Get Started with Verkada Intercom Set up and connect your Verkada intercoms Updated over a week ago

Required. You need Org Admin and/or Site Admin permissions for your Verkada Command organization to complete these actions.

What you need

Create a site

Sites are the logical way of grouping and managing devices within your Command organization. Site-level permissions make managing and viewing your devices easier. See Manage Your Sites and Subsites for more information on site creation and management.

Add an intercom

At least one intercom needs to be added to Command before you can see the Intercom tab in the All Products menu. Intercoms can be added to Command from the Devices page. See Add an Intercom to Your Site for more information.

Connect a door

You can pair an existing access-controlled door or wire a door to the intercom that can be unlocked by an intercom receiver. See Configure a TD52 and Wire a TD52 Video Intercom for more information.

Configure receivers

Receivers allow you to answer calls from an intercom and unlock any associated doors. See Add and Configure Receivers in Intercom for more information.

Licensing

Every intercom you manage in Command will need a license. Verkada licensing is applied for each Command organization, and the licenses co-term to a single expiration date. Your licenses may have been automatically added if you claimed your devices via order number. Otherwise, manually add the licenses from the Admin page. See Manage Your Licenses for more information on adding and managing licenses.

Connect your intercom

Recommendation. While Verkada intercoms are considered low-voltage devices that do not require a certified electrician to install, we strongly recommend you work with a system integrator or other professional for installation.

Please refer to the intercom setup guide for instructions on mounting and wiring the door port.

Power and network

Verkada intercoms use Power over Ethernet (PoE) for power and communication over the LAN. In most cases, intercoms will connect directly to an 802.3af PoE standard switch. PoE injectors can be used when a PoE switch is not available. See the intercom’s datasheet for more information.

Check network settings

Verkada intercoms are designed to be plug-and-play. However, if your environment includes a firewall with custom rules and policies, you may need to make some configuration changes to get your access controllers connected to the cloud. See Intercom Network Settings for more information.

Roles and Permissions for Intercom

Roles and Permissions for Intercom

Learn more about Verkada Intercom roles and permissions

Updated over a week ago

This article describes the set of roles and associated permissions for Verkada Intercom.

Verkada intercoms setup guide v1

Verkada Intercom permissions determine who can receive calls, view intercom video, and unlock intercom doors. Intercom permissions depend on your site-level permissions, and whether you’re configured as a Receiver.

At a high level, these are the permissions granted to each level of Intercom devices:

Site-level roles

Receiver

Required. You must be configured as a receiver to receive calls.

If you’re a Verkada Intercom Receiver, you have the baseline receiver permissions (as shown above). These baseline Receiver permissions combine with site-level permissions to determine overall intercom permissions within a certain site.

For example, if you’re a Receiver for a particular intercom, and a Site Viewer, you get all the Receiver permissions, in addition to the ability to view historical video and events.

Note: Receivers, such as Desk Stations and Session Initiation Protocol (SIP) phones are not tied to a Verkada Command user. This means that the user can only get Receiver permissions, regardless of the user’s site-level permissions.

Regardless of their site-level permissions, a Receiver can:

Live-View Only

Site Viewer

Site Admin

.

Verify a user’s eligibility to receive Verkada Pass calls

.

Set Org Admin permissions

Revoke Org Admin permissions

.

Set site and subsite permissions

You can set site and subsite permissions by adding a user, a group, or by existing users and groups.

Add a user

Add a group

Existing users and groups

You can set the site and subsite permissions for existing users and groups by managing the user roles or the sites.

Manage roles

Manage sites

Intercom Network Settings

Intercom Network Settings

Learn about the required network settings for Verkada Intercoms

Updated over a week ago

This article outlines the required network settings that your Verkada Intercom needs to communicate with Verkada Command. For more information on the required network settings for other Verkada product lines see Required Network Settings.

Note: Verkada devices are incompatible with LANs that require proxy servers or Secure Socket Layer (SSL)/Transport Layer Security (TLS) inspection. If either is in use, a bypass for all Verkada devices must be implemented for Verkada devices to communicate with Verkada Command.

Status LED

A flashing blue status LED on the top of the intercom indicates the intercom is not communicating with Command. If you see this behavior, check that the network is set up correctly with the intercom’s requirements. If the problem persists, contact Verkada Support.

IP address

Intercoms must be assigned an IPv4 address to communicate on the LAN and to Verkada Command. Intercoms use Dynamic Host Configuration Protocol (DHCP) and User Datagram Protocol (UDP) to obtain their IP addresses and network configurations.

If you require your intercom to have a specific IP address, create a DHCP reservation using the device’s Media Access Control (MAC) address (found on the device’s label).

Domain Name System

Intercoms use the DNS server to resolve Verkada’s fully qualified domain names (FQDN) to IP addresses to communicate with them. Your DHCP server tells the intercom where the DNS server is on the network and the intercom communicates using UDP port 53.

Note: DNS over HTTPS (DoH) is currently not supported.

Power

Intercoms are powered through Power over Ethernet (PoE). This means the network switch needs to provide power to the intercom, or a PoE injector needs to be utilized. For specifics on power requirements, see the Intercom datasheet.

Firewall settings

Intercoms require access to many endpoints to ensure they can communicate with Command and all features will be accessible. Many customers may want to allow the intercoms to communicate with the general required endpoints.

These are the general domains to allow, applicable for all organization-regions:

Region: United States

Standard Verkada Endpoints

NTP Endpoints

Streaming Endpoints

Calling Endpoints

Access Control Endpoints

Cloud Backup Endpoints

Region: Europe

Standard Verkada Endpoints

NTP Endpoints

Streaming Endpoints

Calling Endpoints

Access Control Endpoints

Cloud Backup Endpoints

Mount a TD52

Mount a TD52

Learn how to mount the Verkada TD52 Video Intercom

Updated over a week ago

Use this article to learn how to mount a Verkada Intercom (TD52). Once you complete the mounting, you can connect the TD52 to the network.

Before you begin

You can mount the TD52 using a flush mount or using a mounting bracket. We recommend that you verify the contents of your box and make sure you have the tools you need

Contents of your box

Tools you need

Choose your mounting option

Whichever mounting option you choose, you should remove the front cover of the TD52 to access the screw holes that allow you to install on a mount.

Use a flush mount

The TD52 comes with a flush mount in the box. You can use the screw holes of the flush mount to mount the Intercom (see image below for visual):

Mount directly to a wall

Use a mounting bracket

You can use the mounting bracket to install the TD52 on to various surfaces that the flush mount plate cannot, where they’re typically used to mount the TD52 on an exterior surface.

<< Click on the page numbers to go to other pages. >>

Frequently Asked Questions

Note: These guides were written for Uniview NVR users who prefer to change settings remotely using a mobile or desktop browser (Internet Explorer). Remote and local configurations share many similarities and only the locations and availability of each feature may vary. The Uniview NVR Manual can provide more information if what you are looking for is not found in this simple guide or if you prefer local access by connecting a mouse and display to your NVR.

How Do I Access My Uniview Security System?

