Understanding the Basics: What You Need to Know Before Buying

Before diving into the different types of security cameras, it’s crucial to understand some basic but important considerations that will influence your choice.

Identifying Your Security Needs

When considering the installation of a security camera system, the first step is to assess your specific needs. The requirements of a sprawling estate versus a cozy apartment differ vastly. Similarly, a retail business will have different security needs compared to a manufacturing unit. Begin by asking yourself the following questions:

Answering these questions will lay a solid foundation for your search and ensure that you don’t end up with a security camera system that’s either overkill or insufficient for your needs.

Security Camera Buying Guide and How to Choose

Considering the Location

The location where the cameras will be installed plays a pivotal role in your decision-making process. Indoor cameras differ significantly from outdoor cameras, particularly in terms of durability and weather resistance. If you’re considering outdoor surveillance, ensure the cameras are weatherproof and have adequate night vision capabilities.

Exploring Security Camera Technologies

When choosing a security camera, it is critical to understand the differences and similarities between IP security cameras and HD over coax security cameras to select the right type for specific needs.

What are IP Security Cameras?

IP (Internet Protocol) security cameras are digital video cameras that use networks to transmit image data and control signals over an IP network. These cameras can be directly accessed from a network connection, making them highly versatile for a variety of settings.

Advantages of IP Security Cameras

High Resolution: IP cameras are known for high-resolution images, which can go up to 4K resolution, allowing for clearer and more detailed images.

Scalability: They are highly scalable as one can easily add more cameras to the existing network without significant infrastructure changes.

Remote Accessibility: IP cameras can be accessed and controlled remotely, making it possible to monitor footage from anywhere in the world via the internet.

Disadvantages of IP Security Cameras

Cost Factors: They tend to be more expensive than other types, both in terms of initial setup and maintenance.

Network Dependency: These cameras require a stable network connection, which can be a limitation in areas with poor connectivity.

What are HD Over Coax Security Cameras?

HD over coax security cameras transmit high-definition video over coaxial cable. These cameras are an upgrade from the traditional analog CCTV systems, providing better resolution and clarity without the need for new cabling infrastructure.

Advantages of HD Over Coax Security Cameras

Cost-effectiveness: Generally less expensive than IP cameras and utilize existing coaxial cable setups.

Ease of Installation: They are relatively easy to install, especially if replacing existing analog systems.

Reliability: Less dependent on network bandwidth and do not suffer from network-induced lag.

Disadvantages of HD Over Coax Security Cameras

Limited Resolution: While improved over analog cameras, their resolution does not compare to the high levels achievable by IP cameras.

Scalability Issues: Adding more cameras often requires additional DVRs (Digital Video Recorders), which can complicate the system.

Comparing Video Quality and Resolution

When it comes to resolution, IP cameras generally offer more with options going up to 4K, whereas HD over coax typically maxes out at 1080p. This makes IP cameras a better choice for scenarios where detail is critical.

Comparing the Cost Implications

IP cameras have a higher upfront cost primarily due to the need for networking equipment and possibly, higher quality cabling. However, HD over coax cameras often involve less expensive equipment but might incur more costs if extensive cabling is needed.

Remote Access Capabilities

Both IP camera systems and HD over coax camera systems excel in remote access as they can be configured for view from any location thru PC, cell, or tablet through the internet. 

Use Case Analysis

For large, expanding facilities or highly detailed surveillance needs, IP cameras would be more suitable. In contrast, HD over coax cameras are well-suited for smaller setups or where budget constraints are significant.

Future Trends in Security Cameras

The future likely holds further enhancements in camera resolution and network capabilities for IP cameras, and continuous integration of advanced analytics. HD over coax might see improvements in compression and transmission to allow for higher resolutions.

Both IP and HD over coax security cameras offer distinct advantages and disadvantages. Your choice should depend on your specific needs, budget, and desired scalability. Understanding these aspects will guide you in choosing the most suitable type.

Exploring Types of Security Cameras

With a basic understanding of what to consider before purchasing, let’s delve into the most popular types of security cameras available on the market.

Dome Cameras

Dome cameras are named for their dome-like shape, making them more discreet than other types. They’re excellent for indoor use, especially in retail or commercial settings, where they can blend in with the decor while providing a wide viewing angle.  In addition, most of our dome cameras are also vandal resistant.

Bullet Cameras

Bullet cameras are long and cylindrical. They are typically used outdoors, mounted on walls or ceilings. These cameras are known for their strong night vision capabilities and long-distance viewing, making them ideal for monitoring large areas like backyards or parking lots.  Whether you need a wide angle or a zoom we have the perfext bullet security camera for you. 

Wireless vs. Wired Cameras

Another crucial consideration is whether to go for wireless or wired cameras. Wireless cameras offer flexibility in placement and are generally easier to install. However, they depend on your Wi-Fi signal’s strength and can be more susceptible to interference. On the other hand, wired cameras require a more complex installation process but provide a more stable and reliable connection, making them well-suited for extensive surveillance systems.

Smart Cameras

Smart cameras come with features like motion detection, facial recognition, and automatic alerts. These cameras not only record footage but also analyze it, sending you notifications when something out of the ordinary happens. They’re perfect for homeowners who want to stay informed about their property’s security in real time.  We also have specialty cameras such as PTZ, license plate, and fisheye cameras.

Key Features to Look For

Delving deeper into the specifics, here’s what you should look for when shopping for a security camera:

Selecting the right security camera for your home or business requires careful consideration of your specific security needs, the features you value most, and the type of camera that best suits your space. By taking the time to understand the different options available and what each offers, you can make an informed choice that ensures your property is watched over effectively. Remember, the goal is not just to deter potential intruders but to give you the confidence that comes with knowing your space is secure. Whether you opt for a dome camera for your business interior or a bullet camera for outdoor surveillance, ensuring your peace of mind is the ultimate priority.

.

Unlimited Access Anywhere, Anytime

When you combine our “Blue Line” IP Cameras with one of our compatible IP camera network video recorders you can keep an eye on your assets no matter where you are. Take advantage of the free remote viewing app to view on your cell. Use the free software to view and control you cameras on your tablet, or computer. Stay connected and have peace of mind knowing you can monitor your cameras remotely, without any additional monthly fees.

LATEST FIRMWARE UPDATES FOR YOUR DEVICE

UPDATING YOUR SECURITY CAMERA FIRMWARE

Firmware Updates

In order to do a firmware update you must first identify the EXACT model number of your DVR or NVR unit. The model number can be found on the sticker located on the bottom or side of the unit. All CCTV Security Pros model numbers begin with the prefix “CSP” (Example, CSP-XXXX). Please match your model number to the list provided below. You will also need to locate your order confirmation email to determine when the unit was purchased. Once you have identified the correct model number and firmware please continue by following the instructions below.

Blue Line IP Camera Troubleshooting v2

Upgrading Your Firmware

Please identify the correct model from the list of firmware provided below.

Please select the appropriate link and download the .bin file. Once the download is completed copy the .bin file to a USB Flash/Thumb Drive. We suggest formatting your USB drive to FAT32 before attempting the update.

**Note : Units with Build Dates of 2013 or earlier may require you to rename the file to “update.bin” before launching the upgrade.

Once the .bin file has been transferred onto your drive you can insert the USB Drive into either of the two USB ports found on your unit. One can be found on the front panel and one can be found on the rear of the unit.

Once the drive is inserted into the unit go to the following menu:

Main Menu –> Setting –> System –> Upgrade. Click Start. Find and select the .bin file you transferred to the USB Drive and Click Start.

*NOTE – On select models you will need to go to:

Main Menu–> Info –> Version –> Upgrade

The unit will now begin upgrading to the latest Firmware Revision that is available for your device. Once completed the system will reboot. After the reboot we recommend doing the following:

1) Remove the USB Drive from your system.

2) Change your passwords on your “admin” account. For assistance in altering your password please follow this link: https://www.cctvsecuritypros.com/content/pdfs/password-account-settings.pdf

.

IMPORTANT: If you are having difficulty identifying the correct firmware please email us at support@cctvsecuritypros.com with your order number and unit model number.

User Account Locked

Your system will lock itself out when you or someone else has attempted to log into your DVR

with an incorrect user/password combination more than three times within 30 minutes

When this happens you have two options.

1. Wait 30 minutes after the last failed login attempt and try again.

2. Reboot the DVR by using the rear toggle switch or by unplugging.

When the unit powers back on try and login with the default username and passwords.

Username: admin

Password: admin

or

Username: 888888

Password: 888888

If neither of these passwords get you into your system you will need to email us at

Support@CCTVSecurityPros.com

and request a Master Password. Once we can confirm your

account we will happily be able to provide you with the correct login credentials.

Please have your Order Number or DVR/NVR Model Number when requesting a Master

Password.

*Note: The DVR/NVR Model Number can be found on the Bottom or Side of your system.

.

IP Camera Harness Repair

If your connector looks like the ones below, moisture has gotten into your RJ45 connector. The number one cause of premature IP camera failure has to do with improper weatherproofing techniques. If caught early enough a simple cotton swab and rubbing alcohol will clean that connector right up! You may need to resort to some heavier duty electrical contact cleaner if the cotton swab method does not work.

If all else fails and the connector is too far gone and cleaning it will not work, you will need to perform a harness repair.

.

In order to perform the repair you will need:

.

.

1 x RJ45 Crimp Tool1 x Male RJ45  1 x Female to Female RJ45

Connector

.

1 x Your choice of weatherproofing ( Weatherproof junction box or weatherproof Female to Female connection)

.

.

Start by removing the RJ45 end off of your IP cameras harness. Be sure

.

Strip back the outside insulation to expose the internal cables.

.

Organize the cables to match the pinout of the IP camera. Slide the organized cables into the connector and crimp. All CCTV Security Pros IP cameras will use this pinout.

Connect your Female to Female RJ45 connector to check your work, you should have a functioning IP camera now that its void of all corrision.

Now that the IP camera has been repaired we still need to weatherproof this connection. It is now more vulnerable than ever!

Consider using a weatherproof junction box to make your connections in, or perhaps a weatherproof Female to Female connector.

Remember that different coupling styles exist so make sure that you are informed about how to use the coupler before you start crimping wires.

Troubleshooting Steps 4/8/16 Channel

(Cannot Find the Network Host)

To solve the error, please verify that the camera is properly plugged into the back of the system. If you unplug and re-plug it back in this should verify it is connected physically.

If the issue continues go to Main Menu > Camera > Camera List and delete the camera with the red status from the bottom list and do a Device Search to verify the camera is showing up on the top list.

If the camera does not show up this means the cable is not connecting properly, which could either mean the camera is not getting power or isn’t transmitting data. The best way to determine whether it is an issue with the Camera or Cable is to bench test the camera on a known working cable.

If it does show up but it has a different IP Address, please confirm the IP Address is in the 10.1.1.1-255 range (This is the default range of the internal Switch).

If the camera is not within the correct IP range, then the camera could need to be modified on the top list to properly connect in which you would select the camera, hit modify, type in the camera’s username and password and set the IP address to DHCP to automatically obtain an IP or statically assign the camera an IP address to match your switch range and gateway.

If the camera is on the correct range, you should be able to add it to the bottom list and it will come up with Green or Red, If Red double check the error message on the live view on the system.

If the Error says Invalid Username or Password, go back to Settings > Camera > Camera List and modify the camera at the bottom of the list and type in the correct login information.

