Remote Access – XVRAID XVR-DVR-NVR CCTV DESK

EseeCloud CMS V3 User Manual

XVR AiD — Mon, 06 Jan 2025 18:12:45 +0000

EseeCloud CMS V3 User Manual, Welcome to use our products! We are very honored to gain your trust.In order to provide you with a comprehensive understanding of our product CMS and to facilitate its use, we have specially prepared this manual for you. It includes function introductions, operation steps, precautions, and more, serving as essential guidance for using this product.

Please read the instruction manual carefully before use. We believe it will greatly assist you in effectively utilizing this product. Additionally, if you have any questions during use, please feel free to contact us. We are here to serve you.

Applicable Model

This manual is for the Camera Monitoring System CMS.

Statement

This manual may contain areas where the product functions or operations do not match, or where the technology is inaccurate, or typographical errors occur. In such cases, our company will update the manual content according to product updates. We will regularly update the hardware and software products described in this manual. Updated content will be added to the new version of this manual without prior notice.

The contents of this manual are for reference guidance only and may not be identical to the actual product. Please refer to the actual product.

Agreement

To simplify the description in this manual, the following conventions are made:

• The Camera Monitoring System CMS is referred to as CMS or software for short.

• DVR, NVR, IPC, VR CAM, WIFI, IPC equipment, etc., are collectively referred to as equipment.

• “Click” refers to clicking the left mouse button. “Double click” refers to double-clicking the left mouse button.

• Some pictures are schematic; please refer to the actual software interface.

• A “note” hint text may appear in this manual to indicate that the operation is potentially risky. Ignoring the text may result in errors or unpredictable results.

EseeCloud CMS V3 User Manual

1. Introduction to CMS

1.1 Function Introduction

CMS, short for Camera Monitor System, is a camera monitoring client that offers online preview images, video storage, remote playback, device management, video/screen download, and other functions. It is suitable for DVR, NVR, IPC, VR CAM, Wifi IPC, and other devices.

CMS boasts the following characteristics:

• Interface Containerization Processing Mode: The client component adopts careful containerized processing in interface design. This simplifies the processing mode of multi-screen and single-screen switching, greatly enhancing the multi-screen operation feeling and adapting to the development trend of multi-screen PCs.

• Channelized Management Mode: The client component design incorporates a channelized management mode, abandoning the traditional design mode with the device as the core subject. This approach aligns better with the development direction of IP monitoring.

1.2 Operating Environment

Operating System:

• Microsoft Windows 7 / Windows 8 / Windows 10 (32/64 bit Chinese and English operating system)

• OSX 10.9 or higher (64-bit Chinese and English systems)

CPU: I3/2.4GHz or more

Memory: 4GB or more

Graphics Card:

• Integrated graphics (Intel HD 4000 and later)

• Discrete graphics (NVIDIA GeForce GTX 460 and later)

Note: Previewing multiple videos or high-resolution videos simultaneously requires higher hardware configuration and network bandwidth.

2. Installation login

2.1 Installation and Operation

• Step 1: Run the EseeCloud_Setup_3.0.1.exe installation package.

• Step 2: Select the display language during installation.

• Step 3: Read and determine whether to accept the agreement.

• Step 4: Determine the path for installation.

• Step 5: Installation is complete, and you can choose to run immediately.

Running program

Choose a language

Reading agreement

Determine the path

The installation is complete

2.2 User Login

2.2.1 Local Login

1.Enter Account + Password

2.Click to Login

• Local login can be accessed using the default account admin (the initial password is blank).

• Local login mode allows for remembering passwords or automatic login (automatic login is not possible when auto-lock status is enabled).

• Clicking the string in the login “forgot password” encrypts it. Different accounts correspond to different encrypted passwords.

• The account number box can display three accounts that are mostly used recently.

• Switch to Cloud Login

forget password

Note:

• The current CMS version only allows the username “admin” with an initial empty password. To prevent potential safety hazards, please ensure to modify the initial password after the first login to prevent unauthorized access to your device or other adverse consequences.

• For better protection of your privacy and product security improvement, we strongly recommend setting up complex passwords based on the following rules: greater than 8 characters, including uppercase and lowercase letters, numbers, special characters, etc. Please understand that it is your responsibility to properly configure all passwords and other related product security settings.

2.2.2 Cloud Login

User Login:

1.Enter ‘account + password’

2.Remember the password and automatic login (optional)

3.Click to Login

1.Enter ‘new account + password + email’

2.Click to register now

Retrieve Password:

1.Enter ‘Account + Mailbox’

2.Click to get the verification code and enter

3.Enter a new password

4.Click to complete

Note:

1.Cloud login should use the registered account (the account registered by the mobile app can also be used).

2.It’s recommended to use a valid mailbox for the registered account, facilitating password retrieval in special circumstances.

3.After registering an account, you need to log in to the email address provided during registration to activate the email address (click the received link to verify).

4.If the mailbox status is not activated, password retrieval won’t be possible after forgetting the password (the activation period is two days).

5.The first time you use EseeCloud_CMS, the software’s time zone will automatically sync with your computer, and you can change it later in the advanced settings.

Retrieve password

3. Live Preview

3.1 Connection/Disconnection

List Style: Tree Shape

• Connection:

1.Double-click on the selected device/channel to enter the connected video state.

2.After selecting the device/channel, right-click and select “Connect Video” to enter the connected video state (Figure 1).

• Disconnection:

1.Double-click to disconnect the current connection after selecting the connected device/channel.

2.After selecting the device/channel, right-click and select ‘Disconnect’ to disconnect the current connection.

Figure 1

List Style is Graphic:

1.After selecting the device/channel, click the play button on the device list to enter the connected video status.

2.After selecting the device/channel, click the stop button on the device list to disconnect the current connection status.

3.Right-click operation connection/disconnection is consistent with the tree list style. The specific operation can be referenced.

Note: Poor performance of the computer will directly affect the smoothness of the preview video. It is recommended that the number of channels connected to the device be gradually increased.

Video/Screenshot:

Video:

1.Click the Record button on the toolbar to enter the video recording status (as shown in Figure 1 below).

2.After the video operation, click the record button again to stop recording.

Note:

1.The actual recording duration is not equal to the time difference between the start recording time and the end recording time.

2.If the device network is interrupted, the recording will succeed but no video file will be saved.

3.The channel is maximized or minimized during recording, and the recording will stop.

Screenshot:

• Click the screenshot button on the toolbar to enter the screenshot status (as shown in Figure 1 below).

Note:

1.If the switching stream video is not loaded, the screenshot operation will be saved.

2.The screenshot does not have the function of continuous screenshots. Clicking the screenshot button once will capture an image.

Figure 1

Panorama Mode

Panorama Mode:

Enter:

1.Double-click the channel screen to enter the maximized state, right-click, and select “panoramic mode” to switch to the panorama mode. Entering panorama mode automatically switches the code stream to HD.

2.In 1 split-screen mode, the panorama mode option is available on the right toolbar. Click to select and switch to panorama mode.

Drop Out:

1.Click on Panorama mode on the right toolbar and select ‘Exit panorama’ to exit panorama mode.

2.Exit the panorama mode by exiting the screen from the split-screen state.

Panorama mode

Cylindrical mode

Expand mode

Split screen mode

Quad screen mode

Six-screen mode

Note:

1.In the local login mode, you can select 6 display modes in the panorama mode, including: panorama, cylinder, expand, 2 split screen, 4 split screen, 6 split screen.

2.In the cloud login mode, you can select 4 display modes in the panorama mode, including: panorama, cylinder, split screen, quad screen.

Installation Mode:

• Suspension: The direction of the cruise is clockwise.

• Wall-mounted: The direction of the cruise swings left and right.

Cruise Mode:

• Speed: Cruise provides speed 3S / speed 40S / speed 60S options, corresponding to slow / medium / fast speeds.

• Stop: Pause the current state of the cruise. Left-click on the channel in the cruise or select the stop cruise button in the cruise mode to click.

Panorama mode

Installation mode

Cruise mode

3.4 PTZ Control

Cruise / PTZ / Zoom / Focus / Aperture / Preset:

The PTZ control function can be used only when the PTZ device (such as a ball machine) is connected to the main control device (such as NVR or DVR).

• Cruise: Directly perform the screen cruise operation.

• Pan/Tilt: Adjust the lens direction.

• Zoom: Replace the mirror multiple.

PTZ speed level control

control

Zoom, focus

Preset

1.Adjust the PTZ control speed (default level is 6).

2.Adjust lens direction and cruise.

3.Adjust the zoom and focus of the PTZ camera.

4.Set and call the set bit, adjust the lens to the specified position, set the preset position, input the preset position later, click to call, and the lens will automatically move to the specified position.

3.5 Split Screen Number

• The client provides 1 split screen, 4 split screens, 6 split screens, 8 split screens, 9 split screens, 16 split screens, 25 split screens, 36 split screens, and 49 split screens. These nine split screens can be switched at will.

When the number of connected device channels is greater than the current number of split screens, the displayed split screen will automatically increase, reaching up to 49 split screens.

Split screen number

3.6 Other Functions

• Sharpness Switching: Use the SD SD and HD HD toggle buttons.

• Sound:

1.Select the screen channel.

2.Click to turn off/on the sound.

• Intercom:

1.Click the intercom button to open the intercom.

2.Left-click and hold the connection to talk, click the exit button to exit the intercom.

• Help: The help buttons under each interface provide the corresponding function instructions.

• Recording: When the live preview channel is recording, the icon will flash.

• Shut Down:

1.Click to exit the login button.

2.Click OK to log out and return to the login screen.

Other functions

Intercom

4. Video Playback

4.1 Video Playback

Playback Steps:

1.Select device channel.

2.Select video type.

3.Select playback date.

4.Confirm search video.

• Retrieving the video requires three conditions: ‘device channel + recording type + playback date’.

• Video types include: motion detection, timing detection, alarm detection, and manual detection. Generally, all types of videos can be retrieved by default.

• The selection of the device channel can directly affect the retrieval result. Be sure to confirm the online status of the device before recording.

Device channel

Video type

Date selection

4.2 Timed Playback

• Timed Playback: Select the timed playback operation, enter the recording effective time point in the time frame, and confirm that it can be played immediately (effective time point refers to the time retrieved by video playback).

• Time Drag Playback: Adjust the time scale and drag the cursor on the timeline to the corresponding time (as shown in Figure 2 below).

Timed playback

Timeline

4.3 Video Sync

Steps:

1.Retrieve video.

2.Check sync.

3.Switch time point.

• Date: Check the synchronization switching time point; the channel synchronization will not take effect.

• Time: Check the synchronous switching time point; the recording time of each channel will not take effect at the same time.

4.4 Video Download

• Batch Download: Enter the time period to be downloaded at the start time + end time according to the needs of the retrieved recording time range.

• Time Period Download: The time period of the video recording will also be displayed in the download resource. Click the download button for any time period that fits your needs.

Custom bulk download

Select time period to download

4.5 Other Functions

• Playback Control: Support playback/pause/stop control in video playback, select the screen form in playback and click operation.

• Time Scale Adjustment: The settings in the Setup Wizard are not set. The playback timeline scale will default to 60 minutes. You can also modify the scale value by clicking ‘Reduction’ or ‘Magnify’ during video playback.

Playback control

Adjustment scale

5. Equipment Management

5.1 Add Device

• Add a LAN Device:

1.Enter the device management interface.

2.Refresh LAN device.

3.Check the device and click Add (LAN device can be filtered by entering IP/ID in the filter box).

• Add Cloud ID Device:

• Manually enter the device ‘cloud ID number + channel number’, select ‘type’ according to the actual situation of the device, and click to confirm (the password can be selected according to the actual settings of the device).

• Add an IP/DDNS Device:

• Manually enter the device ‘IP/DDNS + port + channel number’, select ‘type’ according to the actual situation of the device, and click OK.

LAN add

Manual input addition

5.2 Modify Device

• Device Modification: In the device management or preview interface, after selecting the device and clicking Modify, the device interface will be loaded.

• Regional Modification: In the modify device interface, click the area drop-down box.

• Group Modification: After selecting the group under the device management interface, click the modify button to load the modified group information interface.

Note: Modify the channel name, panorama, and channel type corresponding to the channel number in the device. The panorama or channel type corresponding to each serial number is independent. The channel device in the device needs to be in the panoramic state. You can select the corresponding channel serial number to modify the panorama and channel type.

