Swann Camera Troubleshooting

Let’s discuss Swann camera troubleshooting. Like any other brand of Wi-Fi or IP camera for consumer-grade surveillance, you will come across common errors that you can solve easily in a DIY fashion. Refer to this guide for more details.

The Swann brand claims itself to be security made smarter. It backs up its claim by making some of the world’s best value security system. They’re able to compete against the likes of Ring, Nest, Arlo, Bink, and Wyze by providing the smartest of features and the most intuitive of controls.

Regardless, in case your Swann camera stops working, isn’t recording, isn’t connecting to Wi-Fi, or has issues with playback, “ Swann camera Troubleshooting – Problems and Solutions with Swann security cameras” got your back.

Swann camera not working: How to Fix

If your Swann camera isn’t turning on, check the wiring or battery. If it’s offline or has hampered function, disconnect the cameras, disconnect the power supply, and then restart to see if that fixes the problem. Your camera can also stop working if it’s overheated. Cool it down and try again later.

If worse comes to worst, your Swann camera might be “bricked” or rendered completely broken and non-functioning. If it’s still in warranty, you can get it replaced for free or at least get a discount for a replacement.

See More :

• Swann device Password Reset for all model
• How to Install SwannView Link
• SWANN LATEST FIRMWARE UPDATES

Swann camera not recording: How to Fix

If your Swann cam is not recording, it might be because recording is disabled. Go to “Main Menu” the select record. Fix “Record Setup” and “Motion Setup”. You can also set up the “Record Schedule” too.

Check “Motion Setup” to see if that’s the reason why your camera isn’t recording (it only records when it detects motion).

You can also connect one camera only to your DVR or NVR to see if that fixes the recording issues. You can setup an isolation test, cross-check the camera and cable, and interpret the results to narrow down the issue.

Swann camera not connecting: How to Fix

Check your router and make sure the Wi-Fi password entered is correct. Sometimes, your Swann camera might unsuccessfully establish connection with your router simply because you misread a character or capitalized the wrong letter (it’s case-sensitive).

The cam could also be out of coverage area of the router. Make sure the router and the camera(s) are close to one another to ensure a smooth connection.

If the camera is still have issues with Wi-Fi connection, reset or power-cycle your router and try again. It might be an ISP problem. If you believe the camera is in error, you can reset it back to factory settings using the recommendation outlined below.

Swann playback not working: How to Fix

To playback a video, tap the “Playback” icon, then the “Camera” icon, and then set a start and end date and time. You can also search recordings on the recorder below the calendar then tap “Start Playback”.

Sometimes, when you attempt to playback videos, you get blue lines to show it was recorded but get an “open failed” error message when you attempt to play it. This could be caused by bad configurations, lack of storage space, corrupted video files, and failing DVR components.

This could also root from the latest software update. It mostly affects iPhone users but even Android users are affected. Contact a Swann technician or consider replacement if the problem consists.

Swann camera black screen: How to Fix

Some Swann cam users experience CCTV cam black screen or a blank video at night. This might mean the camera lacks infrared night vision, especially if it continues to record and works fine during the daytime or if you put a lamp or light source where it’s supposed to record things.

Maybe you simply forgot to turn the IR on. Fix this by checking camera settings and enabling the infrared light. If that’s not the case, then the infrared night vision camera might lack an IR cut filter.

It could also have a faulty IR sensor. Either way, you might need to have the device fixed by a technician or replaced altogether depending on the severity of the damage or the state of its warranty.

Off-warranty products might require some repair and finagling from third-party repairmen but this means it’s now outside the jurisdiction of Swann.

How to reset Swann camera?

To reset Swann Camera models NHD-805/806/810/811/815/815AF/816/817/818/819, here’s how to go about it. Locate the reset button. You might need to use a reset key or a pin in order to press it for 10 seconds to start the reset process.

Disconnect the camera from the NVR first before resetting it. You’ll also need to remove it from the PoE switch or power adapter to turn it off completely. Some devices require a pin or cable key to access the small reset button.

FAQs – Frequently Asked Questions

Here are the most frequently asked questions in regards to the Swann cam.

Where is reset button on Swann camera?

On most Swann cams, the reset button is found on the bottom of the device. However, this might vary depending on the model. This button typically requires a needle or pin to push until you hear a click sound. You need to hold the button for 10 seconds to reset the device.

How to find Swann IP camera default password?

The default all-access admin password for Swann is “12345” on the username “admin”. To reset the password for cameras, NVRs, or DVRs, you might need to get the MAC address by downloading some sort of app.

Alternatively, you can reset the camera to default settings by pushing the pin-sized reset button for 10 seconds in order to get the default password back.

Swann DVR default password: How do I find my Swann DVR password?

If “12345” is not the password being used by NVR’s “admin” account and you’ve forgotten what the password is, reset it by downloading and installing the HomeSafe Config Tool first. Open the app, click on your device’s IP address, and note the MAC address.

Now, you can go to the login screen of the DVR, click on “Forgot Password”, and enter the MAC address provided to you by HomeSafe. Click “OK” when you’re done then set a new password.

Why have my Swann cameras stopped working?

You should check first that your camera power supply (or supplies) are properly connected to a wall socket or power strip. If you do have the power supply connected to a power strip, try a wall socket just in case the power strip is faulty or is a specialised unit that doesn’t have all the sockets active at all times.

How do I reset my Swann camera?

Disconnect the camera from the NVR (or from a PoE switch or a power adapter) to turn it off completely. Press and hold the reset button. While holding down the reset button, plug the camera back to the NVR (or to the PoE switch or a power adapter) and continue holding down the reset for 30 seconds, then release.

Why is my security camera black screen?

Some users experience CCTV camera black screen or video going black at night, it’s likely that the camera lacks infrared night vision, or the IR night vision camera doesn’t have an IR cut filter or a faulty IR sensor, or you simply forget to turn the IR on. Quick Fixes: Check camera settings to make sure the IR is on.

How do I get my Swann cameras back online?

All you need to do to get back online is to re-register the camera. Follow the steps below:First, go into the home interface (this is the screen it goes to when you start the app) and tap the “Camera” button on the bottom. On the next screen, tap the camera where it says “Camera is Offline”.

How long do Swann security cameras last?

Unfortunately, details aren’t provided for how long the Lithium Ion battery will last on a single charge, but it’s likely to be around 8-10 weeks based on our use. Obviously, if it’s not practical to take the device down every couple of months, then it may be worth investing in the solar panel accessory as well.

Why is the blue light flashing on my Swann DVR?

The first time you power up your camera, the camera LED will be blinking blue to indicate pairing mode.

Why does my security camera keep going offline?

Security cameras go offline for three main reasons: power outages, loss of internet, or failure of the camera’s components (broken parts or wires). Knowing some quick troubleshooting tips will help you get your camera back up and running in no-time.

What happens if you unplug a security camera?

When your house, the cameras won’t record. When you are away from the home, the cameras record. They’ll still be “working” but not recording.

What to do if all cameras display no image on the DVR monitor?

Is this an existing camera that was working and at some point had video loss? Follow these troubleshooting steps.

1. Test Your Power Supply.
2. Check Power Supply Box Fuses.
3. Test Camera on a Different DVR Port.
4. Use a Test Monitor.
5. Use a Test Cable and Spare Power Supply.

Why is my Swann security camera not connecting?

Make sure that the connection is successful by checking your router and ensuring that your Wi-Fi password is correct. If the camera is still having issues connecting to Wi-Fi, reset the router and try again once it’s back up.

Why does my EUFY camera keep going offline?

Your Eufy camera goes offline if the battery has run out of charge, has lost connection to the HomeBase and Wi-Fi, or you need to update your Eufy app. You should check your battery and check the Wi-Fi settings to ensure that they are working correctly or reboot your camera to solve the problem.

Is Swann a Chinese company?