If the error says Cannot Find the Network Host, check the IP Address is in the correct range, if it is you need to verify your cable is good by testing the camera with another known good cable or testing on a short patch cable as the cable could be experiencing packet loss.

Make sure the cable is T568B Standard and is within 100 meters (328 feet.)

Night Vision Issues

When a camera goes into night vision mode, the infrared LEDs around the lens turn on. If the video signal at nighttime or in dark locations is washed out, foggy or you see “halos” on the screen it is because the infrared LEDs are reflecting back into the camera lens.

cameras LEDs to focalize on the mounting surface and greatly reduce the Infrared distance.

Adding 3rd Party Cameras to Blue Line NVR

We always recommend using Blue Line IP cameras with our Blue Line NVRs for the easiest and most complete experience possible. However, we understand that using 3rd Party Cameras can be beneficial in some applications. This guide will explain the basics of adding a 3rd Party IP camera into your Blue Line NVR.

Information you will need to add 3rd Party Cameras.

With your camera attached to one of the PoE ports on your NVR, you’ll navigate to the camera settings from the main menu.

A 3rd Party Camera normally will not add itself, so you will need to go into the Camera List and click on Search Device. If the camera is detected, you will be able to select it and click on the Modify IP button toward the middle of the screen.

When modifying the IP address of the camera the default IP range for the PoE ports on the NVR is

10.1.1.xxx so you’ll want to make sure the camera is on the same range.

You will need to know the camera’s password to change the IP Address. Once the IP is successfully changed it should update after clicking Search Device again

Check the box to the left of the camera and click Add. Most cameras will show up with the Manufacturer as ONVIF. If they do not and show up as red, you will need to click on the edit button on the camera and change the Manufacturer to match the camera’s manufacturer, or to ONVIF if the manufacturer of the camera is not listed.

While in the modify window you can also enter the password for the camera in the password field. Once that is completed you can click OK. After a few seconds the status should change to a green icon and then you should be able to see the camera’s live view. Please keep in mind that if the Error Message says Invalid Username or Password you may need to login to the camera from the Web and setup an Onvif User for the system to login with.

If the camera is still showing offline, setting the manufacturer to PELCO can sometimes resolve the issue.

Additional 3rd Party Camera Information

DVR/NVR Rebooting

If your DVR or NVR is rebooting by itself please read the guide below.

If your DVR or NVR is rebooting once a week this is completely normal. Our DVR and NVR systems are designed to reboot once a week (Tuesday at 2AM by default).

If your DVR or NVR is rebooting more frequently you first want to check the power source of the DVR or NVR.

Be sure you are using the correct Power Source that was included with the DVR or NVR. Below are the correct power adapter specs so you can identify the correct one.

NVRCUBE = 12V, 2.0Amp NVRWIFI = 12V, 2.0Amp

LITE Series DVR = 12V, 2.0Amp

Pro Series DVR = 12V, 5.0Amp

Pro Series NVR = 3 Prong Power Cord to Power Outlet Extreme Series DVR/NVR = 3 Prong Power Cord to Power Outlet

If you can confirm you are using the correct Power Adapter you may need to double check the outlet you are plugged into. Try an alternate outlet and eliminate any Battery Backup Power Supplies for test purposes.

If the power source is not causing the reboot cycle it could be related to the internal hard drive. To check this out please continue reading.

First you will need to Power Off the DVR. We suggest powering the system down from the Power Switch on the rear of the system or by simply unplugging the Power Cable.

Once the system has been powered down you will need to open up the system. Please see below to locate the screws that need to be removed.

NVRCUBE or NVRWIFI

There will be 4 Phillips head screws located on the bottom of the system. Once the screws are removed the top cover will lift off.

Lite Series DVR

There are 2 Phillips head screws located in the rear and 2 on the side of the DVR, 1 on each side. Once the screws are removed the top cover will lift off.

Pro Series DVR/NVR

There will be 4 Phillips head screws located on the rear of the system. Once the screws are removed the top cover will slide towards the rear and lift off.

Extreme Series DVR/NVR

There will be 2 Phillips head screws located on the rear of the system. Once the screws are removed the top cover will slide towards the rear and lift off.

Once the top cover has been removed it will expose the Hard Drive and its connections.

First we want to Unplug the Large Black Connector. Press down on the metal tab and pull the connector out of the Hard Drive.

Now we want to unplug the second smaller connector (Blue Cable) from both ends. Press down on the tab and remove from the Hard Drive as well as the System Board.

Once the connections have been disconnected. Plug them back in securely and listen for the metal tab to click. This will ensure a good connection in between the System Board and Hard Drive.

Note*

While you still have the system open, it might be a good idea to check the cooling fans for any dust or debris that could be stopping the fan from moving. This could cause the DVR or NVR to overheat.

Once the connections are tight, lets put the top cover back on. When the cover is back on you can proceed to power on the system. Once the system is powered on you will need to monitor the system and check if it is still rebooting.

Disconnecting The Internet

If the system is still rebooting you may want to disconnect it from your Router or Modem by unplugging the Ethernet cable in the rear. You will loose your remote viewing capabilities temporarily while unplugged but can help us diagnose the issue.

With the cable unplugged you may want to monitor the system closely to see if this has made any changes to the rebooting issue.

Disconnecting Cameras and Other Sources

Disconnecting cameras, alarms, extra monitors and microphones is the last thing we can try to solve your rebooting issues.

Cameras, monitors, and microphones mounted near high voltage could be causing your system to reboot by itself. If your system detects any incoming voltage or amperage coming into the rear inputs the system will shut down to protect itself from damage.

Leave your main Display Monitor and Power Source connected. Disconnect one input at a time to see if it makes a change in your reboot cycle. If you notice a change in the rebooting you can single it out by using this method of elimination.

How To Setup a Security Camera System?

The first phase in setup of a security camera system consists of installing the cameras and running the wire. The second phase is completing the connections between the cameras and the recorder, which depends on the type of camera system you have purchased.

How To Setup a DVR Camera System

DVR camera systems consist of security cameras that have BNC jacks to send video over coax wire, and a 12VDC power connector for power. Such coax wire based systems use RG59U siamese cables that have BNC and 12VDC power connectors at each end, which allow video and power to be run together over one “siamese cable.” As shown in the setup video below, BNC connectors are silver colored metal connectors that twist lock on to the video jacks of a camera and DVR recorder.

Infrequently, an installer may use network cabling with video baluns instead of coax cabling, which was very common with older CCTV systems to transmit video signal over long distances. Regardless of whether you are using coax wire or video baluns, setup of a DVR camera system is similar as demonstrated in the following video:

How To Setup a NVR Camera System

NVR camera systems use plug-and-play IP Cameras that connect directly to built-in PoE ports on the back of the NVR. Such systems are also commonly referred to as PoE IP camera systems because the cameras use Power over Ethernet technology to send power/video/data all over one network cable. We recommend using CAT5e cable as a minimum, and CAT6 wire is recommended for runs longer than 150ft as its thicker wire gauge allows for improved power transmission.

Our IP camera systems feature plug-and-play compatibility between the NVR and IP camera. Unless otherwise specified, we ensure the cameras and NVR we sell are compatible with each other and allow even a novice user to setup a IP security camera system.

To gain a good understanding of your purchase, we recommend customers bench test IP cameras with the NVR recorder before installing the cameras. Once it is established that all cameras are operational, continue with mounting the cameras at the desired location and running the camera wire. Since installation errors are common when crimping CAT5e or CAT6 network cable, we recommend using a cable continuity tester to safeguard against wiring related issues.

As each camera is installed and connected to its wire, follow the video below to learn how to connect each IP camera to the NVR in a NVR camera system.

Once cameras are installed and wired to the digital video recorder it is time to login, and start using the system, which leads us to the third phase

How to use your surveillance system

1. How To Login to a Security Camera System

Before you are able to login to your camera system over the web, you need to login at the DVR or NVR itself using a mouse. Connect the recorder to a monitor that supports at least 1080P resolution. We recommend using a HDMI input capable monitor. Turn on the recorder and login using two possible login methods.

Please watch the video below to learn more from our video tutorial about the two different ways to login to your or security system.

In case you are unable to login due to a forgotten password, it is easy and secure to reset the password and gain entry into the unit. It is required that you be present at the recorder when following the video guide below on how to reset the login password. As shown in the video below, by answering some simple security questions you can quickly reset the login password.

2. Viewing Live Video and Audio on a Security System

All of our DVR Systems and HD NVR systems allow multiple viewing options. You can view multiple cameras in a grid-view or view one camera at a time in full screen mode. Full screen mode also allows the user to listen to audio from security cameras with built-in microphone. To hear audio from cameras, all of the following conditions must be met:

For a comprehensive guide of the different viewing options offered by our security camera systems, please watch the following video:

Regardless of whether you have an IP security camera system or DVR camera system, both provide the user with two types of zoom:

It is important to understand the difference between digital zoom and optical zoom, and the fact that optical zoom can only be used in live view mode. Below is a detailed video demonstration of each type of zoom function and how both can be utilized during live view to see objects far away. Using a 4MP security camera mounted 7ft above the object of interest, we show the power of optical zoom provided by a motorized zoom security camera to view objects in fine detail.

If your system has motorized zoom cameras or a outdoor PTZ camera that you purchased from CCTV Camera World, they can be easily controlled using our surveillance video recorders. Regardless of whether the motorized cameras are HDCVI or IP cameras, or whether your recorder is a DVR, XVR, or NVR, the cameras can be controlled using the friendly GUI interface of our systems as shown in the following video.

3. Setting Recording Resolution

A common misconception about our camera systems is that all cameras have to be the same resolution, which is not the case. Cameras of different resolutions can be used on the same recorder in any of our systems, granted the cameras are within the maximum resolution limit of the recorder. This is true for systems consisting of Tribrid DVR, XVR, or NVR recorders.
Encoding settings can be set individually for each camera channel. Depending on the maximum recording resolution supported by the recorder and the camera, our surveillance recorders allow up to 12MP recordings. All of our DVR and NVR recorders also have dual video encoding technology to provide two streams of video for each camera channel:

The Encoding menu has several settings that can be set. A good understanding of the following settings is important in getting the most out of our security camera system purchase from CCTV Camera World.

The in-depth video tutorial below discusses encoding settings available in your system and how to configure them.

4. Customizing Video Settings

We manufacture our cameras to produce the best possible picture quality automatically. Sometimes peculiar lighting scenarios in a scene may require customization. Our DVRs and NVRs allow multiple picture quality settings to be modified from the recorder as explained in the detailed video tutorial below. It is important to note that there is a difference in capabilities to modify image settings when comparing coax based cameras versus IP cameras.

Coax based cameras produce video that is encoded by the DVR, thus allowing picture quality to be modified before the video is saved by the DVR. In contrast, IP cameras encode video that is streamed to the NVR for saving the video stream; the video is not encoded by the NVR. Therefore, any changes made in the picture settings on the NVR must be communicated back to the IP security camera. If an incompatible IP camera is used with an NVR, such changes will not be communicated to the IP camera, and changes will not apply before video is encoded by the camera.

