Reset password on H264 DVR All Brands - XVRAID XVR-DVR-NVR CCTV DESK

Reset password on H264 DVR All Brands

The so called H264 DVR is a very popular generic video recorder and this article will help you in case you have lost the password. Read carefully and follow all the steps on how to reset H.264 Network DVR password.

First of all, let’s clarify what are H.264 DVRs. These H.264 DVRs are a generic type of video recorders manufactured by thousands of manufacturers all over the world and are marketed in many brand names (usually when the DVR starts up it will show up there the H.264 logo). Since there are thousands of DVRs brands on the market and the way to reset the password can vary from one model to another.

The first step of doing a password reset on a H.264 DVR is to consult the equipment’s manual or to contact the DVR’s dealer/reseller, most of the resellers (TVT, Dahua, Samsung, Panasonic, Bosch, Axis) support their products. However sometimes you have a H.264 DVR with an unknown brand and there’s no manual available or no technical support team. If you have lost the password for your non-branded / generic H.264 DVR, you could try the password reset methods shown in this guide.

Below are listed the techniques and the procedures we will deploy reset the password for H.264 DVR. Try each of them until you’re able to recover your lost password.

1. Try to use DVR factory default password
2. Use H.264 DVR master password generator
3. Remove the battery to reset the password
4. Use jumper to reset the passwords

1. Try to use DVR factory default password

Trying to use the DVR’s default password is the first thing for a H.264 DVR reset password recovery procedure. It happens a lot that the original DVR’s password was never been changed. Check the DVR manufacturer’s manual or website for the factory/default password. Take a loot at the table below with the DVR default password for different manufacturers. Perhaps your DVR is listed there (the empty space on the password means you need to leave the password box empty). Also you can find more default passwords on this link.

DVR model Username Password
AVTECH admin admin
BSC admin 666666
COP admin
Citrox admin
Dahua admin admin
DG Seg admin
DSS admin 888888
Everfocus admin 11111111
Foscam admin
FVN admin 123456
HDL admin 12345
Ivio admin
Mulititoc admin 88888888
Multiview admin
Pelco admin 0
Pentaxxy admin 86244455
Posonic admin
Posonic admin 888888
Posonic admin 111111
Posonic admin 666666
Posonic guest
Posonic guest 888888
Posonic user 666666
RG admin
Sagemcom admin admin
Stillus admin 666666
Venetian admin 123456
Ventura admin 666666
VioStor admin admin
Voyager admin 519070
H.264 Yoko admin 11111111

2. Use H.264 DVR master password generator

Many CCTV manufacturers provide master password generators to allow administrator access to their CCTV products. Usually they use the current date of the security system in order to generate a super password. Others may use the serial number of the equipment.

A lot of the recorders on the market are generic DVRs manufactured in China and in many cases re-branded by third party companies. You can tell by the user interface which is exactly the same across many brands such as HD iDVR, Everfocus, Everest, Sansco, Luxvision 5716, 6008T-EL, HA-1648, CP-Plus, Citrox, BB-4CH, Yoko, TVT, Super Live Pro DVRs and other generic brands simply named “H.264 network, H.264 DVR”. If your DVR has a login screen similar to the one shown below, then most likely it’s a H.264 generic DVR. Note: the user’s interface color scheme may have been further modified by the re-branding company.
1You need to find out what’s the date on your security system DVR. Run the machine and simply check the timestamp on the screen. The date is used by the password generators to create a unique super password.
2Note: DVR master password generators will work only with specific DVR models.

HiSilicon DVR password generator

pic3If your DVR runs on a chip manufactured by Hisilicon, then you can check the Hisilicon password generator to get a working password for your recorder. This generator works with these models: Hi3511, Hi3512, Hi3515, Hi3520, Hi3531, Hi3532, Hi3521, Hi3520A, Hi3535, Hi3520D, Hi3530A, Hi3535A.

On the internet you can find 3 versions of the Hisilicon H.264 DVR password generator that work with the models mentioned above. Try all of them one by one until you’re able to reset the password. Below are the links to download the DVR password generators.
H.264 DVR Password Gen01
H.264 DVR Password Gen02
H.264 DVR Password Gen03

How to use the HiSilicon H.264 DVR password generator?

The image below shows an example of how to use this password generator software. Enter the year, month and day (format YYYYMMDD) that you see on your DVR’s timestamp. Let’s say the date on your screen is 02/17/2020 the you have to type: 20200117.
pic5Below is an example of the password generated by the software that should be entered into the DVR, it is unique and valid only for that date (and day). This type of password generator software works with DVR models that use an internal chip manufactured by Hisilicon.

Dahua DVR password generator

Dahua is a worldwide manufacturers and in many cases they sell their equipment under other local brands. Download and test it (refer to this article “Dahua Daily Password Generator” for more details). Click here to download the Dahua DVR password generator.

How to use the Dahua DVR password generator

Below is an example of using the Dahua password generator, type the year month and day (format YYYYMMDD) you see on the DVR’s timestamp.

After entering the DVR date, click on “Create PW” button and you will see the password created on the password window. Give it a try on your DVR.  If the password didn’t go through, you can find more information in the article: How to reset Dahua DVR admin password.

H.264 DVR password generator

In many cases the DVR has an unknown brand. This a common thing since many Chinese manufacturers sell their DVRs or cameras to third party companies which they resell under local not-so-known brands or simply as H.264 DVR. In itself, H.264 is not really a brand but just the name of the compression algorithm. You can download the generic H.264 password generator in this link.

How to use the H.264 DVR password generator

The image below shows an example of using the H.264 password generator. You have to enter the date shown up on your DVR’s timestamp.

Excel DVR password generator

This Excel spreadsheet has a built-in formula that can be used to generate super passwords for the H.264 DVRs. It works the same way as the previous methods, you need to enter the date and the tool will generate a master password. Click here to download the Excel H.264 DVR password generator.

3. Remove the battery to reset the DVR

A few of H.264 DVRs can be reset by another technique: removing the battery from the motherboard. By doing that, the clock of the system will be reset and the DVR will go back to factory defaults and you can login by using the default username and password.

How long you need to have the battery removed? It depends on the DVR’s model number. Usually it takes 10 minutes for the card to be discharged. So, keep the battery out until the DVR’s internal clock has gone to default. Remove the battery from the DVR as illustrated below.
pic11When the clock runs out of the battery, the timestamp on the recorder goes to 01/010/2000 and you either can try the default password or use the DVR password generator to create a new passwords based on this date. Most likely the default username will be: admin and password: empty, 12345 or 123456. For old Dahua DVRs the password can be “000000”.

4. DVR reset using a jumper

In order to perform this kind of reset, you need to open up the cover of your DVR and find the reset pins on the motherboard.  The H.264 DVRs that have these pins are for example: old Dahua DVRs, old TVT DVRs, Swann DVR models etc.

An example is shown below can be reset by closing the two contacts (pins) for 3 minutes. pic13If you still have problems and are not able to reset the password of your H.264 DVR then try contacting your reseller/dealer.

32 thoughts on “Reset password on H264 DVR All Brands”

Leave a Comment