Swann has always been a leader. From humble beginnings in Melbourne, Australia the business now has offices in the USA, Canada, Australia, UK, Hong Kong and China and a presence in over 40 countries on 6 continents.

Can Swann cameras be hacked?

A popular wireless security camera designed to safeguard businesses and homes was vulnerable to a spying hack. The flaw meant it was possible to hijack video and audio streamed from other people’s properties by making a minor tweak to Swann Security’s app.

Are Swann 4k cameras any good?

The quality of the cameras are excellent. They feel, look and operate great. Simple setup and easy to use.

What does the blue light on my DVR mean?

The blue light indicates that the DVR (or other receiver) is outputting an HD signal. It could be the HDMI negotiation with your new TV causes it to stay on when the TV is off. If it’s too bright for you, a small piece of opaque tape is recommended.

What does it mean when Blink camera flashes red?

The Blink Video Doorbell flashes a red LED on the ring surrounding the doorbell button when it is seeking connection. During setup, and change of system or Wi-Fi, the red LED shows if the doorbell is ready to connect. If the red LED is not flashing as expected, remove one battery for five seconds and replace it.

What does a blue light mean on a camera?

LED setup reference guide

A flashing blue light on a security camera means you are ready for the WiFi protected setup.

Why do my wireless cameras keep disconnecting?

There are two main reasons that a camera may lose WiFi connection. It may be installed too far from your WiFi router, or it may not have sufficient bandwidth on your WiFi. Please contact our customer support for help in diagnosing this issue and confirming the cause.

Why won’t my security camera connect to my Wi-Fi?

Hold your phone in the location of your camera and check the number of dashed Wi-Fi coverage on your phone. If the connection is poor, if possible, reduce the distance between the camera and your Wi-Fi router. Consider a wired installation or consult your internet provider for solutions.

Why does my IP camera lost connection?

Network Conditions

Surveillance Station may lose connection to your camera when the Internet connection is poor or if changes are made to bandwidth, firewall, or IP address settings.

How do I disable Swann camera?

How do I disable Swann camera?

1. Yea, it’s possible to turn off the INTCAM manually.
2. Try this procedure, using the button on the back of the cam –
3. Press and hold the Pair button for 30 seconds.
4. To turn it back on, just press the Pair button for a second, Don’t hold too long or it’ll go into pairing mode.

Will DVR still record if unplugged?

The Cloud will continue to record your set programs while the physical DVR is unplugged. You are also correct that if your additional TV boxes are unplugged, this will not affect your planned recordings.

How do I stop my security camera from being unplugged?

Indoor cameras

1. Run your camera’s power cable behind furniture or shelving so that it’s harder to spot and unplug.
2. Install cable clips to help keep the power cord attached to the wall. Check your local hardware store for availability.

How do you troubleshoot a security camera?

How do you troubleshoot a security camera?

1. Know your login details.
2. Check the power source (most cameras are PoE)
3. Check to see if cameras work from inside or outside the network.
4. Check the cabling.
5. Reboot the system.
6. Check for IP conflict.
7. Check ARP tables.
8. Update software & firmware.

Conclusion

Even though Swann isn’t as well-known as Ring, Arlo, or Nest, it has a significant share of the Wi-Fi cam market because it caters to a significant niche. Many people are curious how to troubleshoot this camera because they’re loyal Swann customers.

There’s great demand to know how to make sure their Swann devices work and operate smoothly. They also wish to know whether their Swann is broken or fixable in some DIY way.

How to Connect Swann Camera?

If you wish to learn how to connect your Swann cam to Wi-Fi, to your phone, to your TV, to your laptop, to your MacBook, to Alexa, to the Internet, and so forth, you’ve come to the correct guide.

People are curious about the Swann camera because it provides a dependable and affordable alternative to your Ring cams, Arlo cams, and Nest cams. It does everything those cams could do in terms of Wi-Fi-based and app-based operation but in a format much closer to CCTVs.

It’s this dependability that Swann got a loyal consumer base who’d read articles like this about “How to connect Swann camera?” and whatnot. So let’s discuss how to connect the smart cam to different devices already!

How to connect the Swann camera to Wi-Fi?

In order to connect your Swann Wi-Fi or IP cam to Wi-Fi, you need to pair it up with your Swan Security app.

• Go to the Menu: To do so, tap the menu on the upper-left corner of the screen, then select “Pair Device”. Afterwards, tap “Start”.
• Scan QR Code: Attached to your camera is a QR code sticker. Have your smartphone scan that. If you don’t have the QR code, tap “Manual Pair” and get the MAC address above the serial number of your cam.
• Enter Wi-Fi Password: Now you can enter the Wi-Fi password and tap “Next”. Enter a camera name then tap “Next”. Set the camera into “Pairing Mode” by pressing and holding the rest or pair button until the LED blinks blue. Now tap “Next”. Then tap “Start”.
• Congratulations Message: If your cam successfully connected to Wi-Fi, you’ll see an overview on the app. After that’s done, tap “Next”. You’ll get a “Congratulations!” message once setup is complete.

How to connect Swann security cameras to Phones? (iPhone, iPad, Android)

Remember the section above, where you had to download an app and scan a QR code via the app in order to pair up your camera with your phone (whether it’s an Android, iPad, or iPhone)? That’s how you connect your mobile device to your Swann cam.

Get SAFE by Swann for Android devices, SwannView Plus for iOS devices, and SwannCloud for iPad and Android tablets. Swann Security App and SwannView Link can be used for multiple devices.

Finally, download HomeSafe View for desktop PCs doing NVR/DVR remote viewing and AlwaysSafe for NVW-485, NVW-490 & SWWHD-PTCAM Cameras.

See more:

How to connect the Swann camera to the TV?

You can hook up your Swann cam to your TV using the Digital Video Recorder (DVR). It has a hard disk of your recorded footage that a modern smart TV or flatscreen TV with an HDMI connection should be able to read and review videos with.

You can also connect Swann cam to your FireTV by first connecting the Swann cam to Alexa (more on this below).

How to connect Swann camera to Laptop, Macbook?

Download the HomeSafe View for desktop PCs in order to connect your Swann Camera to your MacBook or Laptop. To view Swann cam on your Windows PC, launch the Device Configuration Tool and have it detect the camera and NVR (Network Video Recorder).

Any cameras directly connected to the NVR won’t be shown. The cam’s IP address should be visible here.  Click on it like a link to launch Internet Explorer and view it from there.

How to connect the Swann camera to Alexa?

Open the Amazon Alex app. Click the three lines icon on the upper-left corner of the screen. Select “Skills and Games” tab. Search for the “Swann Skill”. Select the skill then login to your Swann account.  Press “Done” and then select “Discover Devices”.

The new Alexa Skill should then detect your Swann cams and have them listed on the “Devices” tab. Amazon Alexa works with Swann cameras to stream live camera video to your Echo Spot, Echo Show, or 4K Fire TV.

See more here:

How to connect Swann DVR to the Internet?

In order to connect your Swann DVR to the Internet, you need to first connect the DVR with your phone or tablet care of SwannLink. From there, it should have the ability to link to the Internet by proxy.

SwannLink connects systems care of peer-to-peer technology. Just scan your ID number or QR code to SwannLink in order for it to directly connect your smart devices to your DVR via the cloud, with the Swann DVR verifying the ID of your smart device as well as the username and password of the Wi-Fi.

FAQs – Frequently Asked Questions

Here is the most frequently asked questions section of this guide.

Why is my Swann camera not connecting?

Your ISP or router might have a bad Internet connection. Reset or power-cycle the router to get it back online. If the issue persists, contact your ISP for more details. Or maybe your cam is out of the router’s coverage area. Make sure they’re both near one another for best results.

Finally, check the Wi-Fi password. Make sure this case-sensitive password has been entered correctly when prompted by your app.

