DVR

VR-X Series

Software

VMS v.231 (Windows)

1 file(s)  50 MB

DOWNLOAD

.

VMS v.336 (Windows)

1 file(s)  57 MB

DOWNLOAD

.

VMS v.344 (Windows)

1 file(s)  82 MB

DOWNLOAD

.

VMS (MAC)

1 file(s)  2.5 MB

DOWNLOAD

.

User Manual

.

VR-X User Manual

1 file(s)  6 MB

DOWNLOAD

.

Read More :

NVR

VPRO-NVR-X Series

Software

.

.

ConfigTool

1 file(s)  24 MB

DOWNLOAD

.

.

.

Ionvision Corp.

1 file(s)  67 MB

DOWNLOAD

.

Veilux

.

VEILUX APP

1 file(s)  35 MB

DOWNLOAD

.

User Manuals

.

.

AI NVR User Manual

1 file(s)  27 MB

DOWNLOAD

.

.

.

Ionvision Corp. User Manual

1 file(s)  6.5 MB

DOWNLOAD

.

VPRO-NVR-X-U Series

.

2M Station (Windows)

1 file(s)  48 MB

DOWNLOAD

.

VX-NVR-X Series

Software

.

Tools

1 file(s)  20 MB

DOWNLOAD

.

IP Cameras

Camera Tools

.

.

2M Tool

1 file(s)  29 MB

DOWNLOAD

.

.

.

ConfigTool

1 file(s)  24 MB

DOWNLOAD

.

.

.

General IP Search Tool

1 file(s)  6 MB

DOWNLOAD

.

Veilux

.

pConfig

1 file(s)  3 MB

DOWNLOAD

.

.

.

ONVIF Device Manager

1 file(s)  20 MB

DOWNLOAD

.

.

.

Tools

1 file(s)  20 MB

DOWNLOAD

.

Veilux

.

Update Tool

1 file(s)  5 MB

DOWNLOAD

.

User Manuals

.

.

VPIP-5MIR30X-PRO User Manual

1 file(s)  2 MB

DOWNLOAD

.

Keyboards

VKPRO-N1000

.

.

VKPRO-N1000 User Manual

1 file(s)  882 KB

DOWNLOAD

.

Veilux

Veilux Firmware

Note: Please be careful when updating firmware as there is a risk of damaging the device if the update is not done correctly.

Box Cameras

.

VSIP-2-W

1 file(s)  26 MB

DOWNLOAD

.

Bullet Cameras

.

VBIP-2E v3.5

1 file(s)  22 MB

DOWNLOAD

.

.

VBIP-2E v3.6

1 file(s)  28 MB

DOWNLOAD

.

.

VBIP-2V

1 file(s)  35 MB

DOWNLOAD

.

.

VBIP-2V-H5Z

1 file(s)  29 MB

DOWNLOAD

.

.

VBIP-2V-I

1 file(s)  34 MB

DOWNLOAD

.

.

VBIP-2V-IZ-PRO v2.6

1 file(s)  22 MB

DOWNLOAD

.

.

VBIP-2V-IZ-PRO v2.8

1 file(s)  24 MB

DOWNLOAD

.

.

VBIP-2V-M-H

1 file(s)  27 MB

DOWNLOAD

.

.

VBIP-2V-M-H5Z

1 file(s)  29 MB

DOWNLOAD

.

.

VBIP-2V-W

1 file(s)  29 MB

DOWNLOAD

.

.

VBIP-4V-H5Z

1 file(s)  39 MB

DOWNLOAD

.

.

VBIP-4V-I

1 file(s)  26 MB

DOWNLOAD

.

.

VBIP-13V

1 file(s)  35 MB

DOWNLOAD

.

Dome Cameras

.

VDIP-2VH v2.0

1 file(s)  32 MB

DOWNLOAD

.

.

VDIP-2VH v3.4

1 file(s)  28 MB

DOWNLOAD

.

.

VVIP-2E

1 file(s)  22 MB

DOWNLOAD

.

.

VVIP-2V-E

1 file(s)  29 MB

DOWNLOAD

.

.

VVIP-2V-I

1 file(s)  34 MB

DOWNLOAD

.

.

VVIP-4V-E

1 file(s)  29 MB

DOWNLOAD

.

.

VVIP-4V-I

1 file(s)  26 MB

DOWNLOAD

.

.

VVIP-4V-IZ-PRO

1 file(s)  24 MB

DOWNLOAD

.

Fisheyes

.

VFIP-12M-PRO

1 file(s)  29 MB

DOWNLOAD

.

PTZ

.

VPIP-MINI-3M12X

1 file(s)  44 MB

DOWNLOAD

.

.

VPIP-3MIR30X v3.4

1 file(s)  34 MB

DOWNLOAD

.

.

VPIP-3MIR30X v3.5

1 file(s)  26 MB

DOWNLOAD

.

.

VPIP-5MIR36X-120-PRO-E

1 file(s)  9 MB

DOWNLOAD

.

.

VPIP-13M22X

1 file(s)  35 MB

DOWNLOAD

.

DVR

.

VR-5B-16S-2

1 file(s)  58

DOWNLOAD

.

.

VR-824E

1 file(s)  12 MB

DOWNLOAD

.

NVR

.

VPRO-NVR-4

1 file(s)  50 MB

DOWNLOAD

.

.

VPRO-NVR-32

1 file(s)  66 MB

DOWNLOAD

.

.

VPRO-NVR-64N

1 file(s)  101 MB

DOWNLOAD

.

.

VPRO-NVR-64R

1 file(s)  101 MB

DOWNLOAD

.

.

VPRO-NVR-128

1 file(s)  104 MB

DOWNLOAD

.

.

VPRO-NVR-128N

1 file(s)  127 MB

DOWNLOAD

.

.

VX-NVR-32

1 file(s)  60 MB

DOWNLOAD

.

.

Keyboard Quick Start Guide

About the Manual

This series keyboard has the following features

Besides above mentioned features, network keyboard also has the following features:

The keyboard front panel is shown as below. See Figure 1-1.

Figure 1-1

Please refer to the following sheet for detailed information.

.

.

1.3.1 Network Keyboard Series

Please refer to Figure 1-2 for network keyboard port information.

Figure 1-2

Please refer to the following sheet for detailed information.

1.3.2 Analog Keyboard Series

Please refer to Figure 1-3 for analog keyboard port information.

Figure 1-3

Please refer to the following sheet for detailed information.

