Remote Access for Hik-Connect Guide - XVRAID XVR-DVR-NVR CCTV DESK

Remote Access for Hik-Connect Guide

Enable Hik-Connect Guide Remote Access Platform Services On Recorders

What is Hik-Connect 3.0 Platform?
The Hik-Connect Platform has two different services to allow for remote access to Hikvision devices.
Hik-Connect P2P Service – Peer to Peer protocol is used between electronic devices where either device can initiate communication.
Hik-Connect DDNS Service – Allows accounts to assign unique domain names to online devices. Port forwarding is required.*
Both Hik-Connect Services require the NVR or DVR network settings to be configured with a correct IP address, subnet mask, default gateway and DNS server
Hik-Connect Accounts are required to use these services.
NOTE: Please see the quick start guide on how to set the NVR or DVR network settings. Security Tip:
* Minimize the number of ports opened to the Internet. Port forwarding should only be configured when absolutely necessary. Avoid common ports by changing the default device ports and / or mapping different external ports to the internal ports.

hik connect pic1 hik connect pic2 hik connect pic3 hik connect pic4 hik connect pic5 hik connect pic6 hik connect pic7 hik connect pic8 hik connect pic9 hik connect pic10 hik connect pic11 hik connect pic12 hik connect pic13 hik connect pic14 hik connect pic15 hik connect pic16

8 thoughts on “Remote Access for Hik-Connect Guide”

Leave a Comment