install firmware – XVRAID XVR-DVR-NVR CCTV DESK https://www.xvraid.com security and surveillance blog Sun, 01 Jan 2023 08:56:05 +0000 en-US hourly 1 https://wordpress.org/?v=7.1 https://www.xvraid.com/wp-content/uploads/2022/02/ipcam.png install firmware – XVRAID XVR-DVR-NVR CCTV DESK https://www.xvraid.com 32 32 Lorex Device Password Reset Guidelines https://www.xvraid.com/guide/lorex-device-password-reset-guidelines.html https://www.xvraid.com/guide/lorex-device-password-reset-guidelines.html#respond Sun, 01 Jan 2023 08:56:05 +0000 https://www.xvraid.com/?p=1245 Lorex Device Password Reset Guidelines If you restore your DVR / NVR system to default settings, the username and password will also be restored to default. If the default username and password above does not work, refer to your user manual for the model-specific default information for your system.

DVR / NVR: Default username and password

If you restore your DVR / NVR system to default settings, the username and password will also be restored to default.

Default login for most LHV / LNR Series systems:

  • Username: admin
  • Password: 000000

Default login for most LHA / LNK Series systems:

  • Username: admin
  • Password: 00000000

If the default username and password above does not work, refer to your user manual for the model-specific default information for your system.

If you are unable to log in to your DVR / NVR, client software or application due to a forgotten password, contact Technical Support for a password reset. For your security, passwords cannot be reset using the online support system.

Lorex Device Password Reset Guidelines

Read More : How to Motion Detection on Lorex Devices

Accessing Device Passwords on Your Lorex Cirrus App

If you forgot your device’s password on the Lorex Cirrus app, use these steps to regain access.

NOTE: The following instructions are shown using an iOS (Apple) smartphone. There may be some differences in the user interface when using an Android smartphone or tablet.

To access your device’s password on the Lorex Cirrus app:

1 Launch the Lorex Cirrus app on your smartphone or tablet.

2 Tap the settings button Settings icon on the top left corner.

3 Go to the Devices tab.

Devices tab

4 Tap the device name.

List of device names

5 In the selected device’s setting, tap the password reveal button to see your password.

Tap password reveal button

Follow these steps whenever you need access to your device’s password on the Lorex Cirrus app.

You can create multiple user accounts on the ECO Series DVR in addition to the default administrator account.

The following instructions require you to access your system using your DVR and a monitor.

To create a new user:

  1. Right-click on the Live View to access the Quick Menu.
  2. Click the Main Menu icon (main menu icon).
  3. Click System.
  4. Click the Users tab.eco system users
  5. Select a user to configure a new user account.REMINDER: There are six (6) configurable user accounts beneath the administrator account. Enable an user account to configure a new user.
  6. Click Edit.
  7. Configure the following:eco system users config
  • User Name: Enter a user name of your choice.
  • Password Enable: Select Enable.
  • Password: Enter a password of your choice.
  • Confirm: Re-enter the password.
  1. Click Apply to create the new user.
Read Next :
  1. How to change or reset your recorder’s password Lorex
  2. How to Lorex devices firmware updates

You can set permissions for any user on your ECO Series DVR. The administrator account is the only account that can modify user account permissions. By editing user permissions, you can enable or disable access to menus and functions.

The following instructions require you to access your system using your DVR and a monitor.

To edit user permissions:

  1. Right-click on the Live View to access the Quick Menu.
  2. Click the Main Menu icon (main menu icon).
  3. Click System.
  4. Click the Users tab.
  5. Select the user account you want to configure.
  6. Click Permission.
  7. Select the features that the user can access.ECO Series System Users Permissions
  8. Select the channels that the user can access with the selected features.ECO Series System Users Permissions
  9. Click Apply to save the settings, and then click Exit to close the window.

If your ECO Series DVR has a device ID, your mobile password is the same as your DVR password. Refer to your user manual for your default password.

If you DVR does not have a device ID, you can manually set your password. Depending on your model, you may require a separate password for smartphones and tablets in addition to the DVR password.

The following instructions require you to access your system using your DVR / NVR and a monitor.

To set up the mobile password:

  1. In your DVR, right-click on the Live View to access the Quick Menu.
  2. Click the Main Menu icon (main menu icon).
  3. Click Network > Mobile.ECO network mobile
  4. Enter a User Name and Password of your choice.
  5. Leave the Server Port at the default (default: 1025) unless you are required to use a different port.
  6. Click Apply to save the settings, and then click Exit to return to Live View.

You can change your recorder’s password for security reasons or reset it if you’ve forgotten it.

Important: These instructions are for recorders that are supported by the Lorex Cloud app.

Change or reset your recorder’s account password

  1. Retrieve your recorder’s Device ID. You can locate the Device ID in the following ways:
  • On the side panel of your recorder, alongside the Device ID’s QR Code.
  • In your recorder’s system, right-click then click Info.
  • In the Lorex Cloud app, go to Settings > Device Info.

Device Info

  1. Once you have the Device ID at hand, contact our technical support at 1-888-425-6739 and ask for a temporary password so that you can access your recorder and reset the password.
  2. Login to your recorder using the system username (default: admin) and the temporary password.

Right-click

  1. Right-click, then click Main Menu.

Main Menu

  1. Click Settings > System > Account > User.

Modify

  1. Under the admin username, click the pencil icon to Modify.
  2. Configure the following settings: Configure
    • Modify Password: Check to change or reset the password for the system.
    • Old Password: Enter the temporary password.
    • New Password: Enter your new, secure password.