1.3.3 Speed Dome Keyboard Series

Please refer to Figure 1-4 for speed dome keyboard port information.

Figure 1-4

Please refer to the following sheet for detailed information.

within 10m.

The keyboard uses DC12V 1A, you can use the adapter included in the accessories bag.

Figure 2-1

Note

After you exit the system, unplug the power cable to turn off the device.

The menu may vary due to different products. The following figure is based on the network keyboard.

The main menu list is shown as below. See Figure 2-2.

MENU

Figure 2-2

Use the joystick on keyboard to move up/down/left/right to select items.

Use keyboard to input number or character to set parameters.

Click [ENTER] to confirm current operation. Click [ESC] to exit.

The system manager includes time setup, network setup, address setup, aux setup, system update and logo update. See Figure 2-3.

Figure 2-3

It is to set keyboard system time. It includes year, month, date, minute and second. See Figure 2-4.

0: 2015 123

M: 7

D: 16

Mode: 12

Figure 2-4

Figure 2-5

The address value ranges from 0 to 255. The default setup is 0. When there is cascade connection, the 0 has the highest priority and the 255 has the lowest priority. See Figure 2-6.

Lddress

Figure 2-6

It is to set screen backlight and auto logout function. See Figure 2-7.

on

AutoLogout: Off

Figure 2-7

Do not remove the flash disk during the whole process. Otherwise it may result in upgrade failure and the network keyboard can not boot up properly.

Please select system update interface and click [ENTER] button to go to the update interface. Follow the prompt to click the [ENTER] to update.

Please contact your local retailer or visit our official website to get the Windows upgrade tool. The REC Upgrade or REC Upgrade are both OK. If the ConfigTool can not search the keyboard, please upgrade manually.

Now we use REC Upgrade for an example. The interface is shown as below. See Figure 2-8.

Figure 2-8

Note

If you can not use the 37777 to upgrade, it means the application layer did not boot up properly. Please use port 3800 to upgrade. The upgrade process can become successful no matter the application layer properly booted up or not.

2.3.1.6 Logo update

The logo upgrade function is for speed dome keyboard or analog keyboard series product. You can update logo.bin file if necessary.

It is to set control point information. See Figure 2-9. All the items listed below shall be set. You can use the ID, device name, COM address or the IP address to search a device easily in chapter 2.4.

Figure 2-9

Figure 2-10

When your link mode is net, please input corresponding administrator password to login.

Please go to the controlled device to set the user name and password. The DVR and NVR have the rights management to realize password verification.

Here is for you to change password, add user, and delete user and its rights. See Figure 2-11.

©Modify FW

©Add User

©Del User ©Modify Rights

Figure 2-11

Select a user and then input new password. Usually we recommend 6-digit password and you can change the input method to input password value. Input password again to confirm. You can see the corresponding dialogue box if your two passwords input here are not the same. Please click [ESC] to return to modify and click [ENTER] button to save. See Figure 2-12.

Figure 2-12

Please input user name (max 8-digit) and then set corresponding password. The group options include user/guest. See Figure 2-13,

Figure 2-13

• PTZ Control

OBackup

OAdvanced

Figure 2-14

Note

Please go to the controlled device to set rights.

Select a user first and then click [ENTER] to remove.

It is to change user rights.

Note

The configuration files import/export function is for speed dome keyboard and analog keyboard series product only.

The configuration manager includes configuration files import/export, clear zones and factory default setup. See Figure 2-15.

©Import

©Export ©Clear Zones ©Default

Figure 2-15

Insert the flash disk that contains the upgrade files to the keyboard and the go to the import interface. Click [ENTER] to import the configuration files.

Insert the flash disk to the keyboard and then go to the export interface. Click [ENTER] to export the configuration files.

Go to the clear zones interface and then click [ENTER] to clear all control points.

Go to the default interface and then click [ENTER] to restore keyboard configuration to factory default setup.

It is for you to view current version information and etc. See Figure 2-16.

Version:

Build Date: 2015-07-16

Figure 2-16

2.4 Zones

In this interface, you can quickly search a device via device ID, device name, COM address, IP and etc. See Figure 2-17.

Figure 2-17

3 Keyboard Control Speed Dome

Please connect keyboard A/B line to speed dome A/B line connection.

Note

On the keyboard, click [ID] to go to the control point interface to set speed dome ID to connect to the speed dome.

After successful connection, the interface is shown as below. See Figure 3-1.

Figure 3-1

On the keyboard, click [IRIS] button, use button [+]and[-]or turn joystick up/down to control the iris.

On the keyboard click [FOCUS] button, use button [+]and[-]or turn joystick left/right to control the focus.

On the keyboard click [ZOOM] button, use button [+]and[-]or turn joystick clockwise or counter clockwise to control the zoom.

Shortcut Mode

[PRESET], the interface is shown as below. See Figure 3-2.

On the keyboard click

Figure 3-2

Input preset number and then select [Set], click [ENTER] to save preset setup.

Input preset number and then select [Goto], click [ENTER] to go to the corresponding preset position.

Input the preset number and then select [Del], click [ENTER] to remove it.

Shortcut Mode

On the Use mode, use keyboard to input [No.]+[Scan], you can call a scan. Click [Scan]to stop it.

General Mode

On Set mode, click [SCAN] button, the interface is shown as below. See Figure 3-3.

Scan

Stop Set

Figure 3-3

Please follow the steps listed below.

Scan Set

Set Right

Figure 3-4

Shortcut Mode

On the Use mode, click [Pan]button on the keyboard, the speed dome begins pan. Click [Pan]again to stop it.

General Mode

On Set mode, click [PAN] button on the keyboard, the interface is shown as below. See Figure 3-5.

Fan

Stop

Figure 3-5

Shortcut Mode

On the Set mode, use keyboard to input [No.]+[Tour], you can call a tour. Click [Tour] again to stop it.

General Mode

On Set mode, click [TOUR] button on the keyboard, the interface is shown as below. See Figure 3-6.

Del

Figure 3-6

3.3.6.1 Set tour

TourNo. : 0

‘resetNo.

PresetAdd PresetDel

Figure 3-7

Note

You can add several presets to add to a tour.

3.3.6.2 Call tour

3.3.7 Pattern

Shortcut Mode

On the Use mode, use keyboard to input [No.]+[Pattern], you can call a pattern. Click [Pattern]again to stop it.