Device modification

Grouping

5.3 Remote Setting

5.3.1 VR CAM/Gateway Remote Setting

Setup Steps:

1.Selected device

2.Click Settings / Connect Device and click the Remote Settings button (as shown in Figure 1)

• Device Information: Content includes device model, device ID, OEM serial number, firmware version (providing check updates).

• Function Setting: The audio, prompt tone, prompt language, and display mode and resolution can be set on the configuration.

• Alarm System: The content includes motion detection, message push, motion detection sensitivity, and synchronization time function. If daylight saving time setting is available, you can set daylight saving time.

• TF Card Settings: TF card status, available / total capacity, TF card formatting function

Note:

• Alarm message push is not supported in local login. You need to check to switch to cloud login status.

• Currently supports VR CAM/gateway devices for remote setup.

Figure 1 Figure 2 Figure 3 Remote setting interface

5.3.2 D82 Series NVR Remote Setting

Setup Steps:

1.Selected device

2.Click Settings / Connect Device and click the Remote Settings button

• General Settings: Set the device’s time zone, date format, date, time, button sound, OSD transparency, VGA resolution.

• Channel Setting:

• Coding Settings: Can set the encoding mode of each channel, the resolution of the primary and secondary streams, the code stream control, the code stream rate, the video frame rate, and the encoding format.

• Color Adjustment: The tone, contrast, brightness, and saturation of each channel can be adjusted and copied to other channels.

• Channel OSD: The title, display status, and communication quality of each channel can be modified.

• Video Detection: Each channel alarm duration, detection type, sensitivity, whether to enable various alarm information push, detection area selection, deployment time selection can be modified, and can be copied to other channels.

• Code Stream Value: Monitor real-time stream for each channel.

• Channel Details: View the primary stream, secondary stream, and software version for each channel.

• Recording Settings: You can set the recording type and time of each channel. There are three types of timing, movement, and alarm.

• Network Settings:

• Network Settings: You can modify whether to use DHCP. If you choose No, you can modify the IP address, subnet mask, gateway, DNS address, and WEB port of the NVR.

• Dynamic Domain Name: You can modify whether to use DDNS. If yes, you can modify the provider, domain name, username, password.

• PPPOE: Select whether to enable PPPOE. If yes, you can modify the PPPOE protocol, username, and password. You can view the PPPOE status and PPPOE IP address.

• Wireless Setting: Can view ESSID, modify Wireless Channel, area.

• System Settings:

• Device Information: View device name, device model, device serial number, software version, release time, cloud ID.

• Log Information: Select the input type, start time, and end time and click Search to display the log number, time, and content that meet the conditions.

• User Management: Display serial number, username, whether it is super user, create new user, edit user, delete user, change password.

• Factory Settings: Choose simple restore (ignore channel and network configuration), restore all (restore all configurations).

• Online Upgrade: Select the local upgrade file and click on Upgrade Firmware.

5.4 Device Grouping

• Create a Group:

1.Click the ‘Create Group’ button.

2.Enter the content in the group name box and click OK.

• Add Channel:

• Enter:

1.Select the created group.

2.Click the Add Channel button.

• Import Selection:

1.Select the channel.

2.Select the group.

3.Click the import selection button.

• Import All:

1.Select the group.

2.Click to import all buttons.

• Modify/Delete:

• Edit: Select the group and click the Modify button to modify it.

• Delete: Delete the selected group or channel and click the delete button to delete.

Create a group

Add channel

Modify group

6. User Parameter

6.1 Basic Settings

• Split Screen Number: The selected split screen number is displayed after re-login. The CMS provides split screen options in 1, 4, 6, 8, 9, 16, 25, 36, and 49 forms.

• Display Language: CMS currently defaults to 9 display languages, such as Simplified Chinese and English. When you choose to log in again, it will switch to the corresponding language.

• Login Method: The cloud login mode is online. You need to connect to the external network when you log in. The local login does not have this requirement.

• List Style: The list style includes tree shape and graphics. The replacement is only in the real-time preview interface and the display of the device list under the playback interface. The device list under other interfaces is unified into the tree list style.

• Path Modification:

1.Screenshot Path: The screenshot file is saved in the snapshot folder by default and can be saved in other paths according to your needs.

2.Local Recording Path: The local recording file is saved in the record folder by default and can be saved in other paths according to your needs.

3.Video Download Path: The files downloaded by the playback video are saved in the video_download folder by default and can be saved in other paths according to your needs.

• Preview Sync Time: Check the time when the device is previewed, and the computer will be automatically synchronized (only IPC is supported).

Note: After modifying the settings, click “Finish,” and you will need to log in again. (It is best not to modify it to a directory containing Chinese.)

6.2 Advanced Settings

• Time Zone Setting: The local time zone can be selected according to the actual situation.

• Automatic Lock: Check the auto lock and enter the integer in minutes in the time frame. If no operation is performed on the CMS within the input time, the CMS will automatically lock.

• Automatically Connect Video: After logging in to the auto-connect video, log in to the CMS and automatically connect to the device added to the device list. The number of connected channels is the number of split screens in the basic settings.

Basic Settings

advanced settings

7. More Features

7.1 User Management

• New User:

1.Click New User.

2.Enter username (required) + note name (optional).

3.Click to confirm.

• Modify Permissions:

• Default: The default permissions include screenshot, video, PTZ settings, video playback, and remote download.

• Modify:

1.Click edit permission.

2.Check the permissions and devices/channels that need to be assigned to new users (you can click to select all).

3.Click to confirm.

• Other Functions:

1.Clear Password: If the login password of the new user is forgotten, you can log in to the newly created user again by directly clearing the password, and the internal setting data can be retained.

2.Modify the Note: Add a note, change the note, or delete the note, go to the modify note operation.

3.Delete User: If you feel that the newly created user is not necessary, click delete user to delete the user.

New user

Modify permissions

Modify user

7.2 Log Query

• Inquire:

1.Confirm ‘start time + end time.’

2.Confirm ‘log type’ (including alarm log, log in log, and operation log).

3.Selected area.

4.Click to query.

7.3 Resource Management

• Screenshot:

• Search for:

1.Select ‘start time + end time’.

2.Click search.

• Preview:

1.Method one: Select ‘preview’ for right-click operation.

2.Method two: Click the screenshot file retrieved.

• Delete:

1.Method one: Select ‘Delete’ for the right-click operation.

2.Method two: Enter the screenshot preview state and click to select ‘delete’.

• Location:

1.Method one: Select ‘Open location’ for right-click operation.

2.Method two: Click ‘Save Location’ in the resource information.

• Resource Information: ‘user, resource size, resolution, device name, associated channel, screenshot time, save location’, including the above content (as shown in Figure 2).

• Replacement Size: ‘Original size, maximize, zoom in, zoom out, resource information, delete’, the screenshot preview status includes the above status/functions that can be switched to.

• Video:

• Search for:

1.Select ‘start time + end time.’

2.Select the recording type (including preview video, playback video, and default all types).

3.Click search.

• Resource Information: ‘user, resource size, recording type, device name, associated channel, recording time, save location’, including the above.

• Other Functions: The operation steps of ‘preview, resource information, location, delete’ function are the same as the screenshots. For details, please refer to the operation in the screenshot.

Figure 1 Right click operation

Figure 2 Resource information

7.4 System Info

• Version Information: The content is displayed as follows: ‘version number, date’.

• Change Password:

1.Enter ‘original password + new password + confirm new password’.

2.Click to confirm.

3.Re-login to verify the password.

• Sign Out: Click the ‘Exit Login’ button to quit the login status of the current account.

8. Frequently Asked Questions

Question One: After installation, open the CMS and display “Cannot load plugin”?

Answer One:

1.Please confirm whether the installation path uses Chinese when installing, as the plugin is temporarily not compatible with Chinese paths.

2.After confirming the non-Chinese path, if the problem persists, you can contact technical support for assistance.

Question Two: After connecting multiple channels of video (more than 30 channels), videos stop for a few seconds, all channels are automatically disconnected into the black screen. The device connected again has no response. Do we need to restart the CMS?

Answer Two: The new version of CMS3.0.1 runs with higher memory. If you connect many channels using a lower configuration computer, the computer system will run out of memory, causing the CMS to run abnormally. If the computer configuration is slightly lower, it is recommended not to connect too many channels. Optimization work has been planned for this situation.

Question Three: When CMS is installed on the OSX system, it displays “File is corrupted” or “Unable to open” when it is opened?

Answer Three:

1.Open “System Settings” → “Security and Privacy” → “Allow applications to be downloaded from the following location”, check “any source” (applies to versions prior to OSX10.12.X).

2.Open “Terminal”, enter the string “sudo spctl –master-disable”, press the “Enter” key, enter the sudo password (applies to versions after OSX10.12.X). If the above method still does not work, please contact us to help you solve it.

Question Four: After starting a window and flashing, it will not start or XP will appear. Open the software to indicate 0a00000000 memory referenced by 0x00000000 instruction. The memory cannot be ‘written’.

Answer Four: This is likely a video card driver problem. Updating the graphics card driver can solve it.

Question Five: It shows mfc100u.dll lost when opening computer.

Answer Five: Install the VC++2010 library to solve the problem.

How to Set Up Remote Camera Monitoring

XVR AiD — Sat, 16 Nov 2024 07:30:44 +0000

How to Set Up Remote Camera Monitoring: Step by Step Guide, You can realize cctv remote viewing from anywhere in two ways: connecting IP cameras over the Internet via an APP/Client, or setting up port forwarding. In this post, we’ll show you what to do when you can’t view security cameras remotely and give you practical tips to solve your problem.

What is Remote Viewing Camera?

A remote viewing camera is a surveillance device that allows users to monitor and access live video feeds from a distance. In most cases, remote viewing CCTV can be accessed and control from anywhere with Internet connection.

Due to this, connecting security camera to phone is the TOP 1 and easiest and most convenient method for you to set up an IP camera for remote viewing and get remote cam access.

How to Set Up Remote Camera Monitoring via Smartphone

Viewing IP cameras remotely is easier than you might think. Here’s how to view IP camera remotely on Android phone.

The best way on how to view security camera over Internet remotely on android phone is streaming IP Cameras over Internet via Manufacturers’ App/Client. These applications are totally designed for the security cameras by manufacturers, so unlike the third-party software, you don’t need to be concerned about any compatibility issues when watching IP cams from anywhere using Internet. On top of that, the security camera providers will also release new software versions regularly to unlock some improved features.

Thanks to the P2P technology, you are able to watch your CCTV cameras from anywhere using Internet in a breeze, like checking on your remote shed or cabin from the comfort of your home.In our test, we used Reolink RLC-810A for the Reolink remote access setup via UID method.

Below are the 3 simple steps to configure an IP camera on Internet for remote viewing within less than 2 minutes.

• Step 1: Download the Reolink App or Client to your phones or computers.

• Step 2: Launch the app and enter a unique ID number (UID) to add the camera device.

• Step 3: Click the camera on the App or Client and you can view your IP camera over the Internet outside the home network.In fact, not only yourself, your family members can also stream your IP camera over Internet simultaneously.

In fact, not only yourself, your family members can also stream your IP camera over Internet simultaneously.

You can also learn how to find your CCTV camera IP address and set up remote viewing by checking out this video tutorial below.

How to Set up Security Camera Remote Viewing via Port Forwarding

So what is the alternative to the UID method for you to stream IP cameras over Internet? And how do you set up a security camera to see it remotely via a web browser?

Below is a step-by-step guide to help you set up your IP camera for remote viewing by port forwarding, which applies to the IP camera remote access via different WiFi connections of all security cameras brands as well as the NVR remote viewing.

Step 1: Find the IP Address of Your Security Camera

To watch your CCTV cameras from anywhere using Internet, the first thing is to find your camera IP address.

Typically the security camera software has a page that displays your network status, including the IP address of your security camera.

Taking Reolink RLC-820A for example, after launching Reolink Client on your computer and logging into the camera, you can click “Device Settings” and go to “Network” to find you camera IP address.

Or you can also refer to your router configuration software and look for a screen that shows the IP addresses of attached DHCP clients. You can also use an ip address camera viewer online.

Step 2: Check the WAN/External IP Address of Your Router

Then you neeed to get your current WAN IP address of your home network.

But here comes the question: your external IP address may keep changing because most ISPs allocate dynamic IP addresses to their customers.

If you want to save the trouble to check the WAN IP address of the router every time you access the IP cameras from Internet, or you can’t find out the new WAN IP address when you are away, use the DDNS service to configure your IP camera on Internet for remote viewing.

The main benefit of DDNS is that it will allocate a host name to your camera so you don’t have to remember your IP address, making it much easier for you to watch your CCTV cameras from anywhere using Internet.

