New GUI – Start Up Wizard (Device Initialization)

DAHUA XVR 4.0 Setup Description

This article will go over the Initialization process of the units with the New GUI.

Prerequisites

Video Instructions

Step by Step Instructions

1. When you first turn on the recorder you will be greeted with the region settings. Click on the drop down menu and select “United States” and click Next.

2. Select the proper time zone setting for your region.

3. You will now be prompted to input a password for the admin account.

4. For easier login you can create a pattern, you will need to enter it twice to confirm.

5. Enter your email in order to reset the admin password in case the password was forgotten, you may also setup security questions.

Note: This is the only method to reset the password for XVRs and NVRs. If you skip this step and forget your device’s password, you will need to replace the unit

6. The Auto-check for firmware is not yet implemented in the U.S. so you can just click on next.

7. Make sure the video standard format is set to NTSC and click on “Next”.

8. Here you can go in depth with the time settings. You may want to set up the DST (Daylight savings) so that it takes affect when the time comes.

9. The recorder will be set as a static default IP address you see on the screen. Input an open local IP address and gateway from you network. If you don’t know this information you can select DHCP (highlighted in the red box) in order to automatically receive an IP address from the router.

10. If you have the recorder properly connected to the router the P2P status will indicate “Online” and you can now remote in to the unit with our mobile app/PC app.

11. You can select the Encode settings for each camera by selecting the drop down menu on “Channel”.

12. Select the resolution and image quality for snapshots.

13. Select what you want to to when the hard drive fills up.

14. Here is you recording schedule, the green will indicate 24/7 recording and Yellow will be Motion recording.

15. Here is you Snapshot schedule, same color legend as recording,

16. Once all that is setup you will be greeted with the final Prompt! You are now finished Initializing you new recorder

New GUI- Add a Dahua Device

Description

This article will show you three different methods to add a dahua device to our New GUI recorders. We will be adding a dahua camera with all three methods.

Prerequisites

Video Instructions

Step by Step Instructions

Method 1:

This first method is extremely simple if all the cameras are still set to default credentials and settings. We will do a device search on the network and add them with a click of a button

Method Two:

The second method is used if there’s an existing camera and it’s password was changed. You will use device search to locate the camera and then go to manual add to change the password it’s being added with

Method Three:

This last method is used when Device Search fails and cannot locate the camera on the network. You will need to type in the camera’s information manually.

New GUI – Account Setup

Description

This article will go over how to add a user on our New GUI devices

Prerequisites

Video Instructions

Step by Step Instructions

1. Log into the web interface of the device

.

2. Click the Menu icon in the top left of the page

.

3. Select Account

.

4. Click Add User

5. The Add User menu will appear. Use this window to ill out full user details

6. In the Authority menu you can define the individual rights of the User using the System, Playback, and Monitor tabs as well as which channels the user can access

Select which features you wish the user to have then click Save

7. A message will confirm when the user is successfully added

New GUI – Schedule Record Setup

Description

Dahua NVRs and DVRs offer a variety of recording options. You can configure recording schedules based on the following methods:

These schedules can be set individually for each camera or copied to all cameras.

Prerequisites

Video Instructions

Step by Step Instructions

1. From the Main Menu select “Management”.

2. Select the “Storage” option from the drop-down menu.

3. From the left hand side, select “Schedule”.

4. Select the channel drop-down menu to choose the channel that you want to adjust the recording schedule for.

5. Select “Setting” next to any day of the week.

6. You will have options to set a schedule for General Recording, MD (Motion Detection), Alarm, MD & Alarm, Intel, and POS (Point of Sale). For this tutorial we are using General Recording.

7. Here you can see that you are able to set multiple periods. For this tutorial we will only be setting one period. Check the “General” box, then select the day or days you want to scheduled recordings for, and then select “Save”.

8. Depending on the days selected from the previous step, you will see green colored bars which represents general recording.

9. You can select “Copy” to mirror the same schedule to another channel/camera. Select “Save” in the Copy menu.

10. Select “Save” at the bottom to save all settings. If your changes were successfully saved, a pop-up will appear at the top notifying you as such.

New GUI – Motion Detection Recording Setup

Description

This article will go over Motion Detection Recording setup in detail on the recorder’s new GUI

Prerequisites

Video Instructions

Step by Step Instructions

1. On the main menu select Alarm

2. Select Video Detection on the left.
Then select the Motion Detection tab at the top.
Choose the channel from the drop-down next to Channel.
Check the box next to Enable.
Check the box next to Record Channel.
Click on Setting next to Region

3. Highlight the areas in red where you want to track motion.
Then click OK at the bottom

4. Select More at the bottom
Check the boxes next to any of the other options you want to activate when motion is detected.
Click on OK

5. Click on Apply at the bottom.
You will see “Operation Succeeded” at the top when your changes have been saved

6. Click on the Setting drop-down at the top and select Storage

7. Select Schedule on the left.
Then select the Record tab at the top.
Choose the channel from the drop-down next to Channel.
Click on the Setting button next to any day of the week.

8. Check the All box to enable all days of the week.
Check the Motion box for “Period 1”.
Click OK at the bottom.

9. Click on Apply at the bottom to save the settings

10. Select Record Mode on the left.
Then make sure Auto is enabled for the appropriate channel(s).
Click on Apply at the bottom.

11. Click on the Main Menu icon at the top right.
Then select Search

12. Check box next to the channel on the right.
You should see yellow lines/bars for motion recording

Alarm Record Setup

Description

This article is to show you how to setup alarm recording thru new Web GUI.

Note: please refer to product spec sheet for alarm input/output availability. Not all Dahua Recorder support alarm input/output.

Prerequisites

Video Instructions

Step by Step Instructions

Setup Alarm Input

From main menu, click on Alarm. Click on Alarm input. We are using XVR 72 series for this example. The Alarm Input page will launch as shown below:

Select the Alarm input number that you like to use. This number is correspond to the alarm port on the back of recorder.

1. Click Enable to enable the alarm input.

2. Enter Alarm Name. By default is set to AlarmIn#

3. Period is to schedule your Alarm when you want to be enable.

4. With the alarm input, you can trigger recorder’s alarm output.

5. This to select which channel you want recorder to start recording when alarm is triggered.

6. You can call basic PTZ action Preset, Tour, or Pattern when alarm is triggered.

.

Setup Alarm Recording Schedule

1. From the main menu, click on Management > Storage > Schedule.

2. Select the channel you like to setup.

3. To enable Alarm recording, Click on Setting next to the timeline bar.

4. Set your duration (By default is 24 hour, 00-24). Then select Alarm.

You can select all days to copy the schedule to all week. Click Save.