Note: Passwords for the system must be a minimum of 8 characters, and must include at least 2 of the following character types: lowercase, uppercase, numeric, and special characters.

  • Confirm Password: Re-enter your new, secure password.
  1. Click OK to save your changes.

You can now use your new account password to login to your recorder.

The following article provides instructions on changing your Lorex recorder’s password for security reasons or reset it if you’ve forgotten it.

Important: These instructions are for recorders that are supported by the Lorex Home app.

Table of contents:

Change your recorder’s password (Lorex Home app)

Note: The recorder’s password can only be changed by the device owner. Shared users cannot change the password.

  1. Open your Lorex Home app.

Go to Device Settings

  1. Tap on your recorder’s device settings (•••) icon, then in the next screen tap it again.

Tap on the device name

  1. Tap on your recorder’s device name.

Tap Device Password

  1. Tap Device Password.
  2. Enter your current password in the Old Password field, then enter your New Password.

Note: Passwords for the system must be a minimum of 8 characters, and must include at least 2 of the following character types: lowercase, uppercase, numeric, and special characters.

  1. Tap Save.

You can now use your new password to login to your recorder.

Reset your recorder’s password (Lorex Home App)

Note: The recorder’s password can only be reset by the device owner. Shared users cannot reset the password.

  1. Open your Lorex Home app.

Go to Device Settings

  1. Tap on your recorder’s device settings (•••) icon, then in the next screen tap it again.

Tap on the device name

  1. Tap on your recorder’s device name.

Tap Device Password

  1. Tap Device Password.

Tap Forgot device password

  1. Tap Forgot device password.

Send reset intructions to your email

  1. Enter the email address associated with your account, then tap Send Reset Instructions.
  2. Get the temporary password from your email.
  3. Enter the temporary password in the Old Password field, then enter your New Password.

Note: Passwords for the system must be a minimum of 8 characters, and must include at least 2 of the following character types: lowercase, uppercase, numeric, and special characters.

  1. Tap Save.

You can now use your new password to login to your recorder.

Change your recorder’s password from the system (New Local UI)

Note: The recorder’s password can only be changed by the device owner. Shared users cannot change the password.

  1. Login to your recorder using the system username (default: admin) and your current password.

Click Main Menu

  1. From the Live View display, right-click to open the Quick Menu, then click Main Menu.
  2. Click Users, then the User tab from the side panel.

Users > User > Edit

  1. Under the admin username, click the pencil icon to Edit.
  2. Configure the following settings:

Modify Admin Account Password

  • Username: Select admin.
  • Modify Password: Click to enable changing the password for the system.
  • Old Password: Enter your current password.
  • New Password: Enter your new, secure password.

Note: Passwords for the system must be a minimum of 8 characters, and must include at least 2 of the following character types: lowercase, uppercase, numeric, and special characters.

  • Confirm Password: Re-enter your new, secure password.
  1. Click OK to save your changes.

You can now use your new password to login to your recorder.

Reset your recorder’s password from the system (New Local UI)

Note: The recorder’s password can only be reset by the device owner. Shared users cannot reset the password.

  1. Open your Lorex Home app.

Go to Device Settings

  1. Tap on your recorder’s device settings (•••) icon, then in the next screen tap on it again.

Tap on the device name

  1. Tap on your recorder’s device name.

Tap Device Password

  1. Tap Device Password.

Tap Forgot device password

  1. Tap Forgot device password.

Send reset intructions to your email

  1. Enter the email address associated with your account, then tap Send Reset Instructions.
  2. Get the temporary password from your email.
  3. Login to your recorder using the system username (default: admin) and your temporary password.

Click Main Menu

  1. From the Live View display, right-click to open the Quick Menu, then click Main Menu.
  2. Click Users, then the User tab from the side panel.

Users > User > Edit

  1. Under the admin username, click the pencil icon to Edit.
  2. Configure the following settings:

Modify Admin Account Password

  • Username: Select admin.
  • Modify Password: Click to enable changing the password for the system.
  • Old Password: Enter your current password.
  • New Password: Enter your new, secure password.

Note: Passwords for the system must be a minimum of 8 characters, and must include at least 2 of the following character types: lowercase, uppercase, numeric, and special characters.

  • Confirm Password: Re-enter your new, secure password.
  1. Click OK to save your changes.

You can now use your new password to login to your recorder.

Change your recorder’s password from the system

Note: The recorder’s password can only be changed by the device owner. Shared users cannot change the password.

  1. Login to your recorder using the system username (default: admin) and your current password.

Click Main Menu

  1. From the Live View display, right-click to open the Quick Menu, then click Main Menu.
  2. Click ACCOUNT, then click the User tab on the side panel.

Account > User > Edit

  1. Under the admin username, click the pencil icon to Edit.
  2. Configure the following settings:

Modify Admin Account Password

  • Username: Select admin.
  • Modify Password: Click to enable changing the password for the system.
  • Old Password: Enter your current password.
  • New Password: Enter your new, secure password.

Note: Passwords for the system must be a minimum of 8 characters, and must include at least 2 of the following character types: lowercase, uppercase, numeric, and special characters.

  • Confirm Password: Re-enter your new, secure password.
  1. Click OK to save your changes.

You can now use your new password to login to your recorder.

Reset your recorder’s password from the system

Note: The recorder’s password can only be reset by the device owner. Shared users cannot reset the password.