Step 3: Check the Camera Port Numbers & Forward Ports to the Router

The port numbers are used when you need to set up an IP camera for remote viewing. Routers rely on ports to limit data which can access your IP camera and differentiate between multiple devices.

If you have two security cameras on your network and you want to view both IP cameras online remotely, remember to use different port numbers. (You may chage the port numbers based on your situations.)

After you have obtained the “HTTP port” and “RTMP port” from the camera device settings, the next step to configure security IP cameras for remote viewing is to log into the web interface of your router and set up the port forwarding rules (shown as below).

Step 4: Enter the URL Address

Now that you have obtained all the essential information, the final step to set up an IP camera for remote viewing is to open your web browser and enter the URL address, which consists of your WAN IP address and the port number.

For example, if your WAN IP address is 182.37.154.136, and the HTTP port is 8001, the URL address you enter on the web browser should be “http://182.37.154.136:8001”. And then you can view your security IP cameras online free outside your home network.

How to Monitor CCTV Remotely without Internet

“Can I get remote camera access without Internet in my barn?”“I’m looking for a system to monitor a cabin in a remote area. There is no Internet available, I would like to get security camera remote access on my phone when necessary.”

Well, the way of watching CCTV online depends on which type of Internet camera for home you are using.

For the wired IP cameras that connect to a broadband modem or router through Ethernet cables, and the wireless security cameras that use a WiFi router for data transmission, Internet is required if you want to setup these IP cameras for remote viewing.

BUT your hands are not tied even if you want to watch live home cameras or remotely access your IP cameras without Internet. Thanks to the advanced technology in the security camera field, the cellular-based security cameras that operate on the 4G mobile data are designed to solve the “no Internet” dilemma.

So you can remotely access your security IP cameras on your smartphone via the UID method in areas with limited or no Internet, such as your barns, farms, sheds, cabins, vacation homes, campsites, hotels, etc.

Note: Though you can view the 4G security cameras remotely without Internet, make sure you place these cameras in cellular coverage so that they can receive good and stable signals for your remote access.

Below is the live streaming video when a user accesses Reolink Go Plus cellular 4G security camera remotely on his phone.

How to Get Remote Web Camera Access via IP Address Camera Viewer Online

If you don’t want to use the manufacturer’s propietary app, consider online IP camera viewer. IP address camera viewers online provide a powerful solution for remote security camera monitoring.
These apps allow users to keep an eye on their property from virtually anywhere.

With the ability to access IP cams from the internet, these tools enable seamless live security camera surveillance. This remote CCTV capability is particularly beneficial for both residential and commercial properties

For example, you can get your Wifi camera access and control via smartphones, tablets, or computers. By using IP address camera viewers, users can experience the convenience and enhanced security of monitoramento cameras via internet. Some popular online camera viewing apps include:

• Blue Iris

• iSpy

• VLC Media Player

• tinyCam Monitor

• Agent DVR

Can’t View IP Camera Remotely – Troubleshooting Tips

Still can’t view your IP camera outside your network? Or failed to remotely connect your IP camera to the Internet after trying out the procedures above? There could be multiple factors responsible for the the issue of “can’t access security cameras remotely”, such as the incorrect username and password, weak network signals, out-of-date camera firmware versions, etc.

Now read the insider tips to troubleshoot the specific problems or refer to the infographics below for a quick glance.

What to Do If You Can’t Watch CCTV Cameras from Anywhere Using Internet on Android Phones or iPhones via UID Method

• Make sure you have entered the right username and password.

• Ensure that you have enabled the UID of your security cameras.

• Check whether your cameras have connected to the network.

• Ensure the firewall doesn’t prevent the UDP port when you intend to access IP cameras online on android phones or computers via the UID method.

• Check if your phones or computers have strong and stable network signals.

• Update your security camera and the software to the latest versions.

What to Do If You Cannot Remotely Watch Security Cameras Using the Internet via Port Forwarding

• Make sure your cameras are connected to the network.

• Ensure all the ports of the network configuration are mapped to the Internet.

• Open the firewall in the router to allow Internet access to the camera.

• If your computer has a firewall, proxy, ad-blocking software, anti-virus software or the like, try to temporarily disable them and connect the Server again.

• Check your Web Server Settings and ensure that your user account has permission to access the IP cameras.

• Make sure the cameras are compatible with the web browser you are using for remote viewing.

Potential Risks of Remote Access to Security Cameras

Security risks associated with IP camera setup for remote viewing? Fear NOT ! Although the P2P applications contain some safety vulnerabilities, security camera providers can take advantage of the encryption technology, such as SL encryption, WPA2-AES encryption and SSL-TLS enabled to prevent exposure of your privacy.

Since the security camera remote viewing free software is required if you want to set up your IP camera (e.g. Reolink, Amcrest, Swann, etc.) for remote access via the UID, it may not apply to you if your camera provider doesn’t offer such IP camera remote viewing software.

Note: Broadly speaking, the camera software provided by the sellers can only allow you to watch CCTV cameras of the same brand from anywhere using Internet. It can’t work with the security cameras of other brands.

FAQs

Can I Visit My Wi-Fi Security Camera While I Am in Another Country?

can i visit my wi-fi security camera while i am in another country

Definitely yes! By following the above procedures about how to set up an IP camera for remote viewing, you’ll be able to view your IP cameras online om your smartphone when you go abroad and outside your network using Internet or different WiFi connections, even you are travelling abroad.

Can I Set up My IP Cameras for Remote Viewing without Using a DDNS Service?

If your Internet service provider offers you a static IP address, you can always remotely view your security camera using the Internet with the same IP address and the DDNS setup is not required.

Another easier way to stream your IP cameras over Internet without DDNS service is to buy security cameras for home that support P2P. You simply need to enter the camera UDI and password, and then you’ll be able to view the IP cameras online outside your network from anywhere.

Is There Free Surveillance Software to Access my IP cameras from Another Computer Network?

Normally when you buy security cameras, the camera sellers would offer free software for you to set up the IP cameras for remote viewing (like Reolink App and Client) via different WiFi networks.

Is It Possible to Manage Multiple Cameras with the Same App?

Yes, you can also watch multiple CCTV security cameras from anywhere using Internet with the same App or Client. For example, both Reolink App and Client allow for multi-screen live streaming (up to 16 screens for app and 36 screens for Client) on your phone and computer.

Conclusion

This guide illustrate how to set up remote viewing for your security camera. Remotely accessing to your camera models can be easy if you follow the right guidelines.

If you have more problems about setting up your IP camera for remote viewing or watching CCTV cameras from anywhere using Internet, feel free to leave your comment below and we would love to help.

remote camera monitoring, remote video surveillance, IP camera setup, CCTV setup, security camera setup, home security system, surveillance system, video surveillance system, remote access, cloud monitoring, remote viewing

how to set up remote camera monitoring, remote camera monitoring system, DIY remote camera system, wireless remote camera, remote camera app, remote camera software, remote camera access, remote camera viewer

IP camera configuration, CCTV configuration, network camera setup, port forwarding, DDNS, VPN, cloud storage, mobile app, desktop app, web interface, RTSP, ONVIF, H.264, H.265

best remote camera system, affordable remote camera, remote camera for home, remote camera for business, remote camera for baby monitoring, remote camera for pet monitoring, remote camera for vacation home, remote camera troubleshooting, remote camera tips

how to set up a remote camera system without a DVR, how to access remote camera on smartphone, how to set up remote camera on router, how to choose the best remote camera, how to secure remote camera, how to monitor remote camera remotely, how to set up remote camera for vacation home, how to set up remote camera for business, how to set up remote camera for rental property

Hikvision remote camera setup, Amcrest remote camera setup, Reolink remote camera setup, Wyze remote camera setup, EZviz remote camera setup, Arlo remote camera setup, Nest camera remote access
remote camera monitoring cost, remote camera monitoring benefits, remote camera monitoring challenges, remote camera monitoring security, remote camera monitoring software comparison, remote camera monitoring best practices

Comprehensive Panasonic Security System Manual Guide

XVR AiD — Sat, 20 Jul 2024 08:55:22 +0000

Comprehensive Panasonic Security System Manual Guide, Discover a complete manual guide for Panasonic Security Systems, covering installation, configuration, troubleshooting, and advanced features to ensure optimal security.

Introduction

Panasonic Security Systems are renowned for their reliability and advanced features, offering top-notch security solutions for both residential and commercial properties. This comprehensive manual guide will walk you through every aspect of using a Panasonic Security System, ensuring you get the most out of your investment. From installation to troubleshooting, we’ve got you covered.

Headings	Sub-Topics
Understanding Panasonic Security Systems	Overview, Features, and Benefits
Choosing the Right Panasonic Security System	Factors to Consider, Product Comparison
Pre-Installation Planning	Site Survey, Equipment Requirements
Installing Your Panasonic Security System	Step-by-Step Guide, Tools Needed
Setting Up Your Panasonic Security System	Initial Configuration, Network Setup
Understanding the Control Panel	Key Functions, User Interface
Adding and Managing Devices	Cameras, Sensors, Accessories
Customizing Security Settings	Alerts, Notifications, User Permissions
Using the Panasonic Security App	Features, Mobile Access, Remote Control
Monitoring and Surveillance	Live View, Recording, Playback
Maintenance and Regular Checks	Routine Maintenance, System Health
Troubleshooting Common Issues	Error Messages, Connectivity Problems
Enhancing Your Security System	Integration with Other Systems, Upgrades
Data Security and Privacy	Encryption, User Data Protection
Understanding Warranties and Support	Warranty Details, Customer Support Options
FAQs About Panasonic Security Systems	Common Questions and Answers
Advanced Features and Customization	AI Features, Custom Integrations
Cost Considerations and Budgeting	Cost Analysis, Budget Planning
Case Studies and Real-Life Applications	Success Stories, Practical Uses
Future Trends in Security Systems	Emerging Technologies, Innovations
Conclusion	Summary, Final Thoughts

Understanding Panasonic Security Systems

Panasonic Security Systems offer a wide range of features designed to provide robust security for homes and businesses. These systems include high-definition cameras, advanced motion detectors, and user-friendly control panels, ensuring comprehensive protection.

Overview

Panasonic Security Systems come in various models tailored to meet different security needs. Whether you need a simple setup for a small apartment or a complex system for a large business, Panasonic has a solution.

Features and Benefits

• High-Definition Cameras: Capture clear video footage, even in low light conditions.

• Advanced Motion Detection: Reduce false alarms and increase accuracy.

• User-Friendly Interface: Easy to navigate and control.

• Remote Access: Monitor your property from anywhere via mobile app.

• Reliable Performance: Durable and designed for continuous operation.

Choosing the Right Panasonic Security System

Selecting the right security system involves considering various factors such as the size of your property, specific security needs, and budget.

Factors to Consider

• Property Size: Larger properties may require more cameras and sensors.

• Security Needs: Identify critical areas that need surveillance.

• Budget: Consider initial costs and ongoing maintenance expenses.

Product Comparison

Panasonic offers several models with different features. Compare specifications to find the best fit for your needs.

Pre-Installation Planning

Proper planning is essential to ensure a smooth installation process.

Site Survey

Conduct a thorough site survey to identify the best locations for cameras and sensors.

Equipment Requirements

List all necessary equipment and ensure compatibility with your Panasonic Security System.

Panasonic i-PRO SmartHD Security Cameras Video

https://www.youtube.com/watch?v=yhBQZjmQFEM

Installing Your Panasonic Security System

Follow this step-by-step guide for installing your security system.

Step-by-Step Guide

1.Mount Cameras: Install cameras in predetermined locations.

2.Install Sensors: Place motion sensors strategically.

3.Connect Control Panel: Ensure a stable power source and network connection.

Tools Needed

• Drill

• Screwdrivers

• Ethernet cables

• Mounting brackets

Setting Up Your Panasonic Security System

Once installed, configure your system for optimal performance.

Initial Configuration

• Power Up: Turn on all components.

• Sync Devices: Connect cameras and sensors to the control panel.

Network Setup

• Wi-Fi Connection: Ensure all devices are connected to your network.

• Ethernet Setup: For wired systems, connect using Ethernet cables.

Understanding the Control Panel

The control panel is the heart of your security system.

Key Functions

• Arm/Disarm System: Control your security settings.

• Live Monitoring: View real-time footage.

• Notifications: Receive alerts for any suspicious activity.

User Interface

The interface is designed to be intuitive, making it easy to navigate through settings and options.

Adding and Managing Devices

Expand your system by adding more devices.

Cameras

Install additional cameras to cover more areas.