How do I get my Swann cameras back online?

Enter the Wi-Fi password again and make sure it’s correctly entered since it’s case-sensitive. Put your cam nearer the router. Reset the router and make sure your ISP is providing you with a solid Internet connection.

If the camera itself is failing to connect to a perfectly fine Wi-Fi, you might need to troubleshoot the cam, its connection to the app, its connection to the NVR or DVR, and so forth. You might need to reset it to factory settings altogether.

How do you reset a Swann security camera?

To reset Swann Camera models NHD-805/806/810/811/815/815AF/816/817/818/819, locate the small reset button (usually found on the underside of the device) and press it with a reset key, needle, or pin for about 10 seconds. Before doing a reset, disconnect the camera from the NVR and PoE switch.

See more: https://support.swann.com/s/article/tAM37IZ5qr

What app do I use for Swann security cameras?

The Swann Security App manages all of your Swann cameras in one central hub. The HomeSafe View app for the PC or Mac is the desktop program for remote viewing of NVRs and DVRs.

AlwaysSafe is the app for NVW-485, NVW-490 & SWWHD-PTCAM Cameras. You can also download SAFE by Swann for Android devices, SwannView Plus for iOS devices, SwannView Link for multiple devices, and SwannCloud for iPad and Android tablets.

How to access Swann DVR from the computer?

To view Swann on PC, You can see this post: https://securitycamcenter.com/view-swann-cameras-homesafe-view-software/

Conclusion

Hopefully, this guide has shown you everything you need to know about Swann cameras when it comes to setting them up, connecting them to different devices, and troubleshooting any errors you might encounter when operating them.

How to Reset Swann Camera?

You’ve reset one camera you’ve reset them all, right? Well, kind of. In the case of the Swann Camera or any other Wi-Fi security camera out there, it’s some variation of finding the reset button, waiting for the light to change, and then you’re done.

The Swann brand claims to produce some of the world’s best value security solutions that also offer the most intuitive controls and the smartest of features. They intend to empower you, the consumer when it comes to their quality products like their Wi-Fi or smart device cameras.

Although they’re not as well-known as Ring, Arlo, or Blink, they have their own market share and niche to cater to. This is why so many people are curious about how to reset the Swann camera. It’s not exactly the same as resetting cameras from Ring and Arlo.

How to Reset Swann Camera

In regards to how to reset Swann Camera models NHD-805/806/810/811/815/815AF/816/817/818/819, here’s the nitty-gritty. There’s an extra cable for the models above that isn’t a connector but a reset button. It looks like a reset key to use on a keyhole or pinhole to prevent accidental resets.

When resetting the Swann Cam to factory settings, you need to disconnect it from the NVR first. Or from its power adapter or PoE switch. This will turn it off completely. Now locate the reset button press and hold it. Some devices might require a cable key or pin to access the button.

Reconnect While Resetting Then Disconnect Afterwards

While holding the button down, plug the camera back to the NVR, PoE switch, or power adapter. Continue holding it down for about 30 seconds before releasing. At this point, disconnect the camera again to turn it off completely.

This should reset your cam to factory settings. Unlike other Wi-Fi camera models, Swann Cams make it more complicated to do a reset to avoid accidental resets, like you accidentally pressing the button or inserting a pin into the reset pinhole when you have no intention to reset to factory settings.

Why Do You Need to Reset the Swann Camera?

Sometimes, the Swann Cam—like any other sophisticated piece of electronics, such as your laptop, smartphone, and tablet—can encounter a glitch or an error that keeps it from properly connecting to your Wi-Fi, using its motion alerts, or uploading its footage to the cloud (if you paid for the service).

You can do a host of things to troubleshoot such errors, including power cycling the device like a wayward router or fixing your router itself to re-establish your Wi-Fi connection if the problem isn’t with the Swann hardware itself.

If push comes to shove and none of those tips work, you can do a hard reset to factory settings (the settings right off of the box or the factory line) to get it working back to normal. You’ll still need to put back your customizations afterwards though.

The History of Swann 101

Swann traces its roots back to Melbourne, Australia. It eventually grew from its humble beginnings, with it now being an international or multinational company with offices in the United Kingdom, the United States of America, Canada, Hong Kong, and Mainland China as well as Australia.

It even has a presence in over 6 continents and 40 countries. What separates Swann from other security companies riding the Wi-Fi cam thread is that it’s a pioneer in the field of Do-It-Yourself (DIY) security with its often imitated features taken from many of its products.

It has doubtlessly done its part in making households and neighborhoods safer compared to before, when the only cameras regular consumers could afford were Nanny Cams and Baby Cams.

Swann’s Membership with the Infinova Group

At present, Swann serves as an Infinova Group member, thus providing major commercial institutions and startup businesses alike with enhanced security device production through better manufacturing abilities, cutting-edge research and development, and state-of-the-art innovations.

They’re at the forefront of networking and security solutions plus they’re not limited to the video doorbell or Wi-Fi security camera market like the Amazon-backed Ring and Blink camera lines. They’ve also expanded their international network access thanks to their Infinova Group backing.

They’re specifically dependable when it comes to making the one-app ecosystem standard work superbly in their models of smart devices, as opposed to others that use multiple apps or one app per camera model.

Swann’s Focus on Crime Prevention

While other companies would rather turn their Wi-Fi camera offerings into Swiss Army Knives of functionality that assist in making the Smart Home future of the 21^st Century a reality, Swann has established its market presence with a different tactic.

They’re more about giving consumers true security, which means they have more of a focus on crime prevention. They provide their cameras with alarms and direct lines to the police for emergencies instead of turning their camera into the next smartphone with non-essential features.

This is also why most Swann cameras offers two-way talk, sirens, alarms, sensor lighting, motion sensors, night vision, and more. This deters not only midnight prowlers and burglars but also package thieves and neighborhood brats.

Swann’s Enforcer Cameras

Swann’s Enforcer Cameras take crime deterrence to another level by using True Detect detection sensors that detect heat, motion, and people. The people detection in particular keeps down power usage and false alarms involving strays and wildlife like cats, chipmunks, birds, and raccoons.

When triggered, True Detect activates the alarms and chimes with all its trimmings. You’ll get mobile alerts, spotlights, flashing lights, video recordings, and more as though you’ve tripped the museum alarms that alert the security guards (or your closest neighbors).

Many of Swann’s more sophisticated inventions include vehicle and pet detection, face recognition, and the peace of mind that your home is protected through cloud and local recordings. This is why it has camera reset included to deal with software errors from all those settings.

Things of Note

We believe that the Swann Camera allows customers to protect and stay connected to their home and/or businesses no matter the circumstances through best-value and intuitive design. This is reflected upon the ease by which you can reset their cameras.

This proves that Swann is one of the global leaders in security monitoring with consumer electronics or smart devices as well as security-centric solutions for smart homes and commercial establishments of the present and the future. What more can you ask for a renowned company with affordable wares?

Swann Security devices

This section will show articles about resetting the password reset of your Swann Security account and resetting the password of your Swann Security OS 5 recorders, such as our DVR 5680s/5580s, 4680s/4580s, 4480s/4485s, our NVR 8580/8780 series, and the NVW-800 system.

NOTE: This guide is for the following recorders : DVR-4480G, 4480RN, 4480V, 4580G, 4580RN, 4580V, 4680, 4680RN, 4680A, 4685, 4685RN, 4780V, 4980, 5580, 5580A, 5580G, 5580G2, 5580RN, 5580RU, 5680, 5680A, 5680RN, NVR-8580, 8580RN, 8780, 8780RN, NVW-800

NOTE2: If you are trying to reset the password for your Swann Security account, please proceed to this article instead: Password Reset for Swann Security Account

This guide is intended for customers to reset their Swann recorder when they have forgotten their password.

Acquiring the password

If your recorder hasn’t been paired yet, proceed HERE.