  1. Open your Lorex Home app.

Go to Device Settings

  1. Tap on your recorder’s device settings (•••) icon, then in the next screen tap on it again.

Tap on the device name

  1. Tap on your recorder’s device name.

Tap Device Password

  1. Tap Device Password.

Tap Forgot device password

  1. Tap Forgot device password.

Send reset intructions to your email

  1. Enter the email address associated with your account, then tap Send Reset Instructions.
  2. Get the temporary password from your email.
  3. Login to your recorder using the system username (default: admin) and your temporary password.

Click Main Menu

  1. From the Live View display, right-click to open the Quick Menu, then click Main Menu.
  2. Click ACCOUNT, then click the User tab on the side panel.

Account > User > Edit

  1. Under the admin username, click the pencil icon to Edit.
  2. Configure the following settings:

Modify Admin Account Password

  • Username: Select admin.
  • Modify Password: Click to enable resetting the password for the system.
  • Old Password: Enter the temporary password.
  • New Password: Enter your new, secure password.

Note: Passwords for the system must be a minimum of 8 characters, and must include at least 2 of the following character types: lowercase, uppercase, numeric, and special characters.

  • Confirm Password: Re-enter your new, secure password.
  1. Click OK to save your changes.

You can now use your new password to login to your recorder.

When using Lorex IP cameras, it is always recommended to connect them to a compatible NVR. NVR installations are easier to view, manage, and maintain than stand-alone IP cameras, and require just a single login to view all cameras connected to the system.

For those who must connect to IP cameras directly without the use of an NVR, the login information below is applicable to most Lorex IP cameras.

Default login for most Lorex IP cameras:

  • Username: admin
  • Password: admin

NOTES:

  • For security reasons, many new IP cameras with up-to-date firmware will ask you to change the default login information the first time you access the camera. In these cases, the default login information will not grant you access to the camera.
  • Older IP cameras may not use the default logins above. If the credentials above do not work, refer to your user manual for your camera’s default username and password. Click here for downloads and documentation for your product.

Default system port settings for Lorex IP cameras:

  • HTTP Port: 80
  • Client Port: 35000
  • UDP: 35001 (specific applications only)
  • RTSP: 554 (specific applications only)

If you have changed your IP cameras password and receive a Locked error message on your NVR, it is because your NVR is trying to access the cameras with an older password. When you change your password on your IP camera, update the password information on the NVR as well.

The following instructions require you to access your system using your DVR / NVR and a monitor.

To update your IP camera password on your NVR:

  1. Power cycle your IP camera. To power cycle your IP camera, please power it off and disconnect the power source for approximately 5 minutes. Reconnect, and power back on the IP camera.
  2. Right-click on the Live View of your NVR to access the Quick Menu, and then click Device Search.
  3. Log in to your NVR by entering your login information. Refer to your user manual for your default Username and Password.
  4. Click Device Search to search and display IP cameras connected to the local area network (LAN) or NVR in the Remote Device window.FLIR Cloud NVR: Change Password
  5. Select the camera you want to change the password for, and then click the Modify icon (FLIR Cloud NVR: Pencil Icon).
  6. Enter your updated password, and then click OK to save the settings.

RECOMMENDED: If you have power cycled your IP camera(s) and they are still showing a Locked error message, disconnect the camera(s) from power for 24 hours and repeat the steps above. You can also restore the camera to default settings. Refer to your user manual for model specific instructions on how to restore your camera. Click here for downloads and documentation on your product.

Your LHA / LNK Series DVR / NVR system supports two account types:

  • ADMIN / System Administrator
    • The system administrator has full control of the system, and can change both administrator and user passwords, and enable / disable password protection.
  • USER / Normal User
    • Normal users only have access to live viewing, search, playback, and other functions. You may set up multiple user accounts with varying levels of access to the system.

The following instructions require you to access your system using your DVR / NVR and a monitor.

To create a new user account:

  1. In the taskbar, click the Main Menu icon (home icon), and then click System > Users.
  2. In the Users tab, click one of the user accounts that is currently disabled.
  3. Click Edit.modify user account
  4. In the User Enable drop-down, select Enable.
  5. Enter the account User Name.
  6. Enter the account Password.
  7. Reenter the password to Confirm.
  8. Click Save to enable the user account.
  9. Click OK.

Multiple normal user accounts can be created, but there can only one system administrator account.

Your LHA / LNK Series DVR / NVR system supports two account types:

  • ADMIN / System Administrator
    • The system administrator has full control of the system, and can change both administrator and user passwords and enable / disable password protection.
  • USER / Normal User
    • Normal users only have access to live viewing, search, playback, and other functions. You may set up multiple user accounts with varying levels of access to the system.

Prerequisite:

  • Ensure you are logged in as the ADMIN / System Administrator.
  • The following instructions require you to access your system using your DVR / NVR and a monitor.

To change the password for the administrator or user accounts:

  1. In the taskbar, click the Main Menu icon (home icon), and then click System > Users.
  2. In the Users tab, click the account you want to change the password for.
  3. Click Edit.modify user account
  4. Modify the User Name and Password as required.
  5. If modifying the password, reenter the password to confirm.
  6. Click Save.
  7. Click OK.

The administrator account is the only account that can modify user account permissions. By editing user permissions, you can enable or disable access to menus and functions.

Prerequisites:

  • Ensure you are logged in as the ADMIN / System Administrator.
  • Have created at least one normal user account. Click here for instructions on how to add a user account.

The following instructions require you to access your system using your DVR / NVR and a monitor.

To edit user permissions:

  1. In the taskbar, click the Main Menu icon (home icon), and then click System > Users.
  2. In the Users tab, click one of the user accounts.
  3. Click Permission at the bottom of the window.Edit user account permissions
  4. Edit the user permissions to your preference. Check the boxes next to any system menus or capabilities you would like the user to access.User Permission
  5. Click Save to update permissions.
  6. Click OK.

