Can I add cameras over the network?

Yes, you can add cameras over the network, they do not have to always be connected directly to the NVR. You can use a switch on the network that connected to the same router as your NVR. Please follow these steps to set this up:

Log into the NVR and go to Camera>Camera Management, click on Manual Add, and enter the IP information for the camera. Use the default username: admin password: 123456

Can I connect all the cameras to a switch, then the switch to one of the NVR ports?

No, unfortunately each port on the back of the NVR is only designed for 1 camera. This will only allow about 2 cameras to show up. To use a switch, you’ll have to connect the switch to the same router that the NVR is connected to. Then you’ll proceed to setup the cameras over the network. Please see the Adding cameras over the network FAQ.

Can I use my PC to view my cameras remotely?

Yes, you can use your external IP address to view your cameras and manipulate configuration via Web Browser. Our plug in will only work on Internet Explorer or Mozilla Firefox. Once one of those browsers are open, type in your external IP address in the URL bar. If the port forwarding is done correctly, it should bring you to your NVR log in page. Log in using the same credentials as you would directly on the system. After you’re logged in, click the link to download and install the plug in. Restart the browser and click the “All Main” button on the left-hand side, and it should bring up your camera streams.

LaView NVR setup and user guide

Read Also : LaView DVR User Guide

Can I use port forwarding to setup remote viewing for my NVR?

Yes, you can setup your system via port forwarding. Although, this setup is recommended for more advanced users. You will need to note the IP Address of the NVR/DVR. To obtain this, go to Main Menu>Maintenance>System Info>Network, your IP address will be the IPv4 address at the top. Then you’ll need to log into your router via web browser on a PC. Once logged in, you’ll need to add ports 80, 8000, and 554 to the port forwarding rules. For help with port forwarding for your router, contact the manufacturer or your ISP. There are also guides for a lot of various models of routers here https://portforward.com.

The port forwarding setup should look something like this:

Application   Start     End         Protocol   IP Address

DVR1                 80           80         TCP            192.168.x.x.

DVR2               8000      8000       TCP            192.168.x.x.

DVR3                554         554       TCP            192.168.x.x.

To make sure test the ports on www.canyouseeme.org, and if they are open you can add the information to your phone app.

LaView Net App Setup:

*Make sure Wi-Fi is off on the phone when attempting the remote view.

How do I change the camera names on my system?

To change the camera names go to Menu>Camera Management>Advanced>Basic>IP Camera Name. In that section, you can edit the “Camera Name” Option, please click apply at the bottom before selecting another camera.

How Do I Set up Remote Viewing for My Surveillance System?

Assuming you have the IP address of the NVR/DVR, there is a 4-step process to set up remote viewing. Learn more about remote view camera set-up here.

Are There Any Cameras that Also Allow Me to Monitor the Audio as Well as the Video?

Yes, we have multiple solutions available to our clients. Here is our most popular audio camera.

Does the Surveillance System Come with All of the Wires, Switches, and Accessories I Need?

Yes. The kit comes with everything you need to install the system and begin recording immediately, including  any necessary wire, PoE switch, or AC 12v adapter required for the system to operate.

How far Apart Can I Set up My Wireless Cameras?

The environment, particularly barriers such as cement walls, steel structures, or large trees, play a big role in transmission distance. A wifi camera will typically transmit well for about 150 feet outdoors and 50 feet indoors.

How do I connect my NVR to my Phone?

Please download and use LaView Patrol:

Note: The app set up is done on an Android device, the iPhone set up will be almost identical.

2. Click on the “BACK” button. Tap the “+ Device” option to add a device.

3. Enter IP address information and click “Save”. Your new device will be on the previous screen. To obtain his IP address go to Main Menu>Configuration>Network. Your IP address will be the “IP address”. (Please note: This setup will only work inside the local network. To enable remote viewing, setup port forwarding and use your WAN IP address from your network. See port forwarding instructions.)

4. Select new device and choose the channels you wish to see, click the Play/Live button.

How Do I find my system’s IP address?

To find your system’s IP address go to Main Menu>Configuration>Network. The IP Address at the top is your local IP. If your IP address is 0.0.0.0 or 192.0.0.64, this means your system is offline. There are a few causes from this, but usually it’s a bad ethernet cable or the cable is not plugged in properly to either the NVR or Router. If those are checked to be correct, try restarting your router by unplugging it for a minute and restarting the DVR.

Do I Need Internet to Activate My Wireless Security Camera System?

Not exactly. You can set up your wireless security camera system without any internet at all, as this is not a requirement to begin recording. In order to access remote viewing on your mobile devices, you will need a live internet connection.

Does the Surveillance System Come with All of the Wires, Switches, and Accessories I Need?

Yes. The kit comes with everything you need to install the system and begin recording immediately, including  any necessary wire, PoE switch, or AC 12v adapter required for the system to operate.

Are There Any Cameras that Also Allow Me to Monitor the Audio as Well as the Video?

Yes, we have multiple solutions available to our clients. Here is our most popular audio camera.

What are the Advantages of Installing a Wifi Security Camera System?

A wifi security camera system is significantly easier to install than a traditional system, because there is no need to run special wires to each wifi camera. This not only helps the day of installation, but also allows clients to position cameras in places they might not otherwise be able to place them.

How Do I format my HDD?

To format your HDD you’ll need to go to the Main Menu>System>Storage>Management Tab. Once in the HDD menu, highlight the HDD information. Then click on “Format” at the bottom. Please note this will delete all information off the HDD.

How do I playback my recordings?

To playback videos go to Main Menu>Playback. In that section choose your camera(s) on the right-hand side. Then double click any of the days on the calendar. This should automatically start playback for that day. Use the bar at the bottom to jump to a specific time during that day.

How Do I set up my recording schedule?

To set the recording schedule you’ll need to go to Main Menu>Configuration>Schedule>Record Plan. In that section, you’ll have access to each channel’s recording schedule. The camera’s will automatically start and stop, recording, at desired times. If you want to set up only motion recording to each camera, select “Setting” on the right-hand side for the desired day. Choose MD for Motion Detection for the day and set a desired time, if not all day. Then you can copy the schedule to other days at the bottom. Click apply then ok, then apply again. You can now click copy at the bottom and copy the schedule to other channels as well. Or choose another channel at the top to setup a different schedule.

How Do I upgrade my system’s Firmware?

Make sure to download your firmware from our website here: https://www.laviewsecurity.com/cms/download/

Once the file is downloaded, extract the file and place it onto a flash drive. Then connect the flash drive to a USB port on the NVR.
Please go to Main Menu>System>Maintenance>Version and select upgrade. Choose your Firmware file from the list.

How to I download videos off my NVR?

To download video footage you’ll need a flash drive inserted into one of the USB ports on the system. Then go to Main Menu>Backup. Once in the Backup page, you’ll need to select the USB device from the list. Then click on “Backup” at the bottom and you’ll have the file selector screen show up. Make sure AVI is checked, then proceed to backup. You can select a specific channel along with date and time you want to backup. Click on Add, then the list should update. Each file will have a start and end time. Check mark the files desired for back up and click backup at the bottom. Once the progress bar finishes, you now have the files on your USB drive.

I forgot the password for my system, how do I reset it?

Please email us at info@laviewusa.com to reset the password for this system. In the email please mention you need a password reset along with the model number and date that displays on the main view of the system. A technician will reply with some instructions and a temporary password for your system.

I have port forwarding setup, but my external IP address keeps changing. Can I fix this?

Yes, you can either contact your ISP and ask them for a static IP address or setup a DDNS. LaView does offer a free DDNS service that you can setup with these instructions:

To set up a DDNS please go to www.laviewddns.com and register.

After registering and creating your domain name we need to enable the DDNS feature.

Please go to Main Menu>App Center>DDNS.

Enable DDNS: √ (Checked)

DDNS Type: Laview

Domain Name: “yourdomainname”.laviewddns.com (“yourdomainname” is the name you created don’t use that or the “ “)

User Name: your email account used for www.laviewddns.com

Password: password used for www.laviewddns.com

Server IP: Laviewddns.com

Port: 8000

Please note, in order for the DDNS to work, port forwarding must be setup. You can now use your Domain name to access your system instead of IP.

I have some trees in my yard that are triggering my motion detection. How can I fix this?

You can setup areas for your motion recording within the camera’s configuration. Go to Main Menu>Configuration>Alarm>Set Area “Setting”. In that section, you’ll have a preview of one of the camera along with a red grid over it. You can clear the area and only draw specific areas with motion detection. Or you can just remove the areas by clicking and dragging over the red boxes. Everything in red will trigger motion, anything clear will not.

Which mobile app do I need?

-If you have DVR starting from LV-N52xxxx please download “LaView Patrol”

-If you have DVR starting from LV-N9xxxx, LV-D11xxxx, LV-D21xxx, or LV-T94xxxx, please download “LaView Net”

-If you have DVR starting from LV-D04xxxx, or LV-D51xxxx  please download “LaView Mobile”

The system worked seamlessly until last week when it suddenly shut off and now won’t come back on

Would suggestion you follow the instruction below for troubleshooting,

1.Please ensure the cameras are connected, would suggest you to connect them directly to the PoE ports at the back of the system.

2.At the day time, try to cover the camera lens with your hands to see if there is a IR red light on the problematic cameras. And please also check if the camera goes hot when it is connected.

3.The camera appears not to get powe if there is no light and heat. We will need to check if it is the camera/port/cable issue.

1.At first, please switch the problematic camera to the workable PoE ports to test. You can also go to your PoE Configuration setting to check the power.

2.If it still doesn’t work with another port, please exchange the cable to check again. If possible, you can also add the camera to another system to confirm the problem.

Please contact our support team for further support if it does not help.

What should I do if I connect a LaView Saturn Camera to LV-N96, LV-N95, LV-N98 series NVR but only get 720P maximum resolution in main stream?

If you only get 720p in mainstream, it means the IP camera is set to H.265. Please use the following instruction to switch the camera to H.264 compression.

What features are LaView Saturn Series Camera compatible with LaView (LV-N95, LV-N96, LV-N98, LV-N99) Series NVR?

LaView Saturn Series IP Cameras have many great features designed to work with LaView Saturn Series NVR. If you already have a LaView NVR and wish to add a LaView Saturn IP Camera, you can do so using this instruction. However, we recommend using LaView Saturn Series IP Cameras with a LaView Saturn Series NVR for best performance.

The following features of LaView Saturn IP Camera are compatible with LaView Series NVR:

The following features may NOT be compatible

How to reset LaView Saturn IP Camera

3. Press and hold the reset button for at least 5 seconds until the camera restarts, and then the camera will be restored to factory default settings.

How to connect a LaView Saturn Series IP Camera to a Non-Saturn Series NVR

5a. If you are connecting the camera to the NVR PoE port, set up the Target IP to 192.168.254.xxx (xxx being a random number from 2-254), and Gateway to  192.168.254.1, Subnet Mask 255.255.255.0. Then unplug the camera from the PoE switch or Router and connect it to the NVR using Cat5e cable.