Sensors

Add motion detectors, door/window sensors, and other accessories.

Customizing Security Settings

Tailor the system to your specific needs.

Alerts and Notifications

Set up custom alerts for different types of events.

User Permissions

Manage who has access to your security system.

Using the Panasonic Security App

The mobile app allows you to control your system remotely.

Features

• Live View: Monitor your property in real-time.

• Remote Arm/Disarm: Control your system from anywhere.

Mobile Access

Download the app from the App Store or Google Play.

Monitoring and Surveillance

Keep an eye on your property at all times.

Live View

Access live footage from your cameras.

Recording and Playback

Record footage and play back important events.

Maintenance and Regular Checks

Regular maintenance ensures your system operates efficiently.

Routine Maintenance

• Clean Cameras: Remove dust and debris.

• Check Connections: Ensure all cables are secure.

System Health

Regularly check system health through the control panel.

Troubleshooting Common Issues

Resolve common problems with these tips.

Error Messages

Understand and fix common error messages.

Connectivity Problems

Ensure a stable network connection to avoid interruptions.

Enhancing Your Security System

Improve your system by integrating with other technologies.

Integration with Other Systems

Combine with home automation or other security solutions.

Upgrades

Upgrade firmware and hardware to access new features.

Data Security and Privacy

Protect your data with these tips.

Encryption

Ensure all data is encrypted.

User Data Protection

Follow best practices to protect user information.

Understanding Warranties and Support

Know your warranty and support options.

Warranty Details

Check warranty coverage for different components.

Customer Support Options

Contact Panasonic support for any issues.

FAQs About Panasonic Security Systems

How do I reset my Panasonic Security System? To reset your system, follow the instructions in the user manual or contact customer support.

Can I integrate my Panasonic Security System with other smart devices? Yes, Panasonic systems can be integrated with various smart home devices.

What should I do if my camera stops working? Check the power supply and network connection. If the issue persists, contact support.

How often should I update my system’s firmware? Regularly check for firmware updates and install them to ensure optimal performance.

Is my footage stored locally or in the cloud? Panasonic systems offer both local and cloud storage options.

Can I access my system remotely? Yes, use the Panasonic Security App for remote access.

Advanced Features and Customization

Explore the advanced capabilities of your security system.

AI Features

Leverage AI for enhanced motion detection and facial recognition.

Custom Integrations

Customize your system with third-party integrations.

Cost Considerations and Budgeting

Plan your security investment wisely.

Cost Analysis

Compare the costs of different Panasonic models.

Budget Planning

Allocate budget for installation, maintenance, and upgrades.

Case Studies and Real-Life Applications

Learn from real-life examples.

Success Stories

Read about how others have successfully implemented Panasonic Security Systems.

Practical Uses

Discover various applications of security systems in homes and businesses.

Future Trends in Security Systems

Stay ahead with emerging technologies.

Emerging Technologies

Keep an eye on new developments in security technology.

Innovations

Explore innovative features that are shaping the future of security systems.

Conclusion

Panasonic Security Systems provide reliable and comprehensive security solutions. By following this manual guide, you can ensure your system is installed, configured, and maintained correctly, providing peace of mind and enhanced security for your property.

Security Camera Buying Guide 2024

XVR AiD — Fri, 28 Jun 2024 06:39:18 +0000

Security Camera Buying Guide and How to Choose, In today’s fast-paced world, the importance of security cannot be overstated. Whether you’re a business owner looking to protect your assets or a homeowner keen on ensuring the safety of your family, investing in the right security camera is essential. With many options available, making the right choice can seem challenging. This comprehensive guide is designed to help you navigate through the security cameras available with us at CCTV Security Pros, ensuring that you make an informed decision that meets your specific needs.

Understanding the Basics: What You Need to Know Before Buying

Before diving into the different types of security cameras, it’s crucial to understand some basic but important considerations that will influence your choice.

Identifying Your Security Needs

When considering the installation of a security camera system, the first step is to assess your specific needs. The requirements of a sprawling estate versus a cozy apartment differ vastly. Similarly, a retail business will have different security needs compared to a manufacturing unit. Begin by asking yourself the following questions:

• What are the key areas that need surveillance?

• Do I need indoor, outdoor, or both types of cameras?

• How important is image quality to me?

• What’s my budget?

Answering these questions will lay a solid foundation for your search and ensure that you don’t end up with a security camera system that’s either overkill or insufficient for your needs.

Security Camera Buying Guide and How to Choose

Considering the Location

The location where the cameras will be installed plays a pivotal role in your decision-making process. Indoor cameras differ significantly from outdoor cameras, particularly in terms of durability and weather resistance. If you’re considering outdoor surveillance, ensure the cameras are weatherproof and have adequate night vision capabilities.

Exploring Security Camera Technologies

When choosing a security camera, it is critical to understand the differences and similarities between IP security cameras and HD over coax security cameras to select the right type for specific needs.

What are IP Security Cameras?

IP (Internet Protocol) security cameras are digital video cameras that use networks to transmit image data and control signals over an IP network. These cameras can be directly accessed from a network connection, making them highly versatile for a variety of settings.

Advantages of IP Security Cameras

High Resolution: IP cameras are known for high-resolution images, which can go up to 4K resolution, allowing for clearer and more detailed images.

Scalability: They are highly scalable as one can easily add more cameras to the existing network without significant infrastructure changes.

Remote Accessibility: IP cameras can be accessed and controlled remotely, making it possible to monitor footage from anywhere in the world via the internet.

Disadvantages of IP Security Cameras

Cost Factors: They tend to be more expensive than other types, both in terms of initial setup and maintenance.

Network Dependency: These cameras require a stable network connection, which can be a limitation in areas with poor connectivity.

What are HD Over Coax Security Cameras?

HD over coax security cameras transmit high-definition video over coaxial cable. These cameras are an upgrade from the traditional analog CCTV systems, providing better resolution and clarity without the need for new cabling infrastructure.

Advantages of HD Over Coax Security Cameras

Cost-effectiveness: Generally less expensive than IP cameras and utilize existing coaxial cable setups.

Ease of Installation: They are relatively easy to install, especially if replacing existing analog systems.

Reliability: Less dependent on network bandwidth and do not suffer from network-induced lag.

Disadvantages of HD Over Coax Security Cameras

Limited Resolution: While improved over analog cameras, their resolution does not compare to the high levels achievable by IP cameras.

Scalability Issues: Adding more cameras often requires additional DVRs (Digital Video Recorders), which can complicate the system.

Comparing Video Quality and Resolution

When it comes to resolution, IP cameras generally offer more with options going up to 4K, whereas HD over coax typically maxes out at 1080p. This makes IP cameras a better choice for scenarios where detail is critical.

Comparing the Cost Implications

IP cameras have a higher upfront cost primarily due to the need for networking equipment and possibly, higher quality cabling. However, HD over coax cameras often involve less expensive equipment but might incur more costs if extensive cabling is needed.

Remote Access Capabilities

Both IP camera systems and HD over coax camera systems excel in remote access as they can be configured for view from any location thru PC, cell, or tablet through the internet.

Use Case Analysis

For large, expanding facilities or highly detailed surveillance needs, IP cameras would be more suitable. In contrast, HD over coax cameras are well-suited for smaller setups or where budget constraints are significant.

Future Trends in Security Cameras

The future likely holds further enhancements in camera resolution and network capabilities for IP cameras, and continuous integration of advanced analytics. HD over coax might see improvements in compression and transmission to allow for higher resolutions.

Both IP and HD over coax security cameras offer distinct advantages and disadvantages. Your choice should depend on your specific needs, budget, and desired scalability. Understanding these aspects will guide you in choosing the most suitable type.

Exploring Types of Security Cameras

With a basic understanding of what to consider before purchasing, let’s delve into the most popular types of security cameras available on the market.

Dome Cameras

Dome cameras are named for their dome-like shape, making them more discreet than other types. They’re excellent for indoor use, especially in retail or commercial settings, where they can blend in with the decor while providing a wide viewing angle. In addition, most of our dome cameras are also vandal resistant.

Bullet Cameras

Bullet cameras are long and cylindrical. They are typically used outdoors, mounted on walls or ceilings. These cameras are known for their strong night vision capabilities and long-distance viewing, making them ideal for monitoring large areas like backyards or parking lots. Whether you need a wide angle or a zoom we have the perfext bullet security camera for you.

Wireless vs. Wired Cameras

Another crucial consideration is whether to go for wireless or wired cameras. Wireless cameras offer flexibility in placement and are generally easier to install. However, they depend on your Wi-Fi signal’s strength and can be more susceptible to interference. On the other hand, wired cameras require a more complex installation process but provide a more stable and reliable connection, making them well-suited for extensive surveillance systems.

Smart Cameras

Smart cameras come with features like motion detection, facial recognition, and automatic alerts. These cameras not only record footage but also analyze it, sending you notifications when something out of the ordinary happens. They’re perfect for homeowners who want to stay informed about their property’s security in real time. We also have specialty cameras such as PTZ, license plate, and fisheye cameras.

Key Features to Look For

Delving deeper into the specifics, here’s what you should look for when shopping for a security camera:

• Resolution: Higher resolution cameras produce clearer images, making it easier to identify faces or license plates. Look for cameras with at least 1080p resolution for adequate clarity.

• Field of View: This determines the width of the area a camera can cover. A wider field of view means fewer cameras required to monitor the same space.

• Night Vision: Crucial for outdoor cameras, night vision capabilities allow your camera to capture clear footage even in low light conditions.

• Motion Detection: Cameras with motion detection can send alerts and start recording only when movement is detected, saving storage space and allowing for more efficient monitoring.

• Weather Resistance: For outdoor cameras, it’s essential to choose models that are weather-resistant to ensure durability against elements like rain, wind, or dust.

• Audio Features: Some cameras come with built-in microphones and speakers, enabling two-way communication. This can be particularly useful in scenarios where you need to interact with visitors or deter potential intruders verbally.

Selecting the right security camera for your home or business requires careful consideration of your specific security needs, the features you value most, and the type of camera that best suits your space. By taking the time to understand the different options available and what each offers, you can make an informed choice that ensures your property is watched over effectively. Remember, the goal is not just to deter potential intruders but to give you the confidence that comes with knowing your space is secure. Whether you opt for a dome camera for your business interior or a bullet camera for outdoor surveillance, ensuring your peace of mind is the ultimate priority.

Hikvision NVR 5.0 Professional Installation Guide

XVR AiD — Tue, 18 Jun 2024 12:39:43 +0000

Hikvision NVR 5.0 Professional Installation Guide, This guide outlines the essential steps for installing and configuring your Hikvision NVR 5.0. For comprehensive, model-specific instructions, consult the official Hikvision user manual downloadable from their website (Hikvision website).

Hikvision NVR 5.0 Professional Installation Guide

Hardware Installation

1.Power Connection: Securely connect the power adapter to the NVR’s designated port and a reliable power outlet.

2.Monitor Connection: Establish a video connection between your monitor and the NVR using a VGA or HDMI cable.

3.Mouse Connection: Plug a USB mouse into a readily available USB port on the NVR for system navigation.

4.Camera Integration:

◦ PoE Cameras: If your cameras support Power over Ethernet (PoE), directly connect their PoE cables to the corresponding PoE ports on the NVR.

◦ Non-PoE Cameras: For non-PoE cameras, utilize a network switch to connect the camera’s network cable to your network. Additionally, provide a separate power supply for the camera.

5.Network Connectivity: Utilize an Ethernet cable to establish a connection between the NVR’s LAN port and your network switch or router.

Software Configuration

1.System Boot-up: Power on the NVR and monitor. The system will undergo a boot-up sequence.

2.Initial Setup Wizard: The NVR might prompt you with a setup wizard to configure essential settings like language, time zone, and a secure password. Carefully follow the on-screen instructions to complete this initial setup.

3.Main Menu Navigation: Upon successful setup, you will arrive at the NVR’s main menu. Utilize this menu for further configuration:

◦ Network Configuration: Establish network settings such as IP address, subnet mask, and gateway. Refer to your network router’s settings if necessary.

◦ Storage Management: Format the connected hard drive(s) to enable video recording functionality on the NVR.

◦ Device Access: Add your IP cameras to the NVR. You can choose between manual configuration or automatic detection (Plug and Play). Manual setup requires the camera’s IP address and login credentials.

◦ Recording Management: Define recording schedules, video resolution, and other recording parameters to suit your needs.

◦ System Management: Manage user accounts, date & time settings, and other system configurations for optimal operation.