Our systems allow a wide variety of picture settings to be toggled depending on the camera specifications. In addition to picture brightness and contrast, the user can toggle image quality features such as backlighting, glare compensation (WDR), and image flip.

https://youtu.be/zW3g-dTV30w

5. Recording Method Configuration

All of our security systems offer a variety of video recording methods. Each security camera can be set to record independently and the user has the option to choose from the following recording methods:

The digital video recorders in our systems even allow multiple recording methods for each camera. For example, cameras can be set to record all the time or during a portion of the day using the scheduled recording method, while also recording upon motion detection. This preserves video integrity in case a motion event is missed, and is very helpful when reviewing recorded security footage to allow the user to skip to points in the timeline when motion is detected. The video tutorial below is an in-depth guide on how to set the different recording methods for each camera in your surveillance system.

https://youtu.be/jRfV3N8sAqY

6. Playback Recorded Video on your Surveillance System

CCTV Camera World’s security camera systems have a user-intuitive graphical interface to playback recorded video. Using a mouse connected to your recorder, it is easy to review recorded security footage in the Search menu. It takes 3 simple clicks to playback recorded video:

The video above is a comprehensive tutorial on how to playback recorded video, in which we cover:

You can playback one camera or multiple cameras depending on the resolution of the recording and the playback capability of the recorder that is part of your system. Our 4000 series NVRs support playback of up to eight 1080P channels, while our 5000 series NVR support up to sixteen channel playback at 1080P. Stronger playback capability is available when playing video over the network using our free computer client software to playback video on a PC or Mac workstation.

7. How to Download Video from a Security Camera System

When there is an incident, it’s important to have a camera system that allows easy download of security footage catching the perpetrator in the act. Our security camera systems are based on this simple principle to allow easy video download of a short video segment to a USB drive and playback on a Windows or Mac computer. To download video from any of our standalone recorders you will need a USB flash drive that is formatted with the NTFS or FAT  file system. The flash drive should not be more than 256GB. The video guide below on how to download footage from your security camera system walks you through the process.

Briefly, below is a list of simple steps on how to download video from a DVR Camera System or HD IP Camera System purchased from CCTV Camera World.

8. How To View Downloaded Footage from a Security Camera System

Once security footage has been downloaded from your surveillance system, it can be reviewed on a Windows or Mac OS computer using our free playback software called Smart Player. You can download it here for Windows and Mac. Here is a list of features of Smart Player which makes our systems one of the best security camera systems in the industry for video archiving and review:

.

Safety cautions

Product overview

DVR

Camera

Power Cable Splitter

BNC Cable

Xmeye Dvr System Instructıons For Use

Read Also : Camius devices troubleshooting

Hard Drive Installation

IMPORTANTTo record videos and play the historical videos, the installation of the Hard Disk Drive is a must.
Otherwise,you can only watch the live video.
This DVR system works with a 3.5” SATA Hard Drive.The Hard Drive should be formatted after it’s installed.×Dismiss this alert.

System Connections

IMPORTANTDo not fix the AHD camera before you can view the image on the monitor and confirm the ideal position to install it.×Dismiss this alert.

1.Plug a power adapter into the DVR and the socket to power on the DVR.

2. Connect a monitor to the HD Output or VGA Output on the DVR with an HDMI cable or VGA cable (not included).

3. Connect the Ethernet Cable with the DVR and your router.

4. Connect the AHD camera with the BNC Cable.

5. Connect the Yellow Video Connector to the BNC Video Input on the DVR, and connect the Red Power Connector to the Male Connector of the Power Cable Splitter.

6. Connect the Female Connector of the Power Cable Splitter with another power adapter. Then plug the power adapter into the socket to power on the camera.

Operate dvr system with a monitor

Startup Wizard

After connecting the DVR and cameras to power, wait for 2-3 minutes. A Startup Wizard will start to guide you via a series of pop-up windows.

Connect the USB mouse to the DVR, then click Next until you see the window of Time-Language Configuration.

1.Select the time zone, date format, time format, language, and set the time for your DVR system.

2. The default password is empty, please reset it for your DVR following the tip.
The new password should be more than 6 digits and use the combination of numbers and letters to ensure your system’s security.

3. Select safety questions and enter the answers for resetting the password if necessary.
You can also enter your email address for getting the verification code to reset the password.

4. Check if the network connection status is normal. If not, you can configure it by clicking Network.

5. Scan the QR code to get the Serial Number of your DVR system and download the App named XMEye into your mobile device.

6. Before fixing the cameras, you can log in to XMEye App to check the live view to confirm the ideal position.

7. Detection based on human shape is enabled by default.
The DVR system will send alerts to your mobile device when there is human shape detected by the cameras.
Please refer to the section of Motion Detect the detailed setting.

IMPORTANTClick Next and OK to exit the wizard. You can right click on the screen, then go to Main Menu > Startup Wizard to bring it up again.
If the wizard is no longer needed, just check the box before Don’t Display the Wizard again on the first interface of the Startup Wizard.×Dismiss this alert.

Live Video

You will see the live videos from the AHD cameras in split-screen mode (9 screens by default) after exiting the wizard.

※ Move the mouse cursor to the live video of any channel, some icons may be displayed according to the setting.

Notes:

1.The icons of and are displayed by default, while for icon , and , please right click andgo to Main Menu > Alarm (see on page 15) to enable them.

2. If you want to loop to display the live videos from some certain channels in full-screen mode, please go to Main Menu > System > Tour to enable this function.

3. For viewing the live video from one channel in full-screen mode, please move the mouse cursor to the desired channel, then double click. To exit full-screen mode, double click again.

Hard Drive Formatting

When you receive the system, the system has a pre installed hard disk, which does not need to be formatted,but if you have to replace another hard disk, it needs to be formatted at first ,then it can be used normally Install the Hard Drive first, then right click and go to Main Menu >Advanced > Storage to check if the type is Read/Write or the status is Normal.

If not, please click Format Storage to start formatting your Hard Disk Drive.

Video Recording

Right click on the screen, then go to Main Menu > Record > Record Conf. to set the record mode and record plan.
This DVR is set to record videos 24 hours a day by default.

Channel:

Select the channel to set the record mode and plan. You can select a single channel or all channels.

Redundancy:

Installing 2 pieces of Hard Disk Drive is required when enabling this function, and HM245 doesn’t support it.

Length:

Set the maximum video length of each recording from 1 minute to 120 minutes. It’s 60 minutes by default.

PreRec:

The camera will start recording a video around 5s before it detects the motion or human shape.

You can reset the time from 1s to 30s, but the accuracy of the pre-recording time may be affected by the bitrate.

Mode:

Set the recording mode and the options are Schedule, Manual and Stop.

Record Plan:

Set the recording schedules.

Notes:

The oldest video will be overwritten by the latest one by default when the Hard Disk Drive runs out

of space.

Video Playback

Right click on the screen, then go to Main Menu > Record > Playback to play the video recorded.

You will see the different playback modes in the pop-up window of Play Mode.

Explanation of playback modes

1.Common Playback

Select the channel(up to 4 channels at the same time), a period and a date on Blue background to

play all types of videos recorded.

1. Area for Video Playing
2. Playback Buttons
3. Timeline
4. Channel
5. Filters
6. Filtered Videos List
7. R: Standard Videos
8. M: Videos recorded when the camera detects motion or human shape.
9. Detailed Info. of the Selected Video
10. Search
11. Show/Hide Filtered Videos List
12.Timeline by Hour/Minute

TipFilters will not be available after you left click on the timeline, but you can exit this mode and re-enter to select the filter.×Dismiss this alert.

Option 1 :

Left click on the Green/Red (Green for standard videos recorded, and Red for the videos recorded whenthe camera detected motion or human shape) part of the timeline of each channel to play the historical videos.

Option 2 :

Left click on the live video of one channel, show the filtered video list, then double click on the selected video to play it.

Description of Playback Buttons

Left click on the live video of any channel, then start using the buttons to control the video playback.

Tips:

① You can click the icon to cut a video, then click to back up to the external storage.

② Previous Frame and Next Frame work only when pausing the video.

③ The speed of Fast Reverse and Fast Forward will be displayed on the right end of Playback Buttons.

2. Sync Playback

This function aims to put the videos from different channels at the same time to compare.

Select 2 channels at least ( up to 4 channels), a period and a date on Blue background to play the historical videos simultaneously at the selected time on the same timeline.

3. Dayparting

This function aims to put the videos from the same channel but at different time to compare.

Select a channel, number of split screens, and a period to play the videos recorded from this channel on different timelines.

NotesYou need to press and hold the left mouse and move on the bar of Period to select time period.×Dismiss this alert.

4. Smart Express

Select one channel or all channels, then select the speed of Fast Playback, the system will play all the videos recorded with the speed you selected.

5. Smart Search

Select one channel and a time period, then check the box before Detect and select a date on Blue background to play the videos recorded when the camera detected the motion or human shape.

※Double click the thumbnail to play the related videos.

6. Face Search

Select one channel, a time period and a date on Blue background to play the videos recorded when the camera detected faces.

Video Backup

Step 1:

Insert the USB disk into the USB port of the DVR system. Right click on the screen, then go to Main Menu >Record > Backup to start.

Step 2:

Select your USB disk, then click Backup to bring up a pop-up window.

Step 3:

Select Channel, Start Time and End Time, then click Add to display all the filtered videos.

Step 4:

Check the box to select the video files and Backup format, then click Start to back up the videos.

Tips:

① The format of the USB Drive should be FAT 32.

② An alternative solution to back up the videos is listed below.

• Go to the interface of video playback and click to show the filtered video list.

• Check the box to select the videos.

• Click to start backing up. The next steps are the same as the first solution mentioned above.

Snapshot Setup

The system will capture the snapshots 24 hours a day when the camera detects motion or human shape.

Go to Main Menu > system> SnapShot Conf. to reset the time interval of capturing a snapshot, and set up the schedules when the camera will capture a snapshot as well.

Alarm

IMPORTANT:

The alarms of Motion Detect and Human Detect are enabled by default. If you need to record videos whenthe camera detects the face or gets blocked as well, please enable Face Detection and Video Blind.

Please go to Main Menu > Alarm to set the alarm you need.

Motion Detect

The camera will start to record videos when it detects motion.

Channel:

Select the channel you’d like to enable motion detection.

Enable:

Check the box to enable motion detection.

Sensitivity:

If you select higher sensitivity, the camera will be more easily to be triggered to start recording videos. It’s advised to select Middle to balance the accuracy and effectiveness of the alarm, thus reducing the false alarms.

Region:

Click Set, then press and hold the left mouse to drag and select the area for detecting. The pink area indicates the selected area.

Period:

Set up to 4 time periods for each day to send the alerts when the camera detects motion.

MD Interval:

Set the time interval of two alerts. It aims to decrease the frequency of the alerts caused by the same moving object.

Record Channel:

The selected channel(s) will start recording when the current channel detects motion.

Tour:

The display will loop to display the live video from the selected channel(s) in full-screen mode when the current channel detects motion. You can go to Main Menu > System > Tour to set the time interval to show the live video in full-screen mode.

Snapshot:

The selected channel(s) will capture a picture when the current channel detects motion.

PTZ Activation:

The cameras don’t support this function.

PostRec:

The camera will remain to record the video around 10s after the motion or human shape detection ends. You can reset the time from 10s to 300s.

Show Message:

After enabling this function, the display will pop up a window to show the Alarm Status for all kinds of alarms when the cameras detect motion, human shape, or more.

Send Email:

Before enabling this function, please go to Main Menu > System > NetService, then double click on EMAIL option to set up your email address to receive the alerts.

Write Log:

The logs of the alerts will be written into the system once you enable this function. You can go to Main Menu > Info > Log to check the detailed log information.