For a password reset on your device, contact Technical Support. For security purposes, passwords cannot be reset using the online support system.

Before contacting technical support, you will need to provide the following information:

  1. Your Device ID
  2. Your Device Model Number
  3. The Date on the system

NOTE: If you have previously disabled the date, some systems will display the date after a few password attempts.

To access your device information refer to the article LHA / LNK Series: Accessing system information.

To modify your password:

1 Call Technical Support for the reset password.

NOTE: The reset password is valid for 24 hours.

2 Login to your system using the reset password.

3 In the Main Menu, press Users under the System tab.

4 Go to the user admin name that you want to modify the password for.

5 Press Edit to pop up the User Edit window.

System > Users

6 Enter your new system password.

7 Re-enter your new system password.

8 Press Save.

User Edit Window

This password will be used to connect to your system from now on.

Record your password and store it in a secure place.

Your LHB Series DVR system supports two account types:

  • ADMIN / System Administrator
    • The system administrator has full control of the system, and can change both administrator and user passwords, and enable / disable password protection.
  • USER / Normal User
    • Normal users only have access to live viewing, search, playback, and other functions. You may set up multiple user accounts with varying levels of access to the system.

The following instructions require you to access your system using your DVR / NVR and a monitor.

To modify your account username and password:

  1. In the taskbar, click the Main Menu icon (home icon), and then click System > Users.Modify User Window
  2. Click an enabled account that you would like to modify.TIP: Enabling additional user accounts
  3. Click Edit.User Edit
  4. Enter a new User Name for the selected account.
  5. Enter a new Password for the selected account.
  6. Re-enter the new Password to confirm.
  7. Click Save.
  8. Click OK.

You can create multiple user accounts on the LHV / LNR Series DVR / NVR in addition to the default administrator account.

The following instructions require you to access your system using your DVR / NVR and a monitor.

To create a new user:

  1. Right-click on the Live View to access the Quick Menu.
  2. Click Main Menu, and then click the Setting icon (Setting icon - crossed hammer and screwdriver)
  3. Click Setting > Account.
  4. Click Add User to open the Add User window.
  5. Configure the following:FLIR Cloud Series DVR / NVR: Add User Window
  • User Name: Enter a name of your choice for the user account.
  • Password: Enter a 6 character password for the user account, and then enter the password again when prompted to Confirm Password.
  • Memo (optional): Enter a description of the user account.
  • Group: Select the group you would like to assign to this user account. A user account cannot be given permissions its group does not have.
  • Multiuser: Select to enable or disable this user account from logging in from more than one computer, smartphone, or tablet at the same time.
  • Authority: Select the permissions you would like the user account to have.
    • System: select the menus the user account can access.
    • Playback: select the channels the user account can access recorded video from.
    • Covert: select the channels the user account can view live video from.
  • User MAC: Not supported. Leave this field blank.
  1. Click OK to save the settings.

Your LHV / LNR Series DVR / NVR password can be a combination of both letters and numbers, and can be only six characters in length.

IMPORTANT: If your password is longer or shorter than six characters, errors could occur when remotely accessing your DVR / NVR.

For a password reset on your device, contact Technical Support. For security purposes, passwords cannot be reset using the online support system.

Before contacting technical support, you will need to provide the following information:

 

  1. Your device ID
  2. Your device model number
  3. The date on the system

 

The Info window for your DVR / NVR system displays system information such as the IP address, MAC address, device ID, device model, and firmware version. You can access this screen through your PC / Mac client software or DVR / NVR menu.

To access your device information:
  1. Turn on your Lorex system.
  2. Note the date on the top right of your screen.

NOTE: If you have previously disabled the date, some systems will display it after a few password attempts.

  1. Press the Enter button or Info button located on your device.

If you cannot find these buttons, then proceed with the following steps:

  1. Click left to reveal the quick menu.
  2. Go to Info.

Info in Quick Menu

  1. Note the Device ID and the Device Model Number.

Info Settings

To modify your password:
  1. Call Technical Support for the reset password.

NOTE: The reset password is valid for 24 hours.

  1. Login to your system using the reset password.
  2. In the Main Menu, press Account.
  3. Press the Modify icon.

Account Settings > Modify

  1. In the Modify User settings, turn on Modify Password.
  2. In the Old Password field, enter the reset password.
  3. Enter your new account password.
  4. Re-enter your new account password.
  5. Press OK.

Modify User Settings

This password will be used to connect to your system from now on.

Record your password and store it in a secure place.

A password reset can be performed for the L-View Client software or LNC Series cameras.

LIMITATION: Technical support does not have access to passwords for software.

To reset the password for the L-View Client software:

  1. Uninstall the L-View Client software from your PC or Mac.
  2. Download and reinstall the L-View Client software. Click here for for more information on locating software downloads.

To reset the LNC camera password, restore the camera to default settings.

IMPORTANT: Restoring default settings will erase any configurations or WiFi network connection on the camera.

To reset the password on the LNC camera:

  1. With the camera on, hold the reset button on the camera for at least 10 seconds using a pin or small object.TIP: Location of the reset button can vary depending on the camera model. Refer to your user manual for the location of the reset button. Click here for downloads and documentation for your product.
  2. Once the camera is restored to default settings, launch the L-View Client software on your PC or Mac.
  3. If prompted, install firmware updates. The camera will restart.REMINDER: If you are not prompted to install firmware updates, manually update firmware using the L-View Client software.
  4. Once the camera restarts, connect the camera to WiFi using your computer. Click here for instructions on connecting the camera to WiFi using a PC or Mac.