5b. If you are connecting the camera via LAN, use DHCP or set up the IP address to your network range. For example: Target IP 192.168.0.217, Subnet 255.255.255.0, Gateway 192.168.0.1

6. Go the NVR Menu => Camera => Camera.

7. Click on the channel which the camera is connected to (ie if the camera is connected to port 3 on the back of the NVR, click on channel 3). If you are connecting the camera via LAN, Click on any unused channel.

8. Change ‘Plug and Play’ to ‘Manual’ and enter the camera IP address (192.168.254.xxx or 192.168.0.217 as in previous example)

9. Change protocol to ONVIF and Management port is 80

10. Enter user name and password you set up when you activated the camera in step 3.

.

.

What error message do you see on the screen?

We need to identify first the error message that your screen shows.

 .

 (from a DVR-4900/8075)
 (from a DVR-5580/5680)

 .

Here is an overview of the things we need to check:

 .

1. Camera to extension cable connection

For some of you who installed the cameras already and forgot to test the cameras first, that’s alright. You can skip this step for now. You just need to make sure that the 2 connectors of your camera are both connected firmly to the extension lead; otherwise, you might end up with a powered camera but no video connection or a powerless camera with a video connection. Check the image below, that’s how your camera needs to be connected to the extension cable.

a. Connect the power connector

b. Then connect the BNC video connector

Here is what it should look like after the connection.

2. Extension cable to power splitter

The extension will have 2 connectors on each end and you already used one end for the camera’s video and power connection. The other end of that cable needs to be connected to the power splitter especially if you have multiple cameras on your setup (disregard the splitter if you are dealing with an additional camera since it will come with its own power supply). The splitter will have 4 leads on one end and a single lead on the other. Pick one lead from those 4 and connect the power lead of the extension cable to it. See the image below on how it should be connected.

.

3. Power splitter to the power adapter

Grab the single lead from the splitter and connect it to the power adapter. Use the provided 12v power adapter from the kit. Then plug the power adapter into a working power point, wall outlet, or power board.

4. Extension cable to the DVR

Going back to the extension cable, we are left with one connector. That connector will be connected to the ports at the back of the DVR. These ports are normally labeled as Video In or Video Input. You need to push the BNC connectors and twist them to lock them firmly to the DVR. Check below on how to connect the BNC cable to one of the video connectors at the back of the DVR.

You are all set! Live feed from the cameras should now display on the TV/monitor. If in case it didn’t, you might want to check Video Loss Troubleshooting for DVRs for some advanced troubleshooting.

Swann DVR Troubleshooting Guide

Read More : Swann Camera Troubleshooting

.

Hard drive warning: Unformat error / Status: Abnormal 

This applies to recorders that were pre-installed with internal hard drives (HDD) and worked before. This error or warning appears when the hard drive is no longer recording or can no longer be accessed but is still detected.

 .

A. The HDD LED is solid, indicating the hard drive is still detected but is not reading/writing.

B. The HDD status (Menu > Device > HDD) shows “Abnormal” or “Unformat error”.

C. The HDD Free/Total capacity shows 0GB.

 .

A. & B. If Unformat error / Abnormal error shows

Do each step in the following order to remedy the issue:

A. & C. If Total Capacity is 0GB

Do each step in the following order to remedy the issue:

Note: Formatting will not erase the Swann firmware.

.

No hard drive or hard disk found 

This applies to recorders that were pre-installed with internal hard drives (HDD) and worked before. The following are signs that the hard drive is no longer detected in your DVR / NVR:

A. The HDD LED is off.

B. The HDD status (Menu > Device > HDD) is blank, meaning No. 1 is empty.

C. You may have experienced an outage or changed the power adapter.
.

A. & B. If you changed the hard drive recently

Bear in mind that only certain types of hard drives are compatible with CCTV security systems.

• We recommend using a surveillance-rated hard drive of the same size dimensions and storage capacity as your recorder’s hard drive, such as the Western Digital Purple, Seagate Skyhawk, or Toshiba Surveillance range of drives. If you wish to know the maximum capacity and size compatible with your DVR or NVR, you can request a Chat for “hard drive” and follow the prompts.

• Solid State Drives (SSD) for DVRs are NOT ideal for continuous recording, operation in high temperature setting, and large disk space. A DVR’s intention is reliability not speed. SSDs are very fast, but it will wear out eventually when writing happens frequently. Using an SSD is at your discretion.

• Desktop hard drives are not recommended as their low speed can cause playback skipping and errors. They are not optimized to support 24/7 read-and-write access.

Please visit Installing an additional Internal Hard Drive (HDD) for 16-channel Recorders for an example of how to change the hard drive of your recorder.

 .

A. & C. If you experienced an outage recently

The power adapter for your recorder was designed to protect the DVR or NVR in the event of a surge or power outage as adapters can be replaced easily unlike the whole recorder. Chances are the power adapter may be providing insufficient power for full recorder function (which includes the hard drive).

1.Ensure you are using a power adapter with the correct output rating for your recorder. See What power adapter should I use? for your DVR, NVR or NVW.

2.In the event of an outage, unplug all connections at the back except the TV, mouse and power adapter. This is to check whether the hard drive will be detected and whether the power adapter is still providing some power.

3.Change the power adapter to a known working one that has the same output rating as in step 1.

If the hard drive is detected after unplugging the cameras, chances are the power adapter is providing insufficient power and requires replacement.

If you are already using a compatible hard drive and a known working compatible power adapter, chances are the hard drive needs to be replaced. Please check What hard drives can I use with my DVR or NVR?

Swap DVR Power Adapters for Boot Issues 

The power adapter of the DVR and the power adapter of 4 PRO- camera models are interchangeable as long as they have the same output rating of 12V 2A.

We do this to test whether the power adapter is faulty or the DVR is faulty. Power adapters are designed to protect the DVR in the event of power outages or power surges.

Warning: Do NOT use a power adapter higher than 12V on the DVR. Doing so will void your warranty.

Step-by-Step Instructions

Note: If you have 8 cameras or more, you can swap the cameras’ power adapters instead of the DVR power adapter as long as both camera power adapters have the same output rating.

.

What hard drives can I use with my DVR or NVR? 

This applies to Swann recorders with pre-installed internal hard drives for recordings. The type of hard drive compatible with Swann DVRs and NVRs are surveillance-type hard drives, which are connected via SATA cable. Before you decide to upgrade your internal hard drive, you MUST know the type, capacity, and size that your model is compatible with:

Compatible Type by Brand

 The following surveillance hard drives are compatible with Swann recorders:

• Seagate Skyhawk by Seagate

• Western Digital Purple by Western Digital

They vary in capacity and size, so check below to identify what is compatible with your recorder.

Compatible Capacity

This is the maximum number of storage capacity in gigabytes or terabytes that a hard drive has which varies in compatibility with your recorder.

Most Swann recorders are pre-installed with a hard drive internally. If you wish to upgrade the capacity of your hard drive, you need to check with our Technical Support for the maximum capacity that your recorder model will support. The maximum capacity varies by model number.

Customers with Swann Security and HomeSafe View app-compatible products can inquire via phone.

Compatible Size

Should you wish to upgrade your hard drive, ensure to acquire the same size dimensions as the one in your recorder. Surveillance-type hard drives come in two sizes:

If you are unsure, customers with Swann Security and HomeSafe View app-compatible products can inquire via phone.

Compatible with External Hard Drives

If your DVR or NVR has an eSATA port on the back panel, it means your recorder is capable of connecting an external surveillance-type hard drive.

The function of the external eSATA port may either be for exporting recordings or recording depending on the chipset of your recorder model. For example: Can I use an external SATA hard drive to my DVR8-3000 to increase recording capacity?

The following recorder series have an external eSATA port for a hard drive of up to 3TB in capacity for external recording:

Compatible microSD Cards 

If your recorder model contains a microSD slot, it can support up to 128GB capacity for the microSD card.

The following recorder models are compatible with up to 4TB capacity for the hard drive and 128GB capacity for the microSD card.

Note: Simultaneous recording to both the internal hard drive and microSD card is not supported. If there is a hard drive internally, recording to the hard drive will be prioritized.

Not Compatible

DVR/NVR went offline after an outage or changing routers or Internet Service Provider 

This article applies to DVRs or NVRs that are hardwired to your router, and affects mobile or computer streaming, push notifications, and other features requiring internet connectivity.

The DVR or NVR going offline is a common occurrence when changes were made to the router, its settings, an outage, or changes in IP by your Internet Service Provider (ISP). In order to get it back online, you must have physical access to the DVR or NVR to check the following:

1. If there was a Power or Internet Outage

Normally, turning off the recorder and then turning it back on again will get the DVR or NVR to re-establish communication with your router. However, this will only work if its Network setup is set to DHCP by default. This ensures that the router is able to detect the DVR/NVR via ethernet and update its IP address.

If rebooting did not work, please try additional steps from this article: Remote Access – Basic Router/Network Troubleshooting.

If the live view is blank, then the outage may have affected the power supply. Check this article to troubleshoot: Troubleshoot a Boot Failure or Rebooting issue of a Recorder (DVR/NVR/NVW).

2. If you changed or replaced the router (changed ISP)

See types of routers that may or may not work with the DVR or NVR in this article: Network Setup: What do I need for my DVR/NVR to go online?

If the router is compatible, then the connection between the recorder and the router just needs to be refreshed. See this article for the first few steps to re-establish the network connection: Remote Access – Basic Router/Network Troubleshooting.

3. If you added another router or extender

Ensure that the network connection setup has not changed. If the DVR or NVR is still connected to the same router, but that router was connected to a cable modem instead of a wall, then the setup is no longer a direct connection but a bridged connection.

See why the DVR or NVR may not work with a bridged router or particular extender in this article: Network Setup: What do I need for my DVR/NVR to go online?

How to factory reset my DVR / NVR (V8) 

Default Settings VS Factory Reset

To load settings to default in recorder models, you must be logged into the recorder via TV and mouse or computer software.

How to restore settings to factory default via TV and mouse

You must know the user name and password of your recorder in order to do this method. If you do not know the password, you need to perform a password reset instead. See How to reset the password or get the recovery code of your DVR/NVR/NVW

1.Right click on Live View or go to the Task bar.

2.Choose the first icon: Setup.

3.Go to Advanced > Maintain (tab).

4.Click on Load Default.

5.Check System> Save.

You will be taken to the Startup Wizard to set a new password. See Frequently-asked questions and tips to complete the Startup Wizard

How to restore to factory default via Windows software

The DVR or NVR must already be added in the software beforehand and is online in order to do this method. If your DVR or NVR has not been added, you need to perform a password reset instead. See How to reset the password or get the recovery code of your DVR/NVR/NVW

Via HomeSafe View software: 

Go to Control Panel > Group Device Management > Devices: hover over Device > click on Remote Config (wrench icon) > Advanced > Load Default > Check the appropriate box > Save.

Via Swann Security VMS software:

Go to Device Management > Advanced > Load Default > Toggle the appropriate options > Save.
 