When you pair your OS 5 recorder to your account via Swann Security app, you can get its password under recorder’s settings.

Simply go to Device Settings > choose your recorder. From here, you will then see the User name and Password. Tap the password to unhide it.

iOS	Android

 

Acquiring the reset code

The reset code on new recorders is acquired primarily by using the relevant client software on a computer. Other methods exist, but they usually require a level of networking knowledge over what we expect customers need to operate their system.

 

The reset code itself is a unique 12 character string that is generated by the unique hardware identifier of the network interface of the device, known as the MAC address.

 

Excerpt from the Hardware Quick Set Up Guide

 

To find your recorder’s reset code, connect the recorder to your router (if you have not yet done so) and install and run the software on your computer connected to the same router.

Installing the software

Download the software

Download Swann Security software on your Windows computer and install it.

If this prompt appears, click More Info then Run Anyway then continue with the installation.

 

Once installed, open the Swann Security program and follow the steps below:

1. Set a password – to protect you from anyone who wants to view your unit on your computer.
   
2. Set a security question – will be used when you forgot the password your set.
   
3. Login – just type in the password you’ve set earlier. Username is admin.
   
4. Search for device
   1. Click the Home icon (top-left) then choose Device Management
      
   2. Click the Auto Search (top) to get the MAC address of your recorder. Copy down any MAC address starting with the characters ’00-23-63′ or ‘BC-51-FE’ first, then any others. Replace the dashes (-) with colons (:).
      

Entering the reset code

You now use what you wrote down in the previous step to initiate a password reset on the recorder. On the Login interface, click Forgot Password.

On the recorder:

 

The reset code needs to be entered after clicking Forgot Password. Enter it in the Recovery field. Letters are in UPPERCASE with the colons (e.g BC:51:FE:11:22:33).

Click Unlock once done. A message will appear on-screen stating that your password has been reset. Click OK to continue.

 

Once this window appears, enter your preferred password (minimum of 6 characters).

You must enter an email address below so the next time you need to reset your password, the MAC address will be sent to your email; otherwise, you can write down your MAC address somewhere safe.

Click FINISH once done.

 

Notes

You will need to re-enter a new password every time you reset the password. The reset code CANNOT be used to login to the recorder nor can it be used for remote access.

Swann Security VMX Password Reset (Windows)

NOTE: This guide is for the following recorders : DVRx-4680X, 4680XN, 5680X, 5680XN

NOTE: If you are trying to reset the password for your Swann Security account, please proceed to this article instead: Password Reset for Swann Security Account

This guide is intended for customers to reset their Swann recorder when they have forgotten their password.

Acquiring the password

If your recorder hasn’t been paired yet, proceed HERE.

When you pair your OS 5X recorder to your account via Swann Security app, you can get its password under recorder’s settings.

Simply go to Device Settings > choose your recorder. From here, you will then see the User name and Password. Tap the password to unhide it.

iOS	Android

 

Acquiring the reset code

The reset code on new recorders is acquired primarily by using the relevant client software on a computer. Other methods exist, but they usually require a level of networking knowledge over what we expect customers need to operate their system.

 

The reset code itself is a unique 12 character string that is generated by the unique hardware identifier of the network interface of the device, known as the MAC address.

The simplest way is to scan the QR code on top and get the MAC address starting with BC51FE. Some phones have a built-in QR code scanner in their camera app but if none, you may need to download a 3rd party app like Google Lens in this example.

Once you have it, you can skip the rest of the step below and proceed HERE; otherwise, continue below.

 

Excerpt from the Hardware Quick Set Up Guide

 

To find your recorder’s reset code, connect the recorder to your router (if you have not yet done so) and install and run the software on your computer connected to the same router.

Installing the software

Download the software

Download Swann Security VMX software on your Windows computer and install it.

Once installed, open the Swann Security VMX program and follow the steps below:

1. Login – default username and password is admin & admin then click Sign in
   
2. Add device – choose Add devices manually then click OK
   
3. Search device – click IPV4 Search and copy the MAC address that will show above
   

Entering the reset code

You now use what you wrote down in the previous step to initiate a password reset on the recorder. On the Login interface, click Forgot Password.

On the recorder:

 

The reset code needs to be entered after clicking Forgot Password. Enter it in the Recovery field. Letters are in UPPERCASE with the colons (e.g BC:51:FE:11:22:33).

Click Unlock once done. A message will appear on-screen stating that your password has been reset. Click OK to continue.

 

Once this window appears, enter your preferred password (minimum of 6 characters).

You must enter an email address below so the next time you need to reset your password, the MAC address will be sent to your email; otherwise, you can write down your MAC address somewhere safe.

Click FINISH once done.

 

Notes

You will need to re-enter a new password every time you reset the password. The reset code CANNOT be used to login to the recorder nor can it be used for remote access.

Password Reset for Swann Security Account

This article will guide you on how can you reset the password of your Swann Security account.

	Open Swann Security then tap Forgot Password? below the Sign In button.
	Enter your registered email address and tap Reset Password.
	Now check your email (even your Spam or Junk folder) and click the link provided.
	It will open this webpage and you must then enter your new password then select Submit.

HomeSafe View recorders

HomeSafe View Password Reset

This guide is intended for customers to reset their Swann recorder when they have forgotten their password.

Acquiring the reset code

The reset code on new recorders is acquired primarily by using the relevant client software on a Windows PC or Mac computers. Other methods exist, but they usually require a level of networking knowledge over what we expect customers need to operate their system.

 

The reset code itself is a unique 12 character string that is generated by the unique hardware identifier of the network interface of the device, known as the MAC address.

 

Excerpt from the Hardware Quick Set Up Guide

 

To find your recorder’s reset code, connect the recorder to your router (if you have not yet done so) and install and run the software on your computer.

Installing the software

Download the software

If you are using a Windows computer and haven’t installed HomeSafe View yet, follow this article instead:
Swann Security Password Reset (Windows)

Otherwise, if you are using a Mac computer, install the software linked below:

• HomeSafe View for Mac

Once you have HomeSafe View software open, proceed below

Using the software

The first time you run HomeSafe View, you will see this screen.

 

Click on Next. A new window will show up. Click on Add online device located at the upper left.

 

Once your DVR shows on the list, click it once to see the MAC Address at the right side.

 

Copy down any MAC address starting with the characters ’00-23-63′ or ‘BC-51-FE’ first, then any others. Replace the dashes (-) with colons (:).

 

Entering the reset code

You now use what you wrote down in the previous step to initiate a password reset on the recorder. On the Login interface, click Forgot Password.

On the recorder:

 

The reset code needs to be entered after clicking Forgot Password. Enter it in the Super Password field. Letters are in UPPERCASE with the colons (e.g BC:51:FE:11:22:33).

 

If the window you see looks similar to the image below, you are in the wizard. The reset code CANNOT be entered in this area. Make sure to setup your new password and click NEXT. You can cancel the rest of the Setup Wizard if you want.

 

Cancel the wizard then open the right-click menu and select Main Menu (home button) to access the login window.

Once you enter in the “admin” username and reset code, the recorder will reboot. That indicates that the reset is successful and you will be presented with the window to enter a starting password after the recorder has finished rebooting.

HomeSafe Config Tool Password Reset (Windows)

For Recorder Models: DVRx-1590, 1600, 4480, 4480G, 4480V, 4575, 4580G, 4580V, 4680, 4680A, 4685, 4780, 4780V, 4980, 4980V, 5580, 5580G, 5680, 5680RN or NVR-7450, 8580, 8780

 

Before you start, please ensure that the following criteria are met:

1. Your recorder is connected to the modem/router.
2. A monitor and mouse must be connected to the recorder.
3. A Windows computer/laptop connected to the same network as the recorder.

Once you have everything in place, please follow the instructions below.