5. Click Save.

New GUI/Instructions/IVS Record

Description

This article will cover how to configure IVS Recording on a Dahua recorder with the New GUI

Prerequisites

Video Instructions

Step By Step Instructions

1. From the Main Menu select AI

2. Select Parameters on the left.
Then select Smart Plan below it.
Choose the channel of the camera you are configuring from the Channel drop-down.
Select the IVS “Lightbulb” icon so that it highlights blue.
Then click Apply at the bottom

3. Select IVS on the left.
Choose the channel of the camera from the Channel drop-down.
Then click the + button.
Double-click on the rule type under the Type column to choose the type of IVS rule you want to use.
Adjust all the settings in the Parameters section.
Make sure that the box is checked next to Record Channel and the channel that camera is on is highlighted next to it

4. Draw the rule in the live view on the left by left clicking on it.
Continue to left click to add more segments.
When you are done, right click to finish drawing the rule.
Then click Apply at the bottom

5. Select Setting at the top left.
Then select Storage from the drop-down

6. Select Schedule on the left.
Then select the Record tab at the top.
Choose the channel of the camera from the Channel drop-down.
Then click on Setting to the right of any day of the week

7. Check the box next to All to select all days of the week.
Check the box for Intelligent to the right of Period 1.
(Feel free to adjust the days of the week and the time period for when you want to record IVS events).
Then click on OK

8. You will see blue bars on the schedule representing when IVS events will be recorded, when they are triggered.
Click Apply at the bottom

9. Click on the Menu icon at the top right to go back to the Main Menu.
Then click on Search

10. Check the box next to the camera channel on the right.
Once IVS events have occured they will appear as blue bars on the timeline at the bottom.
Click on the timeline on one of the blue bars to start playing that IVS event

New GUI – Audio Record Setup

Description

This article will go over setup for audio recording on our New GUI devices

Prerequisites

OR

Note: Please reference the specification sheet for the device to confirm which audio features it supports, this can vary between models of recorder

Video Instructions

Step by Step Instructions

Enable audio source

1. 1. Login using a web browser.

2. Click on Setting > Camera.

|

3. Click on Encode. And then select the camera channel that support audio.

|

4. Click on More.

5. Click on the checkmark to enable Audio.

6. Select the Audio source for your HD-CVI camera. If your HD-CVI camera has built-in Microphone, select HDCVI as the audio source. Local option is if you are connecting external microphone to the recorder.

7. Click OK, and then click OK again on the bottom right hand corner.

Setup audio recording

1. Login using a web browser.

2. Main menu 1st screen.

3. Main menu 2nd screen.

4. Click on the Audio Option.

5. Audio File Manager Option.

New GUI – Playback

Description

This article will cover how to play back recorded video on an NVR or DVR with the New GUI

Prerequisites

Video Instructions

Step by Step Instructions

1. From the Main Menu select “Video”

2. The Playback menu should open up and look like this:

3. On the right hand side, there will be a calendar. Select the day that you wish to play back video.
Below the calendar is a list of all the cameras/channels. Check the box next to all the cammeras/channels you would like to play back video from.

4. The video footage willl appear on the timeline at the bottom of the screen. It will be color coded to match the types of video that were recorded.
(See the Legend at the bottom of the screen.)

5. Check or uncheck each type of recording that you want to view. Check the Sync box if you would like to sync playback up on all channels you are viewing.

6. Double click on the graph at the bottom to begin playing back video.

=How to back up video files on new UI

Description

This article is to show you how to back up the video file from new system UI.

Prerequisites

Video Instructions

Step by Step Instructions

1. From the main menu, go to the second menu page, and click on Backup.

2. Backup page will launch as shown below:

3. You must plug in an external drive to save your downloaded file. Select the path where you want to save the file at. From this pop-up screen, you have an option to create new folder. After you select, click OK.

4. Select the Record Channel you like to search. You can only search 1 channel at a time.

5. Select the Recording Type you like to search.

6. Set the start and end time for searching. Then click Search. All recorded files that meets your search criteria will shown on the list.

7. Select the files, and click Backup.

8. Downloading process start.

9. Once finished, the folder information will pop up, then click OK.

New GUI – P2P Setup

Description

This article will go over initializing P2P on our New GUI devices

Prerequisites

Video Instructions

Step by Step Instructions

1. Under “Management” go to Network>TCP/IP

2. You can either set the device on a static ip or turn DHCP on to automatically grab an IP from the network. Save any changes

3. Locate P2P tab on the lower left and enable P2P

4. After saving it you should see the the status change to “Online”, You can now use this device for remote viewing on our software

Remote Access/Remote Access Setup Port Forwarding

Create port forwarding rule in the router

Description

Port forwarding is a function of network routers that allows a user to configure specific communication ports to be routed to devices on an IP (Internet Protocol) network, such as a computer, DVR, or IP camera.In this case for CCTV equipment, it allows the user to view and control CCTV equipment remotely. Follow the step by step instructions and the instructions your manufacturers hardware to setup port forwarding, or try PortForward.com to search for your routers settings.

Prerequisites

Video Instructions

Step by Step Instructions

1. Connect NVR to network with a CAT5 cable.

2. Download and install ConfigTool from DahuaSecurity.com, under Support->Download Center->Software

3. Run the ConfigTool.

4. The ConfigTool should display your IP Camera. Click the, “” icon to open Internet Explorer and access your NVR.

5. Configure Internet Explorer security settings to allow the plugs to work. Link to Internet Explorer Setup

6. Login with the default credentials: User Name: admin Passsword: admin

7. Under, Main Menu -> Setup -> TCP/IP Change the IP Camera to, “Static” if the camera is currently set to, “DHCP”

8. Open another tab and enter the, “Gateway” address listed under your NVR’s Network settings. Example: 192.168.1.1, 192.168.0.1, 10.0.10.1

9. Login to your gateway and locate the, “Port Forwarding” section.

10. Create port forwarding rules for each port you wish to forward for the NVR. (Usually you will only need to forward the HTTP and the TCP port.) Default Ports: TCP: 37777 UDP: 37778 HTTP: 80 RTSP: 554 HTTPS: 443

11. The end result should look like the below image. We used a Cisco router for this example.

12. Hit, “Save” in the gateway interface, and open another tab.

13. Go to, “www.canyouseeme.org” and check that the ports you opened on the gateway.

How to Access System Using P2P via Mobile Application

Description

View your recorder and cameras on the go. With Dahua’s mobile application IDMSS(IOS)/GDMSS(Android) allows you to add Dahua recorders and cameras to the mobile app using P2P.

Prerequisites

Video Instructions IDMSS/GDMSS version 4.50.000

Step by Step Instructions iDMSS/gDMSS version 4.50.000

1. Open iDMSS/gDMSS on the phone, and select the home icon located on the top left corner.

2. Select the “Device” button/icon on the bottom to add the recorder/camera.

3. Select the “+” sign then select “Scan” to add the device.

4. Select the “Wired Camera”.

5. Input the device for easy identification. It’s required to input the password for the added device then select the save icon located on the top right corner.

Step by Step Instructions IDMSS/GDMSS version 4.20.000

1. Select the Menu Icon

2. Select “Device Manager”

3. Select the Add Icon

4. Select “Camera”

5. Select “Wired Device”

6. Select “P2P”

7. Input Info and select “Start Live Preview”

Video Instructions IDMSS/GDMSS version 3.50.000

Step by Step Instructions IDMSS/GDMSS version 3.50.000

1. From the home screen of the mobile application select “Camera”.

2. Select the menu button.

3. Select Device Manager.

4. Select add button to add device.

5. Select Wired Device.

6. Select P2P.

7. Name your device -> tap the QR code to bring up QR code scanner.

8. Input the username -> password -> and select live preview. By selecting “Start live preview” device will be automatically saved into the application.

