To view a video showing the firmware upgrade process, click here.

1.1 Open Wisenet Device Manager from a computer connected to the same network as the camera.
1.2 Click on ‘Search’.

2.1 Select the device
2.2 Click on ‘FW’
2.3 Select ‘FW Upgrade’

3. Click on ‘File Open’

Note: You can also click the ‘Download’ button to have Wisenet Device Manager download the necessary firmware files.

4.1 Browse for the correct Firmware File.  Note that a downloaded firmware file is typically in a ZIP file.  You will need to first unzip the firmware file so that you can locate the .IMG file.
4.2 Click on ‘Open’

5. Click on ‘Upgrade’

6.1 Wait until the Status shows “Success” and the New version of the firmware is displayed.
6.2 Click on ‘Close’ to finish.

VMS & ONVIF Supported Device Firmware Version

1. VMS Supported Device Firmware Version

You can search a supported device list for 3rd party VMS through the below websites.

– Genetec: https://www.genetec.com/supported-device-list

– Milestone: https://www.milestonesys.com/support/tools-and-references/supported-devices/

– WAVE: https://wavevms.com/resources/compatible-devices/

And, in this kind of list, you may be noticed that some specific version of firmware are listed.

It looks that specific version of firmware only can support for the VMS, but it is not.

All Hanwha cameras are basically backward compatible, so you can think of them as Latest Firmware or Higher versions can support the VMS properly.

Please use the latest firmware, and let us know if you have any issues with the version.

How To Wisenet Firmware Update

2. ONVIF Supported Device Firmware Version

You can search ONVIF certification for our Wisenet Cameras through the below ONVIF website.

ONVIF: https://www.onvif.org/conformant-products/

The certified version on the list could be an older version when you are searching ONVIF certification.

In that case, please request a new ONVIF certification for the latest version of firmware.

How to Security Systems Firmware Upgrade: A Comprehensive Guide

Learn how to perform a security systems firmware upgrade with our step-by-step guide. Ensure your security systems are up-to-date and running smoothly.

Table of Contents

1. Introduction to Security Systems Firmware
2. Importance of Firmware Upgrades in Security Systems
3. Types of Security Systems That Require Firmware Upgrades
4. Understanding Firmware and Its Role in Security Systems
5. Preparing for a Firmware Upgrade
   • 5.1 Backing Up Your Security System
   • 5.2 Checking the Current Firmware Version
6. Steps to Perform a Security Systems Firmware Upgrade
   • 6.1 Downloading the Latest Firmware
   • 6.2 Uploading and Installing the Firmware
7. Post-Upgrade Procedures
   • 7.1 Verifying the Firmware Installation
   • 7.2 Restoring System Settings
8. Troubleshooting Common Issues During Firmware Upgrade
   • 8.1 Firmware Update Failed
   • 8.2 System Incompatibility Issues
9. Best Practices for Maintaining Security System Firmware
10. The Risks of Not Updating Security System Firmware
11. How Often Should You Update Your Security Systems Firmware?
12. Automated Firmware Updates: Pros and Cons
13. Choosing the Right Time for a Firmware Upgrade
14. FAQs on Security Systems Firmware Upgrade
15. Conclusion

1. Introduction to Security Systems Firmware

Firmware is the backbone of any security system, acting as the bridge between the hardware and software components. It controls the system’s fundamental operations and ensures that all parts function harmoniously. Understanding what firmware is and its significance is crucial before diving into the upgrade process.

2. Importance of Firmware Upgrades in Security Systems

Upgrading your security system’s firmware is not just about keeping up with technology; it’s about ensuring your system’s integrity, performance, and security. Firmware updates often come with patches for vulnerabilities, new features, and improved compatibility, making them essential for maintaining robust security.

3. Types of Security Systems That Require Firmware Upgrades

Various security systems, including surveillance cameras, alarm systems, access control systems, and home automation devices, require regular firmware updates. Each of these systems relies on firmware to operate efficiently and securely.

4. Understanding Firmware and Its Role in Security Systems

Firmware is embedded software programmed directly into the hardware of a security system. It dictates how the system behaves, processes data, and communicates with other devices. Without regular updates, firmware can become outdated, leaving your security system vulnerable to new threats and inefficiencies.

5. Preparing for a Firmware Upgrade

Before starting the upgrade process, preparation is key. This involves several steps that ensure the system is ready for the new firmware.

5.1 Backing Up Your Security System

Always back up your system settings and data before initiating an upgrade. This precautionary step ensures that you can restore your system to its previous state if something goes wrong during the update.

5.2 Checking the Current Firmware Version

Knowing the current firmware version helps you determine whether an upgrade is necessary. Most systems allow you to check the firmware version through the system’s interface or accompanying software.

6. Steps to Perform a Security Systems Firmware Upgrade

Upgrading the firmware of your security system can seem daunting, but following these steps can simplify the process.

6.1 Downloading the Latest Firmware

First, visit the manufacturer’s website or use the system’s software to download the latest firmware version. Ensure the firmware is compatible with your specific model.

6.2 Uploading and Installing the Firmware

Once downloaded, upload the firmware to your security system via a USB drive, SD card, or through a network connection. Follow the on-screen instructions to install the update, and avoid interrupting the process to prevent errors.

7. Post-Upgrade Procedures

After successfully installing the firmware, some post-upgrade steps ensure everything is running smoothly.

7.1 Verifying the Firmware Installation

Check the system’s firmware version again to confirm that the update was successful. If the new version is displayed, your upgrade is complete.

7.2 Restoring System Settings

If the upgrade reset any settings, restore them from your backup. This step ensures your system functions as expected with the new firmware.

8. Troubleshooting Common Issues During Firmware Upgrade

Sometimes, things don’t go as planned. Here’s how to troubleshoot common problems during a firmware upgrade.

8.1 Firmware Update Failed

If the update fails, restart the system and try again. Ensure that the firmware file is not corrupted and is compatible with your system.

8.2 System Incompatibility Issues

Incompatibility issues can arise if the wrong firmware version is installed. Double-check the firmware version and the model of your security system to avoid this issue.

9. Best Practices for Maintaining Security System Firmware

To keep your security system running optimally, follow these best practices for maintaining firmware.

• Regularly Check for Updates: Set a reminder to check for firmware updates every few months.
• Enable Notifications: Some systems allow you to enable notifications for new firmware releases.
• Test System After Update: Always test your security system after a firmware update to ensure all components are functioning correctly.

10. The Risks of Not Updating Security System Firmware

Failing to update your security system’s firmware can lead to several risks, including:

• Security Vulnerabilities: Hackers often exploit outdated firmware to gain unauthorized access.
• Reduced System Performance: Over time, outdated firmware can slow down your security system.
• Loss of New Features: Manufacturers often add new features to firmware updates, which you’ll miss out on if you don’t upgrade.

11. How Often Should You Update Your Security Systems Firmware?

There’s no one-size-fits-all answer, but as a rule of thumb, check for updates at least twice a year or whenever the manufacturer releases a new version. This ensures your system remains secure and up-to-date.

12. Automated Firmware Updates: Pros and Cons

Many modern security systems offer automated firmware updates, but this feature comes with both advantages and disadvantages.

Pros:

• Convenience: Updates are installed automatically without manual intervention.
• Timeliness: Your system stays updated without delay.

Cons:

• Lack of Control: You may not have the opportunity to back up settings before the update.
• Potential Downtime: Automated updates can occur at inconvenient times, potentially disrupting your system’s operation.

13. Choosing the Right Time for a Firmware Upgrade

Timing is crucial when performing a firmware upgrade. Choose a time when your security system’s downtime will have the least impact, such as during off-hours or when the premises are unoccupied.

14. FAQs on Security Systems Firmware Upgrade

1. What is firmware in a security system?

Firmware is a type of software embedded into the hardware of a security system, controlling its basic operations and functions.

2. How do I know if my security system needs a firmware update?

You can usually check for firmware updates via the system’s interface or the manufacturer’s website. If your system is experiencing performance issues, it might be time for an update.

3. Can I revert to the previous firmware version if something goes wrong?

Some systems allow you to revert to the previous firmware version, but this is not always possible. Always back up your system before upgrading.

4. Will a firmware upgrade affect my system’s settings?

In some cases, a firmware upgrade may reset your system’s settings. It’s important to back up your settings before performing an upgrade.

5. How long does a firmware upgrade take?

The duration of a firmware upgrade varies depending on the system, but it usually takes anywhere from a few minutes to an hour.

6. Are firmware upgrades free?

Most manufacturers provide firmware updates for free as part of their ongoing support for the product.

15. Conclusion

Upgrading the firmware of your security system is an essential task that ensures your system remains secure, efficient, and equipped with the latest features. By following the steps outlined in this guide, you can confidently perform a firmware upgrade and maintain the integrity of your security systems.

Latest Chinese New DVR NVR Firmware

.

Step 1: Prepare for the Update

1. Check the Current Firmware Version:

2. Visit the Manufacturer’s Website:

.

Step 2: Backup Your Settings

1. Backup Configuration:

.

Step 3: Update the Firmware

1. Prepare a USB Drive:

2. Insert the USB Drive into the XVR:

3. Access the Firmware Update Menu:

4. Start the Firmware Update:

.

How to Update XVR Firmware A Comprehensive Guide

Step 4: Verify the Update

1. Check the Firmware Version:

2. Restore Configuration:

.

Troubleshooting Tips

1. Ensure Compatibility:

2. Stable Power Supply:

3. Follow Manufacturer Instructions:

4. Common Issues:

.

Conclusion

Regular firmware updates are vital for the smooth operation of your XVR, enhancing security features, and maintaining compatibility with new technologies. By following the steps outlined in this guide, you can confidently update your XVR firmware, ensuring your device remains up-to-date and fully functional. Always refer to your device’s manual for model-specific instructions and consult manufacturer support if you encounter any issues.

or alternative guide

Updating the firmware of your XVR (eXtended Video Recorder) is crucial for maintaining its performance, enhancing security features, and ensuring compatibility with new devices. Here is a step-by-step guide to help you update the firmware on your XVR device:

Step 1: Prepare for the Update

Step 2: Backup Your Settings

Step 3: Update the Firmware

Step 4: Verify the Update

Troubleshooting Tips

Conclusion

Regularly updating your XVR firmware ensures the device runs smoothly, maintains security, and supports new features or devices. Following the steps outlined in this guide will help you successfully update your XVR firmware with minimal hassle. Always refer to your device’s manual for specific instructions related to your model.