 

Getting the reset code

1. Download and install HomeSafe Config Tool
2. Open the software and you should see your device on the list. If not, click on Search.
3. Take note of the MAC address. If you can’t see it, scroll to the right.
   

Resetting the password

1. Get to the login screen on the recorder.
2. Click on Forgot Password.
3. Enter the MAC address that you took and replace ” – ” with ” : “. It should look like this – BC:51:FE:11:22:33
   
4. Click on OK once done.
5. You then need to set your new password. Please follow your Wizard Quick Start Guide.

SwannView Plus recorders

This section will show articles about resetting the password of your Swann recorders that uses the Swannview Plus app, such as our DVR 1500s, 1525s, 1550s, 1575s, 4350s, 4500s, 4900s, 8050s, 8075s, and the NVR 7090s, 7095s, 4K 8000s.

SwannView Plus Password Reset

Connect the DVR/NVR to a router or modem

1. Grab the Ethernet cable that came with the unit and connect one end to your DVR/NVR.
2. Then connect the other end of the cable to your router or modem.
   

   

Installing SwannView Plus or iVMS to your computer

1. Grab your computer (Windows or Mac) and install SwannView Plus. Click the link below for the download the latest version.
   1. SwannView Plus for Windows
   2. iVMS-4200 (v2.5.1.7) for Mac
2. Also, make sure your computer is connected to the same router or modem where the DVR is.
3. Once everything is done, open the SwannView Plus or iVMS.

Getting the MAC Address

1. Go to Device Management.
   1. If you cannot see this page, click on Tool > Device Management at the top instead.
2. Click Show Online Devices. 
3. Select your DVR/NVR by clicking at it once.
4. Check the software version of the DVR. If the unit has a firmware:
   

   1. Build 160801 or later: Take note of the MAC address and follow the next step.
   2. Build 160101 to above: MAC address first then follow the next step, if it fails please call our Technical Support line.
   3. Build before 160101: Please call our Technical Support line.

Resetting the password

1. Go back to your DVR/NVR and pull up the login page again by accessing the MENU.
   
2. Type the MAC address you got from the software using lowercase, no dash, and no colons.
   e.g. bc51fe810d61
3. Click on OK once you’re done.
4. The DVR will then reboot and display the Activation page.
   
5. You are then required to enter a new password that you prefer. Please take note of the MAC address you got in case you need to reset the password again; and of course your new password too. Click on OK once you’re done.

SADP Tool Password Reset (Windows)

This guide is intended for customers to reset their Swann recorder when they have forgotten their password. This guide is for the model series 7090, 7095, 7250 & 8000 which is up to date. If your recorder is not up to date, this method may not work and you will need to call Swann Tech Support and request assistance from an agent.

Acquiring the reset code

The reset code on new recorders is acquired primarily by using the relevant client software on a Windows PC. Other methods exist, but they usually require a level of networking knowledge over what we expect customers need to operate their system.

 

The reset code itself is a unique 12 character string that is generated by the unique hardware identifier of the network interface of the device, known as the MAC address.

 

Excerpt from the Hardware Quick Set Up Guide

 

To find your recorder’s reset code, connect the recorder to your router (if you have not yet done so) and install and run the software on your computer.

 

Installing the software

Download the software

The first step is to download the necessary software to your PC. A link to the software is below.

 

SADP Tool

 

Installation procedure

After you have acquired the software, proceed to install it. The software has a generic installation procedure that most computer users should be familiar with.

 

 

Immediately upon running the software, you may receive this prompt. This is a Windows security prompt, to make sure that malicious software cannot be installed without your knowledge. Click Yes to continue.

 

 

The installer opens to this window. Click Next.

 

 

Choose language and hit Next.

 

 

The default location is displayed here. You may choose a custom location if you wish.

 

Click Next.

 

 

Click Install to commence the installation. A progress bar will appear.

 

 

Once the installation is successful, you will be asked to create a Desktop Shortcut. Click Next.

 

 

Leave the checkbox ticked to immediately run the software after installation. Click Finish.

 

Using the software

 

 

The first time you run SADP, you may receive this prompt. As the SADP software requires network access, Windows Firewall will detect that activity and request your permission for the software to access the network. Do not adjust the check boxes. Click Allow Access to continue.

 

 

The software opens to the main page with various information displayed. You should see at least one entry here if your recorder is correctly connected to the network.

 

 

Scroll right using the scroll bar and you will get to MAC address. Copy down any MAC address starting with the characters ‘bc51fe’ first, then any others. Ignore the dashes as they are not necessary.

 

Entering the reset code

 

You now use what you wrote down in the previous step to initiate a password reset on the recorder.

On the recorder:

 

 

The reset code needs to be entered into the login window of the recorder. Enter it in the password field. Letters are in lower case just as they were in the SwannView Plus software.

 

 

If the window you see looks similar to this, you are in the wizard. The reset code CANNOT be entered in this area. Cancel the wizard then open the right-click menu and select Main Menu to access the login window.

 

Once you enter in the “admin” username and reset code, the recorder will reboot. That indicates that the reset is successful and you will be presented with the window to enter a starting password after the recorder has finished rebooting.

SwannView Link and AlwaysSafe recorders

This section will show articles about resetting the password of your Swann recorders that uses the Swannview Link and AlwaysSafe apps, such as our DVR 1580s, 3250s, 3425s, 4100s, 4400s, 4550s, 4750s, 4600s, 5000s, and the NVR 7085s, 7285s, 7300s, 7400s.

SwannView Link Password Reset

NOTE: This guide is for the following recorders : DVR-1000 (16ch), 1250, 1260, 1425, 1450, 1580, 2555, 2900, 3000, 3200, 3250, 3260, 3425, 3450, 4000, 4100, 4150, 4200, 4400, 4550, 4600, 4750, 5000, HDR6-8000, HDR6-8100, HDR4-8200, NVR-7072, 7082, 7085, 7285, 7300, 7400

This guide is intended for customers to reset their Swann recorder when they have forgotten their password. This guide is for the model series 1580 rev.1*, 4550 rev.1*, 4750, 7300 & 7400 which is up to date. If your recorder is not up to date, this method may not work and you will need to call Swann Tech Support and request assistance from an agent.

Acquiring the reset code

The reset code on new recorders is acquired primarily by using the relevant client software on a Windows PC or Mac computers. Other methods exist, but they usually require a level of networking knowledge over what we expect customers need to operate their system.

The reset code itself is a unique 12 character string that is generated by the unique hardware identifier of the network interface of the device, known as the MAC address.

Excerpt from the Hardware Quick Set Up Guide

To find your recorder’s reset code, connect the recorder to your router (if you have not yet done so) and install and run the software on your computer.

Installing the software

Download the software

The first step is to download the necessary software to your PC. A link to the software is below.

• SwannView Link for Windows
• SwannView Link for Mac
  (NOTE: If you are using Mac OS Catalina, go to this article instead: How to get the MAC address of a recorder using a Mac computer?)

Using the software

The first time you run SwannView Link, you will see this screen.

The software opens to the main page with various information displayed. Click on Add Device. You should see this below:

For Windows

For Mac

Copy down any MAC address starting with the characters ‘EC71DB’ first, then any others. Ignore the colons as they are not necessary.

Entering the reset code

You now use what you wrote down in the previous step to initiate a password reset on the recorder. On the System Login, click Forgot Password.

On the recorder:

The reset code needs to be entered after clicking Forgot Password. Enter it in the Super Password field. Letters are in UPPERCASE without the colons (e.g EC71DB5C4AF5).

If the window you see looks similar to the image below, you are in the wizard. The reset code CANNOT be entered in this area. Make sure to setup your new password and click NEXT. You can cancel the rest of the Setup Wizard if you want.

Cancel the wizard then open the right-click menu and select Main Menu (home button) to access the login window.