General Mode

On Set mode, click [PATTERN]on the keyboard, the interface is shown as below. See Figure 3-8.

Figure 3-8

Select pattern No. and then input a pattern number, select start and then click [ENTER] button, system begins pattern operation.

Select pattern No. and then input a pattern number, select stop and then click [ENTER] button, system stops pattern operation.

Note

Please refer to chapter 8 to make COM cable.

The default setup is shown as below.

Please note keyboard setup should conform to DVR setup.

Note

The network connection steps are similar to the COM setup. Please note, on the zones interface, the link type shall be NET.

Please input DVR IP address, the control point port is 37777. The protocol is the same as the COM setup. Please refer to chapter 2.3.2 control point for detailed information.

The DVR local user has the higher priority than the keyboard user. Before you login, please logout the DVR local menu user, otherwise, you can not use the keyboard to control the device.

You can select ID, device name, IP address, RS232, RS485 and etc to login.

System auto connect to the DVR after successfully search operation.

Tips

Click [ID] on the keyboard and then input ID number. Click [ENTER] to quickly find the device.

Click [ID] on the keyboard and then click [ESC] to exit current menu.

For example, input 16 and then click split button, you can realize 16-split function on the DVR.

If you use the joystick now:

Input 9 and then click CAM button, the DVR displays the video from channel 9.

Click [PLAY] on the keyboard, you can go to the DVR search interface. Use joystick to control the playback buttons such as stop, fast play, slow play and etc. Click [ENTER] to confirm. See

Figure 4-1.

Figure 4-1

.

Login the Web of the decoder, you can see the following interface. See Figure 5-1.

Figure 5-1

Click the Splicing wall on the left pane; you can go to the following interface. See Figure 5-2.

Click Fast splicing button, you can realize 1 X1 setup conveniently.

For the network keyboard, it support 2X2 and etc splicing setup. Please follow the steps listed below.

Figure 5-2

In Figure 5-2.click Info manager button, you can view and edit the corresponding screen control SN.

For network keyboard, click the [Control ID] + [PLAY] one by one, you can select the output screen quickly. See Figure 5-3.

Figure 5-3

Login the WEB of the decoder, from [Setting] -> [Remote device] , you can add the

corresponding input source. Click the edit button — ,you can edit the correspondong control SN.

See Figure 5-4.

For network keyboard, click the [Control ID]+[CAM], you can output the video to the TV wall.

Figure 5-4

Please refer to chapter 2.3.2 Zone (control point) for detailed information.

The device type is NVD and step default value is 64.

Please refer to chapter 8.1 to use RS232 COM to connect the network keyboard to the analog matrix.

Network keyboard can control the analog matrix to realize the following function. See Figure 6-1.

Figure 6-1

screen.

keyboard control point setup.

When you are using the network keyboard to control the analog matrix, please click the [No.]+ [CAM], you can use the front panel of the matrix to switch the video.

For example, click [016]+[032]+[CAM], you can switch the 32nd channel video input of the front panel of the matrix to the 16th output channel.

Note

Please refer to chapter 2.3.2 Zone (control point) for detailed information. The device type is

MATRIX.

Login the WEB of the video matrix platform (M60/M70), and then select splice control you can go to the following interface. See Figure 7-1.

The network keyboard supports TV wall combination on the video matrix platform. You can add the video wall you want to control as the splicing screen and then add the plan for each TV wall.

• Follow the steps listed below to add the plan.

• Follow the steps listed below to control the splicing screen.

Click [Cancel], you can cancel the splicing operation.

Figure 7-1

Login the Web of the video matrix platform (M60/M70).

For network keyboard, click the [Control ID] + [CAM] one by one, you can output the video

on the wall to preview.

Figure 7-2

Figure 7-3

Please refer to chapter 2.3.2 Zone (control point) for detailed information.

The device type is DVM and step default value is 64.

8 Make COM Cable

Please refer to the following figure to make RS323 cable.

When use the network keyboard to control the analog matrix, RS232 Com adopts the straight mode: 2-2, 3-3, 5-5. Straight through connection mode is shown as in Figure 8-1.

Figure 8-1

When use the keyboard to control other device, RS232 Com adopts the crossover connection mode: 2-3, 3-2, 5-5. Crossover connection mode is shown as in Figure 8-2.

Figure 8-2

Note

time, please use RS485 mode.

can connect to 8 DVRs.

You can refer to Figure 8-3 if you are connecting the keyboard with the switcher box.

RS485 Port of Keyboard

RS485 Switch Box Port

(Green alarm socket)

(6-pin crystal )

Figure 8-3

RS232 Port

(DB9)

Figure 8-4

Connect switch 25-pin box RS232 port with DVR RS232 port. (25-pin outlet supports maximum twelve RS232 ports. Switch is just for sending not for receiving. So you can use two cables: GND and TXD)

Please refer to the following figure if you are connecting 485 switch box to DVR See Figure 8-4.

Note

485->232 switch box does not need the TXD cable. The 1 to 8 COM port already supports this function.

RS485 Switch Box 25-Pin Port

(DB25)

If you are using network keyboard, you can use the network to connect. The direct connection mode is shown as below. See Figure 8-5.

Network Cable (Crossover)

DVR

Figure 8-5

Please refer to the following figure if you are connecting via the hub. See Figure 8-6.

Figure 8-6

Note:

How to Update Uniview Cameras Firmware, It’s important to keep your camera’s firmware upgraded to the latest version for a variety of reasons. Occasionally, vulnerabilities are discovered in the firmware which can be exploited by malicious users. For example, in 2021 Uniview published a security notice regarding a buffer overflow vulnerability, along with steps to mitigate it. Their recommendation was to update the affected devices to the latest firmware, which fixed the exploit.

Another reason for updating firmware is to enable new features which are added to the camera software. One example is the 5MP Active Deterrence PTZ, which gained the ability to perform auto-tracking after a new firmware was released in 2021. Leo Xu from Uniview said this about firmware upgrades: “We do a major update every quarter and a minor update every month. Every product has some differences.”

How to Perform a Firmware Upgrade – Via EZTools 2.0

Now that you understand the importance of a firmware upgrades, you’ll want to know how it’s done. The easiest way to upgrade your camera’s firmware is via EZTools 2.0; Uniview’s robust camera configuration tool. You can download that from the support section of our website

After installing EZTools 2.0, open the software and follow the steps below to update your Uniview cameras’ firmware:

If you selected an NVR during steps 1 and 5, you will be able to upgrade all cameras added to the NVR during step 6. So, this method makes it very quick and easy to perform a firmware upgrade.