Warning: Once you have restored the recorder’s settings to default via software, you are required to set a new password via TV and mouse hardwired to the recorder. If you are unable to login to the Main Menu nor access your recorder via software, you need to do this: How to reset the password or get the recovery code of your DVR/NVR/NVW

Troubleshoot a Boot Failure or Rebooting issue of a Recorder (DVR/NVR/NVW) 

If you your Swann recorder (DVR, NVR, NVW or wireless recorder) is experiencing the below issues, then your unit may have a boot failure problem:

To isolate, consider following the steps below

• Power rating – the common output rating for DVR PSUs is 12V / 2A (2000mA) and 12V / 1.5A – 3.75A for NVRs depending on the model of the recorder. 

 Note: Some of the older DVR PSUs use 12 V / 3A and 48 V / 5 A for NVR. For a list of Power Adapter (PSU) ratings appropriate for your device, please check this What power adapter should I use article.

• Red tag label – most of the power adapter included has red sticker along the power cable to indicate its use (e.g. DVR/NVR or Camera).  

2.Plug to a wall outlet – to eliminate possibility of faulty extension cable or UPS.

 

3.Unplug some cables – if you have an Ethernet cable or cameras already connected, disconnect them for the meantime. Only leave the power plug and monitor connected.

4.Secure connection – ensure that the power plug is connected securely to the recorder and not loose.                            
Note: Some of the older NVR PSUs use a larger Barrel plug.

5.Turn on the recorder – some units may have power switch at the back. Ensure that it is switched ON.                                        

6.For DVR and NVW-800/AllSercure 650 units, if the NO power issue still persists, swap the camera PSU with the recorder to isolate problem. Check this article for the guide.

Note¹: If the recorder remains turned Off, check if the wall outlet where the Power Adapter (PSU) is plugged in has power.

Note²: If the recorder turned On but seeing a black screen, consider checking if your monitor support the correct screen resolution by following this guide – Video Mode Not Supported or Signal Out of Range or No Signal.

Why does my DVR / NVR / camera stop recording motion after a minute? 

DVRs and NVRs are set to record PIR/motion by default. Wireless standalone cameras can only record by PIR/motion. Where the camera is mounted can have an impact on how effective movement is picked up and recorded.

Mounting any camera with thermal and motion sensors in the wrong location and angle can prevent recordings of certain movement. For example:

• Movement in the directions indicated by green arrows are more likely to be detected.

• If the movement is toward and away from the camera at a short distance, the camera sensors may not be able to identify the changes between frames because the differences are subtle.

• If the movement stops, the DVR / NVR will stop recording. This means an intruder could still be standing on the same spot with subtle movements long enough to thwart the PIR/motion sensors.

Please see the fixes specific to your model for working around PIR/motion:

Fix for DVR: Set the already-mounted DVR camera to record continuously

This setting is ideal if you mounted your camera above your front door, and you expect the camera to record regardless of motion.

See How to Set Up 24-hour continuous recording for a Camera (DVR or NVR only)

Fix for NVR with V8 firmware: Set up Analytics for your NVR camera.

Perimeter Intrusion Detection (PID) with PIR can be configured for one NVR camera if you have a V8 recorder and camera.

 A perimeter intrusion region can be used to define specific areas that you want to monitor for motion. For example, a rule can be defined so that your NVR will alert you if one or more objects have entered the boxed region from a particular direction and stayed within the intrusion region for a particular time.

Please see the user manual for your NVR on how to set up PID: User Manual (V8 units – 8580, 8580RN, 8780, 8780RN,)

 .

Fix for any camera, especially WiFi cameras: Reposition the camera or add another camera for a different angle of view.

The ideal position of the camera is 7-8 feet high, pointing downwards at an angle to cover the area where people will be walking across the camera’s path

Production Introduction

The DVR series is a HD surveillance product that designed for security field. It uses an embedded LINUX operating system to ensure stable system performance. It adopts the standard H.265 video compression algorithm and a unique spatial-temporal filtering algorithm to achieve high-quality, low-bitrate synchronous audio and video and 24/7 video recording. With TCP/IP network technologies, it

has powerful network data transmission and remote control capabilities.

The DVR can be used locally or online applied as a part of a safety surveillance network. With professional network video surveillance software, it fully demonstrates its strong networking and telecommunication capabilities.

This DVR can be applied to security measures in various fields and departments such as banking, telecommunications, electric power system, judiciary system, transportation, smart communities, factories, warehouses and water facilities.

.

Unboxing and Initial Setup

When you receive this product, please confirm that it matches the model you ordered and carefully inspect the device for any obvious damage. After opening the casing, check whether the data cable, power cable, and other connections inside the device are firmly connected to the main board.

Please protect the labels attached to the bottom or back panel, which is very important to our after-sales service work. When contacting our company for after-sales service, you will need to provide the model and serial number on the order label.

1.2Gallery

.

Power Indicator

Network Indicator

⑨  ⑩ ⑪

Hard drive

.

.

LAN

.

.

.

.

HD Digital Video Recorder

.

.

.

.

Video Input

.

⑧

Audio Output

⑫ USB2.0

VGA  Ethernet Port

.

.

Audio Input

HDMI

USB2.0 Power Port

.

NOTE: The picture shown is for reference only. Actual appearance is subject to the model you purchased.

How to set up Zosi XVR System

Read More : How to Connect Zosi wifi cameras to nvr

Suggestion: Please test the product before installation to ensure it is functioning properly.

Ⓒ Connect the camera to the DVR via a BNC cable.

Ⓒ Connect the DVR to the monitor via an HDMI or VGA cable.

Ⓒ Connect the DVR to the router via a network cable.

Ⓐ Connect the mouse to the USB port of the DVR.

Ⓒ Power on the DVR by connecting it to a power source.

⑥ The monitor will display the real-time monitoring image from the camera.

.

Via Smartphone

Search “ZOSI” in App Store, or use a browser to scan the QR code below to download and install the App, and follow the on-screen instructions to complete the initial setup.

.

App video operation link

.

Via PC

Download: https://www.zositech.com/app/

.

Basic Operation

After connecting the power supply, the power indicator light will turn on, and the device will start up. At this time, you will hear a “beep” from the buzzer. By default, the system is in multi-screen mode.

Mouse Use:

Left-click:

Double-click a single-channel to make it full screen, and double-click again to return to the multi-channel display.

Click once to open a menu option. Right-click：

Click once to exit the current menu or return to the previous menu option.

.

Left-click  Right-click

.

.

.

.

.

After the device is powered on normally, you need to log in to the system before operating it. The system will provide corresponding functions according to the permissions of the logged-in user.

The default for the device is “admin” and the default password is blank. You can log in to the system directly the first time after powering on.

.

....After entering the preview page, double-click the left mouse button to switch between single or multiple display. On each preview screen, the date, time, and channel name can be displayed, and each screen display the recording and alarm status of the monitoring channel.

.

.

Motion Detection Triggered Motion+PIR Detection Triggered

.

Human-Figure Detection Triggered

PIR Detection Triggered Vehicle Detection Triggered

In preview mode, click the right mouse button to bring up the quick menu, and click the right mouse button again to exit the quick menu.

1.4.1Start Scan

Start Scan refers to the system automatically displaying each live video in sequence according to the order of the devices in channel lists. The jump button is available only when the user selects the channel in [Main Menu]>[Setup]>[Live], and when not all channels can be displayed completely in the current preview mode.

Adjust image settings for all channels: Brightness, Contrast, Saturation and Hue.

Zoomed in digitally up to 4X or 8X of single channel.

Set the audio settings for each channel to enable, disable, or mute audio, and adjust the volume. When [Auto] is selected, the audio will be enabled automatically when switching to the full-screen display.

.

Control the RS485 devices of all channels. Set the address, baud rate, protocol, preset points, patrol routes, tracks, etc. of the RS485 device in [Main Menu] > [Setup]

> [PTZ ]

Note: Due to differences in product design, some devices may not support RS485 interface.

Right-click and select Playback to choose between Video Playback/Quick Playback, Video Playback: Search for the video you want by time or event, then click Play.

Quick Playback: Quickly playback the first 30 minutes of video.

.

.

Play/Pause

Fast  Rewind Forward

Multi-screen display

Previous Record  Next Record

Previous Video: Go to the previous recorded event.

Next Video: Go to the next recorded event.

Fast Forward: The video can be played at different speeds, from 1/4x to 16x. Rewind: The video can be played at 1x, 8x, 16x, and 32x speed for rewind viewing. Display Mode: Both single-screen and multi-screen display modes are available. You can choose the number of screens you want to play simultaneously. Channels without recordings will display a black screen during playback.

.

Main Menu

.

Set functional parameters of the device, including: Basic Configuration, Live Configuration, Recording Configuration, Recording Schedule, Alarm Configuration, Network Configuration, User Management, PTZ Configuration, Advanced Configuration.

.

Basic configuration contains 3 sub-menus: System, Date & Time, and DST

[System Type]: The name of the system displayed on the client

[Model Number]: Used for controlling multiple DVRs with one remote control [Video Format]: Supports PAL and NTSC video format.

[Password Check]: Checking this option means that users must enter a username

and password in the system settings and have the corresponding permissions to perform certain operations.

[Show System Time]: Choose whether to display the time on the scene.

[Max Online Users]: Set the number of network users who can access the device. [Video Output]: Users can select output resolutions 1024×768, 1280×1024, 1920×1080, etc.

[Logout After (Minutes)]: The system automatically logs out after a set time of inactivity. [Startup Wizard]: Whether to display the wizard on startup.

.

Set the date format, time format, time zone, and manually adjust the system time.

NOTE: The system default time zone of the system is GMT. You can select

[Time Synchronization] to correct the time. The network time server can also be set.

Set the start and end times of daylight saving time through the week or date.

.

Live configuration contains 3 sub-menus: Live, Main Monitor, and Video Video Masking.

.

[Camera Name] Click on the camera name, and a software keyboard will pop up. Users can modify the camera name as needed.

Click on the Shift key to switch input method.

[Colour] Users can adjust the brightness, hue, saturation, and contrast of the channel.

.

[Interval] The time interval for switching from one channel to another in sequence during channel rotation.

.

Users can mask certain areas in the scene, max 4 areas.

[Setting] Enter the live view, hold down the left mouse button, drag the mouse to set the blocked area, click [Apply] to save the setting.

Double-click the area that needs to be deleted, and the area will turn black. Right-click

to exit, and then click[Apply] to delete the blocked area.

.

Recording configuration contains 5 sub-menus: Enable, Record Bitrate, Stamp, Recycle Record, and Snap

.

Enable/disable recording and audio functions for a specific channel, or set all channels to default enable.