Additional Resources

• Hikvision User Manuals: Access the official user manual for your specific NVR model by searching the Hikvision website using your model number (e.g., DS-7608NVI-I2/8P/4S).

• Hikvision YouTube Tutorials: Numerous informative video tutorials exist on YouTube to guide you through the setup process visually. Search for “Hikvision NVR 5.0 setup” to find relevant videos.

Important Note: The provided steps serve as a general guideline. Specific configurations might differ based on your NVR model. Always refer to the official user manual for detailed instructions and advanced functionalities.

Setting up a Hikvision NVR (Network Video Recorder) involves several steps, including hardware setup, network configuration, and camera configuration. Here’s a detailed guide to help you set up your Hikvision NVR 5.0:

1. Hardware Setup

Step 1: Unbox and Connect Components

• Unbox your NVR and ensure all components are included (NVR unit, power adapter, mouse, remote control, and necessary cables).

• Place the NVR in a stable, well-ventilated location.

Step 2: Connect the NVR to a Monitor

• Use an HDMI or VGA cable to connect the NVR to a monitor.

Step 3: Connect the NVR to the Network

• Connect the NVR to your router using an Ethernet cable.

Step 4: Connect Cameras to the NVR

• If your cameras support PoE (Power over Ethernet), connect them directly to the NVR’s PoE ports.

• If not, connect the cameras to a separate PoE switch or power them individually and connect them to the network.

Step 5: Power Up the NVR

• Plug in the NVR and turn it on using the power button.

2. Initial Configuration

Step 1: Boot Up and Log In

• Turn on the monitor and wait for the NVR to boot up.

• You will be prompted to log in. Use the default login credentials (usually username: admin and password: 12345 or a blank password). It is recommended to change the default password during the initial setup for security purposes.

Step 2: Set Date and Time

• Navigate to Configuration > System > General.

• Set the correct date, time, and time zone.

Step 3: Network Settings

• Navigate to Configuration > Network > General.

• Ensure the NVR has a valid IP address (preferably set to a static IP for stability).

• Configure DNS settings if necessary.

3. Adding Cameras

Step 1: Detect and Add Cameras

• Navigate to Camera Management or Camera > IP Camera.

• Click on Search to detect available cameras on the network.

• Add the detected cameras. You may need to enter the camera’s login credentials if they are not using the default ones.

Step 2: Configure Camera Settings

• Once the cameras are added, you can configure individual camera settings like resolution, frame rate, and encoding options.

4. Recording Settings

Step 1: Set Up Recording Schedule

• Navigate to Storage > Schedule Settings.

• Set up a recording schedule for each camera (continuous, motion detection, or event-based).

Step 2: Configure Storage Settings

• Navigate to Storage > Storage Management.

• Ensure the hard drive(s) are correctly initialized and configured.

5. Remote Access Setup

Step 1: Enable Hik-Connect

• Navigate to Configuration > Network > Advanced Settings.

• Enable Hik-Connect and set up an account if you haven’t already.

Step 2: Port Forwarding (if necessary)

• Configure port forwarding on your router for the NVR’s IP address to allow remote access (commonly HTTP port 80, RTSP port 554, and server port 8000).

Step 3: Mobile App Setup

• Download the Hik-Connect app on your mobile device.

• Log in with your Hik-Connect account and add your NVR by scanning the QR code or entering the NVR’s serial number.

6. Final Steps

Step 1: Test the System

• Check all camera feeds on the monitor to ensure they are working correctly.

• Test remote access through the Hik-Connect app.

Step 2: Backup Settings

• Navigate to Maintenance > System Configuration and back up your configuration settings.

Troubleshooting Tips

• If a camera is not detected, ensure it is powered on and connected properly.

• Check network cables and connections if the NVR is not accessible remotely.

• Update firmware for both the NVR and cameras for improved stability and security.

This guide should help you set up your Hikvision NVR 5.0 system. For more detailed instructions, refer to the user manual or the Hikvision support website.

DAHUA XVR 4.0 Setup

XVR AiD — Fri, 05 Apr 2024 15:07:24 +0000

DAHUA XVR 4.0 Setup, Dahua Technology is a world-leading video-centric AIoT solution and service provider. With its ‘Dahua Think#’ corporate strategy, Dahua Technology focuses on two core businesses: City and Enterprise. The company firmly strengthens its technological strategies that include AloT and IoT digital intelligence platforms, comprehensively promoting the digital intelligence upgrading of cities and enterprises based on customer needs, and creating more value for the digital-intelligent transformation of various industries.

New GUI – Start Up Wizard (Device Initialization)

DAHUA XVR 4.0 Setup Description

This article will go over the Initialization process of the units with the New GUI.

Prerequisites

• XVR with 4.0 GUI

• Mouse

• Monitor

Video Instructions

Step by Step Instructions

1. When you first turn on the recorder you will be greeted with the region settings. Click on the drop down menu and select “United States” and click Next.

2. Select the proper time zone setting for your region.

3. You will now be prompted to input a password for the admin account.

4. For easier login you can create a pattern, you will need to enter it twice to confirm.

5. Enter your email in order to reset the admin password in case the password was forgotten, you may also setup security questions.

Note: This is the only method to reset the password for XVRs and NVRs. If you skip this step and forget your device’s password, you will need to replace the unit

6. The Auto-check for firmware is not yet implemented in the U.S. so you can just click on next.

7. Make sure the video standard format is set to NTSC and click on “Next”.

8. Here you can go in depth with the time settings. You may want to set up the DST (Daylight savings) so that it takes affect when the time comes.

9. The recorder will be set as a static default IP address you see on the screen. Input an open local IP address and gateway from you network. If you don’t know this information you can select DHCP (highlighted in the red box) in order to automatically receive an IP address from the router.

10. If you have the recorder properly connected to the router the P2P status will indicate “Online” and you can now remote in to the unit with our mobile app/PC app.

11. You can select the Encode settings for each camera by selecting the drop down menu on “Channel”.

12. Select the resolution and image quality for snapshots.

13. Select what you want to to when the hard drive fills up.

14. Here is you recording schedule, the green will indicate 24/7 recording and Yellow will be Motion recording.

15. Here is you Snapshot schedule, same color legend as recording,

16. Once all that is setup you will be greeted with the final Prompt! You are now finished Initializing you new recorder

New GUI- Add a Dahua Device

Description

This article will show you three different methods to add a dahua device to our New GUI recorders. We will be adding a dahua camera with all three methods.

Prerequisites

• Dahua Recorder with New GUI

• Dahua Camera

Video Instructions

Step by Step Instructions

Method 1:

This first method is extremely simple if all the cameras are still set to default credentials and settings. We will do a device search on the network and add them with a click of a button

• First go to Camera>Registration

• Click on “Device Search”, it will scan the network and pick up any cameras on it

• Check the box of the camera you are adding and click on “ADD” and you will see the camera populate on the bottom box

• Give it a few seconds and click on refresh to see if it was added properly. As you can see the status light is now green

Method Two:

The second method is used if there’s an existing camera and it’s password was changed. You will use device search to locate the camera and then go to manual add to change the password it’s being added with

• Do a Device Search to locate the camera. Check the camera and click on “Manual Add”

• A popup window will come up and most of the information will be populated. You will just need to change the password, click on save when you’re done.

• The camera will now be added

Method Three:

This last method is used when Device Search fails and cannot locate the camera on the network. You will need to type in the camera’s information manually.

• Click on Manual Add

• Input all the required information

• After manually inputting the information click on “Save”

• If the information was correct then the camera will be successfully added and have a green status light

New GUI – Account Setup

Description

This article will go over how to add a user on our New GUI devices

Prerequisites

• Recorder with New GUI

Video Instructions

Step by Step Instructions

1. Log into the web interface of the device

2. Click the Menu icon in the top left of the page

3. Select Account

4. Click Add User

5. The Add User menu will appear. Use this window to ill out full user details

• User Name

• Password

• Group – user can be set to a User account group for multiple user authority management

• User MAC – MAC address of the user for filtering/security purposes

• Memo – memo line for notes regarding user

6. In the Authority menu you can define the individual rights of the User using the System, Playback, and Monitor tabs as well as which channels the user can access

Select which features you wish the user to have then click Save

7. A message will confirm when the user is successfully added

New GUI – Schedule Record Setup

Description

Dahua NVRs and DVRs offer a variety of recording options. You can configure recording schedules based on the following methods:

• General

• Motion Detection

• Alarm Based

• Motion Detection + Alarm

• IVS if the feature is available depending on the model.

These schedules can be set individually for each camera or copied to all cameras.

Prerequisites

• Dahua NVR or DVR with 2018 firmware

• Internal HDD

Video Instructions

Step by Step Instructions

1. From the Main Menu select “Management”.

2. Select the “Storage” option from the drop-down menu.

3. From the left hand side, select “Schedule”.

4. Select the channel drop-down menu to choose the channel that you want to adjust the recording schedule for.

5. Select “Setting” next to any day of the week.

6. You will have options to set a schedule for General Recording, MD (Motion Detection), Alarm, MD & Alarm, Intel, and POS (Point of Sale). For this tutorial we are using General Recording.

7. Here you can see that you are able to set multiple periods. For this tutorial we will only be setting one period. Check the “General” box, then select the day or days you want to scheduled recordings for, and then select “Save”.

8. Depending on the days selected from the previous step, you will see green colored bars which represents general recording.

9. You can select “Copy” to mirror the same schedule to another channel/camera. Select “Save” in the Copy menu.

10. Select “Save” at the bottom to save all settings. If your changes were successfully saved, a pop-up will appear at the top notifying you as such.

New GUI – Motion Detection Recording Setup

Description

This article will go over Motion Detection Recording setup in detail on the recorder’s new GUI

Prerequisites

• Dahua Recorder with new GUI

• Dahua Camera

Video Instructions

Step by Step Instructions

1. On the main menu select Alarm

2. Select Video Detection on the left.
Then select the Motion Detection tab at the top.
Choose the channel from the drop-down next to Channel.
Check the box next to Enable.
Check the box next to Record Channel.
Click on Setting next to Region

3. Highlight the areas in red where you want to track motion.
Then click OK at the bottom

4. Select More at the bottom
Check the boxes next to any of the other options you want to activate when motion is detected.
Click on OK

5. Click on Apply at the bottom.
You will see “Operation Succeeded” at the top when your changes have been saved

6. Click on the Setting drop-down at the top and select Storage

7. Select Schedule on the left.
Then select the Record tab at the top.
Choose the channel from the drop-down next to Channel.
Click on the Setting button next to any day of the week.

8. Check the All box to enable all days of the week.
Check the Motion box for “Period 1”.
Click OK at the bottom.

9. Click on Apply at the bottom to save the settings

10. Select Record Mode on the left.
Then make sure Auto is enabled for the appropriate channel(s).
Click on Apply at the bottom.

11. Click on the Main Menu icon at the top right.
Then select Search

12. Check box next to the channel on the right.
You should see yellow lines/bars for motion recording

Alarm Record Setup

Description

This article is to show you how to setup alarm recording thru new Web GUI.

Note: please refer to product spec sheet for alarm input/output availability. Not all Dahua Recorder support alarm input/output.

Prerequisites

Video Instructions

Step by Step Instructions

Setup Alarm Input

From main menu, click on Alarm. Click on Alarm input. We are using XVR 72 series for this example. The Alarm Input page will launch as shown below:

Select the Alarm input number that you like to use. This number is correspond to the alarm port on the back of recorder.

1. Click Enable to enable the alarm input.

2. Enter Alarm Name. By default is set to AlarmIn#

3. Period is to schedule your Alarm when you want to be enable.

4. With the alarm input, you can trigger recorder’s alarm output.

5. This to select which channel you want recorder to start recording when alarm is triggered.

6. You can call basic PTZ action Preset, Tour, or Pattern when alarm is triggered.

Setup Alarm Recording Schedule

1. From the main menu, click on Management > Storage > Schedule.

2. Select the channel you like to setup.

3. To enable Alarm recording, Click on Setting next to the timeline bar.

4. Set your duration (By default is 24 hour, 00-24). Then select Alarm.

You can select all days to copy the schedule to all week. Click Save.