.

How to Perform a Firmware Upgrade – Via Web Interface

Another way to perform a firmware upgrade is via the web interface of the camera. To access the web interface of the camera, use EZTools 2.0 to find the local IP of the camera and enter it in your web browser. Or, you can click the “Remote Web” icon to automatically open the camera in your default browser.

Login to your camera via the web interface; you may have to change the default password first. Once logged into the camera, navigate to Setup -> System -> Maintenance. You’ll see two options under Software Upgrade: “Local Upgrade” and “Cloud Upgrade”. If you already have the latest firmware package on your computer, choose “Local Upgrade” otherwise use the cloud upgrade function by clicking “Detect”. If a new firmware is available, the button will change to “Cloud Upgrade”; click it again to update the camera to the latest version.

How to Perform a Firmware Upgrade – Via NVR (using local monitor)

The previous two methods of upgrading your firmware require a laptop or desktop computer to complete. If you don’t have access to a computer, you can also upgrade the camera’s firmware through the NVR’s local interface. Of course, the NVR must be connected to a monitor via VGA or HDMI so you can see what’s happening.

Using a USB mouse connected to the NVR, right-click to open the menu and select “Main Menu”. Navigate to Maintenance -> Upgrade -> IPC Upgrade for a list of all cameras added to the NVR. Click “Check for Update” at the bottom for the NVR to search Uniview’s servers for the latest firmware version for your cameras. Next, select the cameras you’d like to upgrade by checking the box on the left side. Finally, click “Upgrade by Cloud” and hit “OK” to upgrade the selected cameras firmware.

Conclusion

It’s important to regularly keep the firmware on your Uniview cameras updated to the latest version for security and performance reasons. The instructions in this guide also apply to Uniview NVRs, which also need to be upgraded for the same reasons. If you aren’t able to find the latest firmware via cloud upgrade, you can try emailing Uniview support: globalsupport@uniview.com. Occasionally they have access to newer, stable firmware which has not been released on the cloud yet. In addition, we plan on adding firmware downloads to our site in the near future.

If you have any questions about upgrading your Uniview cameras, please send an email to and we’ll answer you within 48 hours. We look forward to making your experience with security cameras a good one!

.

EZView Firmware

Please update at your own risk
We are not responsible for any device failure

DVR Firmware

.

IP Camera Firmware

Search Keywords :

Uniview camera firmware update,
How to update Uniview firmware,
Update Uniview camera software,
Uniview camera software update,
Step-by-step guide to update Uniview camera firmware,
How to manually update Uniview camera firmware,
Best practices for Uniview firmware update,
Uniview camera firmware update tutorial,
Uniview camera firmware download,
Uniview firmware upgrade process,
Firmware update tips for Uniview security cameras,
Troubleshooting Uniview firmware updates,
Uniview security system maintenance,
Updating security camera software,
Uniview firmware version compatibility,
Uniview camera settings configuration

To view a video showing the firmware upgrade process, click here.

1.1 Open Wisenet Device Manager from a computer connected to the same network as the camera.
1.2 Click on ‘Search’.

2.1 Select the device
2.2 Click on ‘FW’
2.3 Select ‘FW Upgrade’

3. Click on ‘File Open’

Note: You can also click the ‘Download’ button to have Wisenet Device Manager download the necessary firmware files.

4.1 Browse for the correct Firmware File.  Note that a downloaded firmware file is typically in a ZIP file.  You will need to first unzip the firmware file so that you can locate the .IMG file.
4.2 Click on ‘Open’

5. Click on ‘Upgrade’

6.1 Wait until the Status shows “Success” and the New version of the firmware is displayed.
6.2 Click on ‘Close’ to finish.

VMS & ONVIF Supported Device Firmware Version

1. VMS Supported Device Firmware Version

You can search a supported device list for 3rd party VMS through the below websites.

– Genetec: https://www.genetec.com/supported-device-list

– Milestone: https://www.milestonesys.com/support/tools-and-references/supported-devices/

– WAVE: https://wavevms.com/resources/compatible-devices/

And, in this kind of list, you may be noticed that some specific version of firmware are listed.

It looks that specific version of firmware only can support for the VMS, but it is not.

All Hanwha cameras are basically backward compatible, so you can think of them as Latest Firmware or Higher versions can support the VMS properly.

Please use the latest firmware, and let us know if you have any issues with the version.

How To Wisenet Firmware Update

2. ONVIF Supported Device Firmware Version

You can search ONVIF certification for our Wisenet Cameras through the below ONVIF website.

ONVIF: https://www.onvif.org/conformant-products/

The certified version on the list could be an older version when you are searching ONVIF certification.

In that case, please request a new ONVIF certification for the latest version of firmware.

How to Security Systems Firmware Upgrade: A Comprehensive Guide

Learn how to perform a security systems firmware upgrade with our step-by-step guide. Ensure your security systems are up-to-date and running smoothly.

Table of Contents

1. Introduction to Security Systems Firmware
2. Importance of Firmware Upgrades in Security Systems
3. Types of Security Systems That Require Firmware Upgrades
4. Understanding Firmware and Its Role in Security Systems
5. Preparing for a Firmware Upgrade
   • 5.1 Backing Up Your Security System
   • 5.2 Checking the Current Firmware Version
6. Steps to Perform a Security Systems Firmware Upgrade
   • 6.1 Downloading the Latest Firmware
   • 6.2 Uploading and Installing the Firmware
7. Post-Upgrade Procedures
   • 7.1 Verifying the Firmware Installation
   • 7.2 Restoring System Settings
8. Troubleshooting Common Issues During Firmware Upgrade
   • 8.1 Firmware Update Failed
   • 8.2 System Incompatibility Issues
9. Best Practices for Maintaining Security System Firmware
10. The Risks of Not Updating Security System Firmware
11. How Often Should You Update Your Security Systems Firmware?
12. Automated Firmware Updates: Pros and Cons
13. Choosing the Right Time for a Firmware Upgrade
14. FAQs on Security Systems Firmware Upgrade
15. Conclusion

1. Introduction to Security Systems Firmware

Firmware is the backbone of any security system, acting as the bridge between the hardware and software components. It controls the system’s fundamental operations and ensures that all parts function harmoniously. Understanding what firmware is and its significance is crucial before diving into the upgrade process.