There are two ways to interface with your Univew Security System and to access all its features and configuration options you can choose to access it locally or remotely. Local access refers to connecting your Network Video Recorder to a display and a USB mouse. The monitor and the mouse will serve as the input-output for interfacing. Remote access refers to connecting to your Network Video Recorder through a browser (Internet Explorer provides the greatest compatibility) installed on a device that is in the same network as the Security System.

Local Access and First Time Setup

The NVR interface can be accessed directly by simply connecting the NVR to a display (this can be done with an HDMI or older VGA cable) and to a mouse. Once the display and the mouse is connected and the login screen is displayed, proceed to login. Since this is the first time, we will be using the default username and password (at the time of writing default login and password are admin and 123456) found on the manual that came with the NVR. 

After logging in, Uniview’s privacy policy will be shown for you to review. Once you have reviewed and accepted, you will immediately gain access to the NVR and cameras connected to it. But, since it is the first time we are logged in and we are still using the default credentials, we will be prompted to change the login information.  You will be using the new password for all your future access with the NVR.

Once the password has been changed, a pattern lock will also be prompted (this is optional and can be skipped). After doing so, the Privacy Policy will be displayed for the user to review. The screen that follows the Privacy Policy will let us connect our mobile devices to the NVR. This will grant access to Live View, alerts, and other configurations we may want.

The device QR code will be presented here. Allowing you access to the EZCloud feature. Devices can be added to the cloud manually but it is far easier to just use a link given from the QR code. If you want to pair the NVR with the EZView app, click here to read more about it. 

The next step is to set or synchronize the time. This step will ensure that all scheduling configurations you will set and all alerts and alarm information will be accurate and will work based on your local time.

After this, you will be prompted to check the TCP/IP settings, the default settings will work for most people. If you need to specify networking (usually when DHCP is not enabled on other devices on the network), please do so here. You will still be able to alter this later.

Once the time and the password have been configured, you are now ready to enable and disable the features of the NVR.

To access the menu, you can right-click on any part of the screen and then click on Menu. It can also be accessed along with other options by moving your cursor to the bottom left of the screen. This will take you to the SETUP screen where you can enable and customize alerts, features, and other options available to you.

Remote Access and First Time Setup

You can also access the NVR interface through the use of a browser on a device connected to the same network as the NVR. To do this, you will need the IP address of the NVR you wish to connect to. The easiest way to find this on a Windows PC is with Uniview’s EZTools which can be downloaded here. Once installed on your computer, running the EZtools will automatically show you all connected Uniview devices.

The IP address can also be obtained by logging into your router and checking connected devices, using the command prompt (arp -a command and checking for new devices on the private network) or simply using another display for the NVR to check the current IP address of the device.

Note: Any browser should work to alter configurations, however using Internet Explorer will be the easiest to access the live view. (due to some newer browsers not supporting certain plugins). 

From here, we can see the IP address given by our router to the NVR. 192.168.254.192. It will likely be different for you. Clicking on the Remote Web button will open your default browser and take you to the NVR interface.

You can then proceed to login to your Uniview NVR Interface. Since this is the first time, we will be using the default username and password found on the manual that came with the NVR. After logging in, Uniview’s privacy policy will be shown for you to review. Once you have reviewed and accepted, you will immediately gain access to the NVR and cameras connected to it. But, since it is the first time we are logged in and we are still using the default credentials, we will be prompted to change the login information. You will be using the new password for all your future access with the NVR.

Once the password has been updated, you will be greeted by the Live View display. Clicking on any of the cameras found on the left will show you live footage from it. In this case, a single IP camera is connected to the 4-Channel NVR.

From here, you can now click on SETUP to access all configurations and features and set them up to your preference.

Uniview How To Guides 2024

How Do I Start Recording And Scheduling?

Once properly installed and powered, most Uniview Security System immediately starts recording and saving footage to the Hard Disk Drive. To configure when and what types of footage you choose to save, you only need to navigate to the Recording Schedule tab.

Navigation: Setup > Camera > Schedule

Pre-Record and Post-Record:

If the Pre-Record and Post-Record values are set to 60 seconds and 300 seconds respectively and using motion detection as a trigger, here is how it will play together:
.

Event-Types:

The setup that is shown on the screenshot above can be interpreted this way. During weekdays, from 7:00 AM to 5:00 PM, the system will monitor and record all footage into memory. The rest of the day, the system will not record anything unless a motion trigger or an alarm event is detected. During weekends, the system will not record anything except for motion-triggered events. During holidays, the system will not record anything unless an event is triggered.

How Do I View Playback, Timeline, and Events?

The Playback tab is found between the Live View and Setup tabs of your Uniview Web-Based Interface. As always, Internet Explorer would provide the widest range of options not available to other browsers.

Navigation: Playback

The playback sidebar is the first point of interest. The top drop-down allows you to filter what types of playback you wish to view. The options are as follows:

Normal: Default playbacks and scheduled recording sessions.

Tag: Shows a playback list that matches a tag keyword.

To utilize this feature, you will need to create tags on certain times you want to save for future reference. To do this, click on the time you want to create your tag and click on the Add Customized Tag button on the toolbar as shown here:

A window will open that allows you to name your tag and adjust the time.

After clicking OK, the new tag will be created. To search for tagged footage, change the filter into Tag, click on the Camera, specify the Keyword, set the time range to search between, and then click search as shown below:

This will display all tagged footage that matches the Keywords.

Event: Shows playback list for a matching event. Very similar to the above example but a simpler approach is only looking for footage of recorded events. To use this function change the filter to Event, choose a specific Event-Type from the drop-down list, select the Camera, specify the Time Range the system will search. Click search. This will display all events that match the Event-Type captured by the camera within the time range.

Smart: The system analyzes recordings for smart search results. 

How Do I Monitor And Manage My Storage?

To monitor and manage your storage, you will need to access the Hard Disk group on the setup. The settings and their functions are explained below.

Navigation: Setup > Hard Disk > Hard Disk

Hard Disk

This tab shows you details of the current storage situation of your NVR. The total capacity and the available free space can be monitored from this tab alongside options to add and more storage.

Disk Group

This tab allows the creation and management of Disk Groups. A handy tool if managing a large number of Hard Disks and to simplify storage allocation.

Navigation: Setup > Hard Disk > Disk Group

The disk group feature allows us to assign hard disks to a disk group and use the disk group to store recordings and snapshots of specified cameras. Different arrays can be assigned to different disk groups. Redundant disks cannot be assigned to any disk group. Disk group information will be initialized if any disk in the group is formatted.

Allocate Space

This tab allows setting a maximum storage allocation for each camera on a disk group.

Navigation: Setup > Hard Disk > Allocate Space

Advanced

This tab will determine what the Network Video Recorder will do once the Hard Disk Drives are full and new footage needs to be saved. Setting this to Overwrite should allow the NVR to delete older footage to make space for new ones to be saved while setting this to Stop will prevent any new recordings to be saved.

Navigation: Setup > Hard Disk > Advanced

How Do I Set Up Tamper Detection?

To set up Tamper Detection, you will need to access the Tampering section of the Camera Setup.

Navigation: Setup > Camera > Tampering

How Do I Set Up Motion Detection?

Navigation: Setup > Camera > Motion

How Do I Set Up Face Detection?