.

How to Download and Prepare Firmware

Description

This guide will show how to download and prepare the firmware file for a Dahua device.

Firmware files for Dahua devices can be found at Firmware by Device or the specific product page for the device

Firmware is typical provided in a ZIP file, a compressed file format

This file will contain the actual firmware file, which needs to be extracted from the ZIP file in preparation for the upgrade

Prerequisites

• Computer with internet access (to download firmware file)

• Dahua device

Video Instructions

Step by Step Instructions

Confirm the Model and current firmware of Dahua device

1. Enter the IP of the device into a browser

At the Web Login

Enter the Username and Password

Click Login

2. Click Info

3. Click Version

The Device Type will be displayed

The current System Version will be displayed

Download the firmware file for device from DahuaWiki

4. In a browser go to DahuaWiki.com

Under Specifications, Firmware, & Manuals

Click the device type (in this example Recorder)

5. Enter the device model into the field

6. The results will be filtered

7. Click the firmware icon to download the firmware file

8. The file will download

Extract the firmware file to local computer

9. Right click the Start Menu / Windows icon in the bottom left of the screen

Select File Explorer

10. Select Desktop

11. Click Home

Then click New folder to create a new folder to extract the contents of the firmware zip file

12. Find the created folder in the list, double click to open

13. Under the Downloads window of the browser, click ‘Show in folder’

A new File Explorer window should open containing the directory the firmware zip was downloaded to

Locate the file in the list

14. Right click

Select Cut

15. Select the window with the new directory

Right click in the window

Select Paste

The folder will appear in the directory

16. Right click the file

17. The contents of the zip file will appear in a new window

18. Click to select all files in the folder

Drag and drop the files to the created folder

The files will appear in the directory

The firmware file will appear in the directory ready to use

How to Reset Device to Factory Default

Latest Dahua firmwares 2024

Step by Step Instructions

1. From Live View

Right click select Main Menu

2. Under Setting

Click System

3. Click Default

4. Click Factory Reset

5. A prompt will appear to confirm the factory default

Click Yes

6. The unit will default and reboot

7. When the device has booted back up it will be factory reset and is now ready for device initialization

SystemUI New

Step by Step Instructions

1. From Live View

Right click, select Main Menu

2. Click Operation

3. Click System Maintain

4. Click Default

5. Click Factory Default

6. A prompt will appear to confirm the factory default

Click OK

7. The NVR will default and reboot itself

8. The unit will boot back up

9. The device has been factory reset and is now ready for device initialization

WebUI Old

Step by Step Instructions

1. Enter the IP of the device into a browser

At the Web Login

Enter the Username and Password

Click Login

2. Click Setup

3. Click System

4. Click Default

5. Click Factory Reset

6. A prompt will appear to confirm the Factory Reset

The unit will reboot and is now ready for device initialization

WebUI New

Step by Step Instructions

1. Enter the IP of the device into a browser

At the Web Login

Enter the Username and Password

Click Login

2. Click Setup

3. Click System

4. Click Default

5. Click Factory Reset

6. A prompt will appear to confirm the factory default

Click Yes

The unit will reboot and is now ready for device initialization

Firmware Update via USB Drive

Description

This page will show you how to update the firmware of your Dahua device via a USB drive at the recorder

Note: All devices should be “Factory Reset” once the firmware update is complete.

Prerequisites

• Dahua device

• USB drive with the firmware file for the device – Firmware by Device

SystemUI Old

Prerequisites

• USB Drive 1GB or more

• The proper firmware file for the device

• Physical access to the recording device

• A computer to load the firmware files onto the USB

Video Instructions

Step by Step Instructions

1. Download Firmware and copy to USB such as a flash drive ➞ Insert USB into recorders USB port.

2. It will prompt for option to upgrade, Click System upgrade ➞ Click Start.

3. Browse for firmware ➞ Open firmware folder is in ➞ Select Bin File ➞ Click Start. Device will reboot once finished.

SystemUI New

Prerequisites

• USB Drive 1GB or more

• The proper firmware file for the device

• Physical access to the recording device

• A computer to load the firmware files onto the USB

Video Instructions

Step by Step Instructions

USB drive with Firmware file should be plugged into USB slot on recorder

1. From the Main Menu, click Operation

2. Click System Maintain > Upgrade

3. Click the System Upgrade in the middle of the page.

4. Select the Firmware file from the list

Click OK

5. The firmware update will begin.

Make sure to not unplug the power during this process.

6. The NVR will reboot as the final step of the process

Firmware Update via WebUI

Description

This page will show you how to update the firmware of your Dahua device via the WebUI

Note: All devices should be “Factory Reset” once the firmware update is complete.

Prerequisites

• Dahua device with network connection

• Local Windows computer

• Firmware file for device downloaded to computer – Firmware by Device

Instructions

WebUI Old

Prerequisites

• Computer

• Internet

• Compatible Browser (Internet Explorer)

• NVR/HCVR/IPC

Video Instructions

Step by Step Instructions

Step 1: From IE(Internet Explorer) type in the devices IP address on the IE address bar → login with credentials.

Step2: Setup → System → Upgrade

Step 3: Click on “Browse” → Select correct firmware

• Click on “Upgrade”

• Device will reboot after upgrade is finished.

USB firmware Upgrade via web.

If firmware is on USB Device → Click on browse → Navigate to USB location → Select firmware → Open → Upgrade.

WebUI New

Prerequisites

• Dahua device with network connection

• Local windows computer

• Firmware file for device downloaded to computer

Video Instructions

Step by Step Instructions

1. Enter the IP of the device into a browser

At the Web Login

Enter the Username and Password

Click Login

2. Click Operation

3. Click System Maintain

4. Click Upgrade

5. Click Browser

6. Locate the firmware file

Click Open

7. Click Upgrade to begin the update process

8. A message will appear to confirm the upgrade process

9. When the upgrade is complete the device will reboot

Firmware Update via SmartPSS

Description

This page will show you how to update the firmware of your Dahua device via SmartPSS

Note: All devices should be “Factory Reset” once the firmware update is complete.

Prerequisites

• SmartPSS installed

• Device added to SmartPSS

• Firmware file downloaded to computer – Firmware by Device

Instructions

SmartPSS 2.002

Prerequisites

• SmartPSS installed

• Dahua device added to SmartPSS

• Firmware file for device downloaded to computer – Firmware by Device

Video Instructions

Step by Step Instructions

1. From the Main Page of SmartPSS

Click Device CFG

2. Click to select the device from the device tree on the left side of the screen

3. Click Upgrade

4. Click the folder icon

5. Locate the firmware file

Click Open

6. Click Firmware Upgrade to begin the firmware update process

7. A prompt will appear to confirm the upgrade process

8. A prompt will appear to confirm a successful upgrade

Firmware Upgrade via ConfigTool

Description

This page will show you how to upgrade the firmware of your Dahua device via ConfigTool

Note: All devices should be “Factory Reset” once the firmware update is complete.

Prerequisites

• Dahua device(s) with network connection(s)

• ConfigTool installed on a local computer

• Firmware file for device(s) downloaded to computer – Firmware by Device

Step by Step Instructions

Single Device Upgrade

1. Open ConfigTool and click on Search Setting at the top

2. Check the boxes for both Current Segment Search and Other Segment Search.
Enter the IP range for the device you are looking for in Start IP and End IP.
Enter the login information for that device in Username and Password.
Then click OK at the bottom

3. Click on Device Upgrade on the left.
Find the device you want to upgrade in the list and click on the Folder icon next to it under the Upgrade File Path column

4. Use the file explorer to find the firmware file on your computer and select it.
Then click on Open

5. Verify the file path is listed next to the device in the list.
Then click on the Upgrade icon to the right of the device in the Operate column

6. Click on OK

7. The progress bar will fill up as the device is upgraded

8. Once the device has been successfully upgraded you will see a Green Check Mark next to it in the list

Batch Device Upgrade

1. Open ConfigTool and click on Search Setting at the top

2. Check the boxes for both Current Segment Search and Other Segment Search.
Enter the IP range for the devices you are looking for in Start IP and End IP.
Enter the login information for those devices in Username and Password.
Then click OK at the bottom

3. Click on Device Upgrade on the left.
Find the devices you want to upgrade in the list and check the boxes next to them. (Make sure all devices you check require the same firmware.)
Then click on Batch Upgrade at the top

4. Click on OK

5. Click on Browse

6. Use the file explorer to find the firmware file on your computer and select it.
Then click on Open

7. Click OK at the bottom

8. The progress bars will fill up as the devices are upgraded

9. Once the devices have been successfully upgraded you will see Green Check Marks next to them in the list

Recorder Firmware Update via Online

Description

This page will show you how to update your Dahua Recorder online.

Note: All devices should be “Factory Reset” once the firmware update is complete.

When the NVR detects there is a newer firmware in the server, a ‘1′ icon will appear at the System icon.

The entire process takes about 5 minutes depending on network connection.

Prerequisites

• Dahua device that supports online update

• Internet connection to Dahua device

Instructions

SystemUI

Prerequisites

• Dahua device with internet connection

Video Instructions

Step by Step Instructions

1. From Live View

Right click, select Main Menu

2. Click Operation

3. Click System Maintain

4. The upgrade menu will show if a new firmware version is available

5. Click Upgrade Now to begin the update process

6. A prompt will appear to confirm that Surveillance will be paused during the upgrade process

Click OK

7. The firmware file will begin to download

8. After the download is complete the unit will automatically begin the firmware upgrade

9. The unit will reboot as the final step of the upgrade

10. Once the firmware update is complete the unit will reboot. A factory default is recommended after a firmware update

From Live View, right click Select Main Menu

11. Click Operation

12. Click System Maintain

13. Click Default

14. Click Factory Default

15. A prompt will appear to confirm the factory default

Click OK

16. The unit will reboot

17. When the unit boots back up it will be factory defaulted and ready for the Device Initialization process

WebUI

Prerequisites

• Dahua device with internet connection

• Local Windows computer

Video Instructions

Step by Step Instructions

1. Enter the IP of the device into a browser

At the Web Login

Enter the Username and Password

Click Login

2. Click Operation

3. Click System Maintain

4. Click Upgrade

5. The upgrade menu will show if a new firmware version is available

6. Click Upgrade Now

7. A prompt will appear to confirm that Surveillance will be paused during the upgrade process

Click OK

8. The firmware file will begin to download

9. After the download is complete the unit will automatically begin the firmware upgrade

10. Once the firmware update is complete the unit will reboot. A factory default is recommended after a firmware update

Enter the IP of the device into a browser

At the Web Login

Enter the Username and Password

Click Login

12. Click Operation

13. Click System Maintain

14. Click Default

Click Factory Default

15. A prompt will appear to confirm the factory default

Click OK

The unit will factory default and reboot

When the unit boots back up it will be factory defaulted and ready for the Device Initialization process

Index of /Firmware

.