FTP upload:

The system will send the videos recorded or snapshots captured to the FTP server you set when the camera detects motion. Please go to Main Menu > System > NetService, then double click on FTP option to set up your FTP server.

Mobile reported:

The system will send alerts to your mobile device when the camera detects motion. Please install the App and add the DVR to the App following the section of OPERATE DVR SYSTEM ON MOBILE DEVICE on page 18.

Up-to-Coaxial Control

Right click on the main menu and select XVI control to start setting up your camera.

※If the live video from the camera is mirrored or flipped, you can check the box before Mirroring or Overturn to fix it.

※If you set something wrong, please click Restore to get back to default settings.

.

NotesFor the setting of alarms like Video Blind, Video Loss, Human Detect and Face detection, please refer to the settings of Motion Detect. If prompting Video Loss, the DVR will not record videos, but only to send alarms.

TROUBLESHOOTING

The DVR System Boots Up Abnormally Or Reboots Automatically.

If the issue persists, please contact Support for more help.

.

How Should I Do If I Forget My Password?

• Please click Forgot Password when logging into the DVR system.

• The system will ask you the security questions you set in the Startup Wizard, please enter the right answer to reset your password.

• If you forget the answers, click Forget Answers to enter the interface of Verification Code.

• Launch XMEye App,tap > FIND PWD on an Android device or tap Forgot your device password?(on the interface of Add Device) > FIND PWD on an iOS device to scan the QR code on the left side to get a verification code, then enter it into the box on the interface of Verification Code to reset your password. However, if you set an email to get the verification code in Startup Wizard, the App will send the code to that email. You need to get it from email, then enter it on the interface of Verification Code.

.

How Long Can A Hard Disk Drive Record For This DVR System?

There are 4 AHD cameras connecting to this DVR system by default. These cameras are with the resolution of 1080P and variable bitrate which depends on the surveillance scenes. If the bitrate is around 2Mb/s, the corresponding size of the video file will be around 21G per day.

As a result, a Hard Disk Drive with the capacity of 1T may record around 12 days.

.

How Can I Connect An Extra Camera With The DVR System In Addition To The 4 Cameras In The Package?

DVR system supports up to 8 cameras to be connected. Please contact Hiseeu to get the same type of cameras and the corresponding cables.

If you just have a camera in hand, please follow the steps below:

For the camera with the format of TVI/CVI/SVI/CVBS, right click on the screen, select XVI&AHD to set the Signal of the channel to Auto or the corresponding format of your camera, then connect the camera with the DVR system.

For an IP camera, please go to Main Menu > System > Digital > ChannelType to check the box of the fourth line, then go back to the main screen and move the cursor to the channel you’d like

to connect the camera.

Click in the center of the screen to start adding the camera.

.

The Image From The Camera Is Upside Down.

Right click on the main screen and click XVI Control, then check the box before Mirroring or Overturn to flip the image.

.

What Should I Do If It Runs Out Of The Space On Your Hard Disk Drive?

The DVR system is set to loop recording by default, which means the latest videos will overwrite the old videos automatically when it runs out of the space on the Hard Disk Drive.
You can back up the important videos, then delete the videos or format the Hard Disk Drive.

.

Why Does The Hard Disk Drive Stop Saving Videos?

.

The App On My Mobile Device Cannot Receive Snapshots When The Camera Detects Motion, Human Or The Camera Gets Blocked, Etc.?

The App can receive the snapshots by default and you can check from Alarm Push/Alarm of the App.

.

Why Does The App Remind Me Of “Maximum Video Link”?

For remote viewing, such as from App or PC Client, you can only simultaneously access the live videos from 6 channels at most. Please close the unnecessary channel.

.

Why Doesn’t The PC Client Watch The Live Videos?

.

Why Doesn’t The PC Client Watch The Live Videos?

.

What Should I Do If I Got Too Many Push Notifications From App?

This DVR system can support to send you alerts when the camera detects motion, human, face, video feed loss,or the camera gets blocked. You can go to Main Menu > Alarm to disable certain kinds of alarms to reduce alerts.What’s more, you can lower the Sensitivity, set the Region and Period to reduce alerts.

.

How Can I Modify The Time Stamp And Channel Name Displayed On The Screen When Playing The Videos Recorded?

You can go to Main Menu > System > Display to select the channel you’d like to set, then enable Time Display and Channel Title, then click Set. You can even drag them to your desired position on the screen.

.

Is the fan noise on my DVR NVR recorder normal?

Q- Is the fan noise on my recorder normal?

A- Digital or network Vide Recorder’s fan is comparable to one in a mini PC, and the sound coming out of the vent that you may hear is a sign of a DVR that’s working well.

The working fan indicates that the trapped heat is being dissipated, and the DVR can record 24/7 on the hard drive, and without this cooling mechanism, the DVR and hard drive’s life span will be shortened.

How to add IP Camera to Camius DVR (Advanced Security XVR)

Camius Trivault DVR recorders are designed to support analog security cameras via coaxial wiring and IP cameras over the Network. To add an IP camera to Camius DVR, you’d need to add PoE cameras to your local Network. Then, connect a regular network or PoE switch to the LAN port of the Camius DVR. Based on the example of a Camius 16-channel DVR, the connecting diagram illustrates this process. This system allows users to quickly and seamlessly integrate analog and IP cameras, providing greater flexibility in security camera selection.

If you are not using a PoE (power-over-ethernet) switch or a PoE injector, you can power the IP camera by connecting a UL-listed 12VDC-2AMP power supply to the DC plug on the camera and an ethernet cable between the IP camera and the router or switch on your local network.

Camius TRIVAULT4K2168R Connection Diagram

Camius TRIVAULT4K184R, TRIVAULT4K184R2 Connection Diagram

Navigate to the DVR’s Menu >> System >> General >> Mode >> Set to XVR and Apply.

Wait 1 to 2 minutes for the surveillance DVR to reboot in a hybrid XVR mode. This switch will reset the Configuration and Password.

There are a few ways to add IP cameras to the DVR, and we will describe them below.

Adding IP Cameras in the Start Wizard

While in the Start Wizard, navigate to the Network>> Date/Time >> IP Cameras.

Click the Search button to add compatible IP cameras on your local Network. Next, select the IP camera(s) you want to add, and then click the arrow icon to add them to the DVR, followed by the Next button.

Select the suitable Protocol from the dropdown (Private is for Camius IP cameras), enter the IP camera(s) credentials (User Name and Password), and click Add. Green status indicates a successful connection; grey status could show a password or network error.

Adding an IP camera while in the DVR’s Setup Menu

If you add IP cameras to DVR’s menu, navigate to Channel >> IP Channels.

Select the IP camera you wish to add, click the ‘Add‘ tab or use a plus button.

The ‘Add IP camera‘ window will pop up with IP camera details.

How to add IP Camera to Camius DVR (Advanced Security XVR) 21

Once the IP camera is added to the DVR, it will appear under the IP channel list. The green state means the camera has been added successfully. A grey color state means the IP camera needs attention, and when you click on the state icon, it will indicate if the error is caused by a wrong IP camera username/password or if it has a network issue.

To avoid network issues, make sure that your camera, DVR, and router are on the same IP address segment, e.g.

How to add IP Camera to Camius DVR (Advanced Security XVR) 22

Using the Camius XVR system, users can quickly and seamlessly integrate analog and IP cameras, providing greater flexibility in security camera selection. In addition, Camius Hybrid 8-Channel DVR recorders support up to 12 and 16-channel DVRs and up to 24 HD cameras, making a scalable solution for residential and commercial surveillance needs.

It is important to note that the cameras’ quality will significantly impact the system’s overall performance and effectiveness. Of course, high-quality cameras will provide better images, enabling more effective monitoring and surveillance, but also, Camius IP cameras offer intelligent motion, sound, and AI detection. Other manufacturers’ IP cameras are usually limited to basic video motion detection.

How to install a hard drive in a Camius DVR or NVR?

Installing a hard drive in a DVR (digital video recorder) or an NVR (network video recorder) (DVR NVR for short) is a relatively straightforward process. Still, it is essential to follow the steps carefully to ensure proper installation and prevent damage to the equipment. Here is a step-by-step guide on how to install a hard drive in your surveillance DVR or NVR recorder.

Camius network and hybrid digital video recorders accept 3.5″ and 2.5″ SSD internal hard drive disks. While 8 channel DVR and NVR recorders accept a single hard drive up to 10 TB in capacity, 16-channel DVR and NVR recording, along with 32-channel NVR will support a 14TB hard drive on each SATA port. 

Visit this link to see the tested and recommended hard drives, CLICK HERE

1 – Gather Tools and Equipment

You will need a Phillips head screwdriver, the hard drive you want to install, and any necessary screws (when you order a DVR or NVR from Camius without a pre-installed hard drive, the product box will include a set of screws for the hard drive disk installation).

2 – IMPORTANT: Make sure your DVR / NVR is unplugged and powered off

3 – Removing the Top Cover or the Video Recorder

Remove any screws from the Recorder’s top cover (chassis) using a Philips head screwdriver. Carefully remove the top chassis and set it aside (picture 1)

Picture 1 – 8 channel DVR

4 – Insert the Hard Drive

Place the hard drive into the hard drive bay, ensuring the drive is oriented correctly and appropriately seated.

5 – Connect the SATA Data and Power Cables

Connect the Data and Power cables to the two hard disk drives and place the hard disk drives on the video recorder’s case. The Data cable connects the hard drive to the DVR NVR’s motherboard. Locate the SATA port on the DVR’s motherboard and connect one end of the SATA cable to it. Then, connect the other end of the cable to the hard drive. The SATA Power cable provides power to the hard drive. Locate the SATA Power cable and connect one end to the hard drive and another to the Power Supply (pictures 2 and 3)

Picture 2 – Power and Data Cables on the Hard Drive

Picture 3 – Power and Data Cables on the DVR or NVR recorder’s board

Read Also : LaView NVR setup and user guide

6 – Secure the hard drive with srews

Carefully flip the video recorder case and secure the hard disk drives to the recorder with the four (4) screws if it is one SATA HDD (pictures 4 and 5) and eight (8) screws for the 2 SATA HDDs (picture 6)

Picture 4 – DVR with one internal SATA bay

Picture 5 – DVR with one internal SATA bay

Picture 6 – NVR with two internal SATA bays

7 – Return the DVR NVR top cover

Place the top cover on the DVR NVR and secure it with the screws (picture 7)

Picture 7 – DVR with one internal SATA bay

8 – Power on the DVR NVR

Power on the DVR NVR and allow it to boot up completely. If the hard drive was installed correctly and is in working condition, it should be recognized by the DVR and ready for use. Remember to format the hard drive (here is the guide on how to format the hard drive). Ensure that you use the power supply with the Camius video recorder.

IMPORTANT: Some users may find an issue when the hard drive is not recognized or not showing on the DVR. One of the primary reasons could be a wrong or defective recorder’s power supply.

That’s it! Your DVR NVR should now have a new hard drive installed, allowing it to store more video footage. Follow these steps carefully and seek additional assistance if you encounter any difficulties.

How to adjust my DVR NVR monitor resolution?

Camius video surveillance DVR NVR camera recorders have HDMI and VGA video output to live video feed on your monitor.

VGA output supports a max resolution of 1080p, while the HDMI video output 4K video resolution. So if the monitor you use with the Camius DVR or NVR recorder is capable of 4K and the camera, you can view live videos in 4K.