IDMSS/GDMSS Version 3.40.003

Video Instructions Version 3.40.003

Step by Step Instructions Version 3.40.003

1. Click, “Camera”

2. Select the Menu Icon

3. Select “Device Manager”

4. Select the Add Icon

5. Select “P2P”

6. Choose a name for the device → Scan in QR code for SN number which you can access from the physical recorder under the main menu → Setting → Network → P2P. You may input SN number manually which can also be found under the recorder. → Enter Username and Password. For best results , leave Live Preview and Playback on the Extra Stream.

7. Select the Disk Icon to save → Select Live Preview, At which time the app will connect to all cameras.

Setup Remote Access via P2P using SmartPSS

Description

This allows you to view cameras on SmartPSS using P2P.

Prerequisites

Video Instructions

Step by Step Instructions

1. Locate the serial number of your NVR or DVR. The serial number can be found at the following locations:

2. Launch SmartPSS and select Device.

3. Click Add, change method to P2P.

4. Enter credentials, save and then add.

.

.

 Specification Sheet – NVR – LV-N9508Q8E

 Specification Sheet – Camera – LV-PBK80804C

 Quick Start Guide – NVR – LV-N9508Q8E

 User Guide – NVR – LV-N9508Q8E

 Firmware – NVR – LV-N9608C8E LV-N9616D6E v3.5.31

 Client – LaView Net Client for Windows

 Client – LaView Net Client for Mac

 Video Player – VSPlayer for Windows

 Video Player – VSPlayer for Mac

 IP Portal – IP Search Portal (SADP) for Windows

 Plugin – Web Component for Safari / Mac

 Technical Support Articles

.

How do I connect my TVI system to my phone app?

Please follow these steps to setup your mobile device. You can watch the YouTube videos and follow along or follow the instructions bellow.

IPhone:

https://www.youtube.com/watch?v=zshaTac0ka8

Android:

https://www.youtube.com/watch?v=G1DtkrYLIas

LaView NET app:

*If using 4G/LTE with bad signal, you may not obtain a picture. Attempt using a strong signal.

LaView DVR User Guide

Read Also : Camius DVR installation and user guide

.

How do I download videos off my TVI System?

To download video footage you’ll need a flash inserted into one of the USB ports on the system. Then go to Main Menu>Export>Normal. Once in the exporting page, you’ll need to select the channel the video was recorded on along with the starting time and end time to search for footage.

Then click on “Search” at the bottom and you’ll have some video previews show up. You can select any of the previews and play it on the top right hand side. When you know what files you’ll need check mark the box on the upper left hand corner of the preview window and click on “Export” at the bottom. Once the export is done, you’ll now have all the files on your flash drive.

How do I format my HDD?

To format your HDD you’ll need to go to the Main Menu>HDD>General. Once in the HDD menu, check mark the box to the left-hand side of the HDD information. Then click on “Format” or “Int” at the bottom. Please note this will delete all information off the HDD.

How do I playback my recordings?

To playback videos go to Main Menu>Playback>Normal. In that section choose your camera(s) on the right-hand side. Then double click any of the days on the calendar with either a dark blue or red on them. This should automatically start playback for that day. Use the bar at the bottom to jump to a specific time during that day.

I have everything plugged in, but all I see on my screen is “No Video”

The system should automatically pick up cameras once they are connected and have power. Be sure to check the power source for the cameras. If the power is connected correctly there may not be enough power be supplied. Cup your hands over the lens and if the IR lights turn on, then the camera has enough power. If not, you may need to try a different outlet for the cameras.

I’m having issues connecting my DVR to my phone.

Possible Fixes:

1.Please go to Menu-Configuration-Network and under the General tab make sure enable DHCP is selected, if it is not enabled then select enable and apply. If you had to enable it, restart the NVR and try the P2P setup again.

2.If you are still having issues, make sure DDNS is NOT enabled(unchecked). If DDNS is checked, uncheck it and apply then go back to Platform Access and disable P2P and apply. Once both are disabled, do a power cycle and reboot the unit. After the unit restarts enable P2P again, and do another power cycle.

3.Go to Extranet Access, Platform Access or DDNS and make sure LaView P2P is selected then apply, also make sure “Enable Stream Encryption” is disabled.

4. If none of these work, then it could be a network issue. Try to restart your modem/router by unplugging it for about 45 seconds. Plug it back in and restart the NVR, then try to reconnect your system to the P2P account.

How do I find my system’s IP address?

To find your system’s IP address go to Main Menu>Maintenance>System Info>Network. The IPv4 Address at the top is your local IP. If your IP address is 0.0.0.0 or 192.0.0.64, this means your system is offline. There are a few causes from this, but usually it’s a bad ethernet cable or the cable is not plugged in properly to either the DVR or Router. If those are checked to be correct, try restarting your router by unplugging it for a minute and restarting the DVR.

Which mobile app do I need?

-If you have DVR starting from LV-N52xxxx please download “LaView Patrol”

-If you have DVR starting from LV-N9xxxx, LV-D11xxxx, LV-D21xxx, or LV-T94xxxx, please download “LaView Net”

-If you have DVR starting from LV-D04xxxx, or LV-D51xxxx  please download “LaView Mobile”

My system keeps rebooting every few minutes. – LV-T93 units Only

You’ll need to upgrade the systems firmware to fix this issue. Try to upgrade the firmware immediately after the system has restarted to avoid a potential reboot during the upgrade process. Please follow the instructions below to do this.

Please download the firmware here: https://www.dropbox.com/s/yf6thpfyx04ag33/digicap.dav?dl=0

Once you have that file, put it on a flash drive and connect the flash drive to the DVR. Go to Main Menu>Maintenance>Upgrade and click on the Digicap file, then upgrade at the bottom. Once this is complete the system will reboot, and you’ll have the new firmware.

How do I find my system’s IP address?

To find your system’s IP address go to Main Menu>Maintenance>System Info>Network. The IPv4 Address at the top is your local IP. If your IP address is 0.0.0.0 or 192.0.0.64, this means your system is offline. There are a few causes from this, but usually it’s a bad ethernet cable or the cable is not plugged in properly to either the DVR or Router. If those are checked to be correct, try restarting your router by unplugging it for a minute and restarting the DVR.

I need to reset my password – LV-D04xxxxx

Please email us at info@laviewusa.com to reset the password for this system. In the email please mention you need a password reset along with the model number and date that displays on the main view of the system. A technician will reply with some instructions and a temporary password for your system.

How do I back up files off my DVR? – LV-D04xxxxx

To backup files on your DVR connect the USB drive to the USB port then go to Main Menu-Storage-Backup-Select USB device-Backup-Select “AVI”-Choose Start & End Time-Add-Select File-Start. Once the file has been backed up to the device please disconnect the USB drive.