2. Importance of Firmware Upgrades in Security Systems

Upgrading your security system’s firmware is not just about keeping up with technology; it’s about ensuring your system’s integrity, performance, and security. Firmware updates often come with patches for vulnerabilities, new features, and improved compatibility, making them essential for maintaining robust security.

3. Types of Security Systems That Require Firmware Upgrades

Various security systems, including surveillance cameras, alarm systems, access control systems, and home automation devices, require regular firmware updates. Each of these systems relies on firmware to operate efficiently and securely.

4. Understanding Firmware and Its Role in Security Systems

Firmware is embedded software programmed directly into the hardware of a security system. It dictates how the system behaves, processes data, and communicates with other devices. Without regular updates, firmware can become outdated, leaving your security system vulnerable to new threats and inefficiencies.

5. Preparing for a Firmware Upgrade

Before starting the upgrade process, preparation is key. This involves several steps that ensure the system is ready for the new firmware.

5.1 Backing Up Your Security System

Always back up your system settings and data before initiating an upgrade. This precautionary step ensures that you can restore your system to its previous state if something goes wrong during the update.

5.2 Checking the Current Firmware Version

Knowing the current firmware version helps you determine whether an upgrade is necessary. Most systems allow you to check the firmware version through the system’s interface or accompanying software.

6. Steps to Perform a Security Systems Firmware Upgrade

Upgrading the firmware of your security system can seem daunting, but following these steps can simplify the process.

6.1 Downloading the Latest Firmware

First, visit the manufacturer’s website or use the system’s software to download the latest firmware version. Ensure the firmware is compatible with your specific model.

6.2 Uploading and Installing the Firmware

Once downloaded, upload the firmware to your security system via a USB drive, SD card, or through a network connection. Follow the on-screen instructions to install the update, and avoid interrupting the process to prevent errors.

7. Post-Upgrade Procedures

After successfully installing the firmware, some post-upgrade steps ensure everything is running smoothly.

7.1 Verifying the Firmware Installation

Check the system’s firmware version again to confirm that the update was successful. If the new version is displayed, your upgrade is complete.

7.2 Restoring System Settings

If the upgrade reset any settings, restore them from your backup. This step ensures your system functions as expected with the new firmware.

8. Troubleshooting Common Issues During Firmware Upgrade

Sometimes, things don’t go as planned. Here’s how to troubleshoot common problems during a firmware upgrade.

8.1 Firmware Update Failed

If the update fails, restart the system and try again. Ensure that the firmware file is not corrupted and is compatible with your system.

8.2 System Incompatibility Issues

Incompatibility issues can arise if the wrong firmware version is installed. Double-check the firmware version and the model of your security system to avoid this issue.

9. Best Practices for Maintaining Security System Firmware

To keep your security system running optimally, follow these best practices for maintaining firmware.

• Regularly Check for Updates: Set a reminder to check for firmware updates every few months.
• Enable Notifications: Some systems allow you to enable notifications for new firmware releases.
• Test System After Update: Always test your security system after a firmware update to ensure all components are functioning correctly.

10. The Risks of Not Updating Security System Firmware

Failing to update your security system’s firmware can lead to several risks, including:

• Security Vulnerabilities: Hackers often exploit outdated firmware to gain unauthorized access.
• Reduced System Performance: Over time, outdated firmware can slow down your security system.
• Loss of New Features: Manufacturers often add new features to firmware updates, which you’ll miss out on if you don’t upgrade.

11. How Often Should You Update Your Security Systems Firmware?

There’s no one-size-fits-all answer, but as a rule of thumb, check for updates at least twice a year or whenever the manufacturer releases a new version. This ensures your system remains secure and up-to-date.

12. Automated Firmware Updates: Pros and Cons

Many modern security systems offer automated firmware updates, but this feature comes with both advantages and disadvantages.

Pros:

• Convenience: Updates are installed automatically without manual intervention.
• Timeliness: Your system stays updated without delay.

Cons:

• Lack of Control: You may not have the opportunity to back up settings before the update.
• Potential Downtime: Automated updates can occur at inconvenient times, potentially disrupting your system’s operation.

13. Choosing the Right Time for a Firmware Upgrade

Timing is crucial when performing a firmware upgrade. Choose a time when your security system’s downtime will have the least impact, such as during off-hours or when the premises are unoccupied.

14. FAQs on Security Systems Firmware Upgrade

1. What is firmware in a security system?

Firmware is a type of software embedded into the hardware of a security system, controlling its basic operations and functions.

2. How do I know if my security system needs a firmware update?

You can usually check for firmware updates via the system’s interface or the manufacturer’s website. If your system is experiencing performance issues, it might be time for an update.

3. Can I revert to the previous firmware version if something goes wrong?

Some systems allow you to revert to the previous firmware version, but this is not always possible. Always back up your system before upgrading.

4. Will a firmware upgrade affect my system’s settings?

In some cases, a firmware upgrade may reset your system’s settings. It’s important to back up your settings before performing an upgrade.

5. How long does a firmware upgrade take?

The duration of a firmware upgrade varies depending on the system, but it usually takes anywhere from a few minutes to an hour.

6. Are firmware upgrades free?

Most manufacturers provide firmware updates for free as part of their ongoing support for the product.

15. Conclusion

Upgrading the firmware of your security system is an essential task that ensures your system remains secure, efficient, and equipped with the latest features. By following the steps outlined in this guide, you can confidently perform a firmware upgrade and maintain the integrity of your security systems.

Latest Chinese New DVR NVR Firmware

.

Step 1: Prepare for the Update

1. Check the Current Firmware Version:

2. Visit the Manufacturer’s Website:

.

Step 2: Backup Your Settings

1. Backup Configuration:

.

Step 3: Update the Firmware

1. Prepare a USB Drive:

2. Insert the USB Drive into the XVR:

3. Access the Firmware Update Menu:

4. Start the Firmware Update:

.

How to Update XVR Firmware A Comprehensive Guide

Step 4: Verify the Update

1. Check the Firmware Version:

2. Restore Configuration:

.

Troubleshooting Tips

1. Ensure Compatibility:

2. Stable Power Supply:

3. Follow Manufacturer Instructions:

4. Common Issues:

.