The Face Detection feature creates an EVENT when a person’s face is detected by the Video Content Analysis. It will then proceed to take screenshots of the person or persons detected.

Navigation: Setup > VCA > Face Detection

How Do I Set Up Line Crossing Detection?

The Cross Line Detection feature creates an EVENT when an object crossed a specified line. This feature has 3 modes. A<->B which creates an event whenever an object crosses the line. A->B which only triggers when an object moves from side A to side B. B->A which only triggers when an object moves from side B.

Navigation: Setup > VCA > Cross Line Detection

How Do I Set Up Intrusion Detection?

The Intrusion Detection feature creates an EVENT when an object that meets the minimum size relative to the region (based on percentage) enters any of the specified regions and stays inside the region past the minimum time threshold.

Navigation: Setup > VCA > Intrusion Detection

How Do I Set Up People Counting?

The people counting feature is used to monitor the number of people entering or leaving an area.

Navigation: Setup > VCA > People Counting

How Do I Adjust Image Enhancements, Exposure, Infrared, and Starlight?

Although fully-functional and is configured by default, you can specify desired image enhancements on the Image tab.

Navigation: Setup > Camera > Image

How Do I Adjust Resolution, Frame Rate, Bit Rate, and Video Compression?

Adjusting the resolution, frame rate, bit rate, and compression of recorded footage can be done by navigating to the Encoding Tab.

Navigation: Setup > Camera > Encoding

How Do I Name My Cameras and Manage On-Screen Display?

Navigation: Setup > Camera > OSD

How Do I Directly Transfer Footage From My Security System to My USB?

To transfer footage from the Network Video Recorder to your USB, you will need to create a video clip from the recorded footage, then save it to your USB.

.

Upgrade your DVR Security System

If you have a camera security system that is wired for coaxial and you cannot run Ethernet, you can connect our Coaxial to Ethernet Converter Kit. This enables upgrading your analog system to IP while still using existing coaxial cabling. The converters are small, lightweight, easy to install, and do not need to be connected to an additional power adapter. There is no need to run new cabling, simply plug the converters in. Send data and power over coax up to 900 m (2,952 ft) reach (performance and supported length are subject to transmission coaxial cable and coupler quality). This is a cost-effective and useful solution for legacy DVR upgrades and future expansion.

.

Coaxial to Ethernet Converters

To upgrade your wired system to an NVR with IP security cameras, you will need:

or

Features:

Easily Connect IP Cameras Over Existing Coaxial Cabling

Also Read : How to use Webcam on Surveillance Station on QNAP NAS?.

Installing your Coaxial to Ethernet Converters

Safety Precautions

Please read the following safeguards and warnings carefully before using the product in order to avoid damages or losses:

 WARNING: Do not use power line other than the one specified. Please use it properly. Otherwise, it may cause fire or electric shock.

Installation

.

Product Overview & LED Indicators

.

Mounting

The Coaxial to Ethernet Converter supports two installation modes: junction box or it can support DIN rail mount.

Note: Supports slide width of 28 mm (1.1”)

For full mounting instructions, please refer to the junction box’s Quick Start Guide on Lorex’s support page.

.

Product Specifications

.

PoE Power Supply Specifications (RG59 Coaxial Cable)

ePoE switch supply voltage 48V. / RG-59, max. DC resistance < 5 Ω / 100 m (328 ft)

ePoE switch supply voltage 53V. / RG-59, max. DC resistance < 5 Ω / 100 m (328 ft)

4K IP Wired Dome Security Camera with Smart Deterrence: Installation

This article provides instructions on how to install and connect 4K Smart Deterrence IP Dome Camera with Smart Motion Detection Plus (E893DD Series) to the NVR.

.

Before Installing

.

Installing 4K Smart Deterrence IP Dome Camera

.

Connecting 4K Smart Deterrence IP Dome Camera

Connect the cameras and cables to your NVR using one of the following two setup methods.

1. Connect cameras directly to the NVR (recommended)

Connect the Ethernet cable to the camera and then connect the other end of the Ethernet cable to the NVR’s PoE ports. The camera may take a minute to power on after being connected.

Note: A 12V DC power adapter (model#: ACCPWR12V1, not included) is only required if connecting the camera’s Ethernet cable to a router or switch that does not support PoE.

Notes:

2. Connect cameras to a PoE switch or router on your network (not included)

Connect the Ethernet cable to the camera and then connect the other end of the Ethernet cable to a router or switch on your network. See your NVR manual for details on connecting the camera to your NVR using a router or switch.

.

Using the RJ45 cable gland (optional)

The pre-attached RJ45 cable gland covers both the camera’s Ethernet connector and the RJ45 plug to provide weather-resistance and protection from dust, dirt and other environmental contaminants.

To use the RJ45 cable gland, twist the RJ45 cable gland barrel securely onto the camera’s Ethernet connector.

Tip: The RJ45 cable gland is weather-resistant. Seal the cap with silicone and/or electrical tape for additional sealing if it will be exposed to precipitation regularly.

Cable extension options

You can extend the Ethernet cable run for your camera up to 300ft (91m). To extend the cable run beyond 300ft (91m), a switch will be required (sold separately). Use an RJ45 coupler or a network switch (not included) to connect male ends of Ethernet cables together. We recommend using UL CMR approved cables available at lorex.com.

4K IP Wired Dome Security Camera with Smart Deterrence: Getting Started

This article provides instructions on how to setup the 4K Smart Deterrence IP Dome Camera with Smart Motion Detection Plus (E893DD Series).

.

Important Installation Guidelines

The optimal installation location, including the height and angle of your camera, will depend on the type of detection settings that you want to enable. Since the optimal angle for person and vehicle detection is different from the optimal angle for face detection, you will need to select one approach.

Note: You cannot enable both face detection and person and vehicle detection at the same time.

Based on your detection preference choose between:

1. Optimizing person and vehicle detection accuracy

2. Optimizing face and mask detection accuracy

Note: Facial recording without consent is illegal in certain jurisdictions. Lorex Technology does not assume liability for any use of its product that fails to conform with local laws.

High accuracy Vs. low accuracy face detection

Accuracy will be influenced by lighting conditions and the distance/angle of a person’s face to the camera.

Mask detection

With face detection enabled, you can set the alarm type to detect if a person is not wearing a mask. A person not wearing a mask or improperly wearing a mask will be captured in the face preview sidebar and a notification will be sent through the Lorex App.

.

For full instructions on installing and connecting the 4K Smart Deterrence IP Dome Camera to the NVR, visit Installing 4K Smart Deterrence IP Dome Camera.

4K Ultra HD Smart Deterrence IP Camera: Installation Guide

This article provides instructions on how to install and connect 4K Ultra HD Smart Deterrence IP Camera (E893AB Series) to the NVR.

.

Before Installing

.

Installing 4K Ultra HD Smart Deterrence IP Camera

.

Connecting 4K Ultra HD Smart Deterrence IP Camera

Connect the cameras and cables to your NVR using one of the following two setup methods.

1. Connect cameras directly to the NVR (recommended).

Connect the Ethernet cable to the camera and then connect the other end of the Ethernet cable to the NVR’s PoE ports. The camera may take a minute to power on after being connected.