.

How to Access Device from Web

This guide is valid for models 2MT-4004, 2MT-4008, 2MT-4088, 2MT-4016, 2MN-8004-P4, 2MN-8008-P8, 2MN-8116-P16, 2MN-8232-P16.

When devices are connected to the network, they can also be accessible from a computer. The first thing you need to make sure of is that the computer you are using and the DVR/NVR are connected to the same network (network is coming from the same router for both devices). You will first need to obtain the IP address of the DVR/NVR from Menu → System → Network → IPv4 address.

After noting the IP address of your device, open Internet Explorer and in the address search bar type in the DVR/NVR IP address. If the NVR and the computer are on the same network then it will pull up the login page of the DVR/NVR. The credentials will be the same as when you log into the local interface of your device.

2M DVR XVR Setup and User Guide

Read Also : Easily Connect IP Cameras Over Existing Coaxial Cabling

.

How to Find the Serial Number Using 2M Tool

Click here to download 2M Tool

2M Tool is used to find the IP address of your 2M NVR, DVR, or IP camera, as well as limited management of its settings. You only need to make sure that the computer you are using 2M Tool on is connected to the same network as the device that you are trying to search for.

Why do we need the serial number? The serial number is mainly used in case of a customer needing a password reset on their device.

How do we find the serial number? There are a few ways to find the number:

In the case that you forget the password for you device in which you will not be able to access the web page, and the camera is too high up to reach to find the sticker, you can use 2M Tool to find the serial number. 2M Tool does not automatically show the number; you must force it to show. First, you will need to click on the Settings icon to show the options:

Then another window will open where you can select Serial Number to show.

Once you hit OK, the serial number will then appear.

How to Install Plugin for Internet Explorer

This article features screenshots from our 2MN-8XXX series NVR and our 2MT-4XXX series DVR, but the same principle will apply to any other recorder. This is because each recorder requires a plugin in order to view the cameras on the web page. You will have to manually install the plugin, but it is usually always provided as a link for easy access.

First, you must make sure that you are using Internet Explorer. Internet Explorer is the only browser that can support these plugins. It is possible for some devices to be viewed on Google Chrome or even Firefox, but then other functions are very limited so it is highly not recommended to use those browsers. Once Internet Explorer is open, and you navigate to the device’s web page by entering the IP address, there should be a link shown on the page. You can see on the picture below that the link is located on the top of the page.

When you click on the link, a pop-up will appear on the bottom of the page that will let you choose whether to Run the program or Save the program onto your computer. Note: Running the program will not save it. If you wish to save the program, please select Save. Once it has finished downloading, then you can run the program from the file location.

If you choose to Run the program, an error message will appear noting that the publisher couldn’t be verified. This is no issue; the plugin will not cause any harm to your computer. Hit Run, and run the installation. Some installations will require you to close out of Internet Explorer in order to complete the setup.

Once the setup is complete, refresh the page, and another message will pop-up on the bottom that asks you to Allow the add-on to run. Select Allow, and log into the page. Now you should be able to view your cameras on the web page.

.

How to Set Up 2M Guard

2M Guard is the phone app that we use for our NVR’s to view cameras from our phones offsite.

This app only works for models: 2MT-4004, 2MT-4008, 2MT-4088, 2MT-4016, 2MN-8004-P4, 2MN-8008-P8, 2MN-8116-P16, 2MN-8232-P16 and our IP cameras.

2. Two ways to add a device onto the app:

Method 1: Adding Device Through Star4Live

Method 2: Adding Device Directly on the App

How to Set Up 2M Station

2M Station is the PC software to view your cameras on your computer on and offsite. This program only works with models: 2MT-4004, 2MT-4008, 2MT-4088, 2MT-4016, 2MN-8004-P4, 2MN-8008-P8, 2MN-8116-P16, 2MN-8232-P16, and our IP cameras

When first running the program, it will prompt you for a username and password which will be admin/123456 by default. It is recommended that you change the password after installation.

Once you are logged in it will show the menu. Click on Device Management to add any devices. On the left side make sure that Encoding Device is selected. It will show at the bottom of the screen any devices that are online as long as the computer is on the same network as the devices.

There are two methods to add an online device. The first method is fairly simple. All you need to do is check the box for the NVR that shows under Online Device and then click Add. The second method to adding an online device is to manually add it. First click on Add next to Managed Device, and it will open another window where you can input the details of your device. It will ask for:

After putting in all of the correct information of your device, click on Add and then the device should come online.

Another method to add a device is by using the P2P method which allows for a user to view their cameras offsite from any location. The device will be added as a Cloud Device instead of an Encoding Device.

It will show Login and Register buttons that will link to your Star4Live account which will show the devices you have previously added. After logging in, it will take a minute or two for the devices to show online. At first, it will say Offline (Connecting…), but eventually the status will show Online.

After successfully adding all of your devices, go back to the menu and click on Live View to view your cameras. A list of online devices will show on the left side of the window. Click and drag the device into the window view in order to load all of the video. If not all of the cameras are wanted in view, you can click on the plus sign next to your device and it will show a list of cameras connected to the NVR. You can click and drag specific cameras onto the live view screen.

.

How to Set Up Email Notifications Using Gmail

This is valid for models 2MT-4004, 2MT-4008, 2MT-4088, 2MT-4016, 2MN-8004-P4, 2MN-8008-P8, 2MN-8116-P16, and 2MN-8232-P16.

Gmail will have automatic security settings that need to be disabled before configuring email settings in the NVR. You will need a computer in order to edit these settings. First, log on to your Gmail account and then click on the square icon in the upper right corner of the page. Click on Account.

Security → Scroll to the bottom until you find “Less secure app access” → “Allow less secure apps: ON”

Now that Gmail has been set to allow app access, we can move on to the NVR settings. These can either be configured through the web page or through the NVR itself.

Through the DVR/NVR: Main Menu → Network → Basic → Email

Through the webpage: Setup → Network → Email

After you finish entering all of the settings and the test is successful go to Camera → Motion → Select Camera → Trigger Actions → Send Email

.

How to Share a Device

This is only valid for models: 2MT-4004, 2MT-4008, 2MT-4088, 2MT-4016, 2MN-8004-P4, 2MN-8008-P8, 2MN-8116-P16, 2MN-8232-P16 and our IP cameras

Each NVR can only be added by one account at a time, so if one wants to add a device onto multiple accounts they would need to share the device with one account being the “main” account. This means that one person will have the device added to their account and that person will share the device with other people. Each person still must have their own Star4Live account.

How to share the device is simple. First, you will need to log onto the main Star4Live account which the NVR has been added to. It can be done either through the computer or your personal phone.

Sharing from Computer: after logging into the account your list of added devices will appear. Click Share on the row for the device you are wanting to share.

Then a menu will appear to enter the account you want to share to, the Valid Till date, User Rights, and any Description you want to give.

Once all of the information has been correctly filled out, click Confirm to successfully share.

Sharing from 2M Guard Phone App: after logging into your Star4Live account on the 2M Guard app, go to your Devices and then tap on the device that you want to share. A small menu will appear. Then tap Share on the bottom of the screen.

The next window will show the device and a list of the cameras that are connected and online. You can choose specific cameras, or select the device so that the entirety of its cameras are selected for sharing.

Once your device(s) has been selected, the Share menu will finally appear. The app will ask for the same information as the computer does, but it will not give a space to fill out a description. Fill out the Share To and the Valid Period the same as you would do on the desktop instructions written above. The only other difference between the Star4Live browser and the app is the sharing Type: you will be able to choose between Role or Function.

NOTE: Only admin rights will allow another user to access the device through the web browser or through 2M Station because they both allow a user to make changes to the device. If you do not wish for another user to be able to make any kind of changes (viewing only), please choose the By Function type.

Once one of these methods have been completed to share the device, the recipient only needs to log into their Star4Live account and the shared NVR should show automatically under their own device list.

How to Sign Up for Star4Live Account

Star4Live is the server that we use to view NVR and camera footage over the web. Each customer needs to have an account to view and manage their devices.

This is only valid for models: 2MT-4004, 2MT-2008, 2MT-4088, 2MT-4016, 2MN-8004-P4, 2MN-8008-P8, 2MN-8116-P16, 2MN-8232-P16 and our IP cameras.

How to Upgrade the Firmware

This article applies to the models: 2MT-4004, 2MT-4008, 2MT-4088, 2MT-4016, 2MN-8004-P4, 2MN-8008-P8, 2MN-8116-P16, 2MN-8232-P16.

Every now and again, we will release a new firmware update that can either hold new features for your unit, bug fixes, or a bit of both. We have made it simple to request the newest firmware so that there is no need to wait for a file to be sent. First, you will need to make sure that your device is connected to the internet so that the NVR will be able to communicate with our servers.

Method 1: From the NVR Interface

Then you will go into the Main Menu and click on Maintain. There will be a section for Upgrade.

There are two options for upgrading:

You will most likely want to choose the Cloud Upgrade option unless you have received the firmware file from Tech Support beforehand. Click Cloud Upgrade, and wait for the device to finish its search. It will either notify you that the current version is already the latest, or it will show a newer version, and the Upgrade button will highlight at the bottom of the screen.

The upgrade time will vary between 1-5 minutes, sometimes lasting longer depending on the size of the update. Once the update has finished, the device will automatically restart. It will be ready to use again once it has fully finished the reboot.

Note: Please make sure that the device does not disconnect from the network or from power because it can cause a risk in damaging the unit if there is a failed update.

Method 2: From the Web Interface

The NVR can be updated from its web page if there is no monitor connected to the unit, or if it cannot be physically accessed. From the web page, you will navigate to Setup → Maintenance → Maintenance → Cloud Upgrade → Detect or Check for Update. The process is the same as it is from the unit itself, and the same rules will apply.

How to Use Star4Live

Star4Live is the server that we use to view NVR and camera footage over the web. Each customer needs to have an account to view and manage their devices. You must use Internet Explorer in order to access all of the functions of Star4Live.