Conclusion

Regular firmware updates are vital for the smooth operation of your XVR, enhancing security features, and maintaining compatibility with new technologies. By following the steps outlined in this guide, you can confidently update your XVR firmware, ensuring your device remains up-to-date and fully functional. Always refer to your device’s manual for model-specific instructions and consult manufacturer support if you encounter any issues.

or alternative guide

Updating the firmware of your XVR (eXtended Video Recorder) is crucial for maintaining its performance, enhancing security features, and ensuring compatibility with new devices. Here is a step-by-step guide to help you update the firmware on your XVR device:

Step 1: Prepare for the Update

Step 2: Backup Your Settings

Step 3: Update the Firmware

Step 4: Verify the Update

Troubleshooting Tips

Conclusion

Regularly updating your XVR firmware ensures the device runs smoothly, maintains security, and supports new features or devices. Following the steps outlined in this guide will help you successfully update your XVR firmware with minimal hassle. Always refer to your device’s manual for specific instructions related to your model.

.

How to Download and Prepare Firmware

Description

This guide will show how to download and prepare the firmware file for a Dahua device.

Firmware files for Dahua devices can be found at Firmware by Device or the specific product page for the device

Firmware is typical provided in a ZIP file, a compressed file format

This file will contain the actual firmware file, which needs to be extracted from the ZIP file in preparation for the upgrade

Prerequisites

• Computer with internet access (to download firmware file)

• Dahua device

Video Instructions

Step by Step Instructions

Confirm the Model and current firmware of Dahua device

1. Enter the IP of the device into a browser

At the Web Login

Enter the Username and Password

Click Login

2. Click Info

3. Click Version

The Device Type will be displayed

The current System Version will be displayed

Download the firmware file for device from DahuaWiki

4. In a browser go to DahuaWiki.com

Under Specifications, Firmware, & Manuals

Click the device type (in this example Recorder)

5. Enter the device model into the field

6. The results will be filtered

7. Click the firmware icon to download the firmware file

8. The file will download

Extract the firmware file to local computer

9. Right click the Start Menu / Windows icon in the bottom left of the screen

Select File Explorer

10. Select Desktop

11. Click Home

Then click New folder to create a new folder to extract the contents of the firmware zip file

12. Find the created folder in the list, double click to open

13. Under the Downloads window of the browser, click ‘Show in folder’

A new File Explorer window should open containing the directory the firmware zip was downloaded to

Locate the file in the list

14. Right click

Select Cut

15. Select the window with the new directory

Right click in the window

Select Paste

The folder will appear in the directory

16. Right click the file

17. The contents of the zip file will appear in a new window

18. Click to select all files in the folder

Drag and drop the files to the created folder

The files will appear in the directory

The firmware file will appear in the directory ready to use

How to Reset Device to Factory Default

Latest Dahua firmwares 2024

Step by Step Instructions

1. From Live View

Right click select Main Menu

2. Under Setting

Click System

3. Click Default

4. Click Factory Reset

5. A prompt will appear to confirm the factory default

Click Yes

6. The unit will default and reboot

7. When the device has booted back up it will be factory reset and is now ready for device initialization

SystemUI New

Step by Step Instructions

1. From Live View

Right click, select Main Menu

2. Click Operation

3. Click System Maintain

4. Click Default

5. Click Factory Default

6. A prompt will appear to confirm the factory default

Click OK

7. The NVR will default and reboot itself

8. The unit will boot back up

9. The device has been factory reset and is now ready for device initialization

WebUI Old

Step by Step Instructions

1. Enter the IP of the device into a browser

At the Web Login

Enter the Username and Password

Click Login

2. Click Setup

3. Click System

4. Click Default

5. Click Factory Reset

6. A prompt will appear to confirm the Factory Reset

The unit will reboot and is now ready for device initialization

WebUI New

Step by Step Instructions

1. Enter the IP of the device into a browser

At the Web Login

Enter the Username and Password

Click Login

2. Click Setup

3. Click System

4. Click Default

5. Click Factory Reset

6. A prompt will appear to confirm the factory default

Click Yes

The unit will reboot and is now ready for device initialization

Firmware Update via USB Drive

Description

This page will show you how to update the firmware of your Dahua device via a USB drive at the recorder

Note: All devices should be “Factory Reset” once the firmware update is complete.

Prerequisites

• Dahua device

• USB drive with the firmware file for the device – Firmware by Device

SystemUI Old

Prerequisites

• USB Drive 1GB or more

• The proper firmware file for the device

• Physical access to the recording device

• A computer to load the firmware files onto the USB

Video Instructions

Step by Step Instructions

1. Download Firmware and copy to USB such as a flash drive ➞ Insert USB into recorders USB port.

2. It will prompt for option to upgrade, Click System upgrade ➞ Click Start.

3. Browse for firmware ➞ Open firmware folder is in ➞ Select Bin File ➞ Click Start. Device will reboot once finished.

SystemUI New

Prerequisites

• USB Drive 1GB or more

• The proper firmware file for the device

• Physical access to the recording device

• A computer to load the firmware files onto the USB

Video Instructions

Step by Step Instructions

USB drive with Firmware file should be plugged into USB slot on recorder

1. From the Main Menu, click Operation

2. Click System Maintain > Upgrade

3. Click the System Upgrade in the middle of the page.

4. Select the Firmware file from the list

Click OK

5. The firmware update will begin.

Make sure to not unplug the power during this process.

6. The NVR will reboot as the final step of the process

Firmware Update via WebUI

Description

This page will show you how to update the firmware of your Dahua device via the WebUI

Note: All devices should be “Factory Reset” once the firmware update is complete.

Prerequisites

• Dahua device with network connection

• Local Windows computer

• Firmware file for device downloaded to computer – Firmware by Device

Instructions

WebUI Old

Prerequisites

• Computer

• Internet

• Compatible Browser (Internet Explorer)

• NVR/HCVR/IPC

Video Instructions

Step by Step Instructions

Step 1: From IE(Internet Explorer) type in the devices IP address on the IE address bar → login with credentials.

Step2: Setup → System → Upgrade

Step 3: Click on “Browse” → Select correct firmware

• Click on “Upgrade”

• Device will reboot after upgrade is finished.

USB firmware Upgrade via web.

If firmware is on USB Device → Click on browse → Navigate to USB location → Select firmware → Open → Upgrade.