Note: A 12V DC power adapter (model#: ACCPWR12V1, not included) is only required if connecting the camera’s Ethernet cable to a router or switch that does not support PoE.

Notes:

2. Connect cameras to a PoE switch or router on your network (not included).

Connect the Ethernet cable to the camera and then connect the other end of the Ethernet cable to a router or switch on your network. See your NVR manual for details on connecting the camera to your NVR using a router or switch.

.

Using the RJ45 cable gland (optional)

The pre-attached RJ45 cable gland covers both the camera’s Ethernet connector and the RJ45 plug to provide weather-resistance and protection from dust, dirt and other environmental contaminants.

To use the RJ45 cable gland, twist the RJ45 cable gland barrel securely onto the camera’s Ethernet connector.

Tip: The RJ45 cable gland is weather-resistant. Seal the cap with silicone and/or electrical tape for additional sealing if it will be exposed to precipitation regularly.

Cable extension options

You can extend the Ethernet cable run for your camera up to 300ft (91m). To extend the cable run beyond 300ft (91m), a switch will be required (sold separately). Use an RJ45 coupler or a network switch (not included) to connect male ends of Ethernet cables together. We recommend using UL CMR approved cables available at lorex.com.

.

Safety cautions

Product overview

DVR

Camera

Power Cable Splitter

BNC Cable

Xmeye Dvr System Instructıons For Use

Read Also : Camius devices troubleshooting

Hard Drive Installation

IMPORTANTTo record videos and play the historical videos, the installation of the Hard Disk Drive is a must.
Otherwise,you can only watch the live video.
This DVR system works with a 3.5” SATA Hard Drive.The Hard Drive should be formatted after it’s installed.×Dismiss this alert.

System Connections

IMPORTANTDo not fix the AHD camera before you can view the image on the monitor and confirm the ideal position to install it.×Dismiss this alert.

1.Plug a power adapter into the DVR and the socket to power on the DVR.

2. Connect a monitor to the HD Output or VGA Output on the DVR with an HDMI cable or VGA cable (not included).

3. Connect the Ethernet Cable with the DVR and your router.

4. Connect the AHD camera with the BNC Cable.

5. Connect the Yellow Video Connector to the BNC Video Input on the DVR, and connect the Red Power Connector to the Male Connector of the Power Cable Splitter.

6. Connect the Female Connector of the Power Cable Splitter with another power adapter. Then plug the power adapter into the socket to power on the camera.

Operate dvr system with a monitor

Startup Wizard

After connecting the DVR and cameras to power, wait for 2-3 minutes. A Startup Wizard will start to guide you via a series of pop-up windows.

Connect the USB mouse to the DVR, then click Next until you see the window of Time-Language Configuration.

1.Select the time zone, date format, time format, language, and set the time for your DVR system.

2. The default password is empty, please reset it for your DVR following the tip.
The new password should be more than 6 digits and use the combination of numbers and letters to ensure your system’s security.

3. Select safety questions and enter the answers for resetting the password if necessary.
You can also enter your email address for getting the verification code to reset the password.

4. Check if the network connection status is normal. If not, you can configure it by clicking Network.

5. Scan the QR code to get the Serial Number of your DVR system and download the App named XMEye into your mobile device.

6. Before fixing the cameras, you can log in to XMEye App to check the live view to confirm the ideal position.

7. Detection based on human shape is enabled by default.
The DVR system will send alerts to your mobile device when there is human shape detected by the cameras.
Please refer to the section of Motion Detect the detailed setting.

IMPORTANTClick Next and OK to exit the wizard. You can right click on the screen, then go to Main Menu > Startup Wizard to bring it up again.
If the wizard is no longer needed, just check the box before Don’t Display the Wizard again on the first interface of the Startup Wizard.×Dismiss this alert.

Live Video

You will see the live videos from the AHD cameras in split-screen mode (9 screens by default) after exiting the wizard.

※ Move the mouse cursor to the live video of any channel, some icons may be displayed according to the setting.

Notes:

1.The icons of and are displayed by default, while for icon , and , please right click andgo to Main Menu > Alarm (see on page 15) to enable them.

2. If you want to loop to display the live videos from some certain channels in full-screen mode, please go to Main Menu > System > Tour to enable this function.

3. For viewing the live video from one channel in full-screen mode, please move the mouse cursor to the desired channel, then double click. To exit full-screen mode, double click again.

Hard Drive Formatting

When you receive the system, the system has a pre installed hard disk, which does not need to be formatted,but if you have to replace another hard disk, it needs to be formatted at first ,then it can be used normally Install the Hard Drive first, then right click and go to Main Menu >Advanced > Storage to check if the type is Read/Write or the status is Normal.

If not, please click Format Storage to start formatting your Hard Disk Drive.

Video Recording

Right click on the screen, then go to Main Menu > Record > Record Conf. to set the record mode and record plan.
This DVR is set to record videos 24 hours a day by default.

Channel:

Select the channel to set the record mode and plan. You can select a single channel or all channels.

Redundancy:

Installing 2 pieces of Hard Disk Drive is required when enabling this function, and HM245 doesn’t support it.

Length:

Set the maximum video length of each recording from 1 minute to 120 minutes. It’s 60 minutes by default.

PreRec:

The camera will start recording a video around 5s before it detects the motion or human shape.

You can reset the time from 1s to 30s, but the accuracy of the pre-recording time may be affected by the bitrate.

Mode:

Set the recording mode and the options are Schedule, Manual and Stop.

Record Plan:

Set the recording schedules.

Notes:

The oldest video will be overwritten by the latest one by default when the Hard Disk Drive runs out

of space.

Video Playback

Right click on the screen, then go to Main Menu > Record > Playback to play the video recorded.

You will see the different playback modes in the pop-up window of Play Mode.

Explanation of playback modes

1.Common Playback

Select the channel(up to 4 channels at the same time), a period and a date on Blue background to

play all types of videos recorded.

1. Area for Video Playing
2. Playback Buttons
3. Timeline
4. Channel
5. Filters
6. Filtered Videos List
7. R: Standard Videos
8. M: Videos recorded when the camera detects motion or human shape.
9. Detailed Info. of the Selected Video
10. Search
11. Show/Hide Filtered Videos List
12.Timeline by Hour/Minute

TipFilters will not be available after you left click on the timeline, but you can exit this mode and re-enter to select the filter.×Dismiss this alert.

Option 1 :

Left click on the Green/Red (Green for standard videos recorded, and Red for the videos recorded whenthe camera detected motion or human shape) part of the timeline of each channel to play the historical videos.

Option 2 :

Left click on the live video of one channel, show the filtered video list, then double click on the selected video to play it.

Description of Playback Buttons

Left click on the live video of any channel, then start using the buttons to control the video playback.

Tips:

① You can click the icon to cut a video, then click to back up to the external storage.

② Previous Frame and Next Frame work only when pausing the video.

③ The speed of Fast Reverse and Fast Forward will be displayed on the right end of Playback Buttons.

2. Sync Playback

This function aims to put the videos from different channels at the same time to compare.

Select 2 channels at least ( up to 4 channels), a period and a date on Blue background to play the historical videos simultaneously at the selected time on the same timeline.