[Resolution] The recording resolution for each channel [FPS] Selection range: 1-30 (NTSC) 1-25 (PAL)

[Encode] The camera’s encoding type, support VBR and CBR

[Quality] The higher the quality, the clearer the video image. Options include Lowest,

Lower, Low, Medium, Higher, and Highest [Max Bitrate] Range: 256kbps ~ 2048kbps

[Adjust] The video format, including CVBS, AHD, CVI, and TVI

Note：These functions are not optional

[Camera Name] Select whether to display the camera name or not [Time Stamp] Select whether to display time on this channel or not

[Position] Click this button and users can use the mouse to drag the camera name and timestamp to any position on the live screen.

4.Recycle Record

.

When selected, the DVR will automatically overwrite the oldest files and continue recording when the hard disk is full. If not selected, the DVR will stop recording when the hard disk is full and prompt “Insufficient remaining space” on the screen.

Recording schedule contains 6 submenus: Schedule, Motion, Sensor, PIR, Vehicle , and Human.

[Copy] Apply the recording schedule of a certain channel to other channels or all channels.

Select the channel, double-click the left mouse button, and edit the weekly plan.

[Add] Add a recording schedule for a certain day [Delete] Delete the selected schedule

[Copy] Copy the schedule of a specified date to other dates. Double-click the left mouse button to customize the effective recording mode time for each day of the week.

The setting is the same as that of scheduled recording, please refer to scheduled recording setting.

NOTE: The default schedule for motion detection recording is all selected.

The setting is the same as that of scheduled recording, please refer to scheduled recording setting.

NOTE: The default schedule for sensor alarm recording is all selected.

The setting is the same as that of scheduled recording, please refer to scheduled recording setting.

NOTE: The default schedule for PIR detection alarm recording is all selected.

The setting is the same as that of scheduled recording, please refer to scheduled recording setting.

NOTE: The default schedule for vehicle detection recording is all selected.

The setting is the same as that of scheduled recording, please refer to scheduled recording setting.

NOTE: The default schedule for human detection recording is all selected.

The Alarm configuration contains 7 sub-menus: Sensor Alarm, Motion Detection, Video Loss, PIR Detection, Human Detection, Vehicle Detection, and Other Alarms.

.

NOTE: Some products may cancel sensor alarm recording due to product differences.

1-1. Basic Configuration

.

[Enable] Enable the sensor alarm function for the corresponding channel [Type] Select the alarm type: Normally open or Normally closed

[Name] Set the name of the sensor

1-2. Alarm Handling

[Holding Time] Select the alarm delay time, with options of 5s, 10s, 20s, 30s, 60s, 120s, Always

[Trigger] Click to set alarm configuration, trigger recording, PTZ linkage, etc. [Buzzer] When selected, the buzzer will sound when an alarm triggered

[Show Full Screen] When there is an alarm trigger, the alarm will pop up in full- screen display

[To Alarm Out] Select to trigger the alarm output on a specified channel

[Email] When an alarm is triggered, the system will send relevant information to the user’s designated email, such as the alarm event, snapshot, device name, device number, etc.

[Snap] When an alarm is triggered, the system will automatically capture and save images of the selected channel

[To Record] Select the channel to trigger recording

[To PTZ] To set the action type and serial number of the linkage

1-3. Schedule

The schedule settings for sensor alarm are the same as for scheduled recording. For specific setting steps, please refer to 4.2.4 [Recording Schedule] -[Schedule] NOTE: The default schedule for sensor alarm is Select All

Motion Detection contains 2 sub-menus: Motion and Schedule.

2-1. Motion Detection

By analyzing the video image, when the system detects motion signals that reach the preset sensitivity, it will trigger motion detection alarms and activate the linkage function to push the alarm information to the App or email.

[Enable] After selected, the Motion detection function of the corresponding channel is turned on, and it is enabled by default

[Holding Time] Select the alarm delay time for the channel, which can be set to 5s, 10s, 20s, 30s, 60s, 120s, or Always on.

[Push Time] Set the time interval for pushing alarm notification to the mobile App, which can be set to 1min, 2min, 3min, 5min, 8min, or 10min.

[Trigger] The setting is the same as that of sensor alarm, please refer to 4.2.5 Alarm Configuration – Sensor

[Area] In this interface, users can drag the scroll bar to adjust the sensitivity value (1-8), the default value is 6, the smaller the value, the higher the sensitivity. Because the sensitivity is affected by factors such as color and time (day or night), users should adjust the value according to the actual situation.

Click or drag the mouse to select or erase the detection area.

Click the star icon to set the entire field of view as a sensitive area

.

Click the trash icon to clear the current detection area

Click to save settings

.

Click to log out

The sensitivity index ranges from 1 to 8. The default sensitivity is 6. The lower the value, the more sensitive. The higher the value, the less sensitive.

Note: It is best not to have flags,trees or other objects that are easy to flutter in the wind in the grid for motion detection to avoid false alarms.

2-2. Schedule

The setting of the motion detection schedule is the same as that of the scheduled recording. Please refer to 4.2.4 [Recording Schedule]-[Schedule] for specific

setup steps. This function controls the effective time of the motion detection feature. Note: The default schedule for motion detection is to Select All.

This function needs to be used with a camera with PIR (Passive Infrared) capability. After PIR detection is set, the DVR will only record when it detects human life, and push the alarm notifications to the App or mailbox.

.

[Enable] After selected, the PIR detection function of the corresponding channel is turned on, and it is enabled by default

[Holding Time] Select the alarm delay time for the channel. Options: 5s, 10s, 20s, 30s, 60s, 120s, Always

[Push Time] Set the time interval for alarm notifications to be sent to the App.

Options: 1min, 2min, 3min, 5min, 8min, 10min

[Trigger] The setup method is the same as sensor alarm. Please refer to 4.2.5 Alarm Configuration – Sensor

[Schedule] PIR detection schedule setting is the same as Schedule Recording. For detailed instructions, please refer to 4.2.4 Recording Schedule. This feature controls the effective time of PIR detection

By analyzing the video image, the system activates human detection alarm when

it detects human figure. It also triggers linkage functions and sends alarm notifications to the App or mailbox.

.

[Enable] After selected, the human detection function of the corresponding channel is turned on, and it is enabled by default

[Holding Time] Select the alarm delay time for the channel. Options: 5s, 10s, 20s, 30s, 60s, 120s, Always

[Push Time] Choose the time interval for alarm notifications sent to the App. O ptions: 1min, 2min, 3min, 5min, 8min, 10min

[Trigger] The setup process is the same as sensor alarm configuration, please refer to

[Schedule】The schedule settings for human detection alarm are the same as Schedule Recording. For detailed instructions, please refer to 4.2.4 Recording Schedule. This feature controls the effective time of human detection

By analyzing the video image, the system detects vehicle contours and triggers motion detection alarms. It also activates the linkage function to send alarm notifications to the App or mailbox.

[Enable] After selected, the vehicle detection function of the corresponding channel is turned on, and it is enabled by default

[Holding Time] Select the alarm delay time for the channel. Options: 5s, 10s, 20s, 30s, 60s, 120s, and Always

[Push Time] Set the time interval for sending alarm notifications to the App. Options: 1min, 2min, 3min, 5min, 8min, and 10min

[Trigger] The setup process is the same as for sensor alarm configuration. Please refer to 4.2.5 Alarm Configuration – Sensor

[Schedule] The schedule settings for human detection alarm are the same as Schedule Recording. For detailed instructions, please refer to 4.2.4 Recording Schedule. This function controls the effective time of vehicle detection

The handling of video loss alarms is the same as for sensor alarms. For detailed instructions, please refer to 4.2.5 Alarm Configuration – Sensor

[Alarm Types] Including Disk Full, IP Conflict, Disconnect, Disk Shortage Alarm,

Disk lost

[Buzzer] When an alarm occurs, the device emits two long beeps.

[Email] When an alarm is triggered, the system sends relevant information such as the alarm event, snapshots, device name, and device ID to the user’s specified email address.

[To Alarm Out] After selected, and an alarm will be triggered on the specified alarm output.

[Disk Shortage Alarm] When the remaining capacity of the hard disk reaches the set value, an alarm will be triggered.

Network Configuration contains 4 sub-menus: Network, Email, WIFI Setup, DDNS

.

[HTTP Port] 80 by default [Server Port] 5000 by default

[Mobile Port] 5001 by default [Obtain an IP Address Automatically] Enable automatic IP address acquisition

[IP Address] Set the IP address of the device [Subnet Mask] Set the subnet mask of the device

[Gateway] Set the default gateway of the device

[Preferred DNS Server] This address is provided by your internet service provider (ISP). It must be filled in when using mobile monitoring.

[Alternate DNS Server] This address is provided by your internet service provider (ISP).

[PPPOE] Enable this option to establish a network connection using PPPoE. The connected IP address can be checked in[Main Menu]- [Information]- [Network] [User Name] Enter ISP (provided by Internet Service Provider)

[Password] The password set

[Test] Test whether the input IP address or PPPoE information is valid

.

[SMTP Server] Mail server address, which can be an IP address or a domain name

(if it is a domain name, ensure that DNS is correctly configured for proper resolution).

For example: smtp.gmail.com

[Port] Mail server port number, the default port is 465

[SSL Check] Enable SSL (Secure Socket Layer) protocol for secure login [Send Address] The email address of the mail server

[Password] The password for the sender’s email address

[Receive Address] When an alarm occurs, it will be sent to the set email address. Up to 3 recipient email addresses can be set

[Test] Test the current email configuration to check if it is successful.

This function can only be used with an external WiFi module

[WiFi Enable ] Enable WiFi connection after selected

[Search Signal] Search for nearby WiFi signals after enabling WiFi

[Input Password] Select the searched WiFi network and enter the corresponding password

[Configure] Set dynamic IP or static IP

[DDNS Server] Website of the domain name resolution service provider.

Options: www.meibu.com, www.no-ip.com

[User Name] The account used when registering the domain name [Password] The password corresponding to the registered account [Host Domain] The domain name of the domain name resolution server.

Save the settings and exit, you can directly access the device using Internet Explorer (IE)

Manage the user permissions for this device. The default user “admin” is the super administrator and there is no password by default.

NOTE: The maximum length for usernames and passwords is 32 bytes.

.

[Add] : Add a username and set the user’s permissions. Clicking on it will bring up the following interface:

.

NOTE: Some products may cancel the RS485 interface due to product differences.

[Address] The address of the PTZ device

[Baud Rate] The baud rate of the PTZ device. Options: 110, 300, 600, 1200, 2400,

4800, 9600, 19200, 34800, 57600, 115200, 230400, 460800, 921600

[Protocol] The communication protocol of the PTZ device. Options: PELCOP, PELCOD, LILIN, MINKING, NEON, STAR, VIDO, DSCP, VISCA, SAMSUNG, RM110, HY,

N-control [Simulative Cruise] When selected, after adding preset points in the

cruise line configuration, preset point cruising can be achieved regardless of whether the PTZ device supports the cruise line function.

[Preset] Click the [Setting] to open the following window:

Users can adjust the PTZ to the desired position through the button on the tool bar. Click [Save] and the preset point is set. Up to 128 preset points can be set.