5. Click Save.

New GUI/Instructions/IVS Record

Description

This article will cover how to configure IVS Recording on a Dahua recorder with the New GUI

Prerequisites

• Dahua Recorder with IVS and Dahua Camera with IVS

Video Instructions

Step By Step Instructions

1. From the Main Menu select AI

2. Select Parameters on the left.
Then select Smart Plan below it.
Choose the channel of the camera you are configuring from the Channel drop-down.
Select the IVS “Lightbulb” icon so that it highlights blue.
Then click Apply at the bottom

3. Select IVS on the left.
Choose the channel of the camera from the Channel drop-down.
Then click the + button.
Double-click on the rule type under the Type column to choose the type of IVS rule you want to use.
Adjust all the settings in the Parameters section.
Make sure that the box is checked next to Record Channel and the channel that camera is on is highlighted next to it

4. Draw the rule in the live view on the left by left clicking on it.
Continue to left click to add more segments.
When you are done, right click to finish drawing the rule.
Then click Apply at the bottom

5. Select Setting at the top left.
Then select Storage from the drop-down

6. Select Schedule on the left.
Then select the Record tab at the top.
Choose the channel of the camera from the Channel drop-down.
Then click on Setting to the right of any day of the week

7. Check the box next to All to select all days of the week.
Check the box for Intelligent to the right of Period 1.
(Feel free to adjust the days of the week and the time period for when you want to record IVS events).
Then click on OK

8. You will see blue bars on the schedule representing when IVS events will be recorded, when they are triggered.
Click Apply at the bottom

9. Click on the Menu icon at the top right to go back to the Main Menu.
Then click on Search

10. Check the box next to the camera channel on the right.
Once IVS events have occured they will appear as blue bars on the timeline at the bottom.
Click on the timeline on one of the blue bars to start playing that IVS event

New GUI – Audio Record Setup

Description

This article will go over setup for audio recording on our New GUI devices

Prerequisites

• Recorder with New GUI

• Supported camera with built in Microphone

• Supported microphone plugged into device and powered on

Note: Please reference the specification sheet for the device to confirm which audio features it supports, this can vary between models of recorder

Video Instructions

Step by Step Instructions

Enable audio source

1. 1. Login using a web browser.

2. Click on Setting > Camera.

3. Click on Encode. And then select the camera channel that support audio.

4. Click on More.

5. Click on the checkmark to enable Audio.

6. Select the Audio source for your HD-CVI camera. If your HD-CVI camera has built-in Microphone, select HDCVI as the audio source. Local option is if you are connecting external microphone to the recorder.

7. Click OK, and then click OK again on the bottom right hand corner.

Setup audio recording

1. Login using a web browser.

2. Main menu 1st screen.

3. Main menu 2nd screen.

4. Click on the Audio Option.

5. Audio File Manager Option.

New GUI – Playback

Description

This article will cover how to play back recorded video on an NVR or DVR with the New GUI

Prerequisites

• Dahua NVR or DVR with 2018 firmware

• Internal HDD

Video Instructions

Step by Step Instructions

1. From the Main Menu select “Video”

2. The Playback menu should open up and look like this:

3. On the right hand side, there will be a calendar. Select the day that you wish to play back video.
Below the calendar is a list of all the cameras/channels. Check the box next to all the cammeras/channels you would like to play back video from.

• Days that have a white dot underneath them have recordings.

4. The video footage willl appear on the timeline at the bottom of the screen. It will be color coded to match the types of video that were recorded.
(See the Legend at the bottom of the screen.)

5. Check or uncheck each type of recording that you want to view. Check the Sync box if you would like to sync playback up on all channels you are viewing.

6. Double click on the graph at the bottom to begin playing back video.

=How to back up video files on new UI

Description

This article is to show you how to back up the video file from new system UI.

Prerequisites

• Dahua North America device with new latest firmware

• Monitor connected to the device itself

• USB mouse to control system UI

Video Instructions

Step by Step Instructions

1. From the main menu, go to the second menu page, and click on Backup.

2. Backup page will launch as shown below:

3. You must plug in an external drive to save your downloaded file. Select the path where you want to save the file at. From this pop-up screen, you have an option to create new folder. After you select, click OK.

4. Select the Record Channel you like to search. You can only search 1 channel at a time.

5. Select the Recording Type you like to search.

6. Set the start and end time for searching. Then click Search. All recorded files that meets your search criteria will shown on the list.

7. Select the files, and click Backup.

8. Downloading process start.

9. Once finished, the folder information will pop up, then click OK.

New GUI – P2P Setup

Description

This article will go over initializing P2P on our New GUI devices

Prerequisites

• Recorder with New GUI

• Internet Access to the recorder

Video Instructions

Step by Step Instructions

1. Under “Management” go to Network>TCP/IP

2. You can either set the device on a static ip or turn DHCP on to automatically grab an IP from the network. Save any changes

3. Locate P2P tab on the lower left and enable P2P

4. After saving it you should see the the status change to “Online”, You can now use this device for remote viewing on our software

• If you run into any issues getting the P2P to show online, reboot the device and try again. If that still doesn’t work you may have a firewall on the network that is blocking the connection to the P2P servers

Remote Access/Remote Access Setup Port Forwarding

Create port forwarding rule in the router

Description

Port forwarding is a function of network routers that allows a user to configure specific communication ports to be routed to devices on an IP (Internet Protocol) network, such as a computer, DVR, or IP camera.In this case for CCTV equipment, it allows the user to view and control CCTV equipment remotely. Follow the step by step instructions and the instructions your manufacturers hardware to setup port forwarding, or try PortForward.com to search for your routers settings.

Prerequisites

• Network Video Recorder

• Connection to the internet

• Access to the router(s) and/or modem

• A computer that can access the network

Video Instructions

Step by Step Instructions

1. Connect NVR to network with a CAT5 cable.

2. Download and install ConfigTool from DahuaSecurity.com, under Support->Download Center->Software

3. Run the ConfigTool.

4. The ConfigTool should display your IP Camera. Click the, “” icon to open Internet Explorer and access your NVR.

5. Configure Internet Explorer security settings to allow the plugs to work. Link to Internet Explorer Setup

6. Login with the default credentials: User Name: admin Passsword: admin

7. Under, Main Menu -> Setup -> TCP/IP Change the IP Camera to, “Static” if the camera is currently set to, “DHCP”

8. Open another tab and enter the, “Gateway” address listed under your NVR’s Network settings. Example: 192.168.1.1, 192.168.0.1, 10.0.10.1

9. Login to your gateway and locate the, “Port Forwarding” section.

10. Create port forwarding rules for each port you wish to forward for the NVR. (Usually you will only need to forward the HTTP and the TCP port.) Default Ports: TCP: 37777 UDP: 37778 HTTP: 80 RTSP: 554 HTTPS: 443

11. The end result should look like the below image. We used a Cisco router for this example.

12. Hit, “Save” in the gateway interface, and open another tab.

13. Go to, “www.canyouseeme.org” and check that the ports you opened on the gateway.

How to Access System Using P2P via Mobile Application

Description

View your recorder and cameras on the go. With Dahua’s mobile application IDMSS(IOS)/GDMSS(Android) allows you to add Dahua recorders and cameras to the mobile app using P2P.

Prerequisites

• Smartphone (IOS device or Android)

• IDMSS/GDMSS already downloaded in your mobile device.

• P2P must be turned on from the recorder and connected to a network with internet access.

Video Instructions IDMSS/GDMSS version 4.50.000

Step by Step Instructions iDMSS/gDMSS version 4.50.000

1. Open iDMSS/gDMSS on the phone, and select the home icon located on the top left corner.

2. Select the “Device” button/icon on the bottom to add the recorder/camera.

3. Select the “+” sign then select “Scan” to add the device.

4. Select the “Wired Camera”.

5. Input the device for easy identification. It’s required to input the password for the added device then select the save icon located on the top right corner.

Step by Step Instructions IDMSS/GDMSS version 4.20.000

1. Select the Menu Icon

2. Select “Device Manager”

3. Select the Add Icon

4. Select “Camera”

5. Select “Wired Device”

6. Select “P2P”

7. Input Info and select “Start Live Preview”

• Name: (nickname)

• SN (serial number, you can either scan the QRcode or type the SN manually)

• Port (will auto populate after entering the SN)

• Username (Username of the recorder’s account)

• Password (Password for that Username)

• Live Preview (Extra=Substream, MAIN= Mainstream)

• Playback (Extra=Substream, MAIN= Mainstream)

Video Instructions IDMSS/GDMSS version 3.50.000

Step by Step Instructions IDMSS/GDMSS version 3.50.000

1. From the home screen of the mobile application select “Camera”.

2. Select the menu button.

3. Select Device Manager.

4. Select add button to add device.

5. Select Wired Device.

6. Select P2P.

7. Name your device -> tap the QR code to bring up QR code scanner.

• With your mobile device in hand, go to your local recorder, navigate to the P2P/Easy4IP settings and scan QR code to the right hand side. You will also see the SN (Serial Number) of the recorder underneath the QR code, you may use that to manually type in the SN into the SN field of the IDMSS/GDMSS mobile app. Note: you must have P2P/Easy4IP “enabled” from the local recorder with a status that either shows “online” or “connect success”.

8. Input the username -> password -> and select live preview. By selecting “Start live preview” device will be automatically saved into the application.

IDMSS/GDMSS Version 3.40.003

Video Instructions Version 3.40.003

Step by Step Instructions Version 3.40.003

1. Click, “Camera”

2. Select the Menu Icon

3. Select “Device Manager”

4. Select the Add Icon

5. Select “P2P”

6. Choose a name for the device → Scan in QR code for SN number which you can access from the physical recorder under the main menu → Setting → Network → P2P. You may input SN number manually which can also be found under the recorder. → Enter Username and Password. For best results , leave Live Preview and Playback on the Extra Stream.

7. Select the Disk Icon to save → Select Live Preview, At which time the app will connect to all cameras.

Setup Remote Access via P2P using SmartPSS

Description

This allows you to view cameras on SmartPSS using P2P.

Prerequisites

• SmartPSS
SmartPSS Download
How to Install SmartPSS

• SN Number of device located on bottom of device recorder. Can also be located from the local menu of the recorder under menu -> system info or from Dahua Web service under Setup -> Network -> P2P

• P2P must be enabled from the main menu of the recorder under Settings -> Network -> P2P or from Dahua Web Service under Setup -> Network -> P2P.

Video Instructions

Step by Step Instructions

1. Locate the serial number of your NVR or DVR. The serial number can be found at the following locations:

• On the underside or side of the unit

• In the web interface, under Info->Version

• On the system interface under Main Menu->Settings->Network->P2P

• On the system interface under Main Menu->Info->System->Version

2. Launch SmartPSS and select Device.

3. Click Add, change method to P2P.

4. Enter credentials, save and then add.

Uniview How To Guides 2024

XVR AiD — Sat, 23 Mar 2024 07:25:10 +0000

Uniview How To Guides 2024, This guide will focus on answering some frequently asked questions regarding the Uniview Security Systems and its features. If you have questions left unanswered by this guide, please don’t hesitate to reach out to our Tech Support team. If you are looking to configure or learn more about the various features and functionalities, please consider checking out our Uniview Setup: Everything You Need To Know.

Frequently Asked Questions

• How Do I Access My Uniview Security System?

• How Do I Start Recording And Scheduling?

• How Do I View Playback, Timeline, and Events?

• How Do I Monitor And Manage My Storage?

• How Do I Set Up Tamper Detection?

• How Do I Set Up Motion Detection?

• How Do I Set Up Face Detection?

• How Do I Set Up Line Crossing Detection?

• How Do I Set Up Intrusion Detection?

• How Do I Set Up People Counting?

• How Do I Adjust Image Enhancements, Exposure, Infrared, and Starlight?

• How Do I Adjust Resolution, Frame Rate, Bit Rate, and Video Compression?

• How Do I Name My Cameras and Manage On-Screen Display?

• How Do I Directly Transfer Footage From My Security System to My USB?

Note: These guides were written for Uniview NVR users who prefer to change settings remotely using a mobile or desktop browser (Internet Explorer). Remote and local configurations share many similarities and only the locations and availability of each feature may vary. The Uniview NVR Manual can provide more information if what you are looking for is not found in this simple guide or if you prefer local access by connecting a mouse and display to your NVR.

How Do I Access My Uniview Security System?

There are two ways to interface with your Univew Security System and to access all its features and configuration options you can choose to access it locally or remotely. Local access refers to connecting your Network Video Recorder to a display and a USB mouse. The monitor and the mouse will serve as the input-output for interfacing. Remote access refers to connecting to your Network Video Recorder through a browser (Internet Explorer provides the greatest compatibility) installed on a device that is in the same network as the Security System.

Local Access and First Time Setup

The NVR interface can be accessed directly by simply connecting the NVR to a display (this can be done with an HDMI or older VGA cable) and to a mouse. Once the display and the mouse is connected and the login screen is displayed, proceed to login. Since this is the first time, we will be using the default username and password (at the time of writing default login and password are admin and 123456) found on the manual that came with the NVR.