This is only valid for models: 2MT-4004, 2MT-4008, 2MT-4088, 2MT-4016, 2MN-8004-P4, 2MN-8008-P8, 2MN-8116-P16, 2MN-8232-P16 and our IP cameras.

What software do I use to view my cameras on my PC, and where can I download the software?

2M Station: 2MT-4004, 2MT-4008, 2MT-4088, 2MT-4016, 2MN-8004-P4, 2MN-8008-P8, 2MN-8116-P16, 2MN-8232-P16

Windows Download Link
MAC Download Link

What phone app do I use to view my cameras?

.

There are two possible ways to reset the password with the new firmware. However both need the person to access the NVR either by being in front of it or by access in on the computer (entering the IP address on the browser). The screenshots shown on this guide will be the ones we can get on the NVR itself:

Bring up the login screen by right-clicking anywhere and clicking on the “Menu” option. When you see the login screen, click on the “Forgot Password” link:

After that, either 2 types of screens will come up: The first one is to enter an email address to get a new temporary password:

Please enter a valid email address to get your new temporary password:

The second type of screen is the same as the one it will show when we click “Next” after entering the email address:

2MN NVR XVR Troubleshooting 2024

Read Also : Xmeye Dvr System Instructıons For Use

When you reach this screen, you can follow one of the following options:

Option 1:

If you have downloaded the 2M Guard App for your phone, you can do the password reset yourself.

Click on the “Local Config” option:

Click on the “Forget Device Password” option and scan the QR code on the NVR screen:

After that, a message will appear saying that the temporary password will be sent to the registered email address:

Click on “OK” to send the password and wait for the confirmation page:

Click “OK” again and wait. The email will look like this:

Take note of the security code and enter it on the “Security Code” field of the Retrieve Password screen (The security code is case sensitive, this means that upper and lower case letters matter):

After entering the security code, press “Enter” and press “OK”. After that, a new pop-up screen will appear to enter a new password on the “Password” field. Don’t forget to enter the same new password on the “Confirm” field:

After that, click on “OK”.

Option 2:

If you don’t have the 2M Guard App downloaded, you can take a picture of the QR code shown on the “Retrieve Password” screen. Here is an example of the picture you should take.

After you take the picture, please contact Technical Support to receive more instructions. We will do the password reset using the QR code picture taken.

NOTE: Please do NOT exit from the “Retrieve Password” screen after you take the picture of the QR code. The security code only lasts for a day, so please keep that in mind before starting a password reset process.

.

How to Access Device from Web

This guide is valid for models 2MT-4004, 2MT-4008, 2MT-4088, 2MT-4016, 2MN-8004-P4, 2MN-8008-P8, 2MN-8116-P16, 2MN-8232-P16.

When devices are connected to the network, they can also be accessible from a computer. The first thing you need to make sure of is that the computer you are using and the DVR/NVR are connected to the same network (network is coming from the same router for both devices). You will first need to obtain the IP address of the DVR/NVR from Menu → System → Network → IPv4 address.

After noting the IP address of your device, open Internet Explorer and in the address search bar type in the DVR/NVR IP address. If the NVR and the computer are on the same network then it will pull up the login page of the DVR/NVR. The credentials will be the same as when you log into the local interface of your device.

How to Use the Check Template to Create Schedules

The check template supports a time range-based authentication mode with a maximum of eight time ranges available per day. This is useful if a company only wants to allow employees to enter when their shift is supposed to start and not outside of those hours.

First, you will need to create the time schedules for each day. This is done in the Check Template page under each Time Interval. You can create up to 8 different intervals per day, but it is not necessary to use all eight. You must also choose a checking method for each time interval: card, face, password, card + face. Each day of the week can have the same schedules or you can create different schedules for different days. If you choose to have the same schedule for all days, or for multiple days, just Copy To at the bottom of the screen and Copy.

Once all of the desired time intervals have been added, name the template so that it can be easily defined, and click on Save.

Now that the template(s) have been created, we need to assign each group to a schedule. Go to the Face Library and create different libraries based on each group of people that you would like to have. NOTE: Only a maximum of 16 face libraries can be set.

There are two different library types: Employee and Visitor. When you create a library, it gives you the option to choose a Check Template. This is where you will choose from one of the templates that were created earlier. If you do not choose a template at this stage, you can always edit the library at a later time.

After creating all of the necessary libraries, now you can add employees into each appropriate library. When all of the employees have been added into the right libraries with the right templates, they will only be able to enter during the specified time frame.

How can I make sure my device and computer are on the same network?

In order to access network devices from a computer, they both have to be connected on the same network. But how do you check that the settings are correct, and if they are not, how do we fix that? This article is based off of the assumption that the computer and the device are connected to the same router/network switch.

Basic Explanation of the Network

Before we begin the steps on how to configure our network, we need to understand why we are doing it. Each device within a network has its own IP address – we will use 192.168.1.13 as an example – and its structure is like this:

The host ID will be different because that is what differentiates each device from one another. Within a network, the network prefix will be the same and so should the subnet ID, but there will be sometimes where it is different on a device. If the network prefixes and subnet IDs are the same for the devices, then that means they can all reach and communicate with each other.

If either one of the two are different, then that means they are not connected and they cannot establish a connection with each other. The purpose of this article is to make sure that the network prefix and the subnet ID are the same for the computer and your device so that you can create a connection and reach the device.

Checking the Network of the Computer and Your Device

The easiest and fastest way to check the network of your computer is to open up the command prompt. Open the Windows menu and type in “cmd” for command prompt.

Once the window is open, type in “ipconfig” and hit Enter. This will pull up the basic network information of your computer. Make note of the IPv4 address and the default gateway. Now that you have found the IP of the computer, please find the IP of your device – the method to obtaining the IP address might be different for each device. As mentioned above, if the network prefix and the subnet ID are the same for both the computer and your device, then they will be able to communicate with each other. If they are different, then please follow the steps as below:

Changing the Network of Either the Computer or Your Device

The most simple solution to allow both devices to be on the same subnet is to edit the IP address of your device. Usually, you just need to disable DHCP and enable a static IP address. But this is not always possible depending on the set up. NOTE: The computer must be connected with Ethernet in order for this configuration to work. It will not work through Wi-Fi.

In order to change the network of your computer, you will need to go to the Network and Sharing Center. On Windows 10 operating systems, it can be reached by either the Control Panel or from the Taskbar. In the Sharing Center you will be able to see all Connections the computer has. Click on the correct Ethernet connection.

After clicking on the Ethernet connection the Ethernet Status window will pop up. Click on Properties → double-click on Internet Protocol Version 4 (TCP/IPv4). By default, your computer will be set to “Obtain an IP address automatically”, but we will want to change it to Use the following IP address. Remember in the steps above that we found out the IPv4 address of the computer through the command prompt. This is where it will come in handy again. When you select Use the following IP address the boxes below will become active. The information will be as follows:

Once all of that information is filled out, click on Advanced in the bottom-right corner of the window, and it will open up the Advanced TCP/IP Settings where you will Add a new TCP/IP address. Please make sure the new TCP/IP address will match the subnet as the device you are trying to access, or else it will still not connect. NOTE: Please do not use the same IP address as the device. The Network Prefix and Subnet ID should be the same, but the Host ID should be different.

Adding the Subnet Mask can be easily done by hitting Tab after inputting the IP address because the fields will automatically be filled afterwards. Click Add after entering the correct information, and then just keep clicking okay until you are back at the Ethernet Status window. Then close the window.

You can check if the configuration was done properly by opening the command prompt and pinging the device’s IP address. You can do this with the prompt: ping IP address. For example: We are using the IP address 192.168.0.10 for the device. Enter the command prompt and type ping 192.168.0.10. If you receive a response, that means the configuration was done correctly, and you may now access your device.

How to Use External QR Scanner

This article is applicable to the facial recognition temperature scanners which are models 2MTHFR-2M or 2MWTK.

.

.

 Specification Sheet – NVR – LV-N9508Q8E

 Specification Sheet – Camera – LV-PBK80804C

 Quick Start Guide – NVR – LV-N9508Q8E

 User Guide – NVR – LV-N9508Q8E

 Firmware – NVR – LV-N9608C8E LV-N9616D6E v3.5.31

 Client – LaView Net Client for Windows

 Client – LaView Net Client for Mac

 Video Player – VSPlayer for Windows

 Video Player – VSPlayer for Mac

 IP Portal – IP Search Portal (SADP) for Windows

 Plugin – Web Component for Safari / Mac

 Technical Support Articles

.

How do I connect my TVI system to my phone app?

Please follow these steps to setup your mobile device. You can watch the YouTube videos and follow along or follow the instructions bellow.

IPhone:

https://www.youtube.com/watch?v=zshaTac0ka8

Android:

https://www.youtube.com/watch?v=G1DtkrYLIas

LaView NET app:

*If using 4G/LTE with bad signal, you may not obtain a picture. Attempt using a strong signal.

LaView DVR User Guide

Read Also : Camius DVR installation and user guide

.

How do I download videos off my TVI System?

To download video footage you’ll need a flash inserted into one of the USB ports on the system. Then go to Main Menu>Export>Normal. Once in the exporting page, you’ll need to select the channel the video was recorded on along with the starting time and end time to search for footage.

Then click on “Search” at the bottom and you’ll have some video previews show up. You can select any of the previews and play it on the top right hand side. When you know what files you’ll need check mark the box on the upper left hand corner of the preview window and click on “Export” at the bottom. Once the export is done, you’ll now have all the files on your flash drive.

How do I format my HDD?

To format your HDD you’ll need to go to the Main Menu>HDD>General. Once in the HDD menu, check mark the box to the left-hand side of the HDD information. Then click on “Format” or “Int” at the bottom. Please note this will delete all information off the HDD.

How do I playback my recordings?

To playback videos go to Main Menu>Playback>Normal. In that section choose your camera(s) on the right-hand side. Then double click any of the days on the calendar with either a dark blue or red on them. This should automatically start playback for that day. Use the bar at the bottom to jump to a specific time during that day.

I have everything plugged in, but all I see on my screen is “No Video”

The system should automatically pick up cameras once they are connected and have power. Be sure to check the power source for the cameras. If the power is connected correctly there may not be enough power be supplied. Cup your hands over the lens and if the IR lights turn on, then the camera has enough power. If not, you may need to try a different outlet for the cameras.

I’m having issues connecting my DVR to my phone.

Possible Fixes:

1.Please go to Menu-Configuration-Network and under the General tab make sure enable DHCP is selected, if it is not enabled then select enable and apply. If you had to enable it, restart the NVR and try the P2P setup again.