You can create and delete multiple user accounts on the LNR200 / LNR300 Series NVR in addition to the default administrator account.

The following instructions require you to access your system using your NVR and a monitor.

To create a new user:

  1. Right-click on the Live View, and then click Menu.
  2. Click Configuration and then click User to display the User Management tab.lnr200.300.add user
  3. Click Add to display the Add User window.lnr200.300.add user
  4. Enter the User Name and Password of your choice.CAUTION: Do not change the User’s MAC Address.
  5. In the Confirm field, re-enter the password.
  6. Click OK to save the user account.

To delete a user:

  1. Right-click on the Live View, and then click Menu.
  2. Click Configuration > User to display the User Management tab.
  3. Click the Delete icon (delete icon) next to the user account you want to delete.
  4. Click Yes to confirm.

For security reasons, it is highly recommended to enable passwords on your system. The LNR200 / LNR300 Series NVR username and password are disabled by default and are not required to access system menus. However, you will be asked for a password to access certain functions or to log into the system remotely. Refer to your user manual for your default username and password. Click here for downloads and documentation for your product.

When passwords are enabled, the system will require passwords to access playback or system menus.

To enable passwords:

  1. Right-click on the Live View, and then click Menu.
  2. Click Configuration and then click General.
  3. Click the General tab.
  4. Check the Enable Password checkbox.enabling password
  5. Click Apply.

Your LNR200 / LNR300 Series NVR system supports two account types:

  • Admin / System Administrator
    • The system administrator has full control of the system, and can modify both administrator and user passwords and enable / disable password protection.
  • Operator / Normal User
    • Normal users have access to live viewing, search, playback, and other similar functions. You may set up multiple user accounts with varying levels of access to the system.

Prerequisite:

  • Ensure you are logged in as the Admin / System Administrator.

The following instructions require you to access your system using your NVR and a monitor.

To modify the admin account password:

  1. Right-click on the Live View, and then click Menu.
  2. Click Configuration and then click User.
  3. Click the Edit icon (edit icon) next to the Admin account.edit admin password
  4. In the Old Password field, enter the current administrator password.
  5. Select the Change Password checkbox.
  6. In the Password field, enter the new administrator password.
  7. In the Confirm field, re-enter the new administrator password.imagecdc980a24f7b48c08d59e1050e84b29d
  8. Click OK to save changes.

To modify user accounts:

  1. Right-click on the Live View, and then click Menu.
  2. Click Configuration and then click User.
  3. Click the Edit icon (edit icon) next to the user account you want to configure.
  4. In the User Name field, update the user name as needed.
  5. Select the Change Password checkbox to change the password.
  6. In the Password field, enter the new administrator password.
  7. In the Confirm field, re-enter the new administrator password.
  8. Click OK to save changes.

You can set permissions for any user on your LNR200 / LNR300 Series NVR. The administrator account is the only account that can modify user account permissions. By editing user permissions, you can enable or disable access to menus and functions.

The following instructions require you to access your system using your NVR and a monitor.

To modify user permissions:

  1. Right-click on the Live View, and then click Menu.
  2. Click Configuration and then click User to display the User Management tab.
  3. Click the Edit icon (edit icon) next to the user account you want to configure.
  4. In the Level drop-down, select the level you want to apply to the user account.
  5. Click OK to save changes.

Locking Your Lorex Cloud App

If you would like to put a lock on your Lorex Cloud app, follow these steps to secure your app.

NOTE: The following instructions are shown using an iOS (Apple) smartphone. There may be some differences in the user interface when using an Android smartphone or tablet.

To turn on the User Code:

1 Launch the Lorex Cloud app on your smartphone or tablet.

2 Tap the settings button Settings icon on the top left corner.

3 Go to the Local Config tab.

Local Config tab

4 Tap User Code.

User Code Settings

5 Turn on User Code.

User Code On

6 Enter a 4-digit code.

Please enter your user code

7 Re-enter the 4-digit code to confirm.

Your User Code is now activated to access the Lorex Cloud app.

To turn off the User Code:

Follow the steps above from 1-4.

  1. Tap off User Code.
  2. Enter your 4-digit code to confirm.

If you forget the user code to your Lorex Cloud app, you will need to delete and then re-install the app.

Lorex Secure / FLIR Secure App: Modifying the HD WiFi camera password

Lorex Secure / FLIR Secure app for smartphones and tablets support HD WiFi camera password changes through the app.

Prerequisites:

  • Install the Lorex Secure app, available for Android on the Google Play Store or iOS (Apple) on the App Store.
    OR
  • Install the FLIR Secure app, available for Android on the Google Play Store or iOS (Apple) on the App Store.
  • Ensure you have connected to your DVR / NVR system or HD WiFi camera using the Lorex Secure / FLIR Secure app.
  • The following instructions are shown using an Android smartphone. There may be some differences in the user interface when using an iOS (Apple) smartphone or iPad.

To change your HD WiFi camera password using Lorex Secure / FLIR Secure app:

  1. Launch the Lorex Secure / FLIR Secure app on your smartphone or tablet.
  2. Tap the camera you want to change the password for.TIP: If you also have DVR / NVR systems on your Lorex Secure / FLIR Secure app, swipe left to the CAMERAS tab to view HD WiFi cameras.FLIR Secure App: Home Screen
  3. Tap the Gear icon (FLIR Secure App: Gear Icon) beneath the Live View to open the Settings menu.
  4. Swipe left to the General tab.FLIR Secure App: FXC Settings
  5. Enter a new Camera Password, and then tap Save to save the settings.