3. Dayparting

This function aims to put the videos from the same channel but at different time to compare.

Select a channel, number of split screens, and a period to play the videos recorded from this channel on different timelines.

NotesYou need to press and hold the left mouse and move on the bar of Period to select time period.×Dismiss this alert.

4. Smart Express

Select one channel or all channels, then select the speed of Fast Playback, the system will play all the videos recorded with the speed you selected.

5. Smart Search

Select one channel and a time period, then check the box before Detect and select a date on Blue background to play the videos recorded when the camera detected the motion or human shape.

※Double click the thumbnail to play the related videos.

6. Face Search

Select one channel, a time period and a date on Blue background to play the videos recorded when the camera detected faces.

Video Backup

Step 1:

Insert the USB disk into the USB port of the DVR system. Right click on the screen, then go to Main Menu >Record > Backup to start.

Step 2:

Select your USB disk, then click Backup to bring up a pop-up window.

Step 3:

Select Channel, Start Time and End Time, then click Add to display all the filtered videos.

Step 4:

Check the box to select the video files and Backup format, then click Start to back up the videos.

Tips:

① The format of the USB Drive should be FAT 32.

② An alternative solution to back up the videos is listed below.

• Go to the interface of video playback and click to show the filtered video list.

• Check the box to select the videos.

• Click to start backing up. The next steps are the same as the first solution mentioned above.

Snapshot Setup

The system will capture the snapshots 24 hours a day when the camera detects motion or human shape.

Go to Main Menu > system> SnapShot Conf. to reset the time interval of capturing a snapshot, and set up the schedules when the camera will capture a snapshot as well.

Alarm

IMPORTANT:

The alarms of Motion Detect and Human Detect are enabled by default. If you need to record videos whenthe camera detects the face or gets blocked as well, please enable Face Detection and Video Blind.

Please go to Main Menu > Alarm to set the alarm you need.

Motion Detect

The camera will start to record videos when it detects motion.

Channel:

Select the channel you’d like to enable motion detection.

Enable:

Check the box to enable motion detection.

Sensitivity:

If you select higher sensitivity, the camera will be more easily to be triggered to start recording videos. It’s advised to select Middle to balance the accuracy and effectiveness of the alarm, thus reducing the false alarms.

Region:

Click Set, then press and hold the left mouse to drag and select the area for detecting. The pink area indicates the selected area.

Period:

Set up to 4 time periods for each day to send the alerts when the camera detects motion.

MD Interval:

Set the time interval of two alerts. It aims to decrease the frequency of the alerts caused by the same moving object.

Record Channel:

The selected channel(s) will start recording when the current channel detects motion.

Tour:

The display will loop to display the live video from the selected channel(s) in full-screen mode when the current channel detects motion. You can go to Main Menu > System > Tour to set the time interval to show the live video in full-screen mode.

Snapshot:

The selected channel(s) will capture a picture when the current channel detects motion.

PTZ Activation:

The cameras don’t support this function.

PostRec:

The camera will remain to record the video around 10s after the motion or human shape detection ends. You can reset the time from 10s to 300s.

Show Message:

After enabling this function, the display will pop up a window to show the Alarm Status for all kinds of alarms when the cameras detect motion, human shape, or more.

Send Email:

Before enabling this function, please go to Main Menu > System > NetService, then double click on EMAIL option to set up your email address to receive the alerts.

Write Log:

The logs of the alerts will be written into the system once you enable this function. You can go to Main Menu > Info > Log to check the detailed log information.

FTP upload:

The system will send the videos recorded or snapshots captured to the FTP server you set when the camera detects motion. Please go to Main Menu > System > NetService, then double click on FTP option to set up your FTP server.

Mobile reported:

The system will send alerts to your mobile device when the camera detects motion. Please install the App and add the DVR to the App following the section of OPERATE DVR SYSTEM ON MOBILE DEVICE on page 18.

Up-to-Coaxial Control

Right click on the main menu and select XVI control to start setting up your camera.

※If the live video from the camera is mirrored or flipped, you can check the box before Mirroring or Overturn to fix it.

※If you set something wrong, please click Restore to get back to default settings.

.

NotesFor the setting of alarms like Video Blind, Video Loss, Human Detect and Face detection, please refer to the settings of Motion Detect. If prompting Video Loss, the DVR will not record videos, but only to send alarms.

TROUBLESHOOTING

The DVR System Boots Up Abnormally Or Reboots Automatically.

If the issue persists, please contact Support for more help.

.

How Should I Do If I Forget My Password?

• Please click Forgot Password when logging into the DVR system.

• The system will ask you the security questions you set in the Startup Wizard, please enter the right answer to reset your password.

• If you forget the answers, click Forget Answers to enter the interface of Verification Code.

• Launch XMEye App,tap > FIND PWD on an Android device or tap Forgot your device password?(on the interface of Add Device) > FIND PWD on an iOS device to scan the QR code on the left side to get a verification code, then enter it into the box on the interface of Verification Code to reset your password. However, if you set an email to get the verification code in Startup Wizard, the App will send the code to that email. You need to get it from email, then enter it on the interface of Verification Code.

.

How Long Can A Hard Disk Drive Record For This DVR System?

There are 4 AHD cameras connecting to this DVR system by default. These cameras are with the resolution of 1080P and variable bitrate which depends on the surveillance scenes. If the bitrate is around 2Mb/s, the corresponding size of the video file will be around 21G per day.

As a result, a Hard Disk Drive with the capacity of 1T may record around 12 days.

.

How Can I Connect An Extra Camera With The DVR System In Addition To The 4 Cameras In The Package?

DVR system supports up to 8 cameras to be connected. Please contact Hiseeu to get the same type of cameras and the corresponding cables.

If you just have a camera in hand, please follow the steps below:

For the camera with the format of TVI/CVI/SVI/CVBS, right click on the screen, select XVI&AHD to set the Signal of the channel to Auto or the corresponding format of your camera, then connect the camera with the DVR system.

For an IP camera, please go to Main Menu > System > Digital > ChannelType to check the box of the fourth line, then go back to the main screen and move the cursor to the channel you’d like

to connect the camera.

Click in the center of the screen to start adding the camera.

.

The Image From The Camera Is Upside Down.

Right click on the main screen and click XVI Control, then check the box before Mirroring or Overturn to flip the image.

.

What Should I Do If It Runs Out Of The Space On Your Hard Disk Drive?

The DVR system is set to loop recording by default, which means the latest videos will overwrite the old videos automatically when it runs out of the space on the Hard Disk Drive.
You can back up the important videos, then delete the videos or format the Hard Disk Drive.

.

Why Does The Hard Disk Drive Stop Saving Videos?

.

The App On My Mobile Device Cannot Receive Snapshots When The Camera Detects Motion, Human Or The Camera Gets Blocked, Etc.?

The App can receive the snapshots by default and you can check from Alarm Push/Alarm of the App.

.

Why Does The App Remind Me Of “Maximum Video Link”?

For remote viewing, such as from App or PC Client, you can only simultaneously access the live videos from 6 channels at most. Please close the unnecessary channel.

.