[Cruise] Click the [Setting] to open the following window:

[Add] Add a cruise line (up to 8 cruise lines can be added)

[Setup] After selecting a cruise line, click Setup to open the add preset point interface, as shown below:

.

[Track]

[Start Record] Control the PTZ to move up, up-left, down, down-right, left, down-left, right, up-right, or stop recording the PTZ’s movement trajectory.

[Start Track] To execute the recorded trajectory.

NOTE: Each channel can only record one track, which is automatically saved after recording. When calling a track, simply select the channel to start track.

Advanced Setup contains 3 sub-menus: Reset, Import/Export, System Maintenance

.

[Reset] Restore all settings to factory settings

[Import/Export] Export device parameters to a portable storage device or import data from a portable storage device to the device

[System Maintenance] The video recorder defaults to restart automatically every week at 2:00 am on Monday. User can choose to restart Daily, Weekly, Never.

Data search contains Time Search, Event Search, Image

Select a channel and start playing

[Search] Search the video files for the selected channel and time. Click the Play icon to start playback.

NOTE: Dates in the calendar marked with blue squares indicate recorded footage.

[Search] Search the video files for the selected channel and time. Choose the desired time, click Search and select the file, and double-click the mouse to start playback.

[Search] Search for images for the selected channel and time.

[Save] Save the currently displayed image to a portable storage device. [Save All] Save all captured images to a portable storage device.

NOTE:

By configuring the settings, the video files in the device can be backed up to the external storage device.

NOTE: Before backing up files, make sure to install a storage device that can accommodate the backup files.

[Search] Select the files to be backed up based on the time and channel.

[Backup] Select the files from the list, click Backup, and a backup information interface will pop up, as shown in the figure:

[Disk Cleanup] Delete all files in the external storage device.

.

Information contains 5 sub-menus: System, Event, Log, Network, Online Users

.

Display the basic information of the device, including hardware information, software version, Launch Date, and Device ID. Users can scan the QR code to download the mobile App and obtain the mobile port number of the device.

.

.

.

Users can select the event information to query, such as motion detection alarm, human detection alarm, vehicle detection alarm, video loss alarm, PIR detection alarm, etc., based on time, channel, and other criteria.

Search the operation information of the logged-in user according to time, operation type, etc. Please note that formatting the hard drive will clear the log information.

.

Check the relevant parameters of the network settings.

Check the network user information connected to the local DVR.

[Refresh] Re-detect recognizable hard drives.

[Browse] View information of the selected hard drive, including capacity, remaining space, disk status, attributes, total number of pictures that can be stored, and number of pictures that have been saved.

[Format]: Delete data in the selected hard drive, including locked files and pictures.

.

The current user logs out of the system. If the user wants to log in again, they can click on the main menu icon and enter their username and password on the login interface to log back into the device.

.

Click it to initiate a system reboot for maintenance purposes.

.

5 FAQs

.

Q: Does the system support motion detection and image capture?

A: It captures images automatically when people, cars, are detected or when there is a change in detected images. Users can also manually capture images using our ZOSI Smart APP.

.

Q: Why can’t my device connect to the Internet?

A: Please check

.

Q: Why can’t I search for video files?

A: Please check

.

Q: Why can’t some channels be displayed?

A: Please check

Getting Started with ClareVision – WiFi Cameras

Overview

The following article provide the following information:

• Setting up your WiFi camera
• Configuring motion, image, and event settings
• Adding the camera to the ClareVision App

 Step One: Connect the Camera to Your LAN

To add the camera to a WiFi network, first connect the camera to the Local Area Network (LAN) through a router, modem, or network switch.

1. Using an Ethernet cable, connect the WiFi camera to a router, switch, or modem that is on the network you would like to configure WiFi for.
2. Power up the camera using the included power supply (Bullet and Turret cameras)
3. Once the camera has connected to the network, use the IP Search Tool to discover the camera IP Address.

IMPROTANT: The WiFi Turret (CLR-V100-4T36WF-W) and Bullet (CLR-V100-4B36WF-W) do not support POE. You must connect the camera to the network using an Ethernet cable and power the camera with the included power supply.

ClareVision Cameras Setup Guide

Read Next :

• ClareVision Camera and NVR Setup Documentation
• ClareVision Camera and NVR Firmware
• Hikvision AX PRO Configuration Full Setup – Video

Step Two: Discover the Camera

All Clarevision cameras ship with DHCP turned on. DHCP simply means the router will assign an IP address to the camera when it boots up using the LAN IP address scheme. Example:

• Router IP Address: 192.168.1.1 (typical)
• IP address range that may be available: 192.168.1.2 through 192.168.1.255
• Router will assign an address like this: 192.168.1.x, where x can be any number between 2 and 255.

1. Install and launch the IP Search Tool and select “Search”
   
2. Open a Chrome or Edge browser and input the WiFi camera’s IP address into the URL field on your web browser
   
3. Input the default username and password.

IMPORTANT:

The default username is: admin

The default password is the first six characters of the UUID. The UUID can be found on the camera label or the quick start guide. If those are not available or inconvenient, you can use one of these methods found HERE to discover the UUID.

Tip:

When you login, you will be asked to change the password and answer security questions. Make sure you configure the security questions and store them. If you do not and you lose the password you will have to go to the camera and physically reset it.

Step Three: Update the Camera to the Latest Firmware Release

Clare Controls releases camera firmware with new features about once every four months. Chances are, your camera will need to be updated when you take out of the box. The camera firmware database is located here.

1. Log into the camera and go to the Configuration > System Configuration > Device Information to review the firmware version.
2. Cameras with version numbers where the last 3 digits are lower than 30.x will require you to to to the maintenance tab and upload the firmware to the camera you retrieved from our website. Cameras with version numbers greater than 30.x will have online update services directly from the web console as shown below:
   
3. Simply click on the “Check” button and the camera will check our servers for an update and if available ask you if you want the camera updated. Updates take about 3 minutes.

Step Four: Configure the WiFi Settings

Make sure the camera is connected to a router, switch, or modem before proceeding with the next steps.

1. Select WiFi Configuration on the home page or navigate to Configuration > Network > Advanced Setup > WiFi.
   
2. Tap Scan to discover available WiFi 2.4GHz WiFi networks.
   
3. Select the desired WiFi network you would like to connect the camera to.
   
4. All fields should automatically populate when you select a WiFi network. Input the WiFi password into the Key field.
   
5. Check DHCP if you would like the network to assign the network parameters automatically. Leave this field unchecked if you would like to manually configure settings such as IP Address, Netmask, Default Gateway, and Preferred DNS Server.
   
6. Tap Save to complete and save your configuration.
   

Step Five: Configure the Video Stream

Video stream: the IP Camera streams one or more streams to mobile apps, NVR’s and integrated systems. The video settings control the configuration of those streams. Image settings control the parameters that affect the way the image is captured.

The video stream is configured through two basic menu items: Video and Image.

ClareVision Cameras are configured for best optimal settings out of the box. You will most likely not need to adjust settings unless specific settings require it. You can adjust image settings under Configuration > Image > Image Adjustment.

Tip:

We have configured the encoder for H.264 encoding on all streams. You may want to encode the main stream (stream 1) using H.265 as it requires about 50% of the network bandwidth and 50% of the HDD storage space vs. H.264. We set the main stream to H.264 because certain control systems and mobile phones do not decode H.265. You can tune this to your application.

Step Six: Configure Events

Events are the heart of the intelligent camera. All configuration is found under the Configuration Tab/Events. Events are broken into two categories: motion and smart.

The standard configuration for events from the factory is as follows:

• Motion detection: enabled, full field (entire field of view
• Motion sensitivity: 5 (medium) – will detect a human about xx feet for Value Series and yy for Performance Series
• Motion record calendar: 7×24
• Motion event arm calendar: 7×24
• Motion record: main stream (except V100 4mp, which is set to sub-stream)
• Smart event: disabled

1.   Determine whether you want to use Smart Events or Motion Events:

• 1. Smart Events: detects human objects only and is quite accurate. Use this when other objects, like vehicles are not required. Smart events include intrusion zone, line cross detection, loitering and people gathering. False positives with Smart Events are very rare.
  2. Motion Events: detects motion of any kind (human, package, vehicle, animal)

Tip:

When using the camera stand alone, do not set up more than one event type (motion, smart). It is the event arming action that sends the event to the push notification server and the recording engine inside the camera. The camera will only record ONE event type (motion OR smart). If you arm both, you will get both event types sent to the user as push notifications but only one will record. The user could then receive a push notification for which there is no recording.

2.   Go HERE for details on setting up motion events

3.   Go HERE for tips on setting up smart events.

Step Seven: Configure Storage

While you may store events locally to the SD Card and to an NVR at the same time, in this example, we will discuss the SD Card storage only.

1.   Go to Configuration > Storage > Recording Schedule.
Set the storage schedule and event type you wish to store.

Tip:

It is the COLOR of the bars that indicate the events that are going to be recorded NOT the drop down box above.

Caution:

Always set the recording schedule to 7×24 and use the EVENT ARMING calendar to control when something will actually be detected, recorded and a push notification sent.

2.   Click on storage management to see the status of the SD Card. If it needs to be formatted it will indicate that, simply press the FORMAT button. The SD Card overwrites by default.

3.   Advanced properties allows you to control the pre-record and post record interval. When an event is detected in the example below, the camera will store the 5 seconds leading up to the event and 10 seconds after the event ends.

Step Eight: Add the Camera to the Mobile App

Now that you have set up your camera, it is time to add it to the ClareVision app. It is quite simple.

1. Launch the ClareVision App
   
2. Tap the ‘Plus’ sign and you will be presented with the three options shown below.
   
3. If you tap device is on the network, the app will scan the LAN for any ClareVision cameras and present them in the following screen. Device is on a remote network provides you with the option of scanning a QR code for a camera on a remote network.
   The system will locate it anywhere in the world and provide you with a login screen to add the remote camera.In our example, we tapped on “Device is on the local network” and two devices were found.
   
4. Tapping on a device brings you to a login screen where you may enter the credentials
   
5. And DONE!
   

You have just successfully installed, configured and enabled a stand alone ClareVision camera on the ClareVision mobile app. Any push notifications and events that are configured  will automatically propagate to your customer’s mobile device.

Getting Started with ClareVision – Standalone Camera Setup

The following is a getting started guide to for ClareVision cameras…it is the basics.

Overview

The following article provide the following information:

• The basic functions of an NVR
• The basic functions of an IP camera
• Best practices for setting up a stand alone camera

NVR’s

The NVR provides two basic functions: it network attaches the cameras and provides storage. In fact, the NVR does very little else.

• Network services: the NVR provides a central place to access IP cameras. You can attach IP cameras directly to the ports of the NVR or leave the cameras on the LAN. The NVR can be configured attach to those cameras for purposes of centralized access and recording. Centralized access can be viewing on the web console or providing access to integrated solutions such as the ClareOne Panel or a home automation system such as Control4
• Recording services: the NVR also provides recording services. You may record full time video or motion events, smart events, alarm events or any combination.