Lorex Secure / FLIR Secure App: Modifying the LHB Series DVR password

The Lorex Secure / FLIR Secure app for smartphones and tablets supports LHB Series DVR password updates through the app.

Prerequisites:

  • Ensure your HD WiFi camera or DVR / NVR system is powered on and connected to the network.
  • Install the Lorex Secure app, available for Android on the Google Play Store or iOS (Apple) on the App Store.
    OR
  • Install the FLIR Secure app, available for Android on the Google Play Store or iOS (Apple) on the App Store.
  • If more than one smartphone or tablet is connected to the DVR / NVR system, only the smartphone or tablet that was connected to the DVR system first will have the capability of changing the password.
  • Log in to the Lorex Secure / FLIR Secure app using the administrator account. Secondary users cannot perform password updates.

To update your HD WiFi camera or DVR / NVR system password:

  1. Launch the Lorex Secure / FLIR Secure app on your smartphone or tablet.
  2. Tap a channel connected to the DVR / NVR you want to change the password for to initiate the Live View.FLIR Secure App: Home Screen
  3. Tap the Gear icon (FLIR Secure App: Gear Icon) beneath the Live View to open the Settings menu.
  4. Swipe up to reach the bottom of the menu, and then tap Device Settings.
  5. Tap Update Password.FLIR Secure App: Update Password
  6. Enter a new password and then tap Update.FLIR Secure App: Update Password

Your new password will be used to access your HD WiFi camera or DVR / NVR system directly, as well as remotely using a smartphone, tablet, or computer.

Click here for information on how to modify your camera password using the FLIR Secure web portal.

MPX Series: Modifying user permissions

You can set permissions for any user on your MPX Series DVR. The administrator account is the only account that can modify user account permissions. By editing user permissions, you can enable or disable access to menus and functions.

The following instructions require you to access your system using your DVR and a monitor.

To edit user permissions:

  1. Right-click on the Live View to access the Quick Menu.
  2. Click Main Menu and then click the Setting icon (Setting icon), and then click Account.
  3. Click the Pencil icon (MPXDVR: Pencil Icon) next to the user account you want to configure to open the Add User window.MPXDVR: Add User Window
  4. Select the features and the menus that the user can access.
  5. Click OK to save your settings.

Resetting Passwords on IP Cameras

If you forgot your IP camera’s password, try the current or previous NVR’s password on the camera. If this does not work, follow these steps to reset the password and regain access.

To change the password on an IP camera:
  1. Access the Info screen on the NVR and check for the local IP address.
  2. Open your IE web browser and input the IP address in the address bar, input the username and password of your NVR, then click Login to view your device.
  3. Drop down the Camera setting located on the left taskbar to access Remote Device settings.

Camera > Remote Device

  1. All of the IP camera’s will be listed underneath the Added Device tab. Click on the WEB browse internet icon for the IP camera that you are trying to access.

WEB Browse

  1. Enter a fake password when the login screen appears.
  2. The failed login attempt will reveal the IP camera’s serial number (S/N) and the date.

Take down the Date and Serial Number

  1. Call Technical Support and provide the IP camera’s serial number and the date to receive a reset password.
  2. After logging in with the reset password, drop down the System setting on the taskbar to access the Default settings.
  3. Click on Default to reset your IP camera to factory settings.

Set to default settings

The default username and password will both be: admin.

If the camera is plugged into an external POE switch:
  1. Access the Info screen on the NVR to check for the local IP address and MAC address.
  2. Open your IE web browser and input the IP address to access the web interface.
  3. Enter a fake password in the login screen.
  4. The failed login attempt will reveal the IP camera’s serial number (S/N) and the date.

Take down the Date and Serial Number

  1. Call Technical Support and provide the IP camera’s serial number, the date, and the MAC address to receive a reset password.
  2. After logging in with the reset password, drop down the System setting on the taskbar to access Default settings.
  3. Click on Default to reset your IP camera to factory settings.

Set to default settings

The default username and password will both be: admin.

Resetting Your Lorex Account Password

If you can not remember your Lorex password or are having trouble accessing your account, you can follow these steps to reset your password.

Reset Your Password Online

  1. From lorextechnology.com navigate to the Login page.
  2. Below the Login form, press Forgot your password.

Lorex Reset Password Lorex Reset Password

  1. Enter the email address associated with your Lorex Account to receive password reset instructions to your inbox.

Lorex Reset Password

  1. You should receive an email with a verification code. Make sure to check your junk/spam folder if you have not received anything in your inbox.
  2. Return back to the Lorex Forgot Your Password page and input your email address, new password, and verification code that you received.

Lorex Reset Password Lorex Reset Password

 

  1. Click Reset my Password to finish. Your password should now be reset!

Lorex Reset Password

Resetting Your Lorex Home App password

If you forgot your Lorex Home app password, use these steps to reset it and regain access to your app. After resetting the Lorex Home app password, it will automatically change the Lorex Account password as well.

NOTE: The following instructions are shown using an iOS (Apple) smartphone. There may be some differences in the user interface when using an Android smartphone or tablet.

To reset your Lorex Home password:

1 Launch the Lorex Home app on your smartphone or tablet.

2 Once you’re met with the login screen, tap Forgot password? on the bottom right.

Lorex Home app login screen

3 In the Email field, enter your registered email address.

4 In the Password field, enter your new account password.

NOTE: Your password must contain a combination of 8-32 characters, containing both letters and numbers.