Once you enter in the “admin” username and reset code, the recorder will reboot. That indicates that the reset is successful and you will be presented with the window to enter a starting password after the recorder has finished rebooting.

Notes

You will need to re-enter a new password every time you reset the password. The reset code CANNOT be used to login to the recorder nor can it be used for remote access.

What is CCTV Camera Software for PC?

The Software for PC is designed and developed by the CCTV camera manufacturers for their security solutions and products. This helps to connect as well as control the CCTV cameras on PC. Here we provide you with the top 25 CCTV Cameras Software for PC.

Application of these CMS

These CMS allows users to connect and maintain the CCTV system with your PC. With these applications, it becomes easier to get the live view of your residence, family, office premises and locality. With these applications, You can access the CCTV from remote locations as well.

it is now easier to connect and maintain on your security online through CCTV cameras. CCTV cameras are the best security solution to enhance the security of family members and others.

Importance of the CMS

These CMS helps to connect as well as control the CCTV cameras on PC. These CMS acts as an intermediary between PC and CCTV camera set up to help the user client to provide access to the user of CCTV camera on PC. We will highlight some of the important functions which can be performed by the application.

• Remote Access.
• Connectivity and control
• Video Surveillance.
• CCTV Video recording.
• Live monitoring on a different viewpoint.
• PTZ camera controlling.
• Remote playback of the recording.

List of Top 25 CCTV Camera Software for PC

Here we will discuss in detail about the application for PC. We provide you with the top 25 CMS. CCTV cameras are available for Windows and Mac operating systems. But some CCTV manufacturers do not provide the application for Mac user clients.

The download file of every CMS is in the compressed format and use WinRAR to extract the downloaded file. Besides, get better knowledge regarding the CMS installation and setup procedure by clicking the links.

The list of the best CMS is as follows:

1. IVMS 4500 by Hikvision

IVMS is also one of the best CMS developed by Hikvision Company. This CMS is the best application in the market to connect as well as control.

Hikvision is a global leader in the provider of security solutions and products. Emphasizing on the comprehensive and highly skilled R&D team, Hikvision manufactures a wide range of products. Hikvision has broadened its field to smart home tech, industrial automation, and automotive electronics industries to realise its long-term goal.

Hikvision products also render powerful business intelligence for clients, which enables more efficient transactions and greater commercial profit. Hikvision is a global leader of IoT solution provider with video as its core competency. Hikvision now has above 19,000 R&D engineers. The company yearly funds over 9% of its annual sales revenue to research and development for continued product innovation.

IVMS 4200 & Storage Server

The application is provided by the Hikvision company. The free download link is provided below. IVMS 4200 installation procedure is here as well, click on the link of IVMS 4200. Also, read the instruction of IVMS 4200 storage server as well.

Download IVMS 4200 For PC (Windows) V3.1.1.13

IVMS 4200 For PC (Windows) Download VS V1.0.0.13

Free Download IVMS 4200 AC V1 For PC  AC V1.0.1.13

Download Multi lang.  IVMS 4200 For PC  Multilingual Package V3.1.1

IVMS 4200 For PC Multilanguage for PC   Multilingual Package AC V1.0.1

Multi-language VS V1  IVMS 4200 For PC   Multilingual Package VS V1.0.0

Free Download IVMS 4200 for PC (MAC)   MAC V2.0.0.10

Download IVMS 4200 Storage Server for MAC

Download IVMS 4200 Storage Server for Windows

IVMS 4500

We have provided you with the IVMS 4500 for PC free download link below. Get the free download link. Read the installation procedure of IVMS 4500 here.

Download IVMS 4500 For PC (Windows)

Download IVMS 4500 for PC (MAC)

2. Smart PSS by Dahua

We provide you here with the Smart PSS by the Dahua Company. The Smart PSS helps connect the CCTV cameras on your PC. The CMS has many features and functions to help the user to connect, live stream, PTZ control, etc.

Zhejiang Dahua Technology Company is a leading company in video-centric smart IoT products and service provider. Dahua Technology Company renders end-to-end security solutions, products, and services to create values for city operations, corporate management, and clients.

Dahua solutions, products, and services are in over 180 countries and regions. Dahua Technology has 54 subsidiaries companies and branch offices globally in Asia, the Americas, Europe, Middle East, Oceania, and Africa.

Smart PSS

Here is the free download link of Smart PSS for Windows and Mac OS. Also, read the instruction of installation procedure in the article of Smart PSS.

Smart PSS For PC Free Download (Windows)

Smart PSS For Mac Free Download

3. NVMS 1000 by TVT

NVMS is one of the famous application developed for the TVT CCTV camera brand. This application provides you with many features to administer your CCTV camera on PC. The CMS is a free download here, through this you can get the following features:

• Remote Access
• PTZ Control
• Live stream
• Recording videos

TVT brand of CCTV camera is manufactured and distributed by the Shenzhen TVT Digital Technology Company established in 2004 and headquarter in Shenzhen, also listed on the SME board of Shenzhen stock exchange in December 2016.

As a worldwide best quality security solutions and products provider in more than 120 countries apart from China. Ranking as the most advanced company that enters into the abroad market in the video monitoring industry in China, TVT has established an independent and perfect marketing service system.

NVMS 1000

Here is the download link for NVMS 1000 for Windows and Mac OS. You can read about the installation procedure as well by clicking on the link of NVMS 1000.

NVMS 1000 for Windows 10

NVMS 1000 for Windows 10

NVMS 1000 for Mac OS

NVMS 7000

Get the free download as well as free installation procedure on NVMS 7000. This is available for Windows and Mac OS.

Free Download NVMS 7000 for PC (Windows)

NVMS 7000 for MAC Download Free

NVMS 2.1

We provide the latest application provided by the TVT known as NVMS 2.1 for Windows OS. This CMS is only available for the Windows operating system. Read the installation procedure of NVMS 2.1 here.

NVMS Lite 2.1 Download Free

4. KVMS Pro by CP PLUS

We provide you here KVMS provided by the CP Plus Company. KVMS Pro provides you with a wide range of functions and features as well. With this, you can connect CP Plus CCTV camera setup with the application on Windows and Mac.

CP PLUS is the global leader in high-level security and surveillance solution. Inspired by the vision and commitment to make surveillance easy and affordable, CP PLUS has begun a mission to make the world a safe and secure community.

As per the IHS Survey 2017, CP PLUS attains as the most recent and most active brand to enrol the club of Top 4 security companies in the world and Top 2 in Asia. CP PLUS attribute their path-breaking success to sound R&D leadership. CP PLUS products pass through stringent quality-control tests and are globally certified by the certificates such as UL, CE, FCC, etc.

KVMS Pro

Here is the CMS of KVMS Pro free download link for Windows and Mac OS. Read the instruction of installation procedure to install the KVMS Pro here.

Free Download KVMS Pro for PC (Orange)

Free Download KVMS Pro for PC (Blank)

Free Download Indigo CVMS for Mac

Indigo IVMS for Mac Free Download Free

5. EZStation by Uniview

Here we are about to discuss the EZStation developed by the Uniview. With this, you can connect as well as perform other functions to control the CCTV camera on your PC. With this, you can get many features such as live view, audio-video recording, etc.

Uniview is the global leader of IP video surveillance. First-ever company to introduce IP video surveillance in China, Uniview is the third-largest player in the video surveillance industry of China. In the year 2018, Uniview has the 4th largest global market share in the surveillance industry.

Uniview has a wide range of IP video surveillance products ranges from IP cameras, NVR, Encoder, Decoder, CMS Client, and app, covering several markets sectors including retail, building, industry, education, commercial, and city surveillance.

EZStation

Get here the download links of EZStation as well as the installation procedure of EZStation.

