP to be added to their channels in all video technologies and IP channels, except in CVI, which allows a maximum of up to 4 MP in the 3 models. , which are:

  • DVR PENTAHIBRIDO 4 CHANNELS HD + 2 CHANNELS IP.
    Z8404XE-CL
  • PENTAHYBRID DVR 8 HD CHANNELS + 4 IP CHANNELS.
    Z8408XE-CL
  • PENTAHYBRID DVR 16 HD CHANNELS + 8 IP CHANNELS.
    Z8416XF-CL

The DVRs by default do not have the option of IP channels, but only show the BNC analog channels, it is necessary to change the display mode.

ZKTeco dvr installation and user manual
ZKTeco dvr installation and user manual

Load More :

It shows us the following options:

  • Analog channels only. (Example; the Z8404XE-CL with 4 BNC channels).
  • Analog channels plus IP channels. (Example; the Z8404XE-CL with 4 BNC channels + 2 IP channels).
  • Change to ALL channels as IP. (Example; the Z8404XE-CL with 6 IP channels).

mceclip4.png

This applies to all 3 recorder models.

To make this change it is necessary to perform the following steps:

  • Enter the Menu and choose “System”.

mceclip0.png

  • Select System Parameters.

mceclip1.png

  • Click on Display Parameters.

mceclip3.png

  • Once inside this display parameters menu, in the “display mode” part, choose the one that is required or desired, and finally click on Save.

mceclip4.png

When making the change in the DVR, the system must be restarted, when turning on it will already have the corresponding spaces to add the IP channels.

To add those cameras you have to enter the menu –> Channel management –> Channel information –> Add channel.

mceclip6.png

It will open a new tab and you have to click Refresh to scan and show the IP cameras in the same network segment, to add it you have to select the camera and click OK.

mceclip7.png

For cameras that are not ZKTeco but that can be added by ONVIF, it is necessary to edit it to enter your username and password so that the status changes to “Online”.

By following the steps described above, it will be possible to enable the channels and in the same way add the IP cameras in the ZKTeco penta-hybrid DVRs.

Do you know how to modify the video signal of ZKTeco DVRs?

Like other video surveillance brands, ZKTeco’s 8000 series DVRs are penta-hybrid recorders, that is, they accept all video technologies.

  • AHD
  • TVI
  • CVI
  • CVBS (Analog)
  • IP

Thus accepting coaxial HD cameras from other brands that use a different video technology.

The purpose of this article is to show how to adjust any video channel (BNC) to a specific video technology, having our factory recorder all BNC channels are configured as automatic ” Auto Mode ” accepting any AHD, TVI, CVI camera while the latter has a resolution equal to or less than the capacity of the DVR.

The steps to follow are those: 

1.- Enter the Menu and select Channel Management.

5.png

2.- Go to General Configuration and Channel Display.

6.png

3.- Select the channel where it says “Channel Selection”.

4.- Once the channel is selected, locate the “Detection” part, select an option:

  • Modo AHD
  • CVI mode
  • TVI mode

7.png

5.- To finish, just select Save and that’s it, the video channel will accept the configured video technology.

How to enter the OSD menu in ZKTeco DVRs?

Sometimes it is necessary to adjust the resolution of an analog HD camera, many of these cameras have an internal menu called OSD in which you can adjust the parameters of the camera, such as:

  • Day – Night mode.
  • Image parameters (contrast, brightness, gain, etc.)
  • Video output (resolution, video technology, FPS).
  • menu language
  • camera reset

It is important to mention that both the video technology of the channel and that of the camera are the same, since if this is not the case, the OSD menu will not be accessible; an easy way to validate that they are on the same technology is for the video in live view to be seen in COLOR.

Once the aforementioned has been validated, the steps to enter the camera menu are the following:

1.- Select the channel where the camera to be modified is.

2.- Enter the PTZ control, left clicking on the video image and selecting the PTZ icon.

1.png

3.- The PTZ part on the right side of the screen will open, you have to verify and/or change that the ” Control Mode ” option is as UTC Control .

4.- When validating point 3, there are two ways to access the internal menu of the camera, one through the GUI joystick or with Iris +.

  • Joystick, selecting the middle button as Enter.

2.png

  • Selecting Iris + is the Enter button, while Zoom + and Zoom –  mark the direction up and down.

3.png

How to configure the Email in the ZKTeco 8000 series DVRs to receive notifications?

This article will show how to configure email in the ZKTeco 8000 series recorders, to send a notification for some type of event. The devices have the option of sending notifications to a maximum of 4 different recipients, receiving the notification at the same time.

For this configuration, it is recommended to use a Google-based email such as Gmail and that is not from an institutional domain, but rather a personal email.

For example:

Because for the configuration it is required in the first instance to activate the Verification in 2 steps and then create an application password, all this within the Google account precisely in ” Manage your Google Account ” and ” Security” , and this only it is possible with a personal account. 

We leave you a help link where it is shown step by step how to generate this application password:

Once the password is created, it is recommended that it be written down somewhere so that the characters are not forgotten. 

For example:

1.png

When you already have this password, you can configure the Email, we must follow the following steps: 

1.- Enter the Menu and then Network. 

2.png

2.- Now in Network we will go to Advanced and Email. 

3.png

3.- In this menu the final configuration will be made, where: 

  • Sender Email: The Gmail email from where the recorder emails will be sent will be placed. 
  • Password/Confirm Password: Enter the password created for the recorder, the application password, and confirm it. 
  • Activate SSL.
  • Recipients 1..4: Place the name in User and the Email of the user.
  • SMTP server : We will place the address of the Gmail smtp server, this is ” smtp.gmail.com”.
  • SMTP port:  The port that we can use are 465 and/or 587 . 

4.png

4.- After configuring point 3, it is recommended to Save so that no data is deleted.

5.- When saving the configuration, an email test can be done. In each recipient there is an envelope icon, when pressed, it will perform a test and it will be possible to validate if the email is leaving successfully. 

5.png

In the mail it will arrive as follows. 

6.png

By following the steps described above, the email configuration will be ready, and if some type of event is configured, for example movement, it is enough to activate the Email box to receive notifications. 

]]> https://www.xvraid.com/guide/zkteco-dvr-installation-and-user-manual.html/feed 0