Why Doesn’t The PC Client Watch The Live Videos?

.

Why Doesn’t The PC Client Watch The Live Videos?

.

What Should I Do If I Got Too Many Push Notifications From App?

This DVR system can support to send you alerts when the camera detects motion, human, face, video feed loss,or the camera gets blocked. You can go to Main Menu > Alarm to disable certain kinds of alarms to reduce alerts.What’s more, you can lower the Sensitivity, set the Region and Period to reduce alerts.

.

How Can I Modify The Time Stamp And Channel Name Displayed On The Screen When Playing The Videos Recorded?

You can go to Main Menu > System > Display to select the channel you’d like to set, then enable Time Display and Channel Title, then click Set. You can even drag them to your desired position on the screen.

.

Looking for the best NVR? This guide will help you find the right one for you, help you through the jargon, and get your recorder at the best price.

NVR is short for Network Video Recorder, a device which acts as a hub for an IP-based security camera system. It is a storage and review point for your CCTV which means you don’t need to sign up to remote service to store your video.

That means, of course, it’ll need cameras, typically connected by power-over-ethernet (PoE) cables (see our guide to the best PoE cameras), and a storage medium like a hard drive.

Retailers often package the same NVR in several different bundles, mixing up the types and numbers of cameras and hard drives, or simply leaving this all to you. There are real bargains to be had with some of these all-in-one kits, and the only real downside is some spectacularly confusing product names.

An NVR, incidentally, is not quite the same thing as a DVR (or Digital Video Recorder), which appeared in the late 90s. They look similar and store video too, but a DVR is built to accept and digitally compress analogue or digital video via coax sockets; an NVR expects a digital input.

The advantage of an NVR-based security system is that, because the video is being compressed by the cameras, local processing power is available for AI functions like detecting movement. This, in turn, means you don’t need to dig into your wallet for a subscription service; both storage and AI analysis are provided by a device you own rather than a service you lease. 

Given that subscription services usually only store the clips their AI identifies as significant, having your own NVR may give you the power to review every moment yourself rather than being dependent on an algorithm to parse the events your camera sees. All the advantages of networking like remote access and – of course – the ability to work with all IP cameras, wired or wireless, remain.

We look at some of the key features in detail at the end, but something else to remember if you’re in the USA is the China trade war; major security player HikVision have already fallen victim to US internal bans on new products and may end up on the Specially Designated Nationals (SDN) list. 

Key features to look out for are remote access, PoE (Power over Ethernet), which can simplify wiring, hard drive capacity (indeed if any drives are included at all), the resolution limit, the number of channels or cameras it can handle, and if there are any means of backup. Remember that a 4K camera uses more data throughput than a 1080P one, so an NVR can handle fewer of them – this is where the compression method (e.g. H.264 or H.265) can make a big difference.

Best NVR in 2023

Why you can trust Digital Camera World  Our expert reviewers spend hours testing and comparing products and services so you can choose the best for you. Find out how we test.

(Image credit: Adam Juniper/Digital Camera World)

1: EufyCam HomeBase 3

The EufyCam HomeBase 3 and various bundles bring the glossy consumer experience of IP cameras like those from Google or Nest – including AI-like face detection – but don’t leave you paying every month. This device also has a home-friendly design so you can leave it on a countertop (good if you have limited space near your router).

Some security pros might not appreciate the non-traditional approach with only clips recorded when the cameras detect motion. The flip side is that the NVR is a more accessible experience. Even without adding a hard drive the 16GB included will likely capture a couple of months of ‘events’ (clips by triggered movement) from your cameras; add a drive and that can go up to a lifetime. It also means the cameras can be installed wirelessly, with battery power, meaning getting up and running is virtually painless. We especially liked the S330 eufyCam 3 bundle with solar-powered 4K cameras featuring floodlights and night vision

.

(Image credit: Amcrest)

2: Amcrest 5 Series NV5232E-16P

Best DVR for multi-brand compatibility

While not everyone will need the 320Mbps throughput, if you’re looking for a powerful NVR which affords some flexibility when it comes to choosing your cameras (and don’t mind paying for that) then the Amcrest 5 Series seems to have that in the bag. Eight of the sixteen Ethernet sockets are PoE, likely enough for most customers though it seems a shame they weren’t all enabled.

We certainly can’t complain about the level of effort which seems to have gone into usability in what is not always the most user-friendly product category; a great example is the QR codes to bring up quick remote viewing via the Amcrest View app.

The device is certainly not the cheapest on this list, given the list price doesn’t’ include a hard drive and you’ll need at least one – likely two unless you opt for the motion detection mode. It does, however, offer some of the features of subscription services via the app and web features, as well as the advantages of a hardwired device; not to be sniffed at.

.

3: Swann AllSecure650

Best NVR for uninterrupted security

Swann has always built innovative systems, and this is no exception. Adopting an elegant upright design, the NVR PowerHub is the basis of several new Swann packs including the AllSecure650. We like this system not only because of the elegant design, but because it offers so many options in a small package. It also, brilliantly, turns the main annoyance of battery camera systems to its advantage; an extra battery is included (total of 3 for a 2 camera bundle).

The extra battery lives in the hub, where it not only charges but offers backup power backup in case of an outage. When you need to swap a camera battery you have a spare, ready to go, so you can swap it with one – rather than two – trips up the ladder to the camera.

It does not, however, ditch all the functionality of a traditional NVR as it attempts to blend into the home or small business. While you can control nearly everything via the app, as well as enjoy remote access, there is also a mouse socket and HDMI port for use with a monitor. The supplied 1TB storage will also manage 2 years of clips by Swann’s reckoning, after which you can opt for Dropbox or USB transfer. 

Best NVR camera systems 2023

Read More : Best Night Vision Security Cameras

.

(Image credit: Synology)

4. Synology Deep Learning DVA1622

Best AI NVR for homes and small businesses

Synology offer multi-drive RAID storage systems – many which can take on a little monitoring on the side – and devices like this built with it front and center. There is the power to drive AI on up to 16 streams of video including separating people from animals, intrusion detection and even license place recognition. Businesses can even use the AI system to detect whether face mask rules are being complied with. This AI also helps distinguish threats in poor lighting thanks to the GPU power. Recording can be backed up across drives or both can form a single volume

As well as HDMI connection for a monitor, the device can be reached remotely via iOS and Android apps and on virtually any computer via a browser interface. The USB 3.2 ports (front and back) offer keyboard and mouse connection.

This is a great choice for smaller installs, but bigger businesses might need something like the 4-drive FVA3221.

.

(Image credit: Reolink)

5: Reolink RLK8-800

Best DVR for reviewing video history

Despite having only one SATA bay, the Reolink system makes a lot of room for storage by adding an eSATA socket at the back. The system is also typically bundled with its preferred Reolink 4K cameras which provide stand-out sharp footage which is easy to review thanks to the fresh modern interface. Reolink also offer a great variety of cameras and a doorbell.

Built-in operating systems can be a tad clunky, but connect the supplied mouse to the NVR and the Reolink interface, whether on 4K TV or VGA screen, is a bit clearer. The 24/7 recording is accompanied by a timeline which highlights events (people or vehicles) and can be filtered as you browse. While it doesn’t sound a lot, in practice most CCTV reviewing is for these things.