TRIVAULT4K2168R

How to adjust my DVR NVR monitor resolution? 19

IPVAULT1128PR

Two ways to adjust the DVR NVR monitor resolution

You can adjust the DVR NVR monitor resolution in the Wizard Setup mode or by navigating to Setup >> System >> General >> Output Configuration.

While in ‘Wizard Setup’ mode, choose an output resolution that matches your monitor. The DVR should adjust the output resolution automatically to match the best resolution of your monitor at the system startup. 

Please note that some legacy monitors could fail to communicate their acceptable resolution. In this case, please manually plug the video surveillance DVR into a newer monitor and change the resolution to the lowest setting, then save and plug the older monitor back to see if it’s supported.

After completing the Start Wizard, you can further adjust the Display Output Resolution using the following Menu Path: Setup – System – General – Output Configuration.

Select the output resolution suitable for your TV/Monitor. 1080P(1920 x 1080) will suit most monitors. If your DVR supports 4K output resolution, you can select either 2K (2560 x 1440) or 4K (3840 x 2160) to take advantage of the higher resolution that your 4K TV provides.

You can also adjust the size & position of the display screen to match your monitor/TV by using the ‘Scale and Offset’ feature; click the tab ‘Setup,’ which allows you to:

Click once or long-press the left button of your mouse on the arrow to adjust the size and position, or you can scroll the supplied USB mouse’s wheel to adjust. Click the right button of your mouse to exit, and click Apply to save your modifications.

How to reset the DVR and NVR video recorder to default factory settings

To reset DVR or NVR to default settings, navigate to the left bottom of the screen to the main menu. Select Setup >> System >> Maintenance >> Load Default

Here you can select the setting you wish to set to default. If you do not wish to reset the password, do not check the System boxes. Please note Load Default settings do not format your hard drive.

You’d need to enter the system password in the Authentication pop-up window (picture 1), which will lead to restarting your recorder (picture 2).

Picture 1

Picture 2

Navigate to Setup >> System >> Maintenance >> Reset Settings (Picture 3), where you can not select settings to reset so that it will reset your system completely, including the login credentials. You can choose ‘Format HDD‘ if you wish to format your hard drive, leading to erasing any recorded footage.

Picture 3

How to change your DVR and NVR password and add a user

You can update the ‘admin’ password by clicking the ‘User Edit’ button. You will need the admin’s current password to authenticate the new password.

Camius NVR and DVR recorder have an advanced user management feature to add multiple users to the system and control their permissions. System administration (admin) can add users, edit their permissions and delete them.

Navigate to the Main Menu in the bottom left corner, select System >> Multi-User (picture 1)

Picture 1

How to add a user to Camius NVR or DVR recorder 15

Click on the Edit icon in the User Edit column and select ‘Enable‘ in the User Enable tab. You can change the User Name or keep it as ‘user1‘. Create the new user password, confirm it, and click on the ‘Save‘ tab (pictures 2 and 3)

Picture 2

Picture 3

Then click the gear icon in the last Permission column to open the User Permission dialogue. Select (tick checkbox) the permissions you wish to grant to the new user. Click Save (picture 4)

Picture 4

How to troubleshoot if my DVR is not powering on?

If you’re having trouble with your DVR not powering on, here are some recommended troubleshooting steps:

Step 1 – Check the LEDs on the front panel, a steady green LED (PWR) means your DVR is powered on normally, and a blinking red LED (HDD) means ongoing recording on the hard drive. 

8 channel DVR

16 channel DVR

.

Step 2 – Check the sounds coming out of your recorder. A faint fan sound and a faint hard drive sound are normal, and a click sound when you plug in the DC connector and turn on the switch is typical.

Step 3 – If you have the green LED on but no output on the monitor, follow these steps:

Step 4 – Check the power outlet and the power supply unit of the DVR. If the power supply doesn’t have any LED indicator or the LED light is very faint and not bright green, and there is no fan sound coming from the DVR, the power supply may need replacement. If your DVR has running hardware warranty, please contact us. If the DVR is covered with warranty, you can order a new power supply on Camius site.

Why can’t I access my Camius IP cameras, DVR, and NVR on my Camius View app? 

If you can not access your Camius IP cameras, DVR (digital video recorder), or NVR (network video recorder) on the Camius View smartphone app, please check the below:

1 – Check if you are using the latest version of the Camius View app

On the App’s ‘Devices‘ page, make sure your recorder is added using P2P (ID) instead of IP (IP Address), and if in doubt, delete it and add it again. 

In the Media Port, make sure to enter the right port number:

2 – Make sure you’re connected to a reliable network on your phone 

3 – Check if your Camius IP camera or recorder is connected correctly to the LAN (Local network).

4 – Check for the IP address conflict

5 – Reset the Network settings of your Camius device

Navigate to Setup >> System >> Maintenance >> Load Default >> check the Network box and Apply

Camius Trivault DVR (local interface via HDMI)

Web browser view

6 – Check the Camius device network status 

Navigate to Setup >> System >> Information and check the Network Status if it shows ‘Connect success’.

If the above steps don’t help, submit a support request and include the device model number and the current ’Firmware/Software Version,’ which can be found using the Camius Device Config Tool

HDMI interface: DVR / NVR information is available under Setup >> System >> Information

Web browser view: information is available under Remote Setting >> System >> Information (web browser view)

7 – Wrong Password 

Before you add the Camius security device to the app, make sure to set a password  following the below setup guides:

We got you if you lost your IP camera or DVR NVR recorders password. Follow the below links on how to reset your device password:

You can not set a password on your Camius device using the Camius View app. 

Can I install an SSD hard drive instead of a regular one on my Camius DVR and NVR? 

The answer is ‘Yes.’

Camius recorders are compatible with 3.5″ and 2.5″ SATA (Serial Advanced Technology Attachment) and SSD hard drives (Sold-State Drive). 

Can I install an SSD hard drive instead of a regular one on my Camius DVR and NVR?  3

How to disable menu logout on the DVR and NVR?

Certain Camius device users prefer to remain logged into the menu of their DVR or NVR without re-entering their login credentials unless necessary. To achieve this, you can follow the steps outlined in this guide.

Move the mouse cursor to the bottom left, and click the main menu button: Setup >> System >> General >> Menu Timeouts >> Off >> Apply.

Optionally, you can set a different time for menu log-out as well. This guide applies to Camius NVR and DVR recorders.

It’s important to note that the web browsers will log you out of the session after some time (even if you set the number of sessions), as this function is implemented by the web browsers to enhance security.

To assist you in managing your login details more conveniently, consider using a password manager such as LastPass or similar services with browser extensions available. These services can help you securely store your login information (such as IP address, username, and password) and provide easy access even after your browser session expires.

You can also use VMS software on your desktop to add the DVR using a P2P ID and access the DVR’s ‘Remote Setting’ within the VMS; follow this guide on how to add the DVR to the software.

How to add IP cameras on a network that are not connected directly to the NVR’s PoE ports?

For the PoE-enabled NVR, connect Camius IP cameras via the internal NVR’s PoE ports and/or external LAN (WAN) port using the below-described model 2 or 3:
.

Camius PoE NVR is optimized for Camius PoE cameras making the whole setup process plug-and-play; the NVR assign a unique IP address to each Camius PoE camera and adds them automatically.

NOTE: Connecting multiple cameras via a switch or router to the PoE port is not recommended. One PoE port supports one IP camera.

The below steps are based on the NVR’s local interface via HDMI video output. Navigate the mouse to the screen’s left bottom corner and click on Setup, followed by Channel >> IP Channels.

In the below menu, you configure the connection of wired IP cameras.

Click Search to search for IP cameras from a local network, click Add to add an individual IP camera, and click Add All to add all IP cameras.

Below we will describe a few ways to add IP cameras from a local network using an external LAN (WAN) port.

IP channels menu description:

Select the suitable Protocol from the dropdown (Private is for Camius IP cameras), enter the IP camera(s) credentials (User Name and Password), and click Add. Green status indicates a successful connection; grey status could show a password or network error.

Green color State means the camera is added to the NVR

Grey color state icon means the IP camera failed to connect to the NVR. Click the gray icon to show the failure reason:

Option 1 – Adding IP Cameras to the NVR within the LAN (local area network )

If you want to connect to an IP camera from LAN (Local Area Network), please make sure your NVR is well-connected to the LAN and the IP camera you want to add is in the same network segment as your NVR.

If you want to add all channels manually, click the dropdown arrow next to Switch Mode and select “Manual.” 

If you want to add an individual channel manually, click the Edit Pencil-shaped icon in the Channel list, and then click the drop-down arrow next to Switch Mode to select “Manual” and click OK to save.

Option 2 – Adding an individual IP camera in the LAN (Local Network area)

STEP 1- Click the Search button; all available cameras in the LAN will be displayed, 

Optionally you click the Add plus-shaped green icon  in the IP channels list to add a camera to an individual channel. Click the Search button to show all available cameras in the LAN.

STEP 2 – Select the camera you want to add and then click Add button. Next, insert the user name and password of the camera and click Add button.

STEP 3 – You will see the added camera in the IP channels list

Option 3 – Add Multiple IP Cameras within the LAN

STEP 1- Click the Search button to display all available cameras in the LAN click Add All button, and the NVR will search & add all available cameras in the LAN.

STEP 2 – Select the cameras from the search result and click “Add.” You would need to input the username and password of the cameras. Please ensure all the cameras you want to add use the same username and password. Otherwise, the cameras with different user names and passwords cannot connect.

STEP 3 – The added cameras will show up in the channel list.

Option 4 – Add IP Cameras from another NVR in the same LAN (Local Area Network)

The NVR allows adding IP cameras from other Camius NVRs in the local network.

STEP 1 – Click the Search button to display all available devices in the LAN. There is an Edit icon (blue plus)  if the device is an NVR.

STEP 2 – Click the Edit icon (blue plus) and select the camera channels one by one or check the box to select all cameras. Click the icon X to go back to the Search list.

STEP 3 – Select the NVR in the search list and click the Add button.

STEP 4 – Input the Username and Password of the NVR and then click Add button

STEP 5 – The added cameras will be displayed in the channel list

Option 5 – Add IP Cameras from the Internet

If your NVR is connected to the Internet, you can add cameras with a WAN (Wide Area Network) IP address.

STEP 1 – Click Add button on the search page.

STEP 2 – Input the IP address or Domain name, Alias (name of the IP camera), Port, Protocol (choose the protocol of the IP camera from the dropdown menu: Private, Onvif or RTSP), User Name & Password of the IP camera.Tap the Add button to add the camera.

To avoid network issues, make sure that your camera, NVR, and router are on the same IP address segment, e.g.

.

How to configure Camius NVR using a web browser?

To quickly find the Camius DVR (digital video recorder) or NVR (network video recorder) IP address, visit camius.com/support to download and install the Camius Device Config Tool.

Web browser access

Click on the Camius NVR or DVR’s local IP or type it into your browser’s address bar. The latest Camius surveillance security camera recorders work with multiple web browsers, including Edge, Google Chrome, Mozilla Firefox, Edge, and Safari, and include the following models:

Use your admin username and DVR or NVR password to log in. Your recorder’s Configuration is under Remote Settings.

You can check the ‘Web Compatibility Mode‘ in the Camius NVR/DVR and even IP camera settings (this can be done from the Camius recorder’s local user interface (Via HDMI/VGA) and in the web browser viewer.