2.If you are still having issues, make sure DDNS is NOT enabled(unchecked). If DDNS is checked, uncheck it and apply then go back to Platform Access and disable P2P and apply. Once both are disabled, do a power cycle and reboot the unit. After the unit restarts enable P2P again, and do another power cycle.

3.Go to Extranet Access, Platform Access or DDNS and make sure LaView P2P is selected then apply, also make sure “Enable Stream Encryption” is disabled.

4. If none of these work, then it could be a network issue. Try to restart your modem/router by unplugging it for about 45 seconds. Plug it back in and restart the NVR, then try to reconnect your system to the P2P account.

How do I find my system’s IP address?

To find your system’s IP address go to Main Menu>Maintenance>System Info>Network. The IPv4 Address at the top is your local IP. If your IP address is 0.0.0.0 or 192.0.0.64, this means your system is offline. There are a few causes from this, but usually it’s a bad ethernet cable or the cable is not plugged in properly to either the DVR or Router. If those are checked to be correct, try restarting your router by unplugging it for a minute and restarting the DVR.

Which mobile app do I need?

-If you have DVR starting from LV-N52xxxx please download “LaView Patrol”

-If you have DVR starting from LV-N9xxxx, LV-D11xxxx, LV-D21xxx, or LV-T94xxxx, please download “LaView Net”

-If you have DVR starting from LV-D04xxxx, or LV-D51xxxx  please download “LaView Mobile”

My system keeps rebooting every few minutes. – LV-T93 units Only

You’ll need to upgrade the systems firmware to fix this issue. Try to upgrade the firmware immediately after the system has restarted to avoid a potential reboot during the upgrade process. Please follow the instructions below to do this.

Please download the firmware here: https://www.dropbox.com/s/yf6thpfyx04ag33/digicap.dav?dl=0

Once you have that file, put it on a flash drive and connect the flash drive to the DVR. Go to Main Menu>Maintenance>Upgrade and click on the Digicap file, then upgrade at the bottom. Once this is complete the system will reboot, and you’ll have the new firmware.

How do I find my system’s IP address?

To find your system’s IP address go to Main Menu>Maintenance>System Info>Network. The IPv4 Address at the top is your local IP. If your IP address is 0.0.0.0 or 192.0.0.64, this means your system is offline. There are a few causes from this, but usually it’s a bad ethernet cable or the cable is not plugged in properly to either the DVR or Router. If those are checked to be correct, try restarting your router by unplugging it for a minute and restarting the DVR.

I need to reset my password – LV-D04xxxxx

Please email us at info@laviewusa.com to reset the password for this system. In the email please mention you need a password reset along with the model number and date that displays on the main view of the system. A technician will reply with some instructions and a temporary password for your system.

How do I back up files off my DVR? – LV-D04xxxxx

To backup files on your DVR connect the USB drive to the USB port then go to Main Menu-Storage-Backup-Select USB device-Backup-Select “AVI”-Choose Start & End Time-Add-Select File-Start. Once the file has been backed up to the device please disconnect the USB drive.

How Do I set up recording on my DVR? – LV-D04xxxxx

Instructions:

2. Go to Main Menu>Configuration>Record>Record Plan>SET>Select period 1 for Normal(Continuous) or MD (Motion Detection) and then check the Select All box to copy the settings to the rest of the week. Click Apply then OK. If you’d like to set up a different schedule for each day, set the record plan for specific days individually.

3. Click the “Copy” button in the Record Plan section to copy the settings to all the other camera channels, press Apply and then Ok. All channels will have the same color scheme if this is done correctly.

How do I connect my DVR to my cell phone? – LV-D04xxxxx

Please use our point to point service. To get the P2P service working on the DVR go to Main Menu- Configuration- Network- make sure DHCP is checked (if not please check then click app. to apply). Then go to P2P under network and make sure that state says online (For model LV-KDT0808B7W go to Advanced-P2P service).

If it says the DVR is offline please check the Ethernet cable. Once P2P is confirmed online we will move to the LaView Mobile app that you can download from the Play Store or App Store. In LaView Mobile we will add a device with the “+ Device” then enter the Device ID and password shown in the P2P area. Make sure to save on the top right. Once you have your new device click on it then select 4 cameras and click the Play button. Live View should now start.

Please download the LaView Mobile app. Use the links below.

Android:
https://play.google.com/store/apps/details?id=com.vss.laview&hl=en

 Apple IOS:
https://itunes.apple.com/us/app/laview-mobile/id955357794?mt=8

For the Ipad use the HD version, this is for tablet use.
https://itunes.apple.com/us/app/laview-mobile-hd/id972423374?mt=8

LaView Mobile P2P Set Up
Note: The setup was done with an Android phone. The iPhone setup process is almost identical.

2. Click on the “+ Device” option.

3. Go to DVR, Main Menu>Configuration>Network>P2P then scan QR code or manually enter Device ID and password.

4. Press the “Save” button to be taken to the device list.

5. Select Device and select cameras. Press “Play” for Android or “Live” for iPhone to start live view.

.

Support log in with cloud technology

Support real time live view

Support remote playback

Local recording and play

Support snapshot and pictures searching

Support bidirectional talk

Support PTZ control

Support scanning serial number by QR code

Support cloud user register and modify

Support remote device add, edit and delete

Support local device add, edit and delete

Support adding device by address

Support manually searching device in LAN

Support version updating automatically

Support searching device function by shake

.

How to find out the “Cloud ID” (Serial Number) when adding device to PC Client “VMS”?

The “Cloud ID” is “serial Number”on the NVR UI Monitor Interface

Go to your TV Monitor that is connected to NVR, Navigate to “Main Menu–>Advanced–>Version“–> You will see the Serial Number

How to Flip the Camera

1. select the channel of the flip camera

2. Navigate to “Main Meun“–> “XVI control“

3. check the”Overturn

How to reset XMEye Pro Password?

1. Click on “Forget Password”

2. Input your number or Select “Email”(Depends on the method you signed up before)

3. Input your email address and click on “Get Code”

4. A code will be sent to your email, input the verification code here and click on “Next” to continue.

,

XMEye New Gui User Guide

Read More : XMEYE – How to connect DVR/NVR on PC Mobile Browser

How to Share the APP to other

1.Open the “Xmeye Pro ” app ,Click the pencil to edit,

Then Click the Share

.

2.Select the function which you want to share

.

3.Finally enter the user name who you want to share ,then you can shre to others successful.

My UI Interface shows “No signal” or “Black Screen”

We need to divert this issue into two situations:

1. DVR Indicator light is on:

(1) Cause: The camera system’s video output resolution is 1080P. If your TV monitor resolution is below 1080P, this issue will occur. Steps:

Please right-click and hold your mouse for over 10 seconds to see if the system can reboot or not. Or, please try to connect the system to another TV monitor with a higher resolution (above 1080P)

  (2) Cause: The hard disk drive inside of the DVR box is broken, and use the screwdriver to open the DVR box to unplug the wires of the hard disk drive, and reboot the DVR to have a try. If the DVR box can be rebooted after unplugging the wires of the hard disk drive(HDD), which means the HDD is having the issue, and needs a replacement, plz contact email love@hiseeu.com for a replacement HDD if their warranty is still 1 year, and if the warranty is over 1 year, plz leave a five-star review for us to apply for a free HDD  

.

.

2.DVR Indicator light is off:

(1) Cause: The power adapter 12V 2A connected to DVR box is broken

Step: Use another power supply 12v 2A to power on the DVR unit to have a try

( If you do not have a spare one, use the one that is connected to 4 cameras to have a try)

(2) Cause: The hard disk drive inside of the DVR box is broken Step: Use the screwdriver to open the DVR box to unplug the wires of the hard disk drive, and reboot the DVR to have a try. If the DVR box can be rebooted after unplugging the wires of the hard disk drive(HDD), which means the HDD is broken, and needs a HDD replacement, plz contact email love@hiseeu.com for a replacement HDD if their warranty is still 1 year, and if the warranty is over 1 year, plz leave a five-star review for us to apply for a free HDD  

.

My UI Interface stuck in Hiseeu Logo

We need to upgrade the system to solve this problem, and check customer’s NVR mainboard info first, and take a photo for us to make sure about firmware verison, then we will ask manufacturer to send us a firmware to upgrade the system to solve this problem

1. If you are in the phone call , just let the customer take a photo of the mainboard, and send it to email love@hiseeu.com. We will ask for a firmware to solve this problem during our working time

(Different versions have various firmware, there is no standard firmware to upgrade the system, so we need to ask the original manufacturer to do that)

2. If you are dealing with the email:

Try with the steps:

1. Ask the customer to open the DVR box by using the screwdriver, and take a photo of this mainboard, and make sure the QR Code is clear enough for us to scan

2.After receiving the photo of the mainboard,  we will ask the XM Manufacturer for a firmware, and upgrade the NVR with the new firmware.    

Upgrade steps

Attached upgrade firmware is for your reference, please download and unzip it first.

1. Copy these 2 files to your USB flash drive, the root directory(Do not under any folder, see the picture attached)

2. Power off the DVR and insert the USB device

3. Power on the DVR, it will upgrade automatically. Please give it a try and let us know the outcome.

How to Sign Up APP Account

Please follow these instructions to sign up for an account via your mobile number.

1. Click on Sign Up

2. Sign Up by email or Select Mobile Number

3. Select the correct country code +1, input your mobile number and click on “Get code”

4. A code will be sent to the mobile phone number, input the verification code and continue.

[Note: You can tap on “Local” for quick login without registration. (In this situation, you still can have live view and playback but are not able to receive motion detect alarm message), so mostly we suggest customers to sign up an account first]

Network “Probing DNS”?

1. Go to Monitor UI Interface, and Navigate to “Main Menu > Network > Net Service”, if the “Cloud Status” shows connected, means NVR/DVR is online

–>2. If the cloud status shows “Probing DNS”, Please Navigate to “Main Menu > Network > Check the icon of “Enable DHCP”–>Apply; –>Reboot the DVR by unplugging the power adapter and re-plug it, then double-check the cloud status ( only cloud status shows )

One or two cameras are not wokring

(1) BNC Cable connected to Camera is broken

Step: Use another BNC cable to connect the camera to have a try

(2) The port of the DVR box is broken

Step: After changing the BNC cable, and still there is no camera image, plz insert the camera into another port of the DVR to have a try

(3) Camera is broken after troubleshooting with the steps （1）–（2）

Unable to open VMS archive file

Please drag the exe file to your Desktop interface (do not under any folder) and run it again.