How Do I set up recording on my DVR? – LV-D04xxxxx

Instructions:

2. Go to Main Menu>Configuration>Record>Record Plan>SET>Select period 1 for Normal(Continuous) or MD (Motion Detection) and then check the Select All box to copy the settings to the rest of the week. Click Apply then OK. If you’d like to set up a different schedule for each day, set the record plan for specific days individually.

3. Click the “Copy” button in the Record Plan section to copy the settings to all the other camera channels, press Apply and then Ok. All channels will have the same color scheme if this is done correctly.

How do I connect my DVR to my cell phone? – LV-D04xxxxx

Please use our point to point service. To get the P2P service working on the DVR go to Main Menu- Configuration- Network- make sure DHCP is checked (if not please check then click app. to apply). Then go to P2P under network and make sure that state says online (For model LV-KDT0808B7W go to Advanced-P2P service).

If it says the DVR is offline please check the Ethernet cable. Once P2P is confirmed online we will move to the LaView Mobile app that you can download from the Play Store or App Store. In LaView Mobile we will add a device with the “+ Device” then enter the Device ID and password shown in the P2P area. Make sure to save on the top right. Once you have your new device click on it then select 4 cameras and click the Play button. Live View should now start.

Please download the LaView Mobile app. Use the links below.

Android:
https://play.google.com/store/apps/details?id=com.vss.laview&hl=en

 Apple IOS:
https://itunes.apple.com/us/app/laview-mobile/id955357794?mt=8

For the Ipad use the HD version, this is for tablet use.
https://itunes.apple.com/us/app/laview-mobile-hd/id972423374?mt=8

LaView Mobile P2P Set Up
Note: The setup was done with an Android phone. The iPhone setup process is almost identical.

2. Click on the “+ Device” option.

3. Go to DVR, Main Menu>Configuration>Network>P2P then scan QR code or manually enter Device ID and password.

4. Press the “Save” button to be taken to the device list.

5. Select Device and select cameras. Press “Play” for Android or “Live” for iPhone to start live view.

.

How to Upgrade Firmware Using the Amcrest IP Config Tool

The firmware for your device can be upgraded manually using the Amcrest Smart Home IP Config tool. Before proceeding, please make sure your device is still connected to the same network as the device that is using the Amcrest IP Config tool. To download the Amcrest IP Config tool, clickhere

For more information on how to manually upgrade the firmware, please refer to the information provided below.

Step 1:Locate the .bin file for your specific device.

Step 2: Open the IP config tool, select your device and click Login.

Step 3: Enter the username and password for your device and click OK.

Step 4: Click on the Upgrade tab.

Step 5: Click Open File and access the .bin file and click Upgrade.

Allow the device to upgrade, the device will go offline and reboot. Once the reboot is finished the device will come back online (solid green LED) and you will be able to access the device again.

Load More :

• Amcrest NVR Troubleshooting
• How To Upgrade HDCVI firmware for Amcrest XVR

Wi-Fi Best Practices (Amcrest Smart Home)

Most Wi-FiAmcrest Smart Home devices have a communication distance of up to 164ft (open field) however if you notice the device is going offline regularly or becomes unresponsive your network and the location of the device may play a huge role in its ability to function properly. For more information on location and how it affects a Wi-Fi device, please refer to the information provided below.

Location: How far is the device is from the wireless router.

• Larger distances can be affected more by interference and be susceptible to connection issues. This can cause the hub to go offline which will also affect the sensors.
• Actual distances can vary drastically by the type of router. If connection issues arise, then a Wi-Fi extender should be considered.

Range Limiting Factors

Reflection: The signal reflects back.	Scattering: The signal scatters back into multiple new signals.	Refraction: The signal bends as it travels through an object (e.g. glass window).	Diffraction: The signal changes direction as it passes around an object.	Attenuation: The signal strength weakens as it passes through an object.

Wi-Fi signal strength decreases as it passes through different types of material. Try to position your wireless camera and receiver where the signal does not pass through metal or concrete blocks, which can significantly reduce signal strength (as shown in the information provided below).

Plastic & Wood: 10 – 30%

Brick: 30 – 50%

Concrete Cinder Blocks: 50 – 70%

Metal & Metal Cladding: 70 – 90%

Note: Signals that must pass through wet or moist materials (e.g. shrubs and trees) may be significantly reduced.

Using Amcrest Smart Home Products with Amcrest View Pro

Amcrest Smart Home devices such as deterrent cameras, doorbells, or other related Amcrest Smart Home devices, excluding battery cameras, are capable of connecting to both the Amcrest Smart Home app as well as the Amcrest View Pro app.

However, since Amcrest Smart Home devices function primarily on a cloud-based platform setting up an Amcrest Smart Home device to the Amcrest View Pro app will result in only live view being available and must be set up first using the Amcrest Smart Home app. If using push notifications, please make sure push notifications settings are established in the Amcrest Smart Home app, prior to adding the device to view pro. For more information on activating push notifications, click here.

For more information on how to add your specific device using the Amcrest Smart Home app, please refer to the Quick Start Guide for your specific device.

If you would like to view your Amcrest Smart Home devices using the Amcrest View Pro app, please refer to the information provided below.

Adding an Amcrest Smart Home Device to Amcrest View Pro

Please make sure your mobile device and Amcrest Smart Home device are connected to the same network during setup.

Step 1: Open the Amcrest View Pro app.

Step 2:  Tap on the Settings ( ) icon in the upper left corner and tap on Device Manager. Then tap on Add Device.

Step 3: Tap on Search Device. 

Step 4: Select your Amcrest Smart Home device from the Device List. Tap on Connection Type to continue.

Step 5: Tap on P2P Setup

Step 6: Enter a name for your camera in the Device Name field and enter the password for your device in the Password (default is admin) field. The password used in this field will be the password originally set for the camera in the Amcrest Smart Home app.  Tap Start Live View to continue.

Your Amcrest Smart Home device has now been added to your Amcrest View Pro app.

Note: Live view features such as, microphone, speaker, etc will be available in the Amcrest View Pro app. Other features such as playback, configuration, etc will not be available. To access and use these settings, please use the Amcrest Smart Home app.

How to Connect An Amcrest Smart Home Camera to the Amcrest View Pro App Using the Camera’s QR Code.

Amcrest Smart Home devices such as deterrent cameras, doorbells, or other related Amcrest Smart Home devices, excluding the AB2WFSET, are capable of connecting to both the Amcrest Smart Home app as well as the Amcrest View Pro app.

However, since Amcrest Smart Home devices function primarily on a cloud-based platform setting up an Amcrest Smart Home device to the Amcrest View Pro app will result in only live view being available and must be set up first using the Amcrest Smart Home app.

For more information on how to add your specific device using the Amcrest Smart Home app, please refer to the Quick Start Guide for your specific device.

Please note, the recommended set up method for adding an Amcrest Smart Home device to your view pro app will be using the built in Device Search option that can be found in the Amcrest View Pro app. For more information on how to add the device using the device search menu, click here.