WebUI New

Prerequisites

• Dahua device with network connection

• Local windows computer

• Firmware file for device downloaded to computer

Video Instructions

Step by Step Instructions

1. Enter the IP of the device into a browser

At the Web Login

Enter the Username and Password

Click Login

2. Click Operation

3. Click System Maintain

4. Click Upgrade

5. Click Browser

6. Locate the firmware file

Click Open

7. Click Upgrade to begin the update process

8. A message will appear to confirm the upgrade process

9. When the upgrade is complete the device will reboot

Firmware Update via SmartPSS

Description

This page will show you how to update the firmware of your Dahua device via SmartPSS

Note: All devices should be “Factory Reset” once the firmware update is complete.

Prerequisites

• SmartPSS installed

• Device added to SmartPSS

• Firmware file downloaded to computer – Firmware by Device

Instructions

SmartPSS 2.002

Prerequisites

• SmartPSS installed

• Dahua device added to SmartPSS

• Firmware file for device downloaded to computer – Firmware by Device

Video Instructions

Step by Step Instructions

1. From the Main Page of SmartPSS

Click Device CFG

2. Click to select the device from the device tree on the left side of the screen

3. Click Upgrade

4. Click the folder icon

5. Locate the firmware file

Click Open

6. Click Firmware Upgrade to begin the firmware update process

7. A prompt will appear to confirm the upgrade process

8. A prompt will appear to confirm a successful upgrade

Firmware Upgrade via ConfigTool

Description

This page will show you how to upgrade the firmware of your Dahua device via ConfigTool

Note: All devices should be “Factory Reset” once the firmware update is complete.

Prerequisites

• Dahua device(s) with network connection(s)

• ConfigTool installed on a local computer

• Firmware file for device(s) downloaded to computer – Firmware by Device

Step by Step Instructions

Single Device Upgrade

1. Open ConfigTool and click on Search Setting at the top

2. Check the boxes for both Current Segment Search and Other Segment Search.
Enter the IP range for the device you are looking for in Start IP and End IP.
Enter the login information for that device in Username and Password.
Then click OK at the bottom

3. Click on Device Upgrade on the left.
Find the device you want to upgrade in the list and click on the Folder icon next to it under the Upgrade File Path column

4. Use the file explorer to find the firmware file on your computer and select it.
Then click on Open

5. Verify the file path is listed next to the device in the list.
Then click on the Upgrade icon to the right of the device in the Operate column

6. Click on OK

7. The progress bar will fill up as the device is upgraded

8. Once the device has been successfully upgraded you will see a Green Check Mark next to it in the list

Batch Device Upgrade

1. Open ConfigTool and click on Search Setting at the top

2. Check the boxes for both Current Segment Search and Other Segment Search.
Enter the IP range for the devices you are looking for in Start IP and End IP.
Enter the login information for those devices in Username and Password.
Then click OK at the bottom

3. Click on Device Upgrade on the left.
Find the devices you want to upgrade in the list and check the boxes next to them. (Make sure all devices you check require the same firmware.)
Then click on Batch Upgrade at the top

4. Click on OK

5. Click on Browse

6. Use the file explorer to find the firmware file on your computer and select it.
Then click on Open

7. Click OK at the bottom

8. The progress bars will fill up as the devices are upgraded

9. Once the devices have been successfully upgraded you will see Green Check Marks next to them in the list

Recorder Firmware Update via Online

Description

This page will show you how to update your Dahua Recorder online.

Note: All devices should be “Factory Reset” once the firmware update is complete.

When the NVR detects there is a newer firmware in the server, a ‘1′ icon will appear at the System icon.

The entire process takes about 5 minutes depending on network connection.

Prerequisites

• Dahua device that supports online update

• Internet connection to Dahua device

Instructions

SystemUI

Prerequisites

• Dahua device with internet connection

Video Instructions

Step by Step Instructions

1. From Live View

Right click, select Main Menu

2. Click Operation

3. Click System Maintain

4. The upgrade menu will show if a new firmware version is available

5. Click Upgrade Now to begin the update process

6. A prompt will appear to confirm that Surveillance will be paused during the upgrade process

Click OK

7. The firmware file will begin to download

8. After the download is complete the unit will automatically begin the firmware upgrade

9. The unit will reboot as the final step of the upgrade

10. Once the firmware update is complete the unit will reboot. A factory default is recommended after a firmware update

From Live View, right click Select Main Menu

11. Click Operation

12. Click System Maintain

13. Click Default

14. Click Factory Default

15. A prompt will appear to confirm the factory default

Click OK

16. The unit will reboot

17. When the unit boots back up it will be factory defaulted and ready for the Device Initialization process

WebUI

Prerequisites

• Dahua device with internet connection

• Local Windows computer

Video Instructions

Step by Step Instructions

1. Enter the IP of the device into a browser

At the Web Login

Enter the Username and Password

Click Login

2. Click Operation

3. Click System Maintain

4. Click Upgrade

5. The upgrade menu will show if a new firmware version is available

6. Click Upgrade Now

7. A prompt will appear to confirm that Surveillance will be paused during the upgrade process

Click OK

8. The firmware file will begin to download

9. After the download is complete the unit will automatically begin the firmware upgrade

10. Once the firmware update is complete the unit will reboot. A factory default is recommended after a firmware update

Enter the IP of the device into a browser

At the Web Login

Enter the Username and Password

Click Login

12. Click Operation

13. Click System Maintain

14. Click Default

Click Factory Default

15. A prompt will appear to confirm the factory default

Click OK

The unit will factory default and reboot

When the unit boots back up it will be factory defaulted and ready for the Device Initialization process

Index of /Firmware

.

.

Today, Anviz aims to deliver simple and integrated solutions including cloud and AIOT-based smart access control & time attendance and video surveillance solution, for a smarter and safer world.

Part 1. Firmware Update Via Web Server
 

1) Normal Update

>> Step 1: Connect Anviz device to PC via TCP/ IP or Wi-Fi. (How to connect to CrossChex)

>> Step 2: Run a browser (Google Chrome is recommended). In this example, the device is set in the server mode and IP address as 192.168.0.218. 

>> Step 3. Enter 192.168.0.218 (Your device might be different, check the device IP and enter IP address) in the browser address bar to run as the webserver mode. 

>> Step 4. Then enter your user account, and password. (default User: admin, Password: 12345)

>> Step 5. Choose ‘Advance Setting’

>> Step 6: Click ‘Firmware Upgrade’, choose a firmware file that you want to update and then click ‘Upgrade’. Wait for the updating complete.

>> Step 7. Update Complete. 

>> Step 8. Check the firmware version. (You can check current version either on webserver info page or on the device info page)

How to Update Anviz Device

Read More : UNV Recorder Set Up Guide
.