Note:

The NVR does NOT create events. The camera creates all events and the NVR simply records them. Why are the settings in the NVR for motion events, smart events and alarm events? Convenience. The NVR is simply configuring the camera so you do not have to log into each camera to configure an event. Check it out: configure an event in the NVR and log into the camera. You will see the exact settings you configured in the NVR in the camera settings web console.

Tip:

Since many ClareVision cameras come with SD cards installed, when should I use an NVR?

• Full time recording: the SD Cards are not useful for full time recording. A 4MP camera will overwrite in less than one day on full time record
• Storing multiple event types: the camera will store motion OR smart events OR alarm events. Use the NVR if you need multiple event types stored
• Camera count: if you are getting above 2 to 3 cameras, it is probably time for an NVR. Centralized access and storage flexibility will be very useful in those use cases.

IP Cameras

The IP camera is where almost everything interesting happens. The IP camera collects, analyzes and forwards video streams and snapshots to one or more clients. The camera can provide service to a mobile app, the NVR and an integrated control system simultaneously. It also provides multiple streams of video in different resolutions and frame rates so the client device can select the stream it can process. The following provides a high level reference highlighting the differences between the Value Series and Performance Series ClareVision IP cameras:

Feature	Value Series	Performance Series
Motion
Advanced Motion
Smart Events
Streams	2	3
Starlight
Available Varifocal
Fixed Lens	3.6mm	2.8mm
Color at Night		Coming Soon

In summary, the camera is where everything interesting happens. The NVR simply provides convenient access and storage.

Next, let’s set up a camera, stand alone and attach the ClareVision mobile app….

Setup a Stand-Alone ClareVision Camera, Connect to ClareVision Mobile

What You Need

Learning by doing is far better than reading articles and watching videos. Before you proceed, you will need the following:

• ClareVision IP camera: we will use a Performance series camera in our exercises.
• A computer with internet access
• A mobile phone with ClareVision installed. (Do not install ClareVision Plus – that is our legacy app)
• A PoE switch or a standard ethernet switch with a stand alone PoE injector.

Step One: Install the Camera on Your LAN

The following image shows the connection scheme for a PoE switch connected to a camera.

Tip:

If you are using a PoE switch, most switches have two LED’s on them: power and link. The power LED indicates the switch is powering the camera and the link light indicates data is being transmitted to the camera. Both of these LED’s should be lit. The link light will often flash.

If your link light is flashing on the ethernet switch and the power LED is lit – you have powered up the camera. Success!

Step Two: Find the Camera on Your LAN

All Clarevision cameras ship with DHCP turned on. DHCP simply means the router will assign an IP address to the camera when it boots up using the LAN IP address scheme. Example:

• Router IP Address: 192.168.1.1 (typical)
• IP address range that may be available: 192.168.1.2 through 192.168.1.255
• Router will assign an address like this: 192.168.1.x, where x can be any number between 2 and 255.

Tip:

While you can simply launch the mobile app, discover the camera and configure the password change, we DO NOT recommend this as a best practice. Many configuration parameters and all Smart Events are configurable from the web console only. Take the time to tune the camera to the installation, it will pay dividends in customer satisfaction!

How do you find your camera so you can login and configure? Download the IP search tool here.

Install and Launch IP Search and select “Search”

All IP cameras and NVR’s regardless of their IP address will appear in the results window.

Next launch a web browser (Chrome or Edge) and enter the IP address of the camera you just installed.

The default USERID is: admin (not case sensitive)

The default password is the first six characters of the UUID. The UUID can be found on the camera label or the quick start guide. If those are not available or inconvenient, you can use one of these methods found HERE to discover the UUID.

Tip:

When you login, you will be asked to change the password and answer security questions. Make sure you configure the security questions and store them. If you do not and you lose the password you will have to go to the camera and physically reset it.

Step Three: Update the Camera to the Latest Firmware Release

Clare Controls releases camera firmware with new features about once every four months. Chances are, your camera will need to be updated when you take out of the box. The camera firmware database is located here.

Log into the camera and go to the Configuration tab and click on System Configuration/Device Information to review the firmware version.

Cameras with version numbers where the last 3 digits are lower than 30.x will require you to to to the maintenance tab and upload the firmware to the camera you retrieved from our website. Cameras with version numbers greater than 30.x will have online update services directly from the web console as shown below:

Simply click on the “Check” button and the camera will check our servers for an update and if available ask you if you want the camera updated. Updates take about 3 minutes.

Step Four: Configure the Video Stream

Video stream: the IP Camera streams one or more streams to mobile apps, NVR’s and integrated systems. The video settings control the configuration of those streams. Image settings control the parameters that affect the way the image is captured.

The video stream is configured through two basic menu items: Video and Image.

Here’s the good news. You likely will not have to adjust any video settings. We have configured those to allow for seamless integration into the ClareOne system and third party control systems.

Tip:

We have configured the encoder for H.264 encoding on all streams. You may want to encode the main stream (stream 1) using H.265 as it requires about 50% of the network bandwidth and 50% of the HDD storage space vs. H.264. We set the main stream to H.264 because certain control systems and mobile phones do not decode H.265. You can tune this to your application.

You likely will not touch any image settings except image rotation. Clare put a lot of time into optimizing all settings. We believe you will agree when you see the image quality!

Here is the image rotation setting:

That’s it! You are done with video and image settings!

Step Five: Configure Events

Events are the heart of the intelligent camera. All configuration is found under the Configuration Tab/Events. Events are broken into two categories: motion and smart. (V200 only).

The standard configuration for events from the factory is as follows:

• Motion detection: enabled, full field (entire field of view)
• Motion sensitivity: 5 (medium) – will detect a human about xx feet for Value Series and yy for Performance Series
• Motion record calendar: 7×24
• Motion event arm calendar: 7×24
• Motion record: main stream (except V100 4mp, which is set to sub-stream)
• Smart event: disabled

1.   Determine whether you want to use Smart Events or Motion Events:

• 1. Smart Events: detects human objects only and is quite accurate. Use this when other objects, like vehicles are not required. Smart events include intrusion zone, line cross detection, loitering and people gathering. False positives with Smart Events are very rare.
  2. Motion Events: detects motion of any kind (human, package, vehicle, animal)

Tip:

When using the camera stand alone, do not set up more than one event type (motion, smart). It is the event arming action that sends the event to the push notification server and the recording engine inside the camera. The camera will only record ONE event type (motion OR smart). If you arm both, you will get both event types sent to the user as push notifications but only one will record. The user could then receive a push notification for which there is no recording.

2.   Go HERE for details on setting up motion events

3.   Go HERE for tips on setting up smart events.

Step Six: Configure Storage

While you may store events locally to the SD Card and to an NVR at the same time, in this example, we will discuss the SD Card storage only.

1.   Go to Configuration/Storage/Recording Schedule

Set the storage schedule and event type you wish to store

Tip:

It is the COLOR of the bars that indicate the events that are going to be recorded NOT the drop down box above.

Caution:

Always set the recording schedule to 7×24 and use the EVENT ARMING calendar to control when something will actually be detected, recorded and a push notification sent.

2.   Click on storage management to see the status of the SD Card. If it needs to be formatted it will indicate that, simply press the FORMAT button. The SD Card overwrites by default.

3.   Advanced properties allows you to control the pre-record and post record interval. When an event is detected in the example below, the camera will store the 5 seconds leading up to the event and 10 seconds after the event ends.

You have just professionally configured a ClareVision camera! 

Step Six: Add the Camera to the Mobile App

Now that you have set up your camera, it is time to add it to the ClareVision app. It is quite simple.

Launch the ClareVision App

Tap the ‘Plus’ sign and you will be presented with the three options shown below.

If you tap device is on the network, the app will scan the LAN for any ClareVision cameras and present them in the following screen. Device is on a remote network provides you with the option of scanning a QR code for a camera on a remote network. The system will locate it anywhere in the world and provide you with a login screen to add the remote camera.

In our example, we tapped on “Device is on the local network” and two devices were found.

Tapping on a device brings you to a login screen where you may enter the credentials

And DONE!

You have just successfully installed, configured and enabled a stand alone ClareVision camera on the ClareVision mobile app. Push notifications and events as configured will automatically propagate to your customer’s mobile device!

Configuring Motion Events in a ClareVision Camera

The following a is a quick guide to setting up motion events in a ClareVision camera.

Motion events are quite simple to set up.

Step One: Go to the configuration tab, Events/Motion Events

Step Two: Set the motion area.

Set the motion area by dragging your mouse over the grid pattern. The area without grid coverage will not be analyzed for motion. In the image above, the pool surface should be removed from the motion detection area as the spa spillway will create rippling on the surface of the pool which will result in false triggers.

You should also watch for nearby bushes/trees/foliage that may move when the wind is blowing. The motion algorithm in the ClareVision cameras was overhauled in the fall release. As a result, insects, birds and foliage in the distance will rarely cause false triggers.

Step Three: Tune the Sensitivity.

As you lower the sensitivity, the likelihood of false triggers will be reduced, but the camera’s detection zone for a human size object will also be reduced. See the table below:

Note:  the above table is for human sized objects and the fixed lens cameras.  Cars, for example, will trigger motion events at greater distances and zoom adjustment on a varifocal camera will allow you to detect human objects at greater distances than those listed above.

Step Four: Set the arming schedule.

The arming schedule is what controls when the camera will process motion events. When a motion event is created, it is automatically sent to the push server (stand alone) or sent to the NVR for processing. Additionally, when a motion event is created, it will be sent to the recording engine in the camera and if configured to record, it will be recorded to the SD Card.

The arming schedule default is 7×24.

Caution:

It is easy to get confused by the multiple calendars that are in a camera or NVR. The event arming schedule shown above is the primary calendar you need to manage.

If your installation requires events to be disabled during certain hours of the day or days of the week ALWAYS do the following:

1. Use the event arming schedule to control when the event will be analyzed and propagated

2. Leave the record schedule on 7×24 record. DO NOT try to match the two calendars – use the event arm schedule to control when events happen NOT the record schedule.

Step Five: TEST

This is an easy thing to skip – make sure you test your setup! Watch the area of interest and make sure objects moving in that area are captured (go to the Playback tab to view). Equally as important, make sure you have filtered out areas that are prone to create false triggers: nearby foliage, pools, sidewalks, roadways etc.

Configuring Smart Events in Standalone Performance Series ClareVision Cameras

The following a is a quick guide to setting up Smart Events in standalone Performance Series ClareVision cameras.

Step One: Go to the configuration tab, Events/Smart Events

Make sure you ENABLE Intelligent Detection such as Humanoid detection. You must have Intelligent detection enabled to use any of the presents below.

There are four smart event types:

• Intrusion: intrusion events are boundary intrusion events. Intrusion detection can be configured with up to four zones.
• Line Crossing: line crossing detection can be configured as a unidirectional crossing or bidirectional crossing.
• Loiter Detection: detects when people stay in a region of interest for an certain time period.
• People Gather: detects when the density of people in an area exceeds a threshold.