5 Tap the Get activation code button.

Forgot password screen

6 Check your email for your Lorex activation code.

NOTE: The activation code has been sent to your email. This code will be valid for 15 minutes.

7 In the app, enter the 6-digit verification code to validate your password reset.

8 Tap OK.

Once validated, you will be redirected to the Devices screen.

You will now be able to login to your Lorex Home app and your Lorex Account with your new password.

Security and Privacy: Permission to access your recorder

Your security and privacy are important to us. Lorex will never access cameras on your system unless we have your express permission to do so. We cannot connect to your unit unless you provide us your device ID / DDNS, username, and password.

]]> https://www.xvraid.com/guide/lorex-device-password-reset-guidelines.html/feed 0 HILOXVR NVR Latest Firmware https://www.xvraid.com/firmware/hiloxvr-nvr-latest-firmware.html https://www.xvraid.com/firmware/hiloxvr-nvr-latest-firmware.html#comments Thu, 03 Nov 2022 18:42:48 +0000 https://www.xvraid.com/?p=1133 You can download the latest HILOXVR firmware in the following list:

Hilo model

HILOXVR-E80410P    Download

HILOXVR-E80810P    Download

HILOXVR-D20410A   Download

HILOXVR-D20810A   Download

HILOXVR-R20410A   Download 

HILOXVR-R20810A   Download

HILOXVR-R20160A   Download

HILOXVR-R203240A Download

HILOXVR-R80410A   Download

HILOXVR-R80810A   Download

HILOXVR-R801620A Download

You can download the latest NVR firmware in the following list:

Hilo model

HILONVR-P803240A Download

HILONVR-P801620A Download

HILONVR-P80810AR Download

HILONVR-P80410A   Download

HILONVR-E80410      Download

HILONVR-E80810      Download

HILONVR-E801610    Download

HILONVR-E80410P    Download

HILONVR-E80810P    Download

VMS CLIENT

For Windows 64Bit you can download the VMS client from the following link:

Download

For Mac you can download the VMS client from the following link:

Download

SURVEILLANCE CLIENT

Clients for WINDOWS

Windows 32bit Download

Windows 64bit Download 

Client for Mac

MAC 32bit Download 

MAC 64bit Download   

HILO CCTV MOBILE APP

For Android, you can download the mobile app from here

Download

For IOS, you can download the mobile app from here

Download

DEVICE CONFIG TOOL

 You can get a Standalone tool for updating and modifying network, by clicking Download. 

QUICK GUIDES

Quick Guide Startup wizard: Download

Quick Guide How to create alarm: Download

Quick Guide How to create mail: Download

Quick Guide How to extract video: Download

Quick Guide How to create users: Download

User Manual for VMS Client: Download

]]> https://www.xvraid.com/firmware/hiloxvr-nvr-latest-firmware.html/feed 12 Bosch Security new firmware software https://www.xvraid.com/firmware/bosch-security-new-firmware-software.html https://www.xvraid.com/firmware/bosch-security-new-firmware-software.html#comments Sun, 17 Jul 2022 10:38:10 +0000 https://www.xvraid.com/?p=961 Find and install firmware and software

Ensure your solution runs on the latest firmware and / or software from Bosch Security and Safety Systems. Within our download area you can get them for free.

Download Area

Ensure your solution runs on the latest firmware and / or software by visiting the Bosch Security and Safety Systems Download Area. This page also redirects to a number of video security applications.