However, if you would like to view your Amcrest Smart Home devices using the Amcrest View Pro app, and connect using the QR code that is found on your device, please refer to the information provided below.

Please make sure your mobile device and Amcrest Smart Home device are connected to the same network during setup.

Step 1: Open the Amcrest View Pro app.

Step 2:  Tap on the Settings ( ) icon in the upper left corner and tap on Device Manager. Then tap on Add Device.

Step 3: Tap WiFi Camera and select the Add Connected Device tab. Tap P2P Setup. 

Step 4: Locate the QR code found on your device and scan the QR code.

Step 5: The information found in the S/N will need to be updated. Please remove the extra wording found in this field and verify the serial number is entered correctly. The serial number will start as “Z” followed by 13 characters (letters and numbers. This information can be verified on the serial tag of the device as well if needed. Tap Next.

Note: If you do not remove the additional wording it will result in a failure to connect as the serial number for the device is registering as invalid. Please make sure the correct serial number is being entered into the app before tapping Next.

Step 6: Enter a name for your camera in the Device Name field and enter the password for your device in the Password (default is admin) field. The password used in this field will be the password originally set for the camera in the Amcrest Smart Home app.  Tap Start Live View to continue.

Your Amcrest Smart Home device has now been added to your Amcrest View Pro app.

Note: Live view features such as, microphone, speaker, etc will be available in the Amcrest View Pro app. Other features such as playback, configuration, etc will not be available. To access and use these settings, please use the Amcrest Smart Home app.

SDK Programming Guide For Amcrest Smart Home

To download the latest SDK for your device please click on the link provided below.

Amcrest_SDK_Programming_Guide.pdf

How To Externally Format a MicroSD Card to FAT32

How To Externally Format a MicroSD card 

If you are unable to format your microSD card using the Amcrest Smart Home app you can also format it using the GUI format tool provided in the link below.

• GUI Format Tool.exe
  (80 KB)

Note: A microSD adapter or USB microSD card reader will be required to read the MicroSD card on your computer. Mac users, click here.

Step 1: Download and load the GUI Format Tool.

Step 2: Insert your SD card into your computer and allow the program to read the card.

Note: Uncheck the Quick Format checkbox if you would like a full format of the SD card. Formatting the SD card will remove all information and data from the card and format the card to FAT32.

Step 3: Click Start in the FAT32 Format menu and allow the program to format the card. Click OK to continue.

 Step 4: Allow the program to finish formatting the SD card. When finished, click the Close button to close the program.

The microSD card has now been properly formatted to FAT32. Remove the microSD card and insert it into your device.

Amcrest Smart Home App Icons Explained

See below for a chart that details what each icon of the Amcrest Smart Home app:

How to Disable the Indicator Light on Your Amcrest Smart Home Camera

The Indicator light on your camera can be disabled or enabled using the Amcrest Smart Home app. For more information, please refer to the information provided below.

Step 1: Log in to the app and access your device.

Step 2: Tap on the Settings icon.

Step 3: Scroll down to the Indicator Light toggle switch and tap to disable it.

Note: If your device does not have an indicator light toggle switch, tap on Video Settings, then slide your finger on the carousel and locate the Indicator Light icon. Tap the Indicator Light icon to disable the indicator light. To enable the indicator light, tap the icon again.

How to Recover a Password for Your Amcrest Smart Home Account

If you have forgotten the password for your Amcrest Smart Home account and would like to recover the password, please refer to the information provided below. Please note, during the process, a verification code will need to be sent to the email address used for your Amcrest Smart Home account. Please make sure you have access to this email address before starting the password recovery process.

Step 1: Open the Amcrest Smart Home app and tap Forgot Password.

Step 2: Enter the email address for your Amcrest Smart Home account and tap Send Verification Code.

Step 3: Navigate to your email and locate the verification code email. Enter the verification code into the app and tap OK.

Note: There is a 60-second window to enter the verification code into the app. If a new verification code is needed, tap on the Resend button to allow the app to send another verification code to your email.

Step 4: Enter a new password into the app and confirm the password in the next field. Tap OK.

The new password has been applied to your Amcrest Smart Home account. Please remember this password as it will be required to access your Amcrest Smart Home account.

Accessing Amcrest Smart Home Products Using RTSP

Some applications or viewing tools can use Real Time Streaming Protocol or RTSP to pull a device’s stream. This requires a specifically formatted URL. Please note, not all Amcrest Smart Home devices, such as the AB2WFSET will be compatible with RTSP streaming.

URL: rtsp://admin:password@IPAddress:554/cam/realmonitor?channel=1&subtype=0&authbasic=64

Please note, the admin and password portions of the URL will be the username and password of the CAMERA not the username and password of the account. 

RTSP URL Breakdown

The bracketed items are variables that you need to input according to your setup. Explanations of each variable are given below.

rtsp:// – The RTSP protocol

[admin] – username of the camera/device
[password] – password of the camera/device
[IP address] – IP address of the camera/device. If you are not on the same local network, this should be the external IP address of the device’s network.
[port] – RTSP port number

[channel] – channel number of the stream

[stream] – main or sub stream (use “main” (01) for main stream and “sub” for substream (0)

[authbasic] – basic authentication for the stream (64).

Using VLC Media Player to Access an Amcrest Smart Home Device on RTSP?

Before proceeding, please ensure the device is properly added to the Amcrest Smart Home app, powered on, and the computer you are using is on the same network as the device. For information on how to set up your device on the Amcrest Smart Home app, please refer to the quick start guide provided with your specific device.

Step 1: Download the Amcrest IP config tool. To access the Amcrest IP config tool, please visit: http://amcrest.com/downloads

Step 2: Open the Amcrest IP config tool and locate the IP address for your Amcrest Smart Home device.

Please note, the IP address represented in the above image is for reference purposes only. The IP address for your specific device may be different depending on the network.

Step 3: Lauch the VLC Media Player

Step 4: In the toolbar, click on Media, then click on Open Network Stream to display the open-source window.

Note: The open network stream menu can also be opened by pressing Ctrl-N while the VLC player is opened.

Step 4: Enter the RTSP protocol into the Network Protocol field and fill in the information into the URL.

rtsp://admin:password@IPAddress:554/cam/realmonitor?channel=1&subtype=0&authbasic=64

Click Play.

You can now begin streaming your camera live.

How to Register an Amcrest Smart Home Account

How to Register an Amcrest Smart Home Account

Registering an Amcrest Smart Home account is easy using the Amcrest Smart Home app. The Amcrest Smart Home app can be downloaded from the App Store or Google Play Store.

Registering an account allows you to begin adding your Amcrest Smart Home devices into the app. Please note, if you currently have a Zencam Security account already, registration to the Amcrest Smart Home app is not necessary as these accounts will share the same credentials. If you have a Zencam account, simply download the Amcrest Smart Home app and enter your Zencam login information into the Amcrest Smart Home app to access your account.

For more information on how to register a Amcrest Smart Home account, please refer to the information provided below.

Step 1: Download the Amcrest Smart Home app from the App Store or Google Play Store and open the app. On the main screen, tap on Register.