EZStation for PC (Windows 32 Bit)

EZStation for PC (Windows 64 Bit)

Download EZStation for MAC

6. Guard Station by Uniview

Guard Station is also another applicaton provided by the Uniview Technology Company. This CMS provides you with a variety of software to connect as well as control the Uniview CCTV cameras. This app provides functions such as PTZ Control, live streaming, video recording etc.

Guard Station

Here is the free download link of Guard Station for Windows and Mac OS. For the process to install the Guard Station read here.

Guard Station Software Download for Windows

Guard Station For MAC

7. Wansview Cloud by Wansview

Here we provide you with the Wansview Cloud which is designed and developed by the Shenzhen Wansview Technology company. It provides you with the capability to monitor your premises from remote locations on your PC. Wansview App for PC helps to connect as well as control the CCTV cameras.

Established in 2009, Wansview dedicated to product design, development technology innovation, and professional manufacturing processes in the field of security solutions and products. Wansview has clients in more than 100 countries in the world, such as the United States, Germany, Britain, France, Canada, Spain, Italy, Russia, Brazil, etc.

Wansview Cloud

We provide with the free download of the Wansview Cloud for Windows and Mac as well as the installation method.

Free Download Wansview APP for PC (V1.0.2)

Wansview APP for PC Free Download (V1.0.3)

Download Wansview APP for MAC Free(V1.0.3)

8. MI Home by Xiaomi

Here we provide the MI Home for PC to connect the Xiaomi’s MI Home CCTV cameras. This CMS is only available for Windows and Mac OS. The application provides remote access, live view and connectivity at any kind of network.

Xiaomi Inc. is a China-based company which deals in electronics and security products. This company has been taken good care of its clients and has a greater market share by providing the product at affordable prices.

MI Home

Now get the free download of MI Home for Windows OS. Also, read the instruction to install the MI Home on Windows.

MI Home Security Camera App Download For PC

9. V380 CMS By V380 Camera

We provide you with the free download of V380 which is designed and developed by the V380 Camera. V380 software helps you to connect the V380 CCTV cameras and helps to maintain surveillance over the home, locality and office premises. The app is available only in Windows OS.

V380 Camera is a most-advance company that engages in R&D, production, marketing, and service of the V380 Wifi Smart Camera, V380 IP Camera, and V380 360 Panasonic Camera. V380 Camera is one wifi camera brand in the company which aids to create intelligent terminal products.

V380 Software

Get the free download of V380 for Windows OS. Also, read the installation instruction of V380 software here.

Download V380 App for PC

10. PVMS By Panasonic

Here we will discuss the PVMS software developed by Panasonic Company. PVMS is one of the best CMS provided by the Panasonic Company. This is available only for the Windows operating system, this application helps to connect the CCTV cameras, provide remote playback, System configuration and video intercom.

Panasonic is a Japanese company established in 1935, with more than 259,000 employees. Panasonic deals with different kind of CCTV cameras and software. Panasonic has been one of the largest electronic appliances manufacturer in many countries.

PVMS software

The free download link of PVMS is available here. Also, get the installation guide by visit the article of PVMS.

Free PVMS Download for PC

11. Idmss Lite by Dahua

Idmss Lite software is also provided by the Dahua Technology company. Idmss Lite for PC is available for free download. The performs various functions such as live streaming, PTZ control, playback video, record video, snapshots, etc.

Idmss Lite

We have provided the instruction of installation in detail in the link of Idmss Lite here.

Free Download Idmss lite for PC

Free Download Idmss lite for Mac

12. DMSS by Dahua

Get here the DMSS by Dahua Technology Company. DMSS is the mobile application provided by the Dahua Company. This app is available for Windows and Mac user client, this CMS provides the user access to their Dahua CCTV cameras.

DMSS

Here is the free download of the DMSS as well as the procedure to install the DMSS software.

Free DMSS  for Windows 7/8/10 Download

Free DMSS for MAC Download

13. EZVIZ App by Uniview

EZVIZ App is also another application designed and developed by the Uniview Technology Company. This CMS helps to connect the as well as provides multilingual support to the users. This software is available for Windows as well as Mac OS.

EZVIZ App

Download free and also read about the installation procedure of EZVIZ App here.

Download Ezviz App For PC Windows 7/8/10

Download Ezviz App Video Plugin  Windows

Download Ezviz App Video Plugin

14. Velocity by HiFocus

HiFocus CMS is designed and developed by HiFocus Electrovision Company for its security solutions and products. HiFocus CMS helps to connect as well as control the CCTV cameras on your PC. HiFocus CMS for PC is the best security solution provided for the HiFocus CCTV system in the market.

Hi-Focus aims to bring the most advanced CCTV surveillance systems that can combine high volumes of data to produce essential information. The system provides users with advanced scrutiny, analysis, interpretation, and management. HiFocus assistance helps in the deployment of fast and intelligent security system solutions through a complete analysis based on the position and location of the device.

India’s trusted CCTV Company, Hi-Focus provides its customers with the best end-to-end video analytics solutions with the best surveillance cameras accompanying integrative proficiency to understand customer’s behaviour and other essential operational indices.

Velocity

Here is the free download of Velocity by the HiFocus, also read the installation procedure of Velocity.

Free Download Hifocus CMS Software for PC

Hifocus CMS Software for MAC Free Download

15. Smart Viewer By Hanwha (Samsung)

Hanwha Security Company has developed the Smart Viewer to connect the Hanwha CCTV cameras. The CMS provides you up to 72 channel of CCTV cameras view on screen, search recorded data by event type and date, export video and dual monitor support.

Hanwha Techwin America (Samsung Techwin) is a security technology company that has exhibited stable growth for the past 40 years and is part of the Hanwha Group. Hanwha Techwin is a Fortune 500 company and also one of the conglomerates in South Korea considered to be the largest.

The Hanwha Group has the expertise of over 60 years in the manufacturing of the video surveillance industry. The company has created many clients across the globe by providing the best quality product and services.

Smart Viewer

The link to download the Smart Viewer is free here. And visit the installation procedure article of Smart Viewer.

Download Smart Viewer For PC (Windows)

Download Smart Viewer For MAC

16. Wiseview by Hanwha (Samsung)

There is another software also to connect the Hanwha CCTV cameras also known as Wiseview. This provides you with some features as dual-screen assistance, live streaming, log administration, and user management.

Wiseview

Get the download of the Wiseview for free and installation guidelines as well.

Free Download Wiseview for PC (Windows)

Wiseview for MAC Free Download Free

17. Night Owl Connect By Night Owl

Night Owl Connect is designed and developed by the Night Owl Company for Night Owl CCTV cameras. This software has features such as IP device configuration, group management, main preview and log search functions. This feature helps the user to connect the CCTV cameras.

Night Owl Security Company is a leading innovator in the security technology industry. It is the fastest-growing manufacturer of security solution and products which offers the best value on the market. This is accomplished by designing and engineering products that are of high quality, user friendly, and affordable.

Night Owl Connect

Download free Night Owl Connect software for Windows and Mac OS. Read the guidelines for installation of Night Owl Connect.

Download Night Owl Connect for PC (Windows)

Download Night Owl Connect for MAC

18. Guarding Vision

Here is the Guarding Vision for PC developed by the Guarding Expert. This CMS helps us to connect as well as control the CCTV cameras on PC. This provides you ability to connect multiple CCTV camera brand on the same software. This application is available for Windows and Mac operating system. Guarding Vision helps us to detect motion as well.

Guarding Vision

Now download free Guarding Vision for Windows and Mac as well as learn about the installation procedure.

Free Download Guarding Vision for PC (Windows)

Guarding Vision for MAC Download Free

19. HiP2P Client by Dericam

Here we provide you with the HiP2P Client software for connecting and administering the Dericam CCTV cameras for PC. HiP2P Client is available for Windows and Mac user clients, this provides you with the ability to control Dericam CCTV cameras on PC.