Like it the photo shows , plz do have a try again ,the VMS will run normally

Upgrade NVR/DVR firmware

If customers need a firmware upgrade for NVR/DVR, and we need the “System version” to send to XMmanufacturer to ask for a firmaware to upgrade  

Go to Monitor UI Interface, and navigate to “Main Menu– Advanced–Version“

After get the Version:

Please follow the instructions below to upgrade the NVR/DVR firmware. Steps:

Attached new firmware for you, please download it and unzip it.  

1. Copy to your USB flash drive, and put it in the root directory(Do not under any folder)

2. Plug the USB device into NVR/DVR

3. Navigate to “Main Menu–> Advanced–> Upgrade”

> Upgrade position(Select your usb device)

–> Upgrade file (Select the firmware)

–> Upgrade

What if the APP keeps asking the user and password?

Step: Plz input the Monitor UI user name and password to resolve this issue

The cause： Sometimes the APP would be in the process of auto-maintain, so it would ask for the user name and password to protect the account’s safety. This page will pop up when you want to live to view the camera.

Note: Some customers enter the App account user name and password. Actually, it’s the Monitor UI user name and password      

As for how to find out the user name and password, plz go next to the TV monitor UI Interface, and right click the mouse from “Log out–Log out“, then right click the mouse and navigate to “Main Menu“, this interface [system login] will pop up, and here are the user name and password we need to enter into the app

.

Add device on PC Client(VMS)

VMS download link:

For Windows （2023 newest version）

https://download.xm030.cn/d/MDAwMDE0OTM=  

For Mac ( 2022 version)

https://download.xm030.cn/d/MDAwMDA2NDA=  

.

1. Download PC Client “VMS” and installed

[ Need to drag the file to the desktop after installing firmware, or it would ocurred the issue of “unable to open archive file”]

2. Login with the default User Name and Password. Click “SIGN IN”.

Default User name is: admin

Default Password is: admin

3. Navigate to “Device Manager”–>”Manual Add”

4. Login Type: Cloud ID

Device Name: Name Your Device as you like

Cloud ID : Device Serial Number. We need to go to the TV Monitor connected to the NVR , and find out the information on TV Monitor UI, then right click the mouse to navigate to the path of “Main Menu–>Advanced–>Version” to find out the information “serial number”

[Note: most customers do not know how to find the serial number, so they can’t add the device to PC Client

User Name and password: Input the user name and password that you created for the NVR , and we also need to find this from the Monitor UI.

[Note: Most customers do not know their user name and password, so we need to guide them to go next to the TV monitor, and right click the mouse from “Log out–Log out”, then right click the mouse and navigate to “Main Menu”, this interface [system login] would pop up]

5. Navigate to “Live View”, Click on the device name(serial number), then select “Open All By Sub Stream”

Enable the APP push notification on mobile app “XMEye Pro”

Further support, plz email us at email love@hiseeu.com

Or contact us at +1 917 688 2228

1.Please right-click mouse and navigate to Main Menu–> Alarm–>Motion Detect/Human Detect/Face Detect–> Enable “Mobile Reported”–>click “OK” (Default Setting is for Channel 1, Please select “All” channels.)

2.Open “XMeye Pro” mobile App, and navigate to Event–>Device (the one you named)–>Enable “Allow Notifications”

.

Add device to mobile APP (XMeye Pro)

.

As for how to add the device to mobile APP(XMeye Pro), please follow the below instructions

–>1. Please connect the NVR box to your Router via Network Cable;

–>2. Navigate to “Main Menu > Network > Net Service”, if the “Cloud Status” shows connected, means NVR is online (Please skip step3), 

.

–>3. If the cloud status shows “Probing DNS”, Please Navigate to Main Menu > Network > Check Enable DHCP–>Apply;

–>Reboot DVR by unplug power adapter and re plug it, then double-check the cloud status. 

.

–>4. Go to your TV Monitor, navigate to Main Menu–>Advanced–>Version–> You will see the serial number. 

The QR code contains serial number info. 

.

–>5. Open the mobile APP “XMeye Pro” and register an account by your email

–>6. Click”+” to add device–>Choose “NVR”

Click the “Scan” icon to Scan NVR’s QR Code. (QR code contains username and password)

No need to input the user name and password manually.

And click “Ok”, and go back to the Device page on App,and you will see the device shows status: online ,

.

Note1:

We do not suggest customers to manually input the serial number, If they input it, the user name and password need to be input, If they scan the code, they don’t have to input the user name and password, So we need to guide them to scan the QR code first, in some situations if we really need the information of the user name and password, and for how to find out the user name and password, plz go next to the TV monitor UI Interface, and right click the mouse from “Log out–Log out“, then right click the mouse and navigate to “Main Menu”, this interface [system login] would pop up]

Note 2:

If device shows “offline”, there could be two causes:

(1) DVR is not connected to network successfully, plz go back to Monitor UI Interface to check if the cloud status shows connected or not in the path of “Main Menu > Network > Net Service”

(2) The way he adds the device to the app is wrong, especially some customers don’t know how to find out the QR Code and input the wrong user name and password

What should I do If I forgot my DVR password

1.Right click mouse from home screen, Click “Log Out–>Log Out”

2.Then click “Forget password” ＞ “Forget answer ” ＞ Then you will see two “QR code” on the monitor

3.Open your Mobile APP “XMEye Pro” , 

(1). Click the “+” icon on the top right corner—>Hit “NVR”

(2). Click “Forgot your device password”–> Scan the QR code (CAPTCHA on the TV monitor)

(3). Scan the QR code shown on your TV monitor. You will get the verification code.

(4). Input the code in “CAPTCHA”

Why can’t live view the videos on mobile APP or PC Client VMS

1.Please make sure that your DVR system is already connected to the router through ethernet cable successfully

2.Please go to Main Menu > System > Net Service to check the network is connected or not, Cloud should shows: connected 

3.Make sure the way you add device to your mobile app or PC client with correct serial number and password

Serial number: “Main Menu–Advanced–Version”

Password: DVR login password 

Why the DVR can’t record or playback video

If HDD(Hard disk drive) is having issue or something wrong with record setting, the DVR can’t record/playback the video

1. Check if the hard drive status is normal or error

Navigate to: Main Menu–>Advanced–>HDD info. 

 If it’s hows “error” or no hard drive info, means hard drive failure. (need to replace hard dirve)

2. Check the record plan is set up for 24/7 continues recording

Navigate to Main Menu–>Record Conf

Channel : select “All”

Period: “00:00-24:00”

Select “Regular”

3.   Please make sure the HDD was set up to “Overwrite”

Navigate to Main Menu–>General–>Storage Full

Any ideas, let us know. Thank you for your cooperation. 

.

Welcome to our updated comprehensive how-to guide for getting started with your Hikvision IP CCTV system. IP systems are taking over the surveillance world and whether you’re setting up your brand new Hikvision system, or you need help adding more cameras to an existing setup you have, the step-by-step guides in this Megaforum should be all you need to get up and running!

Part 1: How do I install a Hard Drive in a Hikvision NVR?

Any setup with an NVR will need a hard drive to function as it is what all your footage is saved to. The WD Purple Drive is our go-to recommendation for the vast majority of IP setups as it designed with the high workload requirements of 24/7 surveillance solutions in mind. Please see the guide on picking the right HDD to better understand your storage needs and why we don’t recommend using HDD’s that aren’t optimised for use in a CCTV system.

Please see the five simple steps below for getting your hard drive installed into your NVR:
.

.

Step 1:
.

Firstly, you’ll need to locate and remove the screws that secure the NVR’s casing to the base so that you can access the inside of it. Typically, you’ll find two of these screws on the back of the unit and, depending on the NVR model, more on the sides – Do not lose these screws!​

.

.

Step 2:
.

Once inside, your NVR will look something like this. The parts in here you’ll need to identify are the:​

.

.

Now look at your HDD – fewer things to identify here:​

Step 3:
.

Get your hard drive and NVR connected – You can screw the drive into its bay in NVR first if you wish, but it’s normally easier to wire everything up first. Plug one end of the SATA interface cable into the HDD and the other into the corresponding port on the motherboard, then do the same with the SATA power cable. If the power cable has come already connected to the motherboard, then just plug the other end into the HDD’s SATA power port.​

.

.

Step 4:
.

You now just need to screw the HDD into the bottom of the NVR via the screw holes located in the HDD and corresponding holes in the HDD bay (insert the screws from underneath the NVR into the HDD inside – it can be a bit fiddly).​

.

Step 5:
.

Finally, screw the NVR’s casing back onto the base. Your HDD is now installed and ready to be formatted during the initial NVR setup, which is explained in Part 2.​

Part 2: How do I complete the basic setup of my Hikvision NVR?

You now need to configure the NVR so that it’s ready to connect to your network. Don’t worry – this is simpler than it sounds. This initial setup is simplest when done on the local GUI, using a directly connected monitor. The following steps walk you through this initial setup process:

Note – Avoid plugging anything into the back of the NVR until instructed to do so in this tutorial.

Firstly, you’ll need to look at the back of your NVR and make sure you can identify the following parts that are needed for this stage:
.

[1] – PoE (Power over Ethernet) ports (Most Hikvision NVRs have PoE ports which will power any camera via the network cable. Those that do not will require you to connect the camera across remotely, using a separate PoE injector or switch for power.)
​

[2] – VGA display port
​

[3] – HDMI display port
​

[4] – USB port(s) (and mouse – one should come included with the NVR)
​

[5] – LAN port (and ethernet cable – Cat5e or Cat6 is fine)
​

[6] – Kettle power socket (the power lead is included with the NVR)​

Now, follow these steps. It is easier if you leave your cameras disconnected until prompted later in this guide:

Step 1:
.

Plug the kettle plug into the power inlet to connect the NVR to a power supply.​

​

​

.

​

Step 2:
.

Connect your NVR to a display (this can be any monitor or television) by connecting either an HDMI or VGA cable from the monitor to the corresponding port in the back of the NVR.​

​

.

​

Step 3:
.

Plug your USB mouse into one of the NVR’s USB ports.​

​

​

Step 4:
.

Use an ethernet cable to connect your NVR to your local network – Plug one end of the cable into the RJ45 ports into a network access point (such as an ethernet port on your router), and the other into the LAN port in the back of your NVR.​

​

​

.