Step 2: Select the region in which you reside and tap Next to continue.

Step 3: Enter a valid email address and tap the “I have read and agreed” check box. The “Send Verification Code” option will appear. This will be the code needed to register your account. Tap Send Verification Code.

Step 4: Check the email address you entered for the verification code. Enter the verification code into the app and tap OK to continue. Please note, the verification code will only be valid up to 15 minutes.

Step 5: Enter a password for your account into the app and confirm the password in the next field. Set a password with a combination of 8 – 32 letters and numbers. The password will be case sensitive. Tap OK to continue.

Your Amcrest Smart Home account has been registered successfully. You will now be able to begin adding devices to your account. For more information on how to add your specific Amcrest Smart Home device, please refer to the Quick Start Guide included with your device.

How to Download a MicroSD card Recording

How to Download a MicroSD Card Recording

Recordings in the Amcrest Smart Home app can be downloaded to your phone through the Amcrest Smart Home cloud or from a microSD card. For more information on how to download recordings from the Amcrest Smart Home cloud, click here.

A microSD card must manually be inserted into the device to retain and download motion events. For more information on how to download a microSD card recording, please refer to the information provided below.

Step 1: Log into your Amcrest Smart Home account and select your device from the Devices menu.

Step 2: Tap on “MicroSD Card”.

Step 3: Tap on the File List icon (  ) located in the Cloud playback interface.

Step 4: Select the recording you wish to download from the file list.

Step 5: Tap the download icon (  ) to download the recording.

The recording will begin to download.

A blue checkmark ( ) will appear next to the download icon once the recording has finished downloading. You can also share your recordings directly to other services on your smartphone via the share icon (  ) located in the middle of the download menu. Please note, the recording must be downloaded to the app first in order to share them.

Exporting the Recording to the Mobile Device

Recordings downloaded from the microSD card will be downloaded to the Downloads List folder. The Downloads List folder can be found in the Account menu.

Step 1: Exit the interface to access the main menu. Click Account.

Step 2: Click on Downloads List.

Step 3: Click on the Folder icon.

Step 4: Tap on the Export icon.

The event will be downloaded to the photo or gallery section on your phone.

How to Format a MicroSD card Using the Amcrest Smart Home App

How to Format a MicroSD card Using the Amcrest Smart Home App

A microSD card can be formatted using the Amcrest Smart Home app. This will clear all data on the microSD card and format the microSD card to FAT32. Formatting the microSD card is performed via the storage status menu in the app.

The storage status menu displays any current cloud or microSD card storage options applicable for your device. This option also allows you view current cloud subscriptions applicable to your device as well as format a microSD card right from your smartphone. For more information on how to format the microSD card, please refer to the information provided below.

Note: A microSD card can be formatted externally as well if needed. For more information on how to format a microSD card externally, click here.

Step 1: tap on the settings icon () on the live view screen. Tap on the Storage Status option located in the settings menu.

Step 2: The microSD card storage capacity will be displayed in this menu. If no microSD card is being read by the device the status will be “Disabled”. To format the microSD card, tap on “Format Storage
Device”.

How to Set a Motion Detection Schedule Using Amcrest Smart Home

How to Set a Motion Detection Schedule Using Amcrest Smart Home

A motion schedule allows you to set the device to begin recording motion detection events at a designated time. This is useful if you would like the device to only start detecting motion during specific times of the day. If you would like the device to record motion 24/7 you can leave the schedule as default. However, for more information on how to set a motion schedule, please refer to the information provided below.

Step 1: Log into the Amcrest Smart Home app and access your device.

Step 2: Tap on the Settings icon (  ).

Step 3: Tap on Motion Detection.

Step 4: Tap on Motion Schedule.

Step 5: Tap on the day of the week you wish to modify. If you are setting a schedule for multiple days of the week this can be done later in the interface.

Step 6: Tap on “Add Schedule“.

Step 7: Tap on “Start Time” and use the scroll option to select a time you want the motion schedule to start. Note: In this example we will be setting the start time to 6am (0600).

Step 8: Tap on “End Time” and use the scroll option to select a time you want the motion schedule to stop. In this example we will be setting the stop time to 5pm (1700). Tap on the back arrow ( Tap on “Repeat” to choose which days of the week you would like the motion schedule to apply. A green check mark will be displayed next to the active days. Tap on the back arrow (  ) to exit.

Step 9: Tap on “Repeat” to choose which days of the week you would like the motion schedule to apply.

A blue check mark will be displayed next to the active days.

Tap on the back arrow (  ) to exit.

Note: Motion schedules cannot overlap.

Step 10: Tap on the “Save” button to save your motion schedule. To add additional motion schedules, you can tap on Add Schedule and repeat the setup process.

Tap on the back arrow (  ) to exit.

How To Turn Off the IR LEDs

How To Turn Off the IR LEDs

Disabling the IR LEDs will result in night vision being disabled on your device. This function can be enabled or disabled using the Amcrest Smart Home app. Please note, certain Amcrest Smart Home devices, such as the Wi-Fi Doorbell camera and battery camera do not support this function. For more information on how to turn off the IR LEDs, please refer to the information provided below.

Step 1: Log into your Amcrest Smart Home account via the Amcrest Smart Home app.

Step 2: Select your device from the Devices menu.

Step 3: Tap on the Settings (  ) icon.

Step 4: Tap on Video Settings.

Step 5: Tap on the Night (  ) icon to turn the IR LEDs off and disable night vision.

Note: To turn the IR LEDs back on, tap on the Night (  ) icon again to enable night vision.

How To Delete a Device from the Amcrest Smart Home App

How To Delete a Device from the Amcrest Smart Home App

Deleting a device from the Amcrest Smart Home app will remove the device completely from your Amcrest Smart Home account. This is highly recommended if you are performing a factory reset on your device or need to remove the device from your specific account. For more information on how to delete a device from the Amcrest Smart Home app, please refer to the information provided below.

Step 1: Log into the Amcrest Smart Home app and select the device you want to delete from the Devices menu.

Step 2: Tap on the Settings (  ) icon.

Step 3: Scroll down to the bottom of the Settings page and tap on Delete Device.

Step 4: Confirm if you would like to keep or delete your cloud recordings after the device has been deleted. To keep the recordings, tap the “Keep Recordings” check box. Tap Delete to confirm.

The device has now been unbound and deleted from your Amcrest Smart Home account.

Unable to Get an SSID?

Unable to Get an SSID?

If you are having issues obtaining an SSID when adding your device into the Amcrest Smart Home app there may be a miscommunication happening between the app and your mobile device. This appears to be a more common situation among iOS users and we are currently working with Apple to device a solution. There is an easy fix you can use to resolve the issue. For more information on how to resolve this issue, please refer to the information provided below.

If the SSID for your Wi-Fi network is not pulling up in the app when attempting to add your Amcrest Smart Home device, close the app completely then power your mobile device off and back on again allowing it to restart.