2) Forced Update

>> Step 1. Follow the steps above till steps 4, and enter 192.168.0.218/up.html or 192.168.0.218/index.html#/up in the browser.

>> Step 2. Forced Firmware Upgrade mode is set successfully.

>> Step 3. Operate Step 5 – Step 6 to finish the forced firmware updates.

.

Part 2: How To Update Firmware Via CrossChex

>> Step 1: Connect the Anviz device to the CrossChex.

>> Step 2: Run the CrossChex and click the ‘Device’ menu on the top. You will be able to see a small blue icon if the device has connected to the CrossChex successfully.

>> Step 3. Right-click the blue icon, and then click the ‘Update Firmware’.

>> Step 4. Choose the firmware that you want to update.

>> Step 5. Firmware update process.

>> Step 6. Firmware Update Complete.

>> Step 7. Click the ‘Device’ -> Right-Click the blue icon -> ‘Device Information’ to check the firmware version.

Part 3: How To Update The Anviz Device Via Flash Drive.

1) Normal update mode

Recommended Flash Drive Requirement:

     1. Empty Flash Drive, or place firmware files in the Flash Drive root path. 

     2. FAT file system (Right-click USB Drive and click ‘Properties’ to check the Flash Drive file system.)

     3. Memory Size under 8GB. 

>> Step 1: Plug a flash drive (with an update firmware file) into the Anviz Device.

You will see a small Flash Drive icon on the device screen.

>> Step 2. Login with Admin mode to the device -> and then ‘Setting’

>> Step 3. Click ‘Update’ -> then ‘OK’.

>> Step 4. It will ask you to restart, press ‘Yes(OK)’ to restart once to complete the update.

>> Done  

2) Force update mode

(****** Sometimes devices are not allowed to be updated, this is because of device protection policy. You can use force update mode when this situation occurs.   *****)

>> Step 1. Follow the Flash Drive Update from step 1 – 2.

>> Step 2. Click ‘Update’ to get into the page like showing in the below. 

>> Step 3. Press ‘IN12345OUT’ in the keypad, then the device will change to forced upgrade mode.

>> Step 4. Click ‘OK’, and the device will restart once to complete the update.

>> Step 5. Update Complete.

Summary for Anviz Product’s Firmware

For convenience we made this topic listing all firmware of Anviz access control & time attendance device. You can upgrade your device as necessary.

If you don’t know how to upgrade the firmware, please refer to the upgrade guidances below:

Click to Check Upgrade Guidance Suits ST Platform Device 1.0 bin

ST Platform devices:
T5, T5 Pro, T5 S
M5, M5 Pro
P7, M7
VF30, VP30, VF20
D200
EP300
A300

Get Firmware for ST device：

Click to Check Upgrade Guidance Suits Linux Platform Device 593

Linux Platform devices:
A350, A350C, A380
C2 Pro, C2 KA, C2 Slim
EP30, EP300 Pro
FaceDeep5 Series
FacePass7 Pro
M5 Plus, M3 Pro
M-Bio
VF30 Pro
W1 Pro, W2 Pro

Click to Submit a ticket 467
If you need to upgrade firmware for above device types, please submit a ticket with the serial number, current firmware and kernel version. We’ll send you the correct firmware and help with the upgrading.

If you have any concerns or questions, please submit a ticket 183 and our technical support team will help .

.

With 200 professional engineers of hardware and Software, Special R&D team focus on software and hardware design, to make sure the quality for JUAN  brand. With 15,000 square meters plant area, JUAN  owns 20 sets high-speed SMT,  4 DIP workshop, 20 assembling lines; Daily productivity ups to 5000pcs DVR/NVR and 5000pcs cameras.

JUAN  have built it’s own nationwide sales net, successfully expended European, American, middle East and so on. Quality is the absolute truth criterion for Juan, 100% inspection before delivery; Moreover, JUAN  has an efficient pre-sales and after-sales service team!JUAN , your most trustful cooperation partner!

JUAN CCTV Firmware Software NEW

Read Next :

• How To Set Up Tripwire
• Eseecloud 4G Solar Camera Guide
• ClareVision Cameras Setup Guide

Download the Alibi Firmware Upgrade Instructions for detailed information.

All available software and firmware downloads can be found on the Alibi Downloads Page.

Alibi Recorder Firmware

Read Next  :

• Vivotek firmware DVR NVR IPC Software download
• GW Security XVR NVR Firmware Software Download
• KBVISION XVR Firmware

Alibi Vigilant Network Video Recorder Firmware

Looking for firmware? Find the latest firmware downloads, release notes and firmware instructions for current and discontinued Alibi Vigilant Recorders in the following table.

NVR-B3111 Firmware for the following Alibi Vigilant recorder models.

ALI-NR320P-8
ALI-NR640P-16

NVR-B3601 Firmware for the following Alibi Vigilant recorder models.

ALI-NR040F-1
ALI-NR080F-1
ALI-NR160F-2
ALI-NR160P-4
ALI-NR320P-4

NVR-B3613 Firmware for the following Alibi Vigilant recorder models.

ALI-NR041F-1

NVR-B3112 Firmware for the following Alibi Vigilant recorder models.

ALI-NR081F-2
ALI-NR161F-2
ALI-NR161P-4
ALI-NR321P-4

NVR-B5301 Firmware for the following Alibi Vigilant recorder models.

ALI-NR321P-8
ALI-NR640P-8

NVR-B5101 Firmware for the following Alibi Vigilant recorder models.

ALI-NR1280X-16

B3506 Firmware for the following Alibi Vigilant recorder models.

ALI-HR161F-2

B3502 Firmware for the following Alibi Vigilant recorder models.

ALI-HR160F-1

B3503 Firmware for the following Alibi Vigilant recorder models.

ALI-HR040F-1

B3519 Firmware for the following Alibi Vigilant recorder models.

ALI-HR042F-1

B3503 Firmware for the following Alibi Vigilant recorder models.

ALI-HR080F-1

B3516 Firmware for the following Alibi Vigilant recorder model.

ALI-HR081F-1

B3520 Firmware for the following Alibi Vigilant recorder models.

ALI-HR082F-1

B3511 Firmware for the following Alibi Vigilant recorder models.

ALI-HR162F-1

B3507 Firmware for the following Alibi Vigilant recorder models.

ALI-HR162F-2

B3518 Firmware for the following Alibi Vigilant recorder models.

ALI-HR163F-1