When connected to your local network via the LAN socket, assuming an internet connection, the system can use the same alert tech to send specific activity alerts to your devices.

(Image credit: Annke)

6: Annke 4K 8CH PoE NVR

Best NVR for affordable plug-and-play

Clearly built for practicality, the Annke H800 makes connecting a USB drive easy without re-positioning by adding an extra USB socket at the front as well as the rear one for the mouse.

The in-built OS isn’t beautiful, but actually very smart; you can choose to disable motion detection by zone on each camera view and, even as you refine the detection, you see a handy live view of where the algorithm is spotting action. Other handy features include quotas for individual cameras to prioritize some recordings drive vapacity.

The system includes event-driven or “Smart” timeline review of recorded video, the latter allowing you to search video for movement within areas you specify – a handy tool for finding if someone went into a specific corner of the shot after the fact.

Phone integration for Android or iOS also brings notifications though only one user account can be connected.

.

(Image credit: Swann)

7: Swann SRNVR-88580H

Best DVR for AI features

What shines out with the Swann system is the more advanced facial recognition tools which put person/vehicle recognition in the shade. Yes, generalized person or vehicle alerts are still very useful, but Swann allows the known faces can be named. That makes specific alerts possible if, say, one of the kids gets near the treats. That is the kind of benefit consumer smart cameras offer, built on with integrations with Alexa and Google Assistant, but without the cost of a subscription.

A third USB socket covers mouse, backup drive and downloading to a USB stick
without needing to unplug anything – usability plus. 

On the down-side, pet detection does require a cloud subscription (perhaps that just feels a worrying threshold to cross). In reality the fact Swann offer a cloud option – and secure backup using it – will be a handy option for some, even if it does bring with it a monthly fee. Swann’s Enforcer Kit system also has a number of 4K CCTV cameras with red and blue flashing LEDs and sirens built in which can be acquired in a bundle with the NVR for an effective deterrent system. 

.

(Image credit: Lorex)

8: Lorex D861A82B 4K DVR

Best NVR for smart home integrations

This elegant-looking NVR actually has the same sockets as most other 4K 8-channel systems from the back, but is chic enough to sit comfortably under a living room TV. There the central panic button, which triggers all lights & sirens built into connected cameras, could end a home invasion.

The main Lorex NVR software also allows you to set up effective deterrence rules using person and vehicle detection and features area search for easier review.

There is a similar level of design polish in the remote access app save for one thing; if you do connect wireless and wired cameras you’ll need to tidy up the alerts yourself to avoid duplicates. 

We also appreciated that the Apple TV wasn’t forgotten; and smart home fans will love the ability to add sensors (like gate or door opening) as well as cameras via a Lorex Sensor Hub.

.

.

(Image credit: Synology )

9. Synology DS923+

A RAID system with security-friendly extras

As well as dedicated NVRs, Synology are synonymous (sorry!) with all sizes of data storage devices. While many entrust their data – especially with limited amounts of it – to the cloud, there are many reasons to have a physical backup system. Hot-swappable drives mean every piece of information can be backed up within the device, and a network connection means it is available via your home network, or remotely.

Since the machine is essentially a small computer, it can run apps on its own OS, from Mail Server to (more relevant here) Synology Surveillance Station. This lets you use some of your overall drive space to store video from your connected security cameras.

.

(Image credit: CanaKit)

10. CanaKit Raspberry Pi 4

For those who want to make security a hobby experience

Make no mistake, this is not the same approach as the other products on this list. This isn’t a ready-made box with all the necessary PoE sockets to connect a series of cameras to but, since an NVR is essentially just a computer in different clothes, it shouldn’t come as a surprise that the enthusiast community is continuously refining software to power NVRs.

If you feel motivated to build your own, why not start with a Raspberry Pi 4? Unless you’re only using USB cameras, you’ll also need a PoE Ethernet Switch (like the BV-Tech) and certainly some kind of storage (it’s unlikely the microSD card slot in the Pi will cut it for long, but many folk already have a spare external hard drive lying around). From there it’s simply a matter of choosing an OS and a piece of software; Shinobi is available for free and supports ARM architecture, as does ZoneMinder, so there are two good starting points. 

.

.

(Image credit: Amcrest)

11. Amcrest 4K NV4216E-AI

Best NVR for big multi-camera set-ups

If you need a more powerful NVR – with greater camera capacity – than the NV4108E above, then Amcrest have you covered; the 4216E-AI supports up to two 8GB drives inside and has 16 PoE ports for cameras on the back, all capable of 4K resolution. The system is happy with H.265 and H.264 and has a high-speed throughput of 200Mbps, dropping to 80Mbps when the on-board AI functions are active. This sacrifice buys you human and vehicle detection (and search in recordings), offering functionality to compete with the subscription services from Google Nest and Amazon Ring among others. Amcrest’s App is similar in scope. The machine even has microphone sockets for two-way-talk from the NVR.

.

(Image credit: xmartO)

12. xmartO WNQ28

Wi-Fi NVR which can keep your CCTV separate from home network

If you’d like to install a CCTV system with some of the advantages of your own NVR, but aren’t interested in undertaking the cabling, then the WNQ28 seems a rational choice. It eschews the PoE network switching components in favor of two antenna to create its own wi-fi network which you can connect cameras and viewing devices to. xmartO also include their “G3 Auto WiFi Relay” feature which can use cameras to extend the network.

With or without this, the advantage of this device is that it keeps CCTV cameras on a different frequency from your home’s potentially already heavily taxed wi-fi (an issue many of us are starting to notice as high-speed broadband becomes more common). On the down-side it offers a fairly generic Linux-based OS and doesn’t have high bandwidth, while it definitely prefers xmartO cameras. Nevertheless it definitely helps keep things separate when building your network, so we can see some DIY fans strongly preferring this.

How to choose an NVR system

Selecting an NVR forces you to think about the very heart of your security system, and the choice you make will depend on whether you’re starting from scratch or you already have cameras you need to connect to. In either case, make the right choice and it’ll offer years of use even though you add and swap cameras and hard drives.

.

.

ALIBI Vigilant NVR User Manual, This manual describes how to use your NVR locally and on the Web interface.
In this manual, the terms “IP camera” and “IPC” both refer to “network camera”, which requires a connection to the network. The IP device mentioned in this manual refers to either an IP camera (also known as network camera) or a Digital Video Server

Preface

This manual describes how to use your NVR locally and on the Web interface.

In this manual, the terms “IP camera” and “IPC” both refer to “network camera”, which requires a connection to the network. The IP device mentioned in this manual refers to either an IP camera (also known as network camera) or a Digital Video Server (DVS).

9

.

Part I Local Operations

An NVR supports two types of operations: local operations and web-based remote operations. With local operations you connect a monitor and a mouse to the NVR and use the mouse to operate the system. If your NVR has buttons on the front panel or is delivered with a remote control, you may also control your NVR by pressing the front panel buttons or using the remote control.

The NVR has an embedded web server that allows web-based operations. To do this, you need a PC that has a network connection to the NVR and is installed with a web browser. You just need to navigate to the NVR’s IP address and log in to the Web interface like you log in to the system locally.