Once your mobile device has finished restarting, ensure your mobile device is connected to the proper Wi-Fi network, open the Amcrest Smart Home app and continue to add your device as normal. The SSID for your network should populate allowing you to complete the setup process. For more information on how to properly add your device please refer to the included quick start guide provided with your device.

How To Verify/Update Firmware

How To Verify/Update Firmware

All firmware verification and updates will be available using the Amcrest Smart Home app. For more information on how to verify/update the firmware for your camera, please refer to the information provided below.

Step 1: Log into your Amcrest Smart Home account and select your device from the Devices menu.

Step 3: Once you are logged in, tap on the settings (  ) icon.

Step 4: In the settings menu,  locate the “Firmware Update” tab. If a firmware update is necessary there will be a red indication identifier prompting you that a firmware upgrade is ready. If there is not a red dot, you are operating on the most up to date firmware.

If you need to update the firmware, tap on the “Firmware Update” tab to proceed with the update.

Step 5: In the firmware update menu, you will notice the current version of firmware that is on your camera, and the latest firmware file that will be downloaded to your camera. To proceed with the update, please click on “Update”.

Step 6: You will then be promoted to upgrade the firmware. Tap Cloud Upgrade to begin. If you wish to cancel to process tap Cancel.

Step 7: The firmware file will begin to download from that point. Please wait for the download and upload of the file to complete its processes.

Once the process is complete, there see a prompt letting you know that the firmware has successfully updated, and the current version is now updated on your device.

How To Activate An Amcrest Smart Home Cloud Account

How To Activate An Amcrest Smart Home Cloud Account

Amcrest Smart Home cloud is an optional premium cloud storage option provided exclusively for Amcrest Smart Home products. Amcrest Smart Home products are not compatible with traditional Amcrest Cloud accounts and will require activation specifically through the Amcrest Smart Home app. For more information on how to activate an Amcrest Smart Home Cloud account, please refer to the information provided below.

Step 1: Log into your Amcrest Smart Home app and select the device you wish to activate.

Step 2: On the live view screen tap on Cloud Recordings.

Step 3: Tap on Activate Cloud Storage.

Step 4: Select a Cloud Storage plan from the list of cloud plans and tap Buy

Note: Currently, we only offer motion detection storage plans. Continuous recording plans are currently not available for Amcrest Smart Home cloud plans.

Step 5: Enter your billing information into the billing form. All plans will require a credit card to process the request.

After you have purchased your Smart Home cloud account you will be able to store and view your recordings all from the Cloud Recordings menu. Additionally, you can change your plan, update your payment method, as well as cancel a subscription right from the app.

Note: Any plan changes made to your account will only take place at the end of your current billing cycle.

How To Share/Remove a User

How To Share/Remove a User

Device sharing allows you to add specific Amcrest Smart Home users to share the live feed of your added device.  When you add a shared user, the shared user will have access to your camera and features such as live viewing, recording, playback, and two-way audio. If you would like to proceed with the device sharing process please follow the step by step instructions provided in this article.

Note: The maximum users allowed on a shared account is 6 users.

Step 1: Log into your camera via the Amcrest Smart Home app.

Step 2: Once you are logged in, access your device and select the settings (  ) icon in the upper right hand corner.

Step 3: In the settings menu, please click on “Device Sharing”.

Step 4: In the device sharing menu, tap on, “Add a Shared User”.

 

Step 5: In the Add Shared User menu, enter a registered Amcrest Smart Home account email you would like to share your device with. Once you have entered the email press the Save icon (  ) located in the upper right hand corner.

Step 6: Once you have pressed Save icon, you will be prompted whether or not you would like to add the shared user to your device. If you would like to proceed with the process, please press “OK“, if not, there is also an option to cancel the process.

Removing a Shared User

To remove the shared user from your device, tap on the “Remove” button.

Then tap on the Remove option to remove the shared user from your device.

The shared user can then log into their Amcrest Smart Home account and view the recently shared device by tapping on the device located in their devices menu.

How To View MicroSD Card Recordings

How To View MicroSD Card Recordings

Please ensure you are using a class 10 or above microSD card that does not exceed the storage limitation of your device. The microSD card must be formatted to FAT32. This may have to be done manually as most programs do not format to this allocation automatically. For more information on how to format your microSD card to FAT32, click here

When a microSD card is inserted into the device, all motion based recordings will be stored to it. Additionally, if you have a Amcrest Smart Home Cloud account, recordings will be stored both on the cloud and microSD card. To view recordings from the microSD card, open the Amcrest Smart Home app and access your device.

On the live view screen, tap on the “MicroSD Card” menu located at the bottom right of the screen.

In the MicroSD card menu you will notice a list of recordings. Recordings can be accessed and viewed based on the date the motion occurred and can be found by tapping on the calendar menu in the app.

Select which day you would like to access from the calendar. You will notice a list of events located in the event timeline. To view the event, tap on the play button. You can also use the timeline to adjust and view specific events based on that time.

Note: All motion detection recordings will occur back to back in the interface which allows the device to capture all events without the use of a cool down period.

How To Activate Push Notifications Using Amcrest Smart Home

Push notifications, are events sent to your phone which let you know a motion or other event has been detected by the camera. These actions can range from a motion event being detected by your device by a call coming through from someone using your Amcrest WiFi doorbell.

Note: If you are adding your device in the Amcrest View Pro app, please make sure to enable push notifications using the Amcrest Smart Home app directly, not the view pro app.

Activating Push Notifications

Push notifications should be on by default, however, can be turned enabled or disabled using the Amcrest Smart Home app. These settings are device based and can be disabled or enabled per device associated with your Amcrest Smart Home account. To turn push notifications on or off, log into your Amcrest Smart app and select the device and click on the settings icon.

Scroll down and locate the push notification toggle switch. This option allows you to enable or disable push notifications for your device.

How To Setup Alexa Using Amcrest Smart Home

How To Setup Alexa Using Amcrest Smart Home

Many of our Amcrest Smart Home devices, such as the Wi-Fi doorbell camera and other devices, are compatible with Amazon Alexa devices that support video streaming. To use Alexa with our devices the device must be setup first in the Amcrest Smart Home app before you can set it up in Alexa.

Note: The name of the device on your Amcrest Smart Home account will be the name used to view your device on Alexa.

Note: Certain Alexa devices such as the Echo Show 5 only support cameras up to 1080P resolution. Cameras set at a higher resolution above 1080P may experience issues connecting to Alexa.

For a brief guide on how to connect your Amcrest Smart Home camera to a supported Amazon Alexa device, please follow the instructions below:

Step 1: Ensure your Alexa device has completed its initial setup including synchronization with your Amazon account.

Step 2: Download the Amazon Alexa app from the Apple App store or Google Play Store and sign in using your Amazon Alexa account.

Step 3: Once you are logged into the app, from the Home menu, tap on the menu icon (  ) and tap “Skills & Games“.

Step 4: Tap on the search icon (  ) and search for “Amcrest Smart Home”. Download and install the Amcrest Cloud skill.

Step 5: Tap on Enable To Use.

Step 6: Enter the account credentials for your Amcrest Smart Home account and tap Sign In.

Step 7: Tap “Authorize” to authorize the connection.