​

Step 5:
.

Turn the NVR on and let it boot up. Ignore the beeping noise, it’s completely normal and just the NVR telling you that it isn’t properly configured yet.​

​

You may get a prompt to adjust the NVR’s resolution to match the connected display, click “yes” to view everything in the best resolution supported by your display.​

​

​

​

Step 6:

​

Set your language when prompted.​

​

​

​

Step 7:
.

Set a password for the NVR , as well as a “Channel Default Password”, which will be passed onto any inactive device that is directly connected to the NVR’s PoE ports. We recommend keeping these passwords the same for simplicity’s sake. It’s key that you set a password that the NVR defines as strong and that you remember this password, as resetting the passwords on Hikvision devices can be a hassle that you want to avoid, if possible.​

​

Note – If you have lost your password then please see our guide on How to Reset the Password of your Hikvision Camera/NVR in 5 steps using the SADP Tool​

​

​

​

Step 8:
.

Now set a valid “reserved email” address for the NVR, which Hikvision will use for verification if you need to reset your password.​

​

Step 9:
.

Next, set an unlock pattern of your choice by using your mouse to draw any shape you like – you will be asked to do this twice to confirm the pattern. This will be used to quickly login to your NVR in the local GUI.​

​

​

Step 10:
.

Now, set your time zone, your preferred date format, and date/time.​

​

​

Step 11:

​

On the Network Setup page:​

​

Leave the “NIC Type” as it is.​

​

Either leave the “Enable Obtain DNS Server” box ticked, or untick it and use one these recommended public DNS servers.​

​

It is best to leave the “Enable DHCP” box unticked here. Instead, set the “IPv4 Address” of the NVR to an unused IP address on your network, which is within your gateway’s range. Your Gateway will typically be the IP address of your router. E.g. if your router’s IP address is “192.168.1.1”, you’ll want to give the NVR an IP address within the range of “192.168.1.x”, where “x” is any unused address between “2” and “254”.​

​

Note – DHCP can be left on during this stage of the setup to automatically assign your NVR an open IP address if you like, just be sure to turn it off again once your system up and running. To disable it again once set up, just go to: ​

System/Configuration→ Network → TCP/IP → DHCP Off → Apply​

​

Input the Subnet Mask of your network (typically it’s “255.255.255.0”) and “IPv4 Default Gateway”. If you’re unsure of these, see the below articles which explain how to check what they are and if a particular IP address is available:​

How to setup Hikvision IP CCTV System

How-to: How do I find my router and PC’s IP address using a Windows PC?​

How-to: How do I find my router and Mac’s IP address using a Mac?​

​

The “Internal NIC IPv4 Address” can be left as it is, this just refers to the NVR’s own LAN address (so Plug and Play cameras will use IP addresses on this range).​

​

​

​

Step 12:
.

You can now stop the annoying bleeping! Select your hard drive(s) from the list and click “Init” to format it, and then “Next” when the formatting has completed.​

​

Note – This will completely wipe the drive, so please make sure that any that are being reused to not have data that you might need on them. ​

​

Step 13:

​

The next page is for the Camera Setup. As mentioned earlier, we recommend connecting any cameras after the NVR setup process has completed, so you can skip this page.​

​

Note – Please see part 4 for the instructions for adding cameras to your NVR after the initial setup. ​

​

Step 14:
.

You will now be taken to the platform access page. Again, skip through and leave this for now.​

.

Note – Please see part 12 for adding the NVR to the Hik-Connect app, which revisits this page. ​

​

​

Step 15:
.

Finally, you’ll be taken to the Change Password page and given the option to set a new admin password. Ignore this, unless you actually want to change your password. Remember, your admin password is different from your activation password, which you’ll need to use when activating individual cameras on your network.​

​

Click “Exit” and “Yes” on the “Exit Wizard” popup.​

​

​

.

That’s the initial setup of your NVR complete. You should now be taken to the NVR’s live view page (you won’t see your cameras until these are connected in Part 4), with your main navigation menu at the top of the screen.​

​

.

Part 3: How do I find my Hikvision device and edit its network settings?

You probably want to be able to view your camera feeds remotely wherever you are; either in a web browser, the iVMS-4200 software, or the Hik-Connect mobile app. All IP CCTV devices communicate over your LAN (local network) and have a unique location on the network. So, you will need to be able to locate where the device you want to view is and make sure it has the right settings for it to work on your LAN. You will then be able to access the device from a PC or mobile device, and connect it with the rest of your CCTV system.

Please follow the steps beneath to find and correctly set your Hikvision device’s network settings.
.

.

Step 1:
.

The first step is to work out if you need Hikvision’s SADP tool or not. If you only need to discover and access an NVR and some Plug and Play cameras connected directly to its PoE ports, then you don’t need to use it.​

​

​

If you aren’t using the SADP tool:​

​

Or, on the NVR’s local GUI (Graphical User Interface – when operating the recorder from a connected monitor and mouse), go to:​

​

System → Network → TCP/IP​

​

Here, you can view and change the NVR’s network settings to match your LAN which is explained in step 2 – you can then ignore the rest of the steps.​

​

​

If you are using SADP:​

​

If your cameras are connected to your LAN, rather than to an NVR’s PoE ports, you will need to install the SADP tool. This scans for all Hikvision devices on your LAN by their MAC addresses. Now, follow steps 2-5 below.​

Step 2:

​

You now need to identify some of your LAN’s settings, which you need to set to match on your devices.​

​

From a Window’s PC, you will need to use the Command Prompt tool to find these.​

​

If you’re using a Mac, then you can find these by launching System Preferences, and then going to:​

​

Network → Advanced (make sure your Wi-Fi/Ethernet connection is selected on the LHS) → TCP/IP​

​

​

Make a note of the following numbers, as you will need to use them when changing your device’s network settings:​

​

IPv4 Address – This is the IP address of the computer that you are using. This address is therefore already occupied, so you will not be able to assign any other devices to this specific address. The digits after the final decimal point indicate where the device is located within the range of your local network, which spans 1-254. You’ll need to change the number after the third period (or full stop/dot) to something that is between “1” and “254” and not already occupied by another device on the LAN.​

​

NB – Please see these guides for instructions on checking if a proposed IP address is occupied:​

​

How-to: How do I find my router and PC’s IP address using a Windows PC?​

How-to: How do I find my router and Mac’s IP address using a Mac?​

​

Subnet Mask – This shouldn’t need to be changed on the NVR, it will usually be “255.255.255.0”.​

​

Default Gateway – This is the IP address that’s been assigned to your router. Any device being added to your system needs to be within the range of your gateway in order to be discoverable.​

.

Step 3:

​

Now, launch the SADP tool again. It should show a list of all the Hikvision devices on your local network and their default network settings. Provided the device is being powered and has a connection to your LAN, then it will show up here. You can also alter the device’s network settings here, and check things like the model number, serial number, the firmware version installed on it.​

​

NB – Remember that any camera that is directly connected to your NVR’s PoE ports will not show up in SADP. This is because the NVR hides any cameras directly connected to it from SADP on its own “subnet”, which is separate from your local network. Don’t worry though, as you won’t need to change the settings for these cameras. ​

.

Step 4:

​

Tick the box beside your device to view and edit the network settings.​

​

If the device hasn’t yet been connected to the network then it will show as “Inactive”. You will be asked to set a password for it when you click the tick-box for it. For more instructions on activating your device, please see Part 6.​

​

​

.

.

​

Once activated, ticking the box beside your device will change the network settings in the “Modify Network Parameters” window, so that they match your LAN. You need to make sure that you enter the password for that device before clicking “Modify” for these changes to be saved.​

​

.

Step 5:
.

Check that these changes have been reflected in the SADP device table – you may need to wait a few minutes before refreshing. If they have, then you should be to carry on with getting this device connected to the rest of your system.​

​

NB – If you aren’t the camera’s first owner then you will need to perform a hard reset on it. This will reset the device to its inactive factory state so that you can set new password by activating the camera in SADP. Once this has been done, SADP will allow you to modify each network setting edit the network settings to match your LAN so that you can use the device standalone or add it to your NVR remotely.

.

Part 4: How do I add a Hikvision device to my NVR?

There are a couple of methods for getting your IP camera connected and recording to your NVR:
.

Plug and Play – This is the most popular and simplest method for smaller setups, as all you need to do is plug your camera straight into the PoE ports in a Hikvision NVR. The NVR will then do the rest of the work. Please note that for Plug and Play to work, the device will need to be inactive or activated with the same password as the NVR.​

​

Remote connection via IP – If you can’t have a wired connection to the NVR, you can instead remotely add a camera on the same network as your NVR to it using the camera’s IP address. For this to work, you will need to make sure to do two things:​

​

1. Replace the power supply that would normally come from the NVR’S PoE ports. Using a PoE switch or injector is usually the best way, as it means you can still add power to the device over the same ethernet cable used for everything else. If not, most will let you connect to a separate PSU.​

​

2. You have connected the camera and NVR to the same LAN and that its network settings are correct for the LAN’s range.​

The following steps will guide you through adding new devices using both of these methods. Part 1 covers doing this on the NVR’s local interface (GUI) and part 2 covers how to do this remotely using a web browser.
.

.

Method 1 – Via the NVR’s GUI:

.

Step 1:​

On the NVR 4.0 menu at the top of the screen, go to:​

​

Camera → Hover over the desired channel → Click on ‘Edit’ (small icon in the bottom-left corner of channel thumbnail)​

​

​

.

Step 2:​

An edit window should appear, fill out the fields to add your camera as follows:​

.

Option 1 – Using “Plug and Play”​

​

Connect the camera to the corresponding PoE port number on the NVR (I.e. D1 corresponds to port 1). Then, just select “Plug-and-Play” from the “Adding Method” dropdown, and then click OK to add the camera to that channel – the camera feed should appear after a few seconds to confirm that it’s been picked up.​

​

Note – If you haven’t activated and set a password on the device in SADP, then the IP address should automatically work. The password will be the Activation Password set on your NVR in the initial setup.​

.

.