All of these events are human based. Vehicle detection is being worked on at this time and will be in a future firmware release.

Although there are four smart event types, they all are stored and propagated to the mobile app as ‘Smart Events’. There is meta-data that indicates the smart event type in the event log in the mobile app and in the push notification. You can configure more than one smart event type.

Step Two: Intrusion

Intrusion is the most commonly used smart event type. It is similar to motion detection in concept but is restricted to human detection. False positives are very rare with smart intrusion events.

First – check the ‘enable’ box. Without the event enabled, nothing will happen.

Click “Draw Area”. You can draw a quadrilateral anywhere on the screen. If the region of interest does not fit nicely within a quadrilateral, you can draw a second quadrilateral by using the “Warn Region” dropdown box. You can have up to four regions of interest.

Any intrusion in any of the up to four regions will trigger the intrusion event.

The “Time Threshold” is the duration the person needs to be in the region for the event to trigger. The time is in seconds.

“Sensitivity” is the human detection sensitivity setting. A higher number will detect humans further away from the camera, but may be prone to more false detections. Lower sensitivity has the reverse effect.

Step 3: Line Crossing

Line crossing is used when you want to know when someone has entered or exited a specific threshold or doorway as opposed to simply knowing if someone is in a region

In this example, the camera will trigger when someone walks from the house to the pool, but not the reverse.

Step Four: set the arming schedule.

The arming schedule is what controls when the camera will process smart events. Each smart event type can have its own arming schedule. When a smart event is created, it is automatically sent to the push server (stand alone) or sent to the NVR for processing. Additionally, when a motion event is created, it will be sent to the recording engine in the camera and if configured to record, it will be recorded to the SD Card.

The arming schedule default is 7×24.

Caution:

It is easy to get confused by the multiple calendars that are in a camera or NVR. The event arming schedule shown above is the primary calendar you need to manage.

If your installation requires events to be disabled during certain hours of the day or days of the week ALWAYS do the following:

1. Use the event arming schedule to control when the event will be analyzed and propagated

2. Leave the record schedule on 7×24 record. DO NOT try to match the two calendars – use the event arm schedule to control when events happen NOT the record schedule.

Step Five: TEST

This is an easy thing to skip – make sure you test your Smart event! Watch the area of interest and make sure objects moving in that area are captured (go to the Playback tab to view). You can use the sensitivity setting to adjust the distance the camera will pick up a human event.

Where to find the default password for ClareVision Cameras and NVRs

The default password for all ClareVision cameras and NVRs is the FIRST SIX CHARACTERS of the UUID which can be found on:

• Back of the installation manual
• Label on the camera box
• Label on the back of the physical camera

IMPORTANT NOTE: The password is case sensitive.

You will be prompted to change the password when initially setting up the camera in both the camera web console and ClareVision App.

How to use the SD Card in a ClareVision Camera as Backup to Your NVR.

Want to be sure events are available for your customer in the event of an NVR failure or NVR theft? Use the SD Card on the Camera as a backup.

Overview

The SD Card in the camera (included in all 4MP and 2MP fixed lens ClareVision cameras) is a useful tool when you want to install one or two cameras and keep the job low cost and simple.  The user experience is similar to an NVR with event playback and the storage is reliable.  What about an installation with an NVR?  Use the SD Card as a back up for events.

NVR Setup

The NVR setup is not changed in any way to accomplish the goal of using the SD Card as a backup for events.  Read this article to learn more about setting up a ClareVision NVR.  Once you have completed setting up the NVR to record motion or smart events, you are ready to configure the camera to record events.

Camera Setup

By setting up the NVR to record events in the motion or smart event setup, you have already configured the camera’s motion or smart events.

Here is the NVR with smart events configured using Intrusion Detection

By configuring the Intrusion Detection in the NVR as above, the camera Intrusion Detection is configured as shown below (the NVR simply ‘programs’ the camera)

The recording schedule you setup in the NVR is the recording schedule for the NVR, not the camera.  To use the camera SD card as a backup to the NVR for events, we need to set the recording schedule up in the camera.

The image below shows the camera recording schedule.  It is set to record all Smart Events, 7 days/week, 24 hours/day.

Save the schedule and you are done.  The camera will both, send the event to the NVR for storage and record the event locally.

Points to Remember:

1. You cannot access SD Card events from the mobile app when it is behind an NVR (i.e. on the PoE ports).  If the camera is connected to the NVR on the general network, you can add the camera to the mobile app as a separate device and access the events directly from the camera tile on the home page.  We only recommend doing this for troubleshooting and access to SD Card events as it will get confusing for your customer if the camera is visible on the home page and the NVR screen.
2. You can only back up ONE event type: motion OR smart and not both.  The camera will only record a single event type.
3. Accessing the stored events on the camera itself involves the following steps assuming the camera is on an NVR PoE port:
   1. Log into the NVR
   2. Go to Configuration/Channel/Camera
      
   3. Access the virtual host by clicking on the IP address of the camera you wish to view and login to the camera.
   4. Once logged into the camera, go to the Playback tab and view the stored events.

Conclusion

Clare Controls includes SD cards on many of its cameras standard.  You can use the camera stand-alone OR use the SD card as a backup to the NVR.  With a few minutes of work, you can assure you customer their data is safe!

Where do I find the UUID on an Installed Camera

If you camera is already installed and you need the UUID for setup – follow these instructions.

Let’s say you are being called out to configure cameras that have already been installed and no one wrote down the UUID you need for the password. There are two simple methods for retrieving the UUID without getting a ladder out and going to each camera

Method 1: Cameras are Stand-Alone on the LAN

Launch the ClareVision App

Tap the ‘Plus’ sign and you will be presented with the three options shown below.

If you tap device is on the network, the app will scan the LAN for any ClareVision cameras and present them in the following screen.

There you have all ClareVision cameras attached to the LAN with the UUID (needed for the default password) and the IP address of the camera. You can now log into the camera your browser using the IP address and the first 6 digits of the UUID as the default password.

Method 2: Cameras are on the NVR

This is even easier. Log into the NVR, change the password as requested. When you do so, all attached cameras will have their UserID and password set automatically to the UserID and password of the NVR.

If you want to change the UserID and password of the NVR, you do so under the Configuration tab System/Users

Check the “Sync Camera Password” box and password will change on all attached ClareVision cameras whether on the PoE ports or the general LAN when the NVR password change is accepted.

Note:

The camera password sync feature works with ClareVision cameras only. It does not work with attached ONVIF cameras (e.g. Luma, Hikvision etc)

How to set up Event Snapshots using cloud storage for ClareVision cameras and NVRs

Event snapshots can be configured for ClareVision cameras and NVRs that are backed up on a Google Drive account. Whenever an event is detected such as smart event, motion, or other alarm trigger, a snapshot image will be created of the scene and uploaded to your Cloud storage device. This guide will help you set up Google Drive for use as a backup with event snapshots.

Google Drive:

1. Utilize IP Search Tool to find your camera on the network and notate the IP address.
2. Open Edge or Chrome and navigate to the IP address for your camera.
   • (ex. http://10.100.0.100)
3. Log into the camera using camera’s credentials that you created at setup.
4. Click on the “Configuration” tab, then click on “Storage” in the navigation tree on the left side of the page.
   
5. Click on the “Storage Management” sub-menu and switch to the “Cloud Storage” tab.
6. From the drop-down menu in a camera, select “Google” or the “Enable” checkbox and “Google” checkbox on an NVR. The web console will auto-fill with the Web setup URL and Authentication Code. You will need this code to complete setup.
   
7. Copy and past the web browser URL link (https://www.google.com/device) into a new browser tab.
8. Copy and paste the Authentication code into the Google devices login window and tap “Next“.
   
9. Log in or select your Google Drive account.
10. Tap “Allow” to give the NVR rights to your Google Drive.
    
11. After the success screen displays, switch back to the camera web console and tap “Bind“.
    
12. The camera is now be connected with your Google Drive account. You must enable Cloud Snapshot Backup individually for each camera including those connected to an NVR by opening the camera through the Virtual Host. Configure the Cloud Linkage method in your motion detection settings:
13. Open the “Events” window in the sub-menu and select “Ordinary Events or Smart Events“, depending on the need.
14. Under your selected event type, select “Linkage Method” in the sub-menu.
15. Add a check box next to “Upload Via Cloud” to have event snapshots loaded into the cloud.
    
16. Tab “Save“.
17. The next time motion is detected, a folder will be created in your Google Drive that will capture and upload snapshots of motion events.

Where to find the default password for ClareVision Cameras and NVRs

• Back of the installation manual
• Label on the camera box
• Label on the back of the physical camera

How to add an NVR in FusionPro

Users now have the ability to add NVRs to their account, as well as adding cameras to the NVR.

IMPORTANT NOTE: We recommend that the cameras are first configured individually and then added to the ClareVision app before adding them through FusionPro. This ensures that the password is reset on the camera. If attempting to add the camera in FusionPro with a 6-character password or less (which is the default) it will fail.

To add a new NVR:

1. Access the desired FusionPro account and click to add a new device.
   Desired Account > Devices tab > Add Devices > Cameras > (Select an NVR type)
   
2. Enter all the required info (IP address, username, password) and select the desired channels.
   
3. Click Create Device.

   Devices are created until an error occurs. If an error occurs, device creation will stop and it notes which channels were successfully added. If the user accidentally checked a channel that is not in use, simply uncheck the problematic channel and click Create Device.

   If the user returns to the add device screen and enters the IP of an existing NVR, the existing channels are displayed.

To add a camera to an existing NVR:

1. Follow the steps above for adding a camera.
   – or –
   Edit an existing camera on the NVR.
2. Scroll down to the NVR Cameras table.
3. Click on an unconfigured row.
   
4. Re-enter the username and password and click Save.
   You can also navigate to any NVR channel device from another NVR channel device by clicking Edit in the NVR Cameras table of a configured channel.

To delete an NVR camera:

1. Go to the Devices tab.
2. Select the checkbox for the desired camera, and then select Delete in the Select an Action drop-down.

Read Next : ClareVision Camera and NVR Firmware

ClareVision FAQ

Cameras, NVRs, and ClareVision App Frequently Asked Questions

CAMERAS

Does Clare plan to release any WiFi cameras?

Yes, they are available as of Q1 2022.  Check them out in the SnapOne store.

Are your cameras NDAA compliant?

Yes, the ClareVision product line is compliant with NDAA regulations.

Are your cameras ETL listed?

Yes, our cameras are ETL/ETL-C listed.

Are your cameras ONVIF Compliant?

Yes, ClareVision cameras are compliant with Profile S and T.

What is the difference between the Value Series, Performance series, and Color at Night?

The Value Series is intended to service accounts with basic surveillance requirements without sacrificing video quality and reliability. You will find the value series in the same high quality IP67 housings as the performance series and the video performance to be outstanding. The Performance Series adds:

• True Wide Dynamic Range (120db)
• Smart Events (Intrusion, line crossing, loitering, people gathering)
• Sony® Starvis image sensors for improved low light performance
• Higher power on-board processor which will allow new smart event processing features in the future

Color at Night cameras feature everything included in Performance Series cameras with the added benefit of a warm white LED light that can illuminate the scene and produce vivid color in night time settings. This allows for important details to be captured that are normally lost with IR night vision cameras such as vehicle colors, facial features, licence plates, etc.