This section describes local operations.

10

.

1 before you begin

Please be aware that the parameters that are grayed out on the system user interface (UI) cannot be modified. The parameters and values displayed may vary with device. Figures in this manual are for illustration purposes only.

User Login

Use the default username admin and password 123456 for your first login.

j^ CAUTION!

The default password is intended only for the first login only. It should be immediately changed to a strong password. Strong Passwords contain at least nine characters that include letters, numbers and special characters.

Local Operations

You can refer to Initial Configuration and complete a quick configuration.

NOTE!

Unless otherwise specified, all operations described in this manual are performed with a mouse by the right hand. See Mouse Operations for details.

11

.

Mouse Operations

Table 1–1 Mouse Operations

Front Panel Buttons

The front panel buttons may vary with NVR model.

Table 1–2 Front Panel Buttons 1

12

.

Table 1–3 Front Panel Buttons 2

13

.

14

.

Remote Control

Table 1–4 Functions of the Buttons on the Remote Control

15

.

ALIBI Vigilant NVR

.

2 initial configuration

Preparation

Device Login

The login page appears after the NVR starts up.

17

.

Login

Please change the default password. Change now?

No

Change Password

Username  admin

Old Password

Password  Weak

Confirm

OK  Cancel

18

.

Note:

To disable unlock pattern, click System > User. See User
Configuration for details.

Wizard

The wizard can guide you to complete the most basic setup. The following page appears after your login:

19

.

Note:

20

.

3 live view

Live View Status

The following icons are used to indicate alarms, recording status, and audio status in a live view window.

Table 3–1 Live View Window Icons

Window Toolbar

21

.

Screen Toolbar

22

.

Shortcut Menu

A shortcut menu as shown below appears when you right-click in a window. Some menu items are described in Shortcut Menu Description.

Table 3–2 Shortcut Menu

Table 3–3 Shortcut Menu Description

23

.

Sequence Operation

The sequence operation requires you to configure the screen layout, windows, linked cameras, and the sequence interval.

This example describes how to configure sequence for five cameras based on a 4-window screen layout.

NOTE!

The number of windows that can be displayed may vary with NVR
model.

24

.

NOTE!

Zoom

Zoom in on an area of images in a window for details.

Preview Configuration

Normally, live view (video) is available after you complete the basic setup by following the wizard. You can click System > Preview and edit preview setting as needed, including video output, image resolution, default layout, and sequence interval. The video output and the number of windows supported may vary with NVR model.

NOTE!

Pressing and holding the scroll wheel for at least 3 seconds will
restore the default resolution.

Preview Configuration

Each preview window (window for short) links to a camera. By default, window 1 links to camera D1, window 2 links to camera D2, and so on. You may want to change the link to display live video from a camera in another specified window. The following example describes how to link window 1 to camera D2 and link window 2 to camera D1.

26

.

Step 1: Click window 1 on the right, and then click D2 under Camera on the left. Now D2 appears in window 1, and None appears in window 2. Meanwhile, o is cleared for camera D1, meaning D1 is not linked to any window.

Step 2: Click window 2 on the right, and then click D1 under

Camera on the left. Now D1 appears in window 2. Click Apply to

save the settings.

Advanced Configuration

Click the Advanced tab and then select Sub Stream First so the NVR uses the sub stream to establish live video from multiple cameras simultaneously. This function is disabled by default.

ALIBI Vigilant NVR User Manual

Read Next : Alibi Recorder Firmware

.

4 channel configuration

Channel Management

This chapter describes how to add and manage IP devices in your NVR. The IP devices mentioned in this manual mainly refer to IP camera (or network camera); sometimes they can also be Digital Video Server (DVS). Before you start, make sure the IP devices are connected to your NVR via network.

CAUTION!

An IP device should be connected to one NVR only. An IP device managed by multiple NVRs may cause unwanted issues.

Adding an IP Device

This section provides multiple options to add an IP device. Some options are only applicable to certain NVR models. Choose one as appropriate.

Option 1

28

.

NOTE!

For a Digital Video Server (DVS), a window appears when you click
Add, and you need to select channels to add the connected
cameras.

Option 2

This option is not applicable to NVRs with PoE ports or switching ports.

Option 3

This option is only applicable to NVRs with PoE ports or switching ports. Connect an IP camera to a PoE port or a switching port with a network cable. The connected camera will be added to the NVR

automatically. Check status under Camera > Camera > Camera.

0 means live video from the camera is available. Click © to view

live video.

If the camera is connected via a network switch, click ışı under

Cam Config in the window displayed, set Add Mode to Manual

and then complete the settings correctly.

NOTE!

» appears under Status if the power output from a PoE port is
below or above the rated power of the connected camera.

Option 4

Use this option to add an IP device that is connected to a different router, for example, when the NVR and the IP device are connected across the Internet.

29

.

NOTE!

First you need to enable port mapping at Setup > Port > Port
Mapping on the IP device’s Web interface.

• By MyDDNS

a. On the IP device’s Web interface, go to Setup > Network > DDNS, enable DDNS, select MyDDNS, set a domain name and get the server address.

NOTE!

• By a domain name

30

.

NOTE!

Option 5

Use this option only when the IP device to add supports the standard RTSP, and all you need from the IP device are just view live and playback. IP devices added in this way cannot be configured from the NVR.

Sort Cameras

Sort cameras to display in the desired order.

32

.

NOTE!

33

.

NOTE!

Fisheye Configuration

Only certain NVR models can dewarp images from fisheye cameras.

NOTE!

Fisheye configuration is supported only by certain fisheye
cameras.

Configuration

Dewarping

NOTE!

Dewarping is available in live view and playback (in normal and
corridor playback modes). The operations are similar. The
following describes dewarping in live view.

Click Fisheye Mode on the window toolbar. The figure below appears. Set mounting mode and display mode.

Fisheye Mode x

Mount

Display Mode

Three mounting modes are available: ceiling, wall, desktop. Ceiling and desktop mounting modes use the same dewarping

35

.

Operations Example: Ceiling Mount and Fisheye+3PTZ camera

On a PTZ image, drag the mouse to rotate the image or use the scroll wheel to zoom in or out. A box appears on the fisheye image as the image rotates, and as you drag the box or move the scroll wheel on the fisheye image, the corresponding PTZ image rotates or zooms in or out as well.

36

.

Advanced Functions

Upgrade connected IP cameras or restore factory default settings for cameras under Camera > Camera > Advanced.

Click Check to see if the version of the connected IP camera is up to date. You may upgrade cameras by cloud ( ) or by disk ( ) one by one, or select multiple cameras and then click Upgrade by Cloud or By Disk to upgrade cameras in batches.

OSD Configuration

On Screen Display (OSD) are characters displayed with video images, for example, camera name, date and time, and people counting statistics.

Click Camera > OSD; or click

on the preview window toolbar.

NOTE!

If camera name exceeds 20 characters, only the first 20 characters
will be used as the OSD camera name.

• If camera name exceeds 20 characters, and you want to overlay a different camera name on video image:

Image enhancement

Exposure

1. Click the Exposure tab.

40

.