After logging in, Uniview’s privacy policy will be shown for you to review. Once you have reviewed and accepted, you will immediately gain access to the NVR and cameras connected to it. But, since it is the first time we are logged in and we are still using the default credentials, we will be prompted to change the login information. You will be using the new password for all your future access with the NVR.

Once the password has been changed, a pattern lock will also be prompted (this is optional and can be skipped). After doing so, the Privacy Policy will be displayed for the user to review. The screen that follows the Privacy Policy will let us connect our mobile devices to the NVR. This will grant access to Live View, alerts, and other configurations we may want.

The device QR code will be presented here. Allowing you access to the EZCloud feature. Devices can be added to the cloud manually but it is far easier to just use a link given from the QR code. If you want to pair the NVR with the EZView app, click here to read more about it.

The next step is to set or synchronize the time. This step will ensure that all scheduling configurations you will set and all alerts and alarm information will be accurate and will work based on your local time.

After this, you will be prompted to check the TCP/IP settings, the default settings will work for most people. If you need to specify networking (usually when DHCP is not enabled on other devices on the network), please do so here. You will still be able to alter this later.

Once the time and the password have been configured, you are now ready to enable and disable the features of the NVR.

To access the menu, you can right-click on any part of the screen and then click on Menu. It can also be accessed along with other options by moving your cursor to the bottom left of the screen. This will take you to the SETUP screen where you can enable and customize alerts, features, and other options available to you.

Remote Access and First Time Setup

You can also access the NVR interface through the use of a browser on a device connected to the same network as the NVR. To do this, you will need the IP address of the NVR you wish to connect to. The easiest way to find this on a Windows PC is with Uniview’s EZTools which can be downloaded here. Once installed on your computer, running the EZtools will automatically show you all connected Uniview devices.

The IP address can also be obtained by logging into your router and checking connected devices, using the command prompt (arp -a command and checking for new devices on the private network) or simply using another display for the NVR to check the current IP address of the device.

Note: Any browser should work to alter configurations, however using Internet Explorer will be the easiest to access the live view. (due to some newer browsers not supporting certain plugins).

From here, we can see the IP address given by our router to the NVR. 192.168.254.192. It will likely be different for you. Clicking on the Remote Web button will open your default browser and take you to the NVR interface.

You can then proceed to login to your Uniview NVR Interface. Since this is the first time, we will be using the default username and password found on the manual that came with the NVR. After logging in, Uniview’s privacy policy will be shown for you to review. Once you have reviewed and accepted, you will immediately gain access to the NVR and cameras connected to it. But, since it is the first time we are logged in and we are still using the default credentials, we will be prompted to change the login information. You will be using the new password for all your future access with the NVR.

Once the password has been updated, you will be greeted by the Live View display. Clicking on any of the cameras found on the left will show you live footage from it. In this case, a single IP camera is connected to the 4-Channel NVR.

From here, you can now click on SETUP to access all configurations and features and set them up to your preference.

Uniview How To Guides 2024

How Do I Start Recording And Scheduling?

Once properly installed and powered, most Uniview Security System immediately starts recording and saving footage to the Hard Disk Drive. To configure when and what types of footage you choose to save, you only need to navigate to the Recording Schedule tab.

Navigation: Setup > Camera > Schedule

1.Select which Camera to configure.

2.Select your preferred duration (in seconds) of the pre-record footage to be included in each saved recording.

3.Select your preferred duration (in seconds) of the post-record footage to be included in each saved recording.

4.Switch On the recording schedule feature.

5.You have two options for setting up the schedule.

• Click on Edit and a scheduling window will open.

• Click on the colored Event Types on the right side of the time table.

• Setup your preferred schedule scheme.

Pre-Record and Post-Record:

If the Pre-Record and Post-Record values are set to 60 seconds and 300 seconds respectively and using motion detection as a trigger, here is how it will play together:
.

• The camera is monitoring the road.

• At 10:26:30 PM, a running car entered the scene and left after 30 seconds at 10:27:00 PM, this triggers the motion detection event and fires up the recording.

• Footage from the camera from 10:25:30 PM which is 60 seconds prior to the event (determined by the Pre-Record) will be included in the saved recording data.

• Since our motion detection does not have a delay, let us determine that the motion detection event ended when the car left the scene at 10:27:00 PM.

• Since the Post-Record is set to 300 seconds or five-minutes after an event, the system will include footage from the camera up to 10:32:00 PM.

• When the security system owner checks the recorded events the next day, he will find footage of a motion detection event which starts at 10:25:30, 60 seconds before the car enters the scene, and ends at 10:32:00 PM, 300 seconds after the car left the scene.

• The final video will be 06:30 in length. 60 seconds pre, 30 seconds event, and 300 seconds post.

Event-Types:

• Normal: The NVR will continuously record all footage on this schedule.

• Event: The NVR will only record footage during an ongoing event.

• Motion: The NVR will only record footage when motion is detected.

• Alarm: The NVR will only record footage when an alarm is triggered.

• None: The NVR will not record any footage.

The setup that is shown on the screenshot above can be interpreted this way. During weekdays, from 7:00 AM to 5:00 PM, the system will monitor and record all footage into memory. The rest of the day, the system will not record anything unless a motion trigger or an alarm event is detected. During weekends, the system will not record anything except for motion-triggered events. During holidays, the system will not record anything unless an event is triggered.

How Do I View Playback, Timeline, and Events?

The Playback tab is found between the Live View and Setup tabs of your Uniview Web-Based Interface. As always, Internet Explorer would provide the widest range of options not available to other browsers.

Navigation: Playback

The playback sidebar is the first point of interest. The top drop-down allows you to filter what types of playback you wish to view. The options are as follows:

Normal: Default playbacks and scheduled recording sessions.

Tag: Shows a playback list that matches a tag keyword.

To utilize this feature, you will need to create tags on certain times you want to save for future reference. To do this, click on the time you want to create your tag and click on the Add Customized Tag button on the toolbar as shown here:

A window will open that allows you to name your tag and adjust the time.

After clicking OK, the new tag will be created. To search for tagged footage, change the filter into Tag, click on the Camera, specify the Keyword, set the time range to search between, and then click search as shown below:

This will display all tagged footage that matches the Keywords.

Event: Shows playback list for a matching event. Very similar to the above example but a simpler approach is only looking for footage of recorded events. To use this function change the filter to Event, choose a specific Event-Type from the drop-down list, select the Camera, specify the Time Range the system will search. Click search. This will display all events that match the Event-Type captured by the camera within the time range.

Smart: The system analyzes recordings for smart search results.

How Do I Monitor And Manage My Storage?

To monitor and manage your storage, you will need to access the Hard Disk group on the setup. The settings and their functions are explained below.

Navigation: Setup > Hard Disk > Hard Disk

Hard Disk

This tab shows you details of the current storage situation of your NVR. The total capacity and the available free space can be monitored from this tab alongside options to add and more storage.

• Refresh: Activating this option refreshes the list.

• Add: Allows for the addition of a connected hard disk.

• Format: Erases the data of a hard disk by formatting partitions.

• Configure: Allows you to determine the read/write properties of each drive.

Disk Group

This tab allows the creation and management of Disk Groups. A handy tool if managing a large number of Hard Disks and to simplify storage allocation.

Navigation: Setup > Hard Disk > Disk Group

• Disk Group: Allows the creation of disk groups.

The disk group feature allows us to assign hard disks to a disk group and use the disk group to store recordings and snapshots of specified cameras. Different arrays can be assigned to different disk groups. Redundant disks cannot be assigned to any disk group. Disk group information will be initialized if any disk in the group is formatted.

Allocate Space

This tab allows setting a maximum storage allocation for each camera on a disk group.

Navigation: Setup > Hard Disk > Allocate Space

• Select Camera: Select which camera to configure.

• Disk Group: Specifies which disk group to configure the camera for.

• Max Recording Space: Determines the allocated storage size in GB for video recordings.

• Max Image Space: Determines the allocated storage size in GB for image snapshots.

• Copy: Allows copying of configuration to selected cameras.

Advanced

This tab will determine what the Network Video Recorder will do once the Hard Disk Drives are full and new footage needs to be saved. Setting this to Overwrite should allow the NVR to delete older footage to make space for new ones to be saved while setting this to Stop will prevent any new recordings to be saved.

Navigation: Setup > Hard Disk > Advanced

• HDD Full: Determines whether to overwrite old recordings or stop once the HDD is full.

How Do I Set Up Tamper Detection?

To set up Tamper Detection, you will need to access the Tampering section of the Camera Setup.

Navigation: Setup > Camera > Tampering

• Navigate to the Tampering tab.

• Select which Camera to configure.

• Enable the Tampering Detection feature.

• Set the Sensitivity of the detection feature.

• Set when the feature will be active on Arming Schedule. In the screenshot above, the feature will be active at all times. If tampering is detected, it will create an event and trigger a set of actions specified on Trigger Actions.

• A handy tool to implement the current selected camera’s settings and configuration to other cameras is found on most configuration tabs.

◦ Parameter: Check which configuration areas you prefer to implement.

◦ Camera: Check which cameras you prefer to configure.

How Do I Set Up Motion Detection?

Navigation: Setup > Camera > Motion

• Navigate to the Motion tab.

• Select which Camera to configure.

• Enable the Motion Detection feature.

• Set the Sensitivity of the detection feature.

• Click on the Draw Area button to create an area on the screen you prefer the motion detection feature to monitor. You can have multiple areas on the screen or fill it entirely. The Clear All button removes all drawn areas.

• Set when the feature will be active on Arming Schedule. If the motion is detected, it will create an event and trigger a set of actions specified on Trigger Actions.

• A handy tool to implement the current selected camera’s settings and configuration to other cameras is found on most configuration tabs.

◦ Parameter: Check which configuration areas you prefer to implement.

◦ Camera: Check which cameras you prefer to configure.

How Do I Set Up Face Detection?

The Face Detection feature creates an EVENT when a person’s face is detected by the Video Content Analysis. It will then proceed to take screenshots of the person or persons detected.

Navigation: Setup > VCA > Face Detection

• Navigate to the Face Detection tab.

• Select which Camera to configure.

• Enable the Face Shot feature.

• Select whether to monitor the Full Screen or only a Specific Area.

• If Specific Area was selected as the Detection Area, click the Draw Area tool to create regions in the footage that will be monitored by this feature.

• Set the Sensitivity of the feature.

• Advanced: Allows further customization of the feature options if preferred.

• Face Detection Tab: Contains the options for scheduling and possible trigger actions.

• Set when the feature will be active on Arming Schedule. If a face is detected, it will create an event and trigger a set of actions specified on Trigger Actions.

How Do I Set Up Line Crossing Detection?

The Cross Line Detection feature creates an EVENT when an object crossed a specified line. This feature has 3 modes. A<->B which creates an event whenever an object crosses the line. A->B which only triggers when an object moves from side A to side B. B->A which only triggers when an object moves from side B.

Navigation: Setup > VCA > Cross Line Detection

• Navigate to the Cross Line Detection tab.

• Select which Camera to configure.

• Enable the Cross Line Detection feature.

• Click on the Draw Area tool to create lines that will be monitored by this feature. When drawing up the lines, choose the Trigger Direction which determines what direction the objects that cross the line should be headed to be counted. Set the Sensitivity of the feature.

• Set when the feature will be active on Arming Schedule. If a crossing is detected, it will create an event and trigger a set of actions specified on Trigger Actions.

How Do I Set Up Intrusion Detection?

The Intrusion Detection feature creates an EVENT when an object that meets the minimum size relative to the region (based on percentage) enters any of the specified regions and stays inside the region past the minimum time threshold.

Navigation: Setup > VCA > Intrusion Detection

• Navigate to the Intrusion Detection tab.

• Select which Camera to configure.

• Intrusion Detection: Toggles the feature on or off.

• Click on the Draw Area tool to create regions that will be monitored by this feature. When drawing up the lines, set Time Threshold which determines the minimum amount of time in seconds that the intruder is in the region for an event to be created, the Sensitivity which determines the sensitivity of the feature, and the Percentage which determines the minimum percentage of the region that should be covered by the intruder for an event to be created.

• Set when the feature will be active on Arming Schedule. If an intrusion is detected, it will create an event and trigger a set of actions specified on Trigger Actions.

How Do I Set Up People Counting?

The people counting feature is used to monitor the number of people entering or leaving an area.