Do all cameras come with SD Cards?

No. The 2MP and 4MP Value Series and 4MP Performance series come with pre-installed SD cards. The 8MP and varifocal Performance Series cameras do not come with SD cards. SD Cards are available for purchase should you need to add or upgrade capacity.

What can I store on the SD Card?

The SD card is intended for event storage, but you can configure normal (full time) record as well. You can only record ONE event type to record on the SD card: basic motion, smart events, OR normal record. NVR’s do not have this restriction.

What is the lapse time for the SD Card, and will it loop back?

The SD card in the 2MP is 16GB and 32GB in the 4MP cameras (both Performance and Value). For the 4MP cameras, if the defaults in the camera are left unchanged, you will be able to record approximately 18 hours of fulltime video or just over 1,000 on minute events. If the compression is changed to H.265, you will be able to store about 36 hours of fulltime video or 2,000 one-minute events. The 2mp will last slightly longer.  The default setting for the cameras is loop-back enabled, meaning the camera will overwrite the oldest stored video once it runs out of storage space (FIFO).

Can I use the SD card as a ‘backup’ to the NVR by storing events locally and fulltime record and events on the NVR?

Yes. Camera recording can be set up independent from NVR recording.

What wall brackets and junction boxes are compatible with ClareVision cameras?

You can see a complete list of all ClareVision wall brackets and junction boxes, as well as cameras they are compatible with HERE.

Why is my camera recording full time when it’s configured for motion only?

All 4M V100 cameras (part number CLR-V100-4X36X) record full time and tag the motion events in the time line when motion occurs.

What are some of the important default settings I should know?

ClareVision have been configured for best out-of-box settings and experience. The default settings should be ‘ready to go’ for 90% of applications reducing training and field installation errors. The important settings are as follows:

• FPS: 15
• Compression: H.264
• IR: automatic
• WDR (when available): off
• Time: NTP time server on, refresh every 10 min, Eastern Time Zone, DST on
• Motion Record: enabled, 7 days, 24 hours a day
• Motion Events: enabled, 7 days, 24 hours a day
• Smart Events: disabled

Do any of the ClareVision cameras include built in microphones or I/O connections?

Yes, please refer to the following article for a complete list. CLICK HERE.

What is the password process and what if I lose it?

The default password is the first six characters of the UUID. The first time you log into the camera from the web console you will be prompted to change the password. You will be prompted with setting up security questions and offered to download an encryption key for password recovery. Either those questions or the encryption key can be used to reset the password. If you do not take these steps and store this information, the only way to recover the camera is a physical factory restore. (See manual). When that is done, the camera will restore to factory default settings allowing you to enter the first fix digits of the UUID as the password.

I use Hikvision, is there an ‘activation key’?

There is no ‘activation key’ for the ClareVision cameras.

What is the difference between the calendar in the storage settings menu and the calendar in the events menu?

The events menu is essentially an ‘arming’ feature. In order to propagate events to the mobile app, linked services (e.g., relays, FTP, email), or to record you need to arm an event type. The configuration of the event along with the event calendar control the CONFIGURATION of the event (e.g., H/M/L sensitivity, motion area) and the time of day / day of week the camera will trigger on an event. The event ‘arming’ controls when and how an event happens, and no other system or service will receive those events without this feature set up. The record calendar simply controls when events (or normal video) will be recorded provided they are armed at that time.

What do you recommend I do for setup with the two calendars?

The flexibility of these calendars is virtually endless, but in a majority of use cases we recommend the following:

• Set the record calendar to 7×24 record for the event type you wish to record.
• Use the event calendar to control when an event will be triggered which will in turn control when it is recorded.

How does all this relate to the mobile app and the user experience?

The event ‘arming’ controls the propagation of the event to the mobile app via push notifications. This is INDEPENDENT from whether the event is recorded. The recording under storage management controls what ends up on the SD Card which is where the mobile app goes for the event history. We cannot stress this enough: keep the storage settings calendar set to 7×24 and use the event calendar to control when a motion event (example) is triggered (push notification) and stored to the SD card (event lookup in the mobile app). If you do not do that you risk having a push notification sent to the user with no recording to view when they go to the event log.

Why then are the event arming schedules and record schedules separate?

There are plenty of use cases where you may want to record on a different schedule than the arming schedule. This can be common in more complex installs where the linkage feature for event arming is used. (see manual for more information).

What are Smart Events and how do they work?

Smart Events are events that require the presence of a human to trigger. They are also specific in nature: intrusion zone, line crossing, loiter, people gather.

What is the difference between a Motion Event and a Smart Intrusion Event?

You can essentially use the Smart Intrusion event to reduce false triggers if the primary interest is detecting the presence of a person. Motion events use a typical grid pattern and sensitivity settings to control which areas of the field of view are analyzed for motion and at what sensitivity. A car, dog, or any real motion in the included field of view will trigger an event. A smart intrusion event is set up by drawing a box around the area of interest, setting the sensitivity and detection type. Once configured, a human will have to enter the intrusion zone for the event to trigger.

How do I power the cameras?

Nearly all ClareVision cameras (excluding CLR-V100-4B36WF-W and CLR-V100-4T36WF-W) are PoE AF and do not require PoE+ (PoE AT). You can also power the cameras with a 12V DC 1amp power supply (not included).

Do the cameras support remote access?

The cameras support remote access via the mobile app via Clare’s free P2P service. Additionally, you may use Dynamic DNS or configure the local router to enable remote web access.

How do I predict the storage and bandwidth required for an installation?

You may use the Clare bandwidth and storage calculator located HERE to calculate your bandwidth and storage requirements for a project.

How do the cameras receive firmware updates?

All Clare cameras can be updated via the ClareVision OTA server using the mobile app. This is the easiest way to update the cameras. Update notices happen two different ways:

• Upon adding the camera to the app, the app will check the OTA server for a firmware update and, if available, require the user to download the update.
• Once added, if the camera is eligible for an update an icon will appear in the live view indicating there is an available update. Updates are in the device configuration dropdown under “Device Information”.

Which browsers does Clare support?

Currently, ClareVision cameras and NVRs support Google Chrome and Edge browsers.

Is there a Control4 driver for ClareVision cameras?

Yes. The Control4 driver supports live view and events including motion events and smart events. SDDP is not currently supported but will be released along with OVRC support before the end of 2021.

Is there a ClareOne driver for ClareVision cameras?

Yes. The ClareVision driver supports live view on the mobile app and ClareOne panel as well as motion and smart event propagation for automation rules and notifications.

Are the ClareVision cameras/NVRs OVRC enabled?

Currently, only ClareVision NVRs support OvrC. OvrC Support for cameras will be coming at a later date.

Do I need to do port forwarding?

No. ClareVision cameras and NVRs do not require any port forwarding.

NETWORK VIDEO RECORDERS (NVRS)

Are your NVR’s NDAA compliant?

Yes, ClareVision products are in full compliance with the NDAA regulations.

Which browsers does Clare support?

ClareVision NVR’s currently support Google Chrome and Edge browsers.

Can I record normal video (full time), smart events and motion events on independent schedules?

Yes. Recording schedules are controlled under storage management.

How much storage is on an NVR?

The 4-Channel has 1TB, the 8-Channel has 2TB and the 16-channel (upcoming) has 4TB of HDD storage on-board. The 4-channel and 8-channel support one HDD up to 8TB’s. The 16-channel supports up to 2 HDD or 16TB’s of total capacity

Do your NVR’s support outboard storage?

Yes. They support USB drives and NAS drives.

I see you list your NVR’s as 4, 8 and 16 channel but the camera support figures are higher, please explain?

The model ID for the NVR (e.g., 4-channel) is the number of PoE ports on-board. The channel support listed in the data sheet is the actual number of cameras the NVR will support. The four channel will support 9 cameras, the 8 channel will support 16 cameras and the 16 channel will support 25 cameras.

Keep in mind the cameras supported number is a license number and is not an absolute support figure. The incoming and outgoing bandwidth of the NVR will dictate the number of cameras the NVR can support in a real application. The bandwidth calculations are impacted by VBR settings, compression settings, framerate settings, motion in the field of view among other factors.

Does your NVR support 4K?

Yes. The NVR output is 4K. If the camera is not a 4K camera, the NVR will up-sample the video to 4K as it passes video to the HDMI port. The NVR will record up to 4k (8MP) camera streams.

Do your NVR’s have sensor inputs and relay outputs?

Yes. There are 16 sensor inputs and 4 relay outputs on the 16 channel NVR.

Does the NVR expose the camera settings for easy setup?

Yes, the NVR provides access to nearly all camera settings via the NVR web UI.

Is there a Control4 driver for the NVR?

Yes, the Control4 driver supports live view. If you would like events from a camera on the NVR, connect the camera to the NVR on the general LAN and not the PoE ports. When that is done, the camera driver can be used to directly access the cameras.

Is there a ClareOne Driver for the NVR?

Yes, the ClareOne driver supports live view. If you would like events from a camera on the NVR, connect the camera to the NVR on the general LAN and not the PoE ports. When that is done, the camera driver can be used to directly access the cameras.

Are the ClareVision NVR’s OVRC enabled?

Yes. ClareVision NVRs feature native OvrC Support.

Do the ClareVision NVR’s work with legacy ClareVision Plus cameras?

Yes. We have tested all ClareVision Plus cameras on the ClareVision NVR’s. They will add as ‘ONFIV’ cameras.

Do the ClareVision NVR’s work with Luma cameras?

Yes. We have tested products from each Luma category on the ClareVision NVR’s. They will add as ‘ONVIF’ cameras.

When a ClareVision Plus camera or Luma camera are connected to a ClareVision NVR, which app do I use?

Connecting a ClareVision Plus camera, Luma camera (or ONVIF camera) to a ClareVision NVR enables the ClareVision app to gain access to the cameras for purposes of live view and event playback. The live view NVR integration to ClareOne and Control4 will also function. In effect, the ClareVision NVR ‘adapts’ a ClareVision Plus or third party ONVIF camera to the ClareVision cloud. You can use this technique to take over camera systems that are ONVIF compliant and bring them to the Clare Cloud!

Can I add or change a ClareVision NVR hard disk drive?

Yes, the four, eight and sixteen channel NVR’s have 1TB, 2TB and 4TB hard disk drives pre-installed. The four and eight channel NVR’s can support one hard disk drive up to 8TB. The sixteen channel NVR has four drive bays total and ships with 1 4TB HDD pre-installed. The sixteen channel NVR can be equipped with up to four 8TB internal hard disk drives, or 32TB’s total storage. Additionally, the sixteen channel NVR has an external SATA port for connection to external hard disk arrays. The warranty is not voided when you change or upgrade hard disk drives.