The below picture is based on the IPVAULT1128PR’s web browser view

Accessing web client through VMS software

For certain Camius DVRs, NVRs, and IP camera models, we recommend installing the VMS Software on your Windows or Mac computer to access the device’s remote settings since the VMS software has a built-in web client using the P2P ID. Here is the link to the guide on how to add the device to the VMS software. This applies to Camius IPVAULT2320P16N, SCOUT20PTZ, GUARDMA

.

.

Upgrading your security system is essential, whether for residential or business purposes. The following guide will help you understand why you need to upgrade your outdated security camera and recording system, along with the best options for upgrading your system.

Why You Need to Upgrade Outdated Security Camera System

Why is it so important to upgrade your security system? The following are the most significant reasons to upgrade your security camera and overall system as soon as possible.

Digital is replacing analog security systems:

While some systems still use analog, analog systems are no longer as common due to advances in digital technology such as IP camera systems. Digital IP camera systems have benefits such as being more cost-effective, having higher data retention rates, and so on. Older analog systems are beginning to reach the end of their technology life and will likely be obsolete within the next decade.

IP camera systems have a more stable end result:

When compared to previous old security system cameras, IP camera systems provide a much higher-end video result. This is due to features available in new security camera products, such as more advanced zoom options, automatic image stabilizing, and more. When it comes to providing security footage, you definitely want to ensure that your surveillance system is securing the highest result possible.

IP camera systems have a more stable end result:

IP CCTV modern technology solution comes with the unique ability to connect to other types of modern technology. Many modern IP camera solutions can be integrated with other platforms, allowing you greater control over the system and a range of other useful options. 

Camius offers multiple customized plug-n-play IP camera systems:

 IP Camera Solutions:

When you’re ready to upgrade your security camera system and leave behind your outdated technology, you will want to consider what features or specifications meet your needs. The following are some popular IP camera solutions that you should consider.

IP Security Camera System Features:

Do you need any additional security features aside from camera monitoring? Some surveillance audio-video products, like the PoE Spotlight Security Camera, offer broad features that include: 2-way audio capabilities, motion sensors, built-in microphone, speaker, and even siren options; motion-activated bright spotlights; wide-angle lens for better coverage; color-based night vision; intrusion detection based on perimeter guidelines; and weatherproofing.

Wiring:

The Camius PoE security camera system requires a single network wire to run power, video, and audio. Such simple wiring makes the whole installation hassle-free and straightforward.

Connectivity:

You will also want to consider how easy it is to connect your new security camera to various security systems. The Camius PoE camera, for instance, comes with a unique “plug and play” connection which allows for quick, simple connections to the accompanying hybrid digital and network video recorder. 

Apps and Portability:

Camius security camera system options come with the Camius View app (Camius View (iOS) & Camius View (Android)), which provides access to all of your Camius security camera system directly on your smartphone. If you purchase IP security cameras with 2-way audio, that feature is also accessible through your smartphone app; you can even navigate features such as spotlights and a siren from the app. You can set up your security system push notifications based on video loss, detection, storage error.

Camius DVR installation and user guide

Read More : iDVR-PRO HD CCTV DVR Setup

Camius 4K NVR solutions:

With each Camius Network Video Recorder, you get a reliable, easy-setup solution that brings out the best in Camius advanced IP cameras for business and home security. 

Camius PoE security cameras:

Camius PoE camera range is comprehensive and meets various demands. Power over Ethernet technology, PoE for short, allows a PoE IP camera to power up with a network cable, giving the IP camera direct network access. Besides a stable network connection, PoE makes camera installation easier by requiring a single wire.

With a team of competent sales and technical support, Camius can help you not just learn about PoE cameras but select the best cameras for your surveillance requirements. 

If your security camera system is outdated, make sure to upgrade to a newer security camera system as soon as possible. Feel free to contact Camius if you need help to select the right camera solution for your needs

How to reset my DVR’s password?

If you forgot your recorder’s password, there are two ways to reset it.  

1 – If your recorder has a reset button, press and hold it for 10 seconds; you will hear an audible confirmation. This will reset all settings, including the password, but will not erase recorded footage on your hard drive. 

2 – If your recorder doesn’t have a reset button, contact us using an online form to receive a reset password: 

     a) The current date on the DVR’s interface. 

     b) The MAC address of the DVR, which you can find under the System Information tab. Click the (i) information icon at the bottom right of your DVR interface. You don’t need the recorder to be unlocked for this. You can also get the MAC on the Camius View app and the Camius Device Config Tool. 

.

Is my DVR / NVR recording? How to set up security camera recording?

This guide applies to Camius DVR (digital video) and NVR (network video) recorders. To confirm if your Camius DVR or NVR is recording, check the recorder’s front panel HDD LED. The red blinking light indicates the DVR or NVR is recording.

Check red LED on the recorder’s front panel

Recording Schedule

Then navigate to Setup >> Record >> Record Schedule to check each camera’s schedule.

By default Normal schedule is enabled, which stands for 24/7 continuous recording.

For the rest of the schedules, you need to select and save the recording type you need (Green is for Normal, Yellow is for Motion, Purple is for PIR (applicable to Camius 4K spotlight cameras with PIR sensor), I/O is for recording triggered by external alarm devices connected to the DVR or NVR).

This picture shows the IPVAULT2256PR (16 channel PoE NVR) with only Normal and Motion Record Schedule enabled

IPvault1128PR (8 channel NVR) has all 3 record schedules enabled

Trivault DVR has all 4 record schedules activated.

Set the Record Schedule, apply, and copy to other channels if needed. Once it’s done, you will have access to the recording of the event not only on your NVR but you can also play them on your CAMIUS VIEW smartphone app.

Suppose you enable push notifications triggered by Motion, PIR, or AI (Human & Vehicle Detection) but do not have a short clip for playback. In that case, the record schedule was not set for this camera.

Optimizing storage and extending recording period

Camius 2K and 4K cameras can be set by the Camius NVR to record at 4K, 2K, 1080P, or 720P.

You can reduce hard disk usage by reducing the bitrate for low-foot-traffic cameras from 4096 Mbps to 2048 Mbps, which can double the total recording period. Recording settings are available under the Mainstream

Moreover, you can select the Video Encode type (depending on the IP camera’s supported compression types), disable Audio recording,

To see the Recording information, navigate to Setup >> System >> Information >> Record Info.

How to check the HDD status and format it

How to set the Date and Time on your Security DVR or NVR Recorder

If you set Date and Time on your new DVR or NVR, go through Startup Wizard >> Date and Time.

Synchronizing your recorder’s internal clock with your local Date & Time is essential; here are the steps:

1- Set your local time zone relative to GMT, for example, with Daylight Saving On:

2- Set the date, time, and formats manually.

3- We recommend enabling NTP (Network Time Protocol), which synchronizes date & time over the Internet. Click the checkbox, choose one of the servers, and click Update Now.

4- Enable DST for Daylight Saving Time. Once done, click Next.

Start Wizard view

To change Date and Time in the NVR’s menu, navigate to System >> General >> Date and Time. 

Once you set the correct time on your NVR, click Apply to save settings

How to back up recorded CCTV footage on the NVR or DVR?

The Search function provides you with the ability to search and play previously recorded audio-video footage and snapshots that are stored on your Camius DVR or NVR recorder’s hard drive. You can play videos that match your recording schedule, manual recordings, or events only. Additionally, the Backup function allows you to save important events, including both audio-video recordings and snapshots, to a USB thumb drive.

Click on the playback icon on the bottom menu bar.

The quick tool bar has icons to help you navigate through the NVR / DVR’s menu

Backing up CCTV footage requires a USB thumb drive.

Backing up CCTV footage requires a USB thunb (flash) drive. On the playback search page, click on the events tab, select the date, type, and channels, and then click the Search button.

1 – To save a video clip backup, insert your USB thumb drive into the Camius DVR or NVR’s USB port and start playing the recorded video. USB ports are on the front and rear panels of the DVR and NVR recorders. 

8 Channel NVR (click here to view)

8 channel DVR (click here)

16 Channel DVR (click here)

16 Channel NVR (click here for more)

32 Channel NVR (click here)

2 – Select the icon 

3 – Check the Channel(s) you want to backup and move the mouse cursor to the timeline where you want to start the clip.

4 – Press and hold the left mouse button and drag the cursor to the timeline where you want to end the clip. 

The clip icon

will change to an icon

, which you can click to save the clip.

5 – Select one or multiple event thumbnails, click the Backup button at the bottom, choose .MP4 (recommended), then click Save

Make sure your USB thumb drive has enough space to save the video clips.

6 – Select a folder on the thumb drive, and click OK. The progress bar at the bottom of the window shows you the progress of the backup.

Video Player Software

Download Video Player Software

In this article we will see how to configure an ALARMBOX in the recorders X-SECURITY

:XVR -VS2, -H and -HEVC.

For this tutorial we have used the following references:

XS-XVR6116-4KL-HEVC + XS-ALARMBOX16-6 + XS-PIRW-2EHAC.

Very important, the recorders must be updated to the latest version of firmware available, it is essential.

Step 1: Access the recorder and select the option “ALARM”

Step 2: Access the “ALARM INPUT” option

After accessing this option, we have the possibility to check the status of the ALARMBOX and be sure that it is working and also check which is its address.

3rd Step: Once the Alarmbox status has been checked, we are going to configure the HDCVI alarm.

In this case, as we are using a camera with PIR (in our example the XS-PIRW-2EHAC) we enable the HDCVI Alarm and then we will proceed to make the linkage with the desired alarm output.

In this option, we can configure the period in which the alarm is going to work, to which alarm output we can associate the event of the selected channel, configure the PTZ of another channel and, in advanced options, we can choose other options such as send e-mail, send a beep, send messages, and so on.

Step 4: Connect the alarm output by clicking on ALARM OUT.

If we had more than one Alarmbox, we would have to choose the corresponding one (up to 4). In this case we leave selected the Alarmbox 1 and the Alarm 1 output.

After these steps, the alarm output 1 of the Alarmbox will automatically be activated when the XS-PIRW-2EHAC detects motion.

Remember that this example is basic, we could go further and perform other actions that can be comfortably explored in the ALARMBOX configuration menu.

RTSP stream in X-Security – Dahua

The general form of the RTSP chain in brands such as X-Security and Dahua is:

rtsp://<user>:<password>@<ip>:<port>/cam/realmonitor?channel=1&subtype=0&unicast=true

For example: <rtsp://172.18.2.210:554/cam/realmonitor?channel=1&amp;subtype=0&amp;unicast=true>

To take advantage of the MJPEG format:

http://<user>:<passwrod>@<IP_address>/cgi-bin/mjpg/video.cgi?subtype=1

To play a video video:

rtsp://<user>:<password>@<ip>:<port>/cam/playback?channel=<num canal>&starttime=<initial>&endtime=<fin>>

If what is required is to add an mjpeg video stream on a web by http, click here.

Ports used by Dahua and X-Security’s P2P Service

These are the outbound ports used by Dahua and X-Security teams to connect to the P2P cloud.

.

P2P Relay Service Port: 8900-8903 TCP Port

P2P Server Service Port: 8800-8803 TCP/UDP Port

P2P AS Service Port: 12366 TCP Port

WEB Service Port: 80 or 443 TCP Port

GMS Service: 8180 TCP/UDP Port

+ALL UDP ports

.