Shenzhen Dericam Technology Company was formed and established in the year 2010. The company is developing, manufacturing, and marketing IP cameras and storage devices for home security field. Currently, Dericam has clients in the US, Australia, Netherlands, France, Poland, and other countries as well.

Dericam aims to innovate and develop its products to meet the demands of customers. Dericam continues to innovate and develop the quality of its products, enable everyone to enjoy the benefit of advanced technology. All series of products are CE & FCC certified.

HiP2P Client

Here get the download of HiP2P Client for free and read carefully the installation method of HiP2P Client.

HiP2P Client Software Download Free

HiP2P Client Software Download For MAC

20. YI IoT By YI Technology

Here we will discuss in detail about the YI IoT software which is designed and developed by the YI Technology Inc. YI IoT software helps you to connect the YI IoT camera and YI Dome Camera on your PC. This software provides you with cloud encryption and real-time push notification alerts. This is only available for Windows OS only.

YI Technology strives to deliver enhanced security and productivity to clients globally through high-quality hardware and cutting-edge. YI Technology is committed to rendering users with convenient and affordable technology emphasizing the latest and greatest Edge Computing features as well as highly advanced AI algorithms.

YI Technology develops and manufactures intelligent video and imaging solutions using the latest technology to solve real problems for its clients. YI Technology values its clients’ security and privacy and employs a 128bit end-to-end encryption to keep clients data safe.

YI IoT

Here get the free download now of the  YI IoT as well as the installation method for Windows OS.

Free Download YI IoT App for PC

21. YI Home By YI Technology

Here is another software developed by YI Technology known as YI Home. This also helps to connect as well as control the YI Home and YI Dome cameras on PC. This provides various features which are similar to YI IoT.

YI Home

Get the YI Home free download link and installation procedure guidelines.

Free Download YI Home App for PC (Windows)

YI Home App for Mac Free Download

22. DW VMAX By Digital Watchdog

Let us learn about the DW VMAX software which developed by the Digital Watchdog a leading CCTV camera manufacturing company. The DW VMAX is available for Windows, Mac and Linux OS. The has features such as PTZ control, live image quality enhancement, zoom in and out option on live streaming, multiple as well as single video export, 4/6/8/16 or 32 Channel view on PC and audio communication.

Digital Watchdog (DW) is a leader in surveillance cameras and associated video management, delivering complete video surveillance solutions for HD over Coax and HD IP CCTV systems of any size and for any application.

DW VMAX

Get the free download of DW VMAX for Windows, Mac and Linux OS here, read the installation procedure correctly of DW VMAX.

Free Download DW VMAX for PC Windows x64(Version – 4.1.0.31401)

DW VMAX For MAC Download Free x64(Version – 4.1.0.31401)

Download DW VMAX For Linux Free x64(Version – 4.1.0.31401)

23. CloudSEE by Jovision

We provide you with CloudSEE developed by the Jovision Technology Company. CloudSEE helps to connect the Jovision CCTV cameras. This provides video recording on a live camera, play recorded videos., assistance real-time playback when preview, playback supports quick, slow, and by frame modes, local snapshots, and recordings and files stored locally.

Jovision Technology Company established in the year 2000, is the world’s preeminent manufacturer and distributor of video surveillance products and solutions. Jovision is recognised in developing and manufacturing highly advanced video surveillance products.

Following are the new main researched and developed product of Jovision Company, smart IP cameras, WiFi cameras, NVR, DVR, HD Analog cameras, CMS video management software, alarm systems, encoders, decoders, and CCTV modules. Jovision’s expert engineers also provide customized security solutions.

CloudSEE

Here is the free download of CloudSEE for Windows OS because the CMS is only available for Windows OS. Also, read the installation procedure carefully of CloudSEE.

Free Download CloudSEE For PC

24. SwannView Link by Swann

We will discuss in detail about the SwannView Link developed by Swann Communication is the best CMS to connect the Swann CCTV cameras. SwannView Link helps you to connect the CCTV cameras on your PC. This provides brightness adjustment, live view and application user management.

Swann has always been a leader. Begins its business from the Swann’s personal house basement in Melbourne, Australia. Swann has established and created its clients in the USA, Canada, Australia, UK, Hong Kong and China and also in other 40 countries.

Swann provides surveillance and monitoring technology by introducing its new product such as wireless HD cameras, video surveillance recording systems and cameras, and also 4K Ultra HD, 3-5 Megapixel HD, and 1080p HD camera setup with temperature and motion sensors technology.

SwannView Link

Get the download free now of SwannView Link, read the instruction of installation of SwannView Link.

Download SwannView Link For PC (Windows)

Download SwannView Link For PC (MAC)

Download SwannView Plus For PC

25. Amcrest View Pro by Amcrest

Here is the Amcrest View Pro designed and developed by the Amcrest Company. This application helps to connect the Amcrest CCTV cameras on your PC. This CMS provides features such as user management, live streaming, playback recording, etc.

Amcrest products are advance designed remote monitoring and surveillance systems which build a bridge between powerful capabilities, ease of use and affordability. With high quality and robust design, Amcrest cameras allow the user to securely monitor their residence, office premises etc. Amcrest camera systems are designed to record and produce live video and audio to the user anywhere in the world.

Amcrest is a top security products manufacturer as well as distributor servicing many clients worldwide primarily across the United States, Canada, the UK, Germany and France. Amcrest provides after-sales support and local warranty services to all of our customers in their local countries for free of cost.

Amcrest View Pro

Here is the free download of Amcrest View Pro free download and installation guidelines.

Free Download Amcrest View Pro for PC (Windows)

Amcrest View Pro for MAC Free Download

Conclusion

Here we have discussed some of the top 25 CCTV camera software for PC. These are the best softwares to control the CCTV cameras on your PC. The softwares are available to download free.

This CCTV software provides you with many features like a live recording, video snapshot, audio-video display, motion detection, night vision, and alarm notifications as well. With these CMS it easier to connect as well as manage the CCTV cameras.

We have discussed in detail about the “Top 25 CCTV Camera Software for PC“ in detail with the free download link of the software as well. For more information and query you can contact us by commenting on the comment section below of the article.

1. Download the latest version available.
   1. If you have a Windows computer, click this link: SwannView Link for Windows
   2. If you have a Mac computer, click this link: SwannView Link for Mac
2. After doing so, install it then open it.
3. Once SwannView Link is open and it already shows a device at the right, this means it already detects your DVR or NVR.
4. If so, click here and proceed to Modifying existing device.
5. If not, continue to Adding the device on the list.

Adding the device on the list

1. Click on Add Device  located to the right.

2. A window will show up, all you need to do is to type all necessary information:
   1. Device Name: < any name >
   2. Register Mode: UID
   3. UID: < UID code > NOTE: you can find this at the top of your DVR or NVR
   4. User Name: < DVR’s username >
   5. Password: < DVR’s password >

3. Click OK to save the settings then proceed to changing stream settings.

Load More : SWANN LATEST FIRMWARE UPDATES

Modifying existing device

1. On your device at the right, click the edit icon.

2. It will open a window that can let you edit the settings.
3. Change the Register Mode to UID.
4. Type the UID code of your DVR or NVR to the right.
5. Change the password with the password you set on your DVR or NVR.
6. Click OK to save the settings then proceed to changing stream settings.

Changing stream settings

For smooth live streaming, it is highly suggested to use Substream when playing the videos. We will also need to set the substream’s bitrate to its lowest for the unit not to consume too much bandwidth.

1. Click the settingsicon.

2. Select Encode.

3. Change the Stream Type to Fluent and set the Maximum Bitrate (kbps) to its lowest.

4. Click on OK to save the settings. You don’t need to worry because when you export recordings, they will still be clear because those use Clear settings.

Viewing the cameras

To view the cameras, all we need to do is to click the Play button and select All channels fluent to load all cameras in substream.