Option 2 – Adding manually via IP​

​

Change the “Adding Method” to “Manual”, which will let you alter the other fields.​

​

Now edit the other fields to point your NVR to the camera’s location on the network, like below:​

​

​

Adding Method – Select “Manual”.​

​

IP Camera Address – Enter your camera’s IP address here (as explained in the introduction, this will need to match the range of your LAN).​

​

Protocol – Select the device’s manufacturer if it is on the list, or “ONVIF” if it is an ONVIF conformant product.​

​

Management Port – “8000” by default will work fine, or whatever you’ve set the device’s Server Port to if it’s been changed.​

​

Channel Port – This refers to the channel that you want to add the camera to, so leave this as the corresponding number for the channel that you would like to edit.​

​

Transfer Protocol – Set this to “Auto”.​

​

Username – The username you set up when activating the device, usually “admin”.​

​

Password – The camera’s password, which you will have set when it was first activated.​

​

Use Channel Default Password – If you have assigned the NVR and camera the same password during their activation, then you tick this box. This will use the NVR’s password to add the camera and will save you from entering it again in the future.​

​

Enable IP Camera Time Sync – Tick this, as it means the camera will synchronise with the time set on the NVR.​

​

Use Default Port – You can leave this unticked, as you have specified the management port already.​

​

Verify Certificate – Leave this box unticked too.​

​

​

Click OK to save your changes, the NVR should pick the camera up after a few seconds and show the feed on that channel’s thumbnail to confirm this.​

.

.

Step 3:​

To rename the camera, go to:​

​

Camera → Display​

.

Then, select the camera’s channel from the dropdown, and use the field below to set a new name.​

​

Click “Apply” to save your changes.​

​

​

​

​

Step 4:​

You may want to rearrange the Live View screen to show the new camera on a particular tile. To do this, first, go to:​

​

System → Live View → View​

​

Then, select the output port for your connected display that you would like to show the camera on, click on the selected tile and then double-click on the new camera to add it to that tile.​

​

You can select different layout options, or create a customised layout using the toolbar at the bottom of the page.​

​

Click “Apply” to save the new layout.​

​

​

To check the new layout, launch “Live View” using the NVR’s main menu, and then select that layout using the toolbar in the bottom right-hand corner.​

​

​

.

Method 2 – In a web browser:

.

Step 1: ​

Browse for NVR’s IP address in a web browser, and log in with your username and password for it.​

​

.

Step 2:​

Now, navigate to:​

​

Configuration → System → Camera Management → IP Camera​

​

You’ll be shown a table of all the NVR’s channels, showing which are occupied by cameras, and which aren’t.​

​

These channels normally correspond to the same-numbered PoE ports on the back of the NVR.​

​

Click on the channel that you want to add your device to, and then the “modify” button above the table.​

​

.

Step 3:​

A window titled “IP Camera” should appear allowing you to change the “Adding Method” and “IP Camera Address” set for that channel.

If you haven’t already, you will need to make sure that the camera has a valid IP address and correct network settings for your LAN’s range.
.

Option 1 – using “Plug and Play”:
.

You just need to make sure that:​

​

Note – If you haven’t activated and set a password on the device in SADP prior to connecting it to the NVR, then the IP address should automatically work and the password will be the “Channel Default Password” set on your NVR in the initial setup (see step 7 here)​

.

Option 2 – Adding manually via IP:​

​

Change the Adding Method to Manual, which should let you alter the other fields.​

​

Now alter the other fields to point your NVR to the camera’s location on the LAN, like below:​

​

​

IP Camera Address – Insert the camera’s IP address​

​

Protocol – Select the brand of your camera here, or ONVIF if it is ONVIF conformant and the manufacturer doesn’t appear in this list.​

​

Management Port – This is the camera’s network port, which is usually 8000 by default.​

​

Username – The username that you set for the camera, which is usually “admin”.​

​

Password – The password assigned to the camera upon activation in SADP. If you have automatically activated the camera by plugging it into your NVR’s PoE ports, this will the the “Channel Default Password” set during the NVR setup.​

.

Confirm: Retype this password.​

​

Transfer Protocol: This is fine for you to leave as “Auto”.​

​

.

Green ticks should appear beside each field to indicate that what’s inside is valid. Once completed, you can click “OK”:​

.

​

The “Security” column should be “Strong” and “Status” should change to “Online” on the “IP Camera” page – If they do, then you’re finished, just return to the Live View page to check that the camera’s feed is now visible.

​

Note – Clicking the “Start All Live View” button in the toolbar at the bottom of this page will show all of your working cameras feeds at the same time.​

​

Click on other pages for more.

Support log in with cloud technology

Support real time live view

Support remote playback

Local recording and play

Support snapshot and pictures searching

Support bidirectional talk

Support PTZ control

Support scanning serial number by QR code

Support cloud user register and modify

Support remote device add, edit and delete

Support local device add, edit and delete

Support adding device by address

Support manually searching device in LAN

Support version updating automatically

Support searching device function by shake

Why can’t live view the videos on mobile APP or PC Client VMS

1.Please make sure that your DVR system is already connected to the router through ethernet cable successfully

2.Please go to Main Menu > System > Net Service to check the network is connected or not, Cloud should shows: connected 

3.Make sure the way you add device to your mobile app or PC client with correct serial number and password

Serial number: “Main Menu–Advanced–Version”

Password: DVR login password 

Hiseeu XMEYE DVR SECURITY SYSTEM ADVANCED GUIDE

Read More : XMEYE DVR User Manual

What should I do If I forgot my DVR password

1.Right click mouse from home screen, Click “Log Out–>Log Out”

2.Then click “Forget password” ＞ “Forget answer ” ＞ Then you will see two “QR code” on the monitor

3.Open your Mobile APP “XMEye Pro” , 

(1). Click the “+” icon on the top right corner—>Hit “NVR”

(2). Click “Forgot your device password”–> Scan the QR code (CAPTCHA on the TV monitor)

(3). Scan the QR code shown on your TV monitor. You will get the verification code.

(4). Input the code in “CAPTCHA”

Add device to mobile APP (XMeye Pro)

As for how to add the device to mobile APP(XMeye Pro), please follow the below instructions

–>1. Please connect the NVR box to your Router via Network Cable;

–>2. Navigate to “Main Menu > Network > Net Service”, if the “Cloud Status” shows connected, means NVR is online (Please skip step3), 

.

–>3. If the cloud status shows “Probing DNS”, Please Navigate to Main Menu > Network > Check Enable DHCP–>Apply;

–>Reboot DVR by unplug power adapter and re plug it, then double-check the cloud status. 

.

–>4. Go to your TV Monitor, navigate to Main Menu–>Advanced–>Version–> You will see the serial number. 

The QR code contains serial number info. 

.

–>5. Open the mobile APP “XMeye Pro” and register an account by your email

–>6. Click”+” to add device–>Choose “NVR”

Click the “Scan” icon to Scan NVR’s QR Code. (QR code contains username and password)

No need to input the user name and password manually.

And click “Ok”, and go back to the Device page on App,and you will see the device shows status: online ,

.

Note1:

We do not suggest customers to manually input the serial number, If they input it, the user name and password need to be input, If they scan the code, they don’t have to input the user name and password, So we need to guide them to scan the QR code first, in some situations if we really need the information of the user name and password, and for how to find out the user name and password, plz go next to the TV monitor UI Interface, and right click the mouse from “Log out–Log out“, then right click the mouse and navigate to “Main Menu”, this interface [system login] would pop up]

Note 2:

If device shows “offline”, there could be two causes:

(1) DVR is not connected to network successfully, plz go back to Monitor UI Interface to check if the cloud status shows connected or not in the path of “Main Menu > Network > Net Service”

(2) The way he adds the device to the app is wrong, especially some customers don’t know how to find out the QR Code and input the wrong user name and password

Enable the APP push notification on mobile app “XMEye Pro”

1.Please right-click mouse and navigate to Main Menu–> Alarm–>Motion Detect/Human Detect/Face Detect–> Enable “Mobile Reported”–>click “OK” (Default Setting is for Channel 1, Please select “All” channels.)

2.Open “XMeye Pro” mobile App, and navigate to Event–>Device (the one you named)–>Enable “Allow Notifications”

Camera stay in Black’n white during the daytime

It’s a normal situation especially during the switch from night to day, but if the camera keep stayiing in the black and white mode for a long time in the daytime, plz unplug the camera from the DVR port, and replug the wire of the camera into the DVR port to have a try first. 

After repluging the wire of the camera, and if the situation happens again, plz contact us for further support

Add device on PC Client(VMS)

VMS download link:

For Windows （2023 newest version）

https://download.xm030.cn/d/MDAwMDE0OTM=  

For Mac ( 2022 version)

https://download.xm030.cn/d/MDAwMDA2NDA=  

.

1. Download PC Client “VMS” and installed

[ Need to drag the file to the desktop after installing firmware, or it would ocurred the issue of “unable to open archive file”]

2. Login with the default User Name and Password. Click “SIGN IN”.

Default User name is: admin

Default Password is: admin

3. Navigate to “Device Manager”–>”Manual Add”

4. Login Type: Cloud ID

Device Name: Name Your Device as you like

Cloud ID : Device Serial Number. We need to go to the TV Monitor connected to the NVR , and find out the information on TV Monitor UI, then right click the mouse to navigate to the path of “Main Menu–>Advanced–>Version” to find out the information “serial number”

[Note: most customers do not know how to find the serial number, so they can’t add the device to PC Client

User Name and password: Input the user name and password that you created for the NVR , and we also need to find this from the Monitor UI.

[Note: Most customers do not know their user name and password, so we need to guide them to go next to the TV monitor, and right click the mouse from “Log out–Log out”, then right click the mouse and navigate to “Main Menu”, this interface [system login] would pop up]

5. Navigate to “Live View”, Click on the device name(serial number), then select “Open All By Sub Stream”

What if the APP keeps asking the user and password?

Step: Plz input the Monitor UI user name and password to resolve this issue

The cause： Sometimes the APP would be in the process of auto-maintain, so it would ask for the user name and password to protect the account’s safety. This page will pop up when you want to live to view the camera.

Note: Some customers enter the App account user name and password. Actually, it’s the Monitor UI user name and password      

As for how to find out the user name and password, plz go next to the TV monitor UI Interface, and right click the mouse from “Log out–Log out“, then right click the mouse and navigate to “Main Menu“, this interface [system login] will pop up, and here are the user name and password we need to enter into the app

.

Upgrade NVR/DVR firmware

If customers need a firmware upgrade for NVR/DVR, and we need the “System version” to send to XMmanufacturer to ask for a firmaware to upgrade  

Go to Monitor UI Interface, and navigate to “Main Menu– Advanced–Version“

After get the Version:

Please follow the instructions below to upgrade the NVR/DVR firmware. Steps:

Attached new firmware for you, please download it and unzip it.