The servers involved in Dahua’s P2P service are www.easy4ipcloud.com and www.easy4ip.com.

X-Security installation and user guide

Read More : How To basic setup of Hikvision NVR

Reset of IP Dahua and X-Security cameras via mobile app and reset boton

Web user interface of the IP Camera

1. Type the IP of the IP camera into a web browser

.

2. Click the ‘Forgot password?’ option

.

3. A prompt will appear to confirm the reset

Select OK

.

4. A QR code will be displayed.

This code must be scanned using the mobile app, either iDMSS or gDMSS on a mobile phone

The Security Code will be sent to the email address that was set during the device’s initialization; the email will be shown partially below the QR code

.

On iDMSS / gDMSS

1. Open the iDMSS / gDMSS app

Select ‘Me’ in the lower right portion of the screen

.

2. Select ‘Password Security’

.

3. Select ‘Reset Device Password’

.

4. Scan the QR Code from the Web UI of the IP Camera

.

Once scanned, after a few minutes you will receive an email with a Security Code

5. Enter the Security Code into the Web UI of the camera, then select Next

.

The camera’s password will be reset and you will be able to set a new password for the device

Reset via Physical Button

Depending on the model of your IP Camera, there could be a physical reset button on the outside body of the camera, or inside the camera body

1. Reset: Press the reset button for 5 seconds

2. Serial port connection: Please use connector and weld it on the package of the serial port

The picture below regards the cable coming out of the camera; you need an extension cable to
do the reset. Shortage the Blue wire (RESET) and the Orange wire (GND) for at least 5
seconds until the camera restarts

The pictures below are the sample of multi-function cable, and the reset is a button. (The
appearance may not exactly the same)

There is also a multiple-function combination cable for even earlier models; the reset terminal goes together with the alarm terminal (you can find the identifications on the label), you need shortage the RESET and GND pin (7&6 in the picture below) for at least 5 seconds to make a reset.

The reset button is inside of the camera, open the lens cap and you will find it.

The reset button is inside of the camera, open the dome camera enclosure; you will find it
next to the alarm terminals (see the picture below).

The reset module is inside the camera, open the dome camera enclosure and you will find it

The reset button is inside of the camera, open the dome camera enclosure and will find it
under the IR board (see picture below)

This type of network camera is very simple and small, and there reset button is mostly on
the back or side of the camera.

More models:

IT IS POSSIBLE THAT SOME MODELS DO NOT HAVE THE BUTTON TO BE ABLE TO DO THE RESET, IT WILL BE ENOUGH TO MAKE A BRIDGE WITH SOME CLAMPS DURING 20 SECONDS

How to activate or deactivate visible light LEDs in X-Security

In the following example we show a camera that has leds, which we can leave in three states:

Always off, day or night:

Always on:

Switching to day/night mode according to the lighting level, which is the default option:

Where to change the storage calendar of recordings in X-Security

For example, to change the parameter to 30 days, we need to set the Basic–>Setup as shown in the image below:

How to access X-SECURITY video recorders via P2P on a mobile application

First we must access the NETWORK menu of the recorder:

Step 1 – We will access the P2P SETTING menu.

Step 2 – We will check the Status box.

Step 3 – We will have to check that it appears as Connected.

Step 4 – Scan the QR code.

Step 5 – Save the operation.

.

.

.

APP MOBILE:

For this guide we have used the gDMSS PLUS app, however the procedure is the same for iDMSS PLUS and SmartViewer.

.

Open the mobile app

In the initial screen, we select the upper left icon (Home).

.

Before choosing the upper right option that will automatically open the mobile phone camera.

Then press “DEVICE” and then select the + symbol to add devices.

Then, pressing SN/SCAN, both options will take us directly to the camera to read the QR code of the recorder, taking us to the next screen of the mobile app

.

We scanned the QR code.

Then the mobile app will ask us what kind of devices we are adding:

In our case we choose ENGRAVER.

The next step is to check user and password.

Check that the P2P option is still marked in “Add Mode” and then press OK to save.

.

After this we will have the images of the recorder.

Checking and Updating Firmware on X-SECURITY Recorders

In this guide we are going to indicate the necessary steps to check and update the firmware in the X-SECURITY recorders, both in the firmware version V3.2.

For this update we will use the Internet Explorer and we must install the plugins of the recorder to the web browser.

Access the recorder and then go to INFO

First we have to check the model of the recorder and the firmware version that is currently installed.

Then we go to the Visiotech website and look for the recorder, in this case the XS-XVR6104, click on Downloads and then apply the FIRMWARE filter.

Our recorder currently has the firmware System Version: 3.210.0001.3, Build Date: 12-12-2016 and the Visiotech web version is System Version: 3.218.0000002.5. Therefore we proceed to download the firmware:

The download file is a .zip file, so let’s unpack it. The file we are interested in for the update via web is the .bin file.

Then go back to the recorder, press CONFIG / SYSTEM / UPGRADE and then look for the file you have downloaded by pressing Browse.

Once the file is selected, we proceed to finish the update by pressing UPGRADE.

To update the firmware of an X-SECURITY recorder with Firmware version V4.0.X or higher, the procedure will be the same, however, it changes a little the interface of the recorder.

For this procedure we will also use Internet Explorer as a browser to access the device and perform the update.

After accessing the recorder the first thing to do is to check the firmware version, press Management on the upper left side.

Then we choose INFO.

We see that the recorder is the XS-XVR6208-4KL-HEVC and the firmware version is System Version: V4.000.0000001.13, Build Date: 2019-01-24.

We download the most recent version from the Visiotech website and proceed to update.

In the option MANAGEMENT / SYSTEM / UPGRADE

Press Browse and look for the file that has been downloaded from the Visiotech website.

Remember that the file is a .zip file and you will have to unzip the files contained in it; the update file we are interested in for this procedure is the .bin file.

Once updated, we can check again the version to have the confirmation that it was successfully updated.

How to access an X-SECURITY recorder via Web with a P2P connection

We already know that many parameters can only be changed from the web interface of a recorder or directly on the recorder itself.

.

The problem starts after an installation is finished and the recorder is added to our SmartPss only by P2P.

.

Many times we are unable to open the ports on the router because we do not have access to it, but it is possible to access the recorder via browser to change certain parameters only with P2P access.

.

1 – ADDING THE P2P RECORDER TO THE SMARTPSS

.

1 – Define the name of the recorder

2 – Choose the method by P2P

3 – Enter the Serial Number of the recorder

4 – Leave the Default Group or choose a group created previously

5 – Enter the user

6 – Enter the user password

.

.

Check that the IP is that of the LocalHost, however the port is a random one; in each connection we will have a different port, but this does not prevent us from making the configurations via web interface.

.

.

Some operations such as adding an IP camera by custom protocol is only possible via web interface (in remote), from the smartpss instead is not possible.

reset button XS-IPSD8130IA-4

The button can be found by following the image below:

.

How to enter the OSD menu of X-Security / Dahua 4N1 or HDCVI cameras

The first thing to emphasize is that the OSD menu cannot be accessed using CVBS video technology, which implies that with a traditional composite or analog video format we will not be able to access the OSD menu.

To be able to access the device, the camera must be in HDCVI, HDTVI or AHD format.

If it is in CVBS format we must use a PFM820 control switch, interposing it between the camera and the recorder, and switch the format to HDCVI or HDTVI preferably.

A recorder or a tester is required to access the menu:

With a recorder you can access from local with a mouse and screen or from the web interface, accessed through the PTZ controls.

If the device does not allow us to enter with the configuration button, we have to try clicking on the Iris + button.

2 MB Download

.

Separate outputs in X-Security

Usually we are going to find VGA and HDMI video outputs, which normally show the same information, but there are also some models that allow to display different video signals (independent outputs).

The independent output function in X-Security / Dahua is normally available when the device has 2 HDMI outputs.

This wiki explains everything related to the topic:

https://dahuawiki.com/NVR/Basic_Setup/Dual_HDMI

And following its explanation, only the main output lets us have control (i.e. it provides the menu tabs) although it is possible to add additional information to the secondary monitor.

​

If, instead, we talk about a spot-type output (typically they have BNC-type connectors), this third-party YouTube video explains exactly that once a specific output is marked as a spot, menus no longer appear in it.

https://www.youtube.com/watch?v=UKp8Jh46iVk

How to change video technology in XS-SD6325SIW-F4N1 cameras

What do the X-Security XVR IoTs need to be able to link accessories?

https://www.visiotechsecurity.com/es/productos/cctv/hdcvi-iot

A PFM871A-N1 connection dongle is required: https://www.visiotechsecurity.com/productos/cctv/hdcvi-iot/accesorios-297/pfm871a-n1-detail

There is also this camera can be used as a gateway XS-CV036-FHAC-IG: https://www.visiotechsecurity.com/productos/cctv/hdcvi-iot/camaras-295/xs-cv036-fhac-ig-detail

Connection of the second output of the X-Security Alarm Recorder

As it indicates the CTRL 12V supplies 12 volts in continuous. The circuit is Normally Closed (NC) and when the alarm is generated it goes from 12V to 0V.

Create face database in X-security

For this FAQ we have used an XS-NVR3116-4K-1FACE

Note:

This is only for XS-NVRxxxx-xx-xx-xFACE models

Database configuration

1.Open the recorder configuration web page and log in

2.Click on the AI video query and click on the feature configuration

3.Then Database > Face database configuration

4.Click Add

5.Enter name and ok

6.

7.To enter the database, click on the “i” under Details

8.

9.Click Batch Log

10.Select a folder

11.In the new window, select the folder containing the photos

12.Click the OK button

13.The new faces should load

14.When necessary, it is possible to edit the details

15.

16.To close and go back, click 

AI Face Search X-security with Firmware V4.0

X-security AI Face Search with Firmware V4.0

.

Note:

This is only for X-security recorder models with firmware V4.0

.

Search for faces

1.Open the configuration page in the recorder.

2.Click on the AI video query and function settings

3.

4.Click on AI

5.Select face detection

6.Select your criteria and click on Search (5)

7.

8.This may take some time depending on the recordings

.

Playback Face search

.

1.After the face search

2.Select the image of your choice for playback on the right

3.

.

Download the selected face search:

.

1.Select the files (faces) to be downloaded

2.Click Backup

3.In the new window, browse for the directory in which the video should be saved

4.Select Save, only for videos

5.File type for easy export (a player will also be downloaded along with the video)

6.Click “Backup” to download the video

.

Play the downloaded videos:

.

1.Open the SmartPlayer that is downloaded along with the video

2.When the player is open

3.Define the playback window (for this example we use all 4 windows)

4.Select the windows of the video to “play in”

5.Double-click on the video file on the left side

6.When more videos are selected, pause them and click the Synchronized Playback button (7), and then click the Playback button (8) again to make all selected videos play synchronously

7.

How to update X-security devices via Configtool found in ToolBox

1. Download and install Toolbox

Download link: – ToolBox

.

2. Via the ToolBox, open the ConfigTool

.

.

3. Check the version via the drop-down icon

.

.

4. Search for the device you need to update with the correct username and password (by default admin, admin)

.

.

5. Select the update file

.

.

6. Then click on the update button ​ ver imagen de abajo

USB devices with 3G/4G, WIFI supported by X-Security

Enabling line crossing or facial recognition in X-Security V4.001.xxx

For this example we have used the model: XS-XVR6108AH-2FACE

Firmware Version: V4.001.0000001.0, Build Date: 2020-09-08

.