Navigation: Setup > VCA > People Counting

• Navigate to the People Counting tab.

• Select which Camera to configure.

• Enable the People Counting feature.

• If Shoulder Demarcation is enabled, it adds resizable short parallel lines to the main people-counting line. Any passing person that is smaller than the demarcation will not be included in the count.

• Set the Sensitivity which determines the sensitivity of the feature.

• Set the Direction which determines which direction of people will the devices count.

• If enabled the Clear By Schedule clears the count found on the OSD at the time set on the next option. This does not affect the Statistics, only the values on the OSD.

• Set the Clear At which determines the time when the Clear By Schedule purges the OSD counting record. This does not affect the Statistics, only the OSD.

• Click on the Draw Area tool to create regions that will be monitored by this feature.

• Clear Counting Result: Activating this option will clear the OSD counting record immediately.

• Statistics: Allows viewing and generating tables and charts containing the counting records.

How Do I Adjust Image Enhancements, Exposure, Infrared, and Starlight?

Although fully-functional and is configured by default, you can specify desired image enhancements on the Image tab.

Navigation: Setup > Camera > Image

• Navigate to the Image tab.

• Select which Camera to configure.

• Select which Image Scene preset to use. Choose custom to create your own which you can configure by editing the values and fields on the dropdown lists right next to the preview.

• Default: Click this to restore the selected Image Scene to its default values.

How Do I Adjust Resolution, Frame Rate, Bit Rate, and Video Compression?

Adjusting the resolution, frame rate, bit rate, and compression of recorded footage can be done by navigating to the Encoding Tab.

Navigation: Setup > Camera > Encoding

• Navigate to the Encoding tab.

• Select which Camera to configure.

• Storage Mode: Select which stream to use for storing footage. By default, the mainstream is used for storage.

• Capture Mode: The options here are the presets you can use if preferred.

• Main/Sub/Third Stream: These sections allow greater configuration of each stream.

◦ Stream Type: Select your preferred stream type.

· Normal: main stream that is intended for scheduled recording.

· Event: main stream that is intended for recording triggered by events such as alarm inputs or motion detection alarms.

◦ Video Compression: Select your preferred video compression standard. The listed options depend on the standards supported by the camera.

· H.264

· H.264+

· H.265

· H.265+

◦

Resolution: Select your preferred resolution for the selected stream.

◦ Bit Rate Type: Select your preferred bit rate type.

· CBR: Constant Bit Rate is used to maintain a specific bit rate by varying the quality of video streams. It is preferred when limited bandwidth is available. The disadvantage is that video quality will vary and may decrease significantly with increased motion in the scene.

· VBR: When using Variable Bit Rate, video quality is kept as constant as possible, at the cost of a varying bit rate, and regardless of whether or not there is motion in the image. It is ideal when high quality is a requirement, especially when there is motion in the picture.

◦ Image Quality: This parameter is effective only when Bitrate Type is
set to VBR. 9 levels are provided.

◦ Bit Rate (Kbps): Select your preferred number of bits transferred per second. Select a value or select Custom and then set a value as needed.

◦

Range: Select the bit rate range. Currently the range is fixed.

◦ Frame Rate (fps): Select the number of frames per second.

◦ I Frame Interval: Number of frames between two adjacent I frames.

◦ I Frame Range: Range of I frames. Currently the range is fixed.

◦ Smoothing: Use the slider to control the sudden increase of bit
rate.

◦ Audio Stream: Enable or disable audio stream.

◦ Smart Encoding: The advanced mode achieves higher compression ratios.

• A handy tool to implement the current selected camera’s settings and configuration to other cameras is found on most configuration tabs.

◦ Parameter: Check which configuration areas you prefer to implement.

◦ Camera: Check which cameras you prefer to configure.

How Do I Name My Cameras and Manage On-Screen Display?

Navigation: Setup > Camera > OSD

• Navigate to the OSD (On-Screen Display) tab.

• Select which Camera to configure.

• Set the Camera Name. 0 – 40 Characters. Case-Sensitive.

• If enabled, Sync OSD Camera Name will lock the OSD Camera Name to the Camera Name.

• Set the OSD Camera Name if Sync OSD Camera Name is not enabled.

• In addition to the Camera Name, you can add more elements to your display:

◦ Show Time: Displays the current system time on the display.

◦ Show Name: Displays the camera name on the display.

◦ Count People: Displays the current value of the People Counting feature on the display.

◦ Date Format: Sets the date format used on the display.

◦ Time Format: Sets the time format used on the display.

◦ Font Size: Sets the font size used on the display.

◦ Font Color: Sets the font color used on the display.

◦ Content: This tab allows five more On-Screen display items should there be a need for it.

• A handy tool to implement the current selected camera’s settings and configuration to other cameras is found on most configuration tabs.

◦ Parameter: Check which configuration areas you prefer to implement.

◦ Camera: Check which cameras you prefer to configure.

How Do I Directly Transfer Footage From My Security System to My USB?

To transfer footage from the Network Video Recorder to your USB, you will need to create a video clip from the recorded footage, then save it to your USB.

• Plugin your USB device.

• Navigate to the Playback tab.

• Locate the recorded footage.

◦ Select the playback type.

◦ Select the video quality or event type.

◦ Select the camera.

◦ Select the date.

• For an advanced search, follow this guide.

• Select where you want to start the clip by clicking the time on the timeline.

• Click the Start Clipping button to mark the beginning of the clip.

• Select where you want to end the clip by clicking the time on the timeline.

• Click the Stop Clipping button to mark the end of the clip.

• The Save button, located next to the Start/Stop Clipping button, will now be enabled. Click it and choose the directory/folder where you want the clip to be saved.

How to use Webcam on Surveillance Station on QNAP NAS?

XVR AiD — Sat, 02 Mar 2024 08:12:51 +0000

How to use Webcam on Surveillance Station on QNAP NAS? This tutorial is only for QUSBCam. QNAP has released QUSBCam2, an app that allows USB cameras to be used as remotely manageable IP (ONVIF) cameras. QNAP recommends using QUSBCam2 to reduce CPU usage, improve system stability, and simplify your surveillance setup.

Overview

Video surveillance systems can sometimes be too expensive and difficult to maintain for general home users. By supporting webcam monitoring & recording, QNAP Turbo NAS offers an affordable and easy-to-use option for home and small office security. The Surveillance Station app on Turbo NAS is capable of 24/7 recording, taking screenshots, and allows you to remotely view live video streams and recorded files anytime, anywhere.

Webcam surveillance requirements

You will need a webcam with a built-in UVC (USB Video Class) driver. You may refer to the following lists for compatible webcams:

1.Logitech UVC Webcam List
http://support.logitech.com/en_us/article/6471

2.Linux UVC Webcam List
http://www.ideasonboard.org/uvc/

Please note:

1.These third-party sources should be used for reference only. QNAP cannot guarantee their full compatibility.

2.Supported resolutions and framerate are automatically detected based on the webcam hardware. The maximum resolution will always be used.

• ARM-based Turbo NAS: 640×480, 320×240, or 160×120 at 2FPS

• x86-based Turbo NAS: 960×720, 640×480, 320×240, or 160×120 at 5FPS

3.The maximum number of webcams supported by the Turbo NAS:

• ARM-based: one

• x86-based: one

How to use Webcam on Surveillance Station on QNAP NAS?

Read Also : Dahua XVR Remote Access Full Guide

Configure Surveillance Station for webcam recording

1. Connect a USB webcam

Connect a USB webcam to a USB port on the Turbo NAS. If the webcam is supported, it will be listed as a log showing a generic UVC camera in “Control Panel” > “System Settings” > “System Logs” on the NAS.

2. Install the QUSBCam QPKG from App Center (either Automatically or Manually)

Automatic installation: Install the QPKG from “App Center” > “Surveillance” > “QUSBCam” of the NAS.

Manual installation: Download the QUSBCam QPKG from the App Center on the QNAP website. Then you can install it by clicking the “Install Manually” button and by selecting the location of the QUSBCam QPKG to start installing.

3. Configure webcam in QUSBCam

First, open “QUSBCam”.

Video settings can be configured here.

4. Configure Surveillance Station

a. Install Surveillance Station

• Auto installation: Go to “App Center” > “Surveillance” > “Surveillance Station” and click “Add to QTS” to start installation.

• Manual installation: Download the Surveillance Station QPKG from the App Center on the QNAP website. Then you can install it by clicking the “Install Manually” button and by selecting the location of the Surveillance Station QPKG to start installing.

Please note: To ensure proper operations of Surveillance Station, we recommend rebooting the Turbo NAS after its installation is completed.

b. Configure the webcam on Surveillance Station with required settings: (Please check the detailed settings in QUSBCam, “HTTP URL” may vary by different situation.)

Please note: Before applying new settings, you can click “Test” on the right to check that the connection to your webcam is successful.

After you have added the USB webcam camera to your Turbo NAS, go to the “Monitor” page. If it is your first time accessing this page in your web browser, you will have to install an ActiveX control (QMon.cab) before using Monitor or Playback functions. Please follow the on-screen instructions to complete the installation. You can use Surveillance Station in Google Chrome, Mozilla Firefox and Microsoft Internet Explorer.

Play Video Files from Surveillance Station

Click or to enter the playback page and follow the steps below to play video files on the remote Surveillance Station.

1. Drag and drop camera(s) from the server/camera tree to the respective playback window(s) to select the channel(s) for playback.

2. Select a playback date using You can examine each channel to discover the time range when files were recorded using each camera. Blue cells indicate regular recording files. If it is blank, it means that no files were recorded at that time.

3. Click to begin playback. You can control the speed and playback direction by dragging the buttonto left or right of the shuttle bar.

4. Specify the time to play back the recording files. You can view a preview image on the timeline bar to search for the moment you want to play.

5. Click to control all the playback windows to play back the recording files. When this function is enabled, the playback options (play, pause, stop, previous/next frame, previous/next file, speed adjustment) will be applied to all of the playback windows.

How to Use QUSBCam2 with USB Cameras?

Overview

QUSBCam2 transforms USB cameras (webcam)(*1) into IP cameras with ONVIF compatibility and full support for the RTSP protocol. Its live view does not require any extra plug-ins in your browser, and it is a handy surveillance tool for homes and small offices.

• Requirements

• How to View a Live Stream on QUSBCam2

• Configure Surveillance Station for Webcam Recording

Requirements

• QTS 4.3 with QNAP Turbo NAS (x86)

• UVC compatible USB Camera (#1)

• Surveillance Station 5.1.0.5 (or later)

• CodexPack (for support h.264 format)

How to View a Live Stream on QUSBCam2

1.Install USB Camera
After connecting the USB camera to the NAS, the USB camera appears on the USB Device page.

2.Set as channel
After installing the USB camera, go to Channel List and click “Create Channel” to create a QUSBCam2 channel.

Set the channel name and video or audio configuration.
Note: Only MJPEG format supports the live function.

3.Check the Channel List
Go to Channel List and check if the thumbnail image of the USB camera is available. If you see the live button, it means that the camera supports the live function.

Configure Surveillance Station for Webcam Recording

Go to “Surveillance Station” > “Camera Configuration” and then click “Add”. Select “Search camera(s) automatically” and then click “Next”.

For Search type, select “ONVIF” and then select the QUSBCam2 camera. Click “OK”.

Surveillance Station automatically completes the camera information except for the user name and password. Use the same login credentials for the NAS that you are using.

Note: Before applying the new settings, you can click “Test” to check the connection to your QUSBCam2 camera.

Click to launch the QVR client to see the live video and recording.

Additional Information

QNAP does not guarantee full compatibility with all USB cameras. For details on compatible USB cameras (webcam), refer to the following lists for UVC (USB Video Class):

Logitech UVC Webcam List
http://support.logitech.com/en_us/article/6471

Linux UVC Webcam List
http://www.ideasonboard.org/uvc/

Dahua XVR Remote Access Full Guide

XVR AiD — Thu, 22 Feb 2024 18:25:26 +0000

Dahua XVR Remote Access Full Guide, Remote Access Setup Setup Remote Access via Portforwarding(IP) Locate Device on Network Browser Configure Internet Explorer to Access System Setup Remote Access via P2P-No Sign Up(Browser) Setup Remote Access via P2P-w/Account Sign Up(Browser) SmartPSS etup Remote Access via P2P(SmartPSS) DDNS DNS Setup etup Dahua DDNS etup No-IP DDNS etup Quick DDNS Other iew RSTP Stream via VLC -Way Talk Setup TP Setup end Snapshot via FTP UPNP Function PNP Setup POE Setup TP Multicast Setup