Step 8: Your Amcrest Smart Home account has now been properly linked to Amazon Alexa. Please close this window to proceed.

Step 7: Tap on Discover Devices

Alexa will begin discovering your connected devices. This may take up to 45 seconds to complete.

Step 8: Tap on Set Up Device.

Step 8: You can then request Alexa to show you the camera by uttering a phrase. For example, if your device is named “Doorbell”, speak the phrase: “Alexa, show me the Doorbell camera.” The live stream of the device will be displayed.

As a reminder, the name of the camera on your Amcrest Cloud account will be the name used to view your device on Alexa.

Overview

Surveillance Station is a security monitoring application that allows you to manage IP cameras to safeguard your home and office environments. To link your IP camera to Surveillance Station, you first need to make some simple settings.

1. Launch IP Camera

To launch IP Camera, do either of the following:

• Launch Surveillance Station and click IP Camera.
  
• Launch Surveillance Station and go to Main Menu > IP camera.
  

2. Add a camera

To add a camera to Surveillance Station, choose one of the following options:

• If there are no connected cameras, click Add in the dialogue to activate Add Camera Wizard.
• In the top-left corner, click Add > Add Camera to activate Add Camera Wizard.
  

3. Set up the IP Camera

1. In Add Camera Wizard, choose between Complete Setup and Quick Setup. Complete Setup allows you to configure device information, video settings, recording settings, and schedule settings. With Quick Setup, you only need to set the necessary device information and can edit advanced settings in the Advanced page later.
   
2. Select a server.
   

3.1 Set up the camera information

1. Under Information, click the search icon to the right of IP address to open the Camera search result window. Surveillance Station will automatically search for connectable devices in the domain.
   
2. Select a camera and click OK. The device Name, IP address, Port, Brand, Camera model, default Username and Password¹, and other settings will be loaded automatically. You can also enter your device information and let Surveillance Station help you with the default user name, password, and other settings.
   
3. Some cameras also support Firmware, TV standard, Mount type, Video channel, and UPnP functions. To use the functions, make sure to enable them on your camera first.
   
4. Finish the Information setting, and click Test Connection to make sure Surveillance Station is connected to your device². If you are now connected to your device, a green check will appear and you can see the live feed in the box to the right³.
   
5. If you chose Complete Setup, more video settings will be shown in the next page. If you chose Quick Setup, Surveillance Station will complete the action with default settings.

3.2 Set up video settings

Adjust the Video format, Audio format, Streaming profile, Resolution, Frame rate, Bitrate control, and Image quality⁴. Depending on the camera, up to three streams can be set up simultaneously.

3.3 Set up recording settings

Adjust the Pre-recording time before an event and Post-recording time after an event. You can configure Keep the files within (days) and Limit the archive folder up to (GB) to manage recordings, and set up Customize archive folder names, Customize file name prefix, and Recording storage.

3.4 Set up a schedule

1. Determine what time to start continuous recording and what time to enable event detection⁵.
2. Click on the boxes above the timetable to choose a recording mode, and drag your mouse across the timetable to apply the settings.
   
3. Click Finish. Surveillance Station will try to set up the camera accordingly.

4. Make sure the camera is set up correctly

Once settings are complete, cameras will appear in the list with their status shown after the device name.

• It may take up to minutes for Surveillance Station to set up and connect to the camera. Meanwhile, the status will be “Activating“.
• If Surveillance Station cannot connect to your camera and obtain video streams, the status will read “Disconnected” and prompt possible reasons.
• If the camera is later connected, the prompt will be hidden while the video stream thumbnail appears. Click the thumbnail to access your camera and play the footage.

_____
¹ Always load the default username and password. If the username or password is changed, Surveillance Station may not be able to find your camera.
² Even if the test connection is successful, some cameras may not function properly. See this article for more information.
³ Some cameras do not provide snapshots, so snapshots may not be displayed properly.
⁴ If Bitrate control is set as Variable, you can choose the Image quality you want. If Bitrate control is set as Constant, you can adjust the bit rate.
⁵ After setting up your IP Camera, you can find Event detection and I/O Port in the left panel and edit settings.

Description

View your recorder and cameras on the go. With Dahua’s mobile application IDMSS(IOS)/GDMSS(Android) allows you to add Dahua recorders and cameras to the mobile app using P2P.

Prerequisites

• Smartphone (IOS device or Android)
• IDMSS/GDMSS already downloaded in your mobile device.
• P2P must be turned on from the recorder and connected to a network with internet access.

Video Instructions IDMSS/GDMSS version 4.50.000

Step by Step Instructions iDMSS/gDMSS version 4.50.000

1. Open iDMSS/gDMSS on the phone, and select the home icon located on the top left corner.

2. Select the “Device” button/icon on the bottom to add the recorder/camera.

3. Select the “+” sign then select “Scan” to add the device.

4. Select the “Wired Camera”.

5. Input the device for easy identification. It’s required to input the password for the added device then select the save icon located on the top right corner.

Step by Step Instructions IDMSS/GDMSS version 4.20.000

1. Select the Menu Icon

2. Select “Device Manager”

3. Select the Add Icon

4. Select “Camera”

5. Select “Wired Device”

6. Select “P2P”

7. Input Info and select “Start Live Preview”

• Name: (nickname)
• SN (serial number, you can either scan the QRcode or type the SN manually)
• Port (will auto populate after entering the SN)
• Username (Username of the recorder’s account)
• Password (Password for that Username)
• Live Preview (Extra=Substream, MAIN= Mainstream)
• Playback (Extra=Substream, MAIN= Mainstream)

Video Instructions IDMSS/GDMSS version 3.50.000

Step by Step Instructions IDMSS/GDMSS version 3.50.000

1. From the home screen of the mobile application select “Camera”.

2. Select the menu button.

3. Select Device Manager.

4. Select add button to add device.

5. Select Wired Device.

6. Select P2P.

7. Name your device -> tap the QR code to bring up QR code scanner.

• With your mobile device in hand, go to your local recorder, navigate to the P2P/Easy4IP settings and scan QR code to the right hand side. You will also see the SN (Serial Number) of the recorder underneath the QR code, you may use that to manually type in the SN into the SN field of the IDMSS/GDMSS mobile app. Note: you must have P2P/Easy4IP “enabled” from the local recorder with a status that either shows “online” or “connect success”.

8. Input the username -> password -> and select live preview. By selecting “Start live preview” device will be automatically saved into the application.

IDMSS/GDMSS Version 3.40.003

Video Instructions Version 3.40.003

Step by Step Instructions Version 3.40.003

1. Click, “Camera”

2. Select the Menu Icon

3. Select “Device Manager”

4. Select the Add Icon

5. Select “P2P”

6. Choose a name for the device → Scan in QR code for SN number which you can access from the physical recorder under the main menu → Setting → Network → P2P. You may input SN number manually which can also be found under the recorder. → Enter Username and Password. For best results , leave Live Preview and Playback on the Extra Stream.

7. Select the Disk Icon to save → Select Live Preview, At which time the app will connect to all cameras.