By default it comes with the SMD option, which is an enhanced motion detection with human or vehicle detection. And with IVS & SMD, we enhance perimeter protection, area intrusion, line crossing, etc.

.

.

.

SMD, IVS and FACE menus

.

IVS:

.

.

SMD:

.

Facial Detection and Recognition (FACE)

How to activate audio in X-Security recorders

For this example we have used the model: XS-XVR6108AH-2FACE

Firmware Version: V4.001.0000001.0, Build Date: 2020-09-08

.

Selection of channels to be displayed in the default view, when connecting monitor to X-Security recorder

For this example we have used the model: XS-XVR6108AH-2FACE

Firmware version: V4.001.0000001.0, Build Date: 2020-09-08

.

By default all channels of the video recorder are displayed when the monitor and mouse are connected, in the default view.

.

To prevent all or some of the channels from being displayed, we have to modify the user group “user”, as this is the default group.

.

.

You will only be able to access all or part of the channels if you create a user group with privileges. Having to create a user within this group, we can also limit access within the channels that already have permissions.

.

Introduction

The TV-NVR1508 NVR is network video recorders that offer a standalone solution for managing IP cameras and systems. The built-in high-quality decoder can deliver 4K/ 5MP/ 3MP/ 1080p/ 720p/ D1/ VGA/ CIF IP camera streams. Each channel can be individually configured to record in SD or HD resolution to suit your needs.

The internal HDMI and VGA engine supports adaptive motion refinement technology, which provides HDMI output with maximum resolution of 4K and VGA output with 1080p resolution. The NVR can be easily installed in all environments through the TCP/IP network, and the support of Camera Search Tool and Web Services Dynamic Discovery (WS-Discovery) protocol allows for locating all the cameras on the network and can generate a preview thumbnail of each channel. The self-diagnostic feature can estimate remaining recording time and monitor

S.M.A.R.T status, network status, and other information.

Files recorded by the NVR can be exported to USB flash drive, or the files can be downloaded via Backup Manager, Remote Player, FTP client software, or Network Places. Mobile support for iOS, and Android allows for remote viewing of connected cameras at high frame rates. Browser-based live monitoring and video playback features are also supported.

The NVR also supports external METADATA device, such as POS, ATM, GPS, etc. METADATA can be embedded within videos and saved as a database where you can search for METADATA history according to content, date, and time.

TRENDnet Poe NVR Installation Guide

Release Links

• TRENDnet Cloud Recording, Remote Monitoring and Playback
• Tiandy NVR Full Installation Guide
• 2M DVRs installation guide

Features

• Standalone NVR

• Supports up to 4K UHD, and 1080p 120 FPS IP cameras
• Each channel up to 12 Mbps incoming network throughput
• 4K HDMI and 1080P VGA output
• Compatible with iOS and Android devices
• Metadata can be embedded into videos
• Supports Setup Wizard
• HTML5 streaming multiple browser supported
• P2P easy remote access supported

Trademarks and registered trademarks

Microsoft, Windows, Internet Explorer are registered trademarks of Microsoft Corporation in the U.S and/or other countries.

Adobe and Adobe PDF are registered trademarks of Adobe Systems Incorporated in the U.S and/or other countries.

JavaScript and all Java-based trademarks and logos are trademarks or registered trademarks of Sun Microsystems, Inc. in the U.S and/or other countries.

Linux, Macintosh, and Mozilla are registered trademarks of the respective holders.

Other names of companies and their products mentioned in this manual may be trademarks or registered trademarks of their respective owners.

Chapter 1 Stream

You will see the following screen through HDMI or VGA connection once you power on the NVR:

The information shown on the top of the screen is described as follows:

• Division/Sequential Name: Click to select a camera division to display.
• System Date/Time
• HDD: The top shows the current number of hard drives being used for recording. And on the bottom shows the storage capacity used.
• Network Status (Mbps): The top side Rx is received throughput in Mbps and the bottom side Tx is transmission throughput in Mbps. Circle color represents:

Green: Giga Orange: 100Mbps Red: Error Status

Note: This information is available depending on models.

Move mouse cursor slightly to display the NVR controls (as shown in the image below):

Below controls can be seen at the bottom of the screen:

Note: This information is available depending on models.

Below are NVR controls that are at the upper-left corner of the screen:

Chapter 1-1 Live

Live video will display on this page.

Chapter1-2 Play / Backup

Click calendar icon to enter the PLAYBACK page as shown below:

1.

2.

3.

Recorded Period: Recorded data duration

Month Picker: Select the month by clicking on the left/right arrow

Date Picker: Select a date by clicking on it

No recording

The date has recorded data

Current date

Selected data

1. Time Picker: Select hours/minutes/seconds by clicking on up/down arrow
2. Play Time: selected date/time for playback
3. Playback: Click to play the selected video recording
4. Cancel: Click to go back to playback page

Chapter 1-2-1 Playback

Please select a date and time from the calendar and time picker respectively, to start playing desired recorded video or alarm video to enter the Playback as following screen:

Details of the controls at the bottom of the PLAYBACK screen are described as follows:

Note: This information is available depending on models.

Chapter 1-2-2 Backup

If you need to back up recorded files, click the E] backup icon to enter the BACKUP page as shown below and select the backup range, channel number and the file format as desired.

Record Period 2019/12/15 01:00:00-2019/12/25 20:43:11 ^{1 2} Not Installed:

⁷ HD AVI & Estimate File Size

File Fur mot

⁹ Backup 10

Cancel

Click to enter NVR SETTINGS and click General on the top panel, where you are allowed to adjust system configurations of the NVR. The details of the tabs are described as follows:

Chapter 2-1 General

• Device ID: Assign an ID for the NVR to be controlled by the remote controller.
• Audio Out Volume: Adjust the volume of the NVR.
• Sound On Button Press: Switch on/off the sound when pressing remote control buttons.
• Last Boot Time: Shows the last time the system is rebooted.
• Automatic Logout: Log out automatically after 30 minutes of inactivity.
• Automatic Login: Specify user account to log on automatically when the system power on.

Chapter 2-2 Time

• Date/Time: Set the date/time of the NVR.
• Date Format: Modify the date display format.
• Time OSD: Switch on/off the time to be displayed on the screen.
• Time Zone: Change the time zone of the location where the NVR is installed.
• Time Sync Mode: Choose how you would like the time to be synced.
• NTP Server: Enter the NTP server you want to use.
• Time Sync Interval: Choose the interval for the time to be synced.
• NTP Status: The status of connection to selected NTP server will appear here.

Chapter 2-3 User

The NVR supports up to 15 sets of individual user settings (including default user administrator, operator, and guest), to which you can assign different access privileges.

• User: Enter the name of the user (applicable only to User01-12).
• Old Password, New Password, and Confirm Password: If you would like to change the password, enter your previous password and enter the new password and confirm the password. Press Show to reveal the password.
• User Permission: Set the access privileges of the user to administrator, operator, or guest.
• Load Default: Restore to the default settings.

Chapter 2-4 Storage

Chapter 2-4-1 HDD MGT

In HDD MGT, there are HDD format, file system defrag, check HDD malfunctioned blocks, and HDD periodic inspection. Select a desired HDD and click Format, File System Defrag, Bad Block Check, or Regular Check.

Regular Check:

Allows you to set the interval between system checks: Parameters: Click each device to enter the screen below.

System Reserve Ratio allows you to allocate the percentage of HDD space that will not be occupied by recorded files. In Mount Option, choose the writing mode for the hard drive.

Chapter 2-4-2 S.M.A.R.T.

The S.M.A.R.T. status of your hard drive is displayed in S.M.A.R.T., where you can run analysis (either short or extended) on the HDD. Choose between Short or Extended analysis and click Analysis to start the process. You will see HDD status, information, attributes, and event history under HDD S.M.A.R.T. Information.

Chapter 2-4-3 USB MGT.

Connect a USB device (flash drive or hard drive) to the NVR, and check the one you want to format under this page, and then click Format.

Chapter 2-5 Event

Chapter 2-5-1 System

The search field in this page allows you to search for specific event reports at different time and of different content. Press Download to export the event report, Reload to update.

Chapter 2-5-2 Operating

You can examine the operating status of different users under this page. Press Download to export the event report, Reload to update.

Chapter 2-5-3 Alarm

The event history is displayed in alarm log.

• Event Period: Recorded event duration.
• Search Time: Display search duration.
• Calendar: Select date to search
• Channel: Select channel number to search

Chapter 2-6 Maintenance

• Firmware Update: Choose a firmware file and click Update to proceed firmware update.
• Export Settings: Click Export to copy system settings to a USB flash drive.
• Import Settings: Click Import to apply a system setting that is stored in the plugged USB flash drive.
• Factory Reset: Click Reset to restore the system to the factory settings.
• Soft Reboot: Click to soft reset the system.
• Watchdog Test: Click to test the system watchdog function. This will reboot the NVR.
• Kernel Version: The kernel version of the system.
• Support: Click to open server execution log options dialog, record system execution details.

Chapter 3 Network

Chapter 3-1 General

Enter the required information in the fields:

• IP Mode: Select the connection type of the NVR from Static, DHCP, and PPPoE.
• IP Address: Enter the IP address you want to use, and press IP Test if necessary.
• Subnet Mask: Enter the desired subnet mask.
• Default Gateway: Enter the desired default gateway.
• Primary DNS: Enter the first priority DNS server.
• Secondary DNS: Enter the secondary DNS server in case the primary DNS is not available.
• Video Port: Specify a desired video port.
• HTTP Port: Specify a desired HTTP port.
• HTTPS Port: Specify a desired HTTPS port and configure HTTPS.
• FTP Port: Specify the desired FTP port.
• MAC: This is the MAC address of your NVR.
• PPPoE Account: If you choose to connect through PPPoE, enter the account name here.
• PPPoE Password: Enter the required password for PPPoE connection.
• PPPoE IP: Your PPPoE IP will be displayed here.
• Hotspot IP: Your hotspot IP will be displayed here.

Chapter 3-1-1 Configuring HTTPs Port

The DHD DVR series support HTTPs (Hypertext Secure Transmission Protocol) service. HTTPs is an Internet protocol that ensures the integrity and confidentiality of data as it travels between users’ computers and websites. When users visit any website, they want a secure and private online experience.

HTTPs can be regarded as the advanced security version of HTTP. The SSL protocol is added as a security certificate. Therefore, the website can prevent data thief from directly seeing the transmitted data even if they intercept the transmitted information by using the encryption on the agreement.

There are two options to set HTTPs service:

1. The first option is to create a free self-signed certificate by filling-in the blank field below. Then, click Create Self-signed Certificate.
2. The second option is to purchase an SSL certificate by filling-in the blank field below and click on Create Certificate Request. Then, click on the Export Certificate Request to download the request into a PC and use to apply for official certification. After purchasing the SSL certificate from a third party company, click on the Import Signed Certificate.

Import Signed Certificate

Chapter 3-2 Advanced

Chapter 3-2-1 TCP/IP

NVR supports three sets of virtual IP addresses. When TCP/IP is switched On, the NVR can access the camera or another NVR using the specific IP.

Chapter 3-2-2 P2P

1. When activated successfully, a QR code will appear on the screen, and you can access the NVR with Sentinel app by scanning the QR code.

• Enable: Choose On to activate the service.

Chapter 3-3 E-Mail