Firmware Download 

Platform Version Reference Checksum Release note
all
20220704
Bosch IP Video Firmware InfoBrief 2022-07-04 [1.08 MB]
PDFicon32
CPP13
8.45.0032
CPP13 FW 8.45.0032 [998 MB]
PDFicon32
CPP14.2
8.51.0009
CPP14.2_FW_8.51.0009.fw [227 MB]
PDFicon32
CPP14.2
8.50.0138
CPP14.2_FW_8.50.0138.fw [227 MB]
PDFicon32
CPP4
7.10.0096
CPP4_H.264_7.10.0096.fw [53.1 MB]
PDFicon32
CPP4
7.10.0096
Complete CPP4 firmware 7.10.0096 package [94.7 MB]
PDFicon32
CPPS
7.84.0023
CPPS_FW_7.84.0506.fw [249 MB]
PDFicon32
CPP
7.84.0023
CPP_FW_7.84.0506.fw [540 MB]
PDFicon32
CPP7.3
7.84.0023
CPP7.3_FW_7.84.0023.fw [90.7 MB]
PDFicon32
CPP7
7.84.0023
CPP7_H.264_7.84.0023.fw [42.7 MB]
PDFicon32
CPP6
7.84.0023
CPP6_FW_7.84.0023.fw [62 MB]
PDFicon32
CPP13
8.41.0029
CPP13 FW 8.41.0029 [1 GB]
PDFicon32
CPP
7.81.0928
CPP_FW_7.81.0928_recovery.fw [2.13 MB]
PDFicon32
CPPS
7.83.0204
CPPS_FW_7.83.0204.fw [248 MB]
PDFicon32
CPP
7.83.0204
CPP_FW_7.83.0204.fw [649 MB]
PDFicon32
CPP7.3
7.83.0027
CPP7.3_FW_7.83.0027.fw [90.7 MB]
PDFicon32
CPP7
7.83.0027
CPP7_H.264_7.83.0027.fw [42.7 MB]
PDFicon32
CPP6
7.83.0027
CPP6_FW_7.83.0027.fw [61.9 MB]
PDFicon32
CPP13
8.40.0029
CPP13 FW 8.40.0029.fw [999 MB]
PDFicon32
CPP14.1
8.30.0082
CPP14.1_FW_8.30.0082.fw [113 MB]
PDFicon32
AVIOTEC
7.82.0025
CPP6_FW_7.82.0025_AVIOTEC.fw [61.8 MB]
PDFicon32
CPP13
8.12.0005
CPP13 FW 8.12.0005 for INTEOX moving cameras [493 MB]
PDFicon32
CPP13
8.12.0005
CPP13 FW 8.12.0005 for INTEOX fixed cameras [492 MB]
PDFicon32
CPP14.1
8.00.0155
CPP14.1_FW_8.00.0155.fw [116 MB]
PDFicon32
CPP7.3
7.81.0060
CPP7.3_FW_7.81.0060.fw [90.6 MB]
PDFicon32
CPP7
7.81.0060
CPP7_H.264_7.81.0060.fw [42.6 MB]
PDFicon32
CPP6
7.81.0060
CPP6_FW_7.81.0060.fw [61.8 MB]
PDFicon32
CPP13
7.75.0008
CPP13_FW_7.75.0008.fw [527 MB]
PDFicon32
CPP4
6.32.0124
CPP4_H.264_6.32.0124_EXTEGRA_only.fw [62.7 MB]
PDFicon32
CPP5
6.31.0010
CPP5_H.264_6.31.0010.fw [35.6 MB]
PDFicon32
CPP-ENC
5.97.0013
CPP-ENC_H.264_5.97.0013.fw [14.9 MB]
PDFicon32
CPP3
5.75.0011
CPP3_H.264_FW_5.75.0011.fw [37.4 MB]
PDFicon32
Platform Version Reference Checksum Release note
AMS
4.0.1
Instructions for download [60.1 KB]
PDFicon32
AMS
4.0.1
Installation Guide EN [159 KB]
PDFicon32
AMS
4.0.1
Installation Guide FR [166 KB]
PDFicon32
AMS
4.0.1
Open Source Licenses [563 KB]
PDFicon32
AMS
4.0.1
Map View EN [890 KB]
PDFicon32
AMS
4.0.1
Map View FR [730 KB]
PDFicon32
AMS
4.0.1
AMS 4.0.1 Configuration Operation EN [11.9 MB]
PDFicon32
AMS
4.0.1
AMS 4.0.1 Configuration Operation FR [8.86 MB]
PDFicon32
AMS
4.0.1
AMS 4.0.1 EN [2.75 GB]
PDFicon32
Platform Version Reference Checksum Release note
VRM
03.82.0069
MasterInstaller_VRM_03.82.0069_x64.zip [239 MB]
PDFicon32
VRM
04.01.0012
MasterInstaller_VRM_04.01.0012_x64.zip [248 MB]
PDFicon32
VRM
03.83.0045
MasterInstaller_VRM_03.83.0045_x64.zip [239 MB]
PDFicon32
Platform Version Reference Checksum Release note
VSG
8.1.0.59
VideoStreamingGateway Setup 8.1.0.59
PDFicon32
VSG
8.0.6.1
VideoStreamingGateway Setup 8.0.6.1
PDFicon32
VSG
7.2.7.1
VideoStreamingGateway Setup 7.2.7.1
PDFicon32
Platform Version Reference Checksum Release note
MPAX
6.36.0233
MPEG_ActiveX_6.36.0233.zip [38.8 MB]
PDFicon32
MPAX
6.13.0084
MPEG-ActiveX_6.13.0084.zip [27.1 MB]
PDFicon32
MPAX
5.90.0086
MPEG-ActiveX_5.90.0086.zip [55.2 MB]
PDFicon32
Platform Version Reference Checksum Release note
MW
10.00.0164
Bosch Monitor Wall 10.0 stand-alone installation package [43.4 MB]
PDFicon32
Platform Version Reference Checksum Release note
II
1.0.3
Intelligent Insights 1.0.3 [816 MB]
PDFicon32
Platform Version Reference Checksum Release note
FSM
5.6.2131
Patch_FSM_5_6_Client.zip [155 KB]
FSM
5.6.630
Patch_FSM_5_6_Server.zip [152 KB]
FSM
5.6.630
FSM_Server_5_6_630_Setup.zip [359 MB]
PDFicon32
FSM
5.6.2131
FSM_Client_5_6_2131_x64_Setup.zip [255 MB]
PDFicon32
Platform Version Reference Checksum Release note
CM
7.60.0082
Configuration Manager 7.60 [103 MB]
PDFicon32
CM
7.51.0090
Configuration Manager 7.51 [104 MB]
PDFicon32
CM
7.50.0073
Configuration Manager 7.50 [103 MB]
PDFicon32
CM
7.41.0079
Configuration Manager 7.41 [96.6 MB]
PDFicon32
CM
7.30.0065
Configuration Manager 7.30 [68.9 MB]
PDFicon32
Platform Version Reference Checksum Release note
BVMSVWR
11.1.1
BVMS Viewer 11.1.1 Setup
PDFicon32
BVMSVWR
11.0
BVMS11001025 VWR Patch ExportMovMp4SplitImage 355270
PDFicon32
BVMSVWR
11.0
BVMS11001025 VWR Patch CCinvalidAlarmSetting 354548
PDFicon32
BVMSVWR
10.1.1
BVMS101112 VWR Patch OCCCSlowDecPTZ 369862,326296,321687,320231
PDFicon32
BVMSVWR
10.1.1
BVMS101112 VWR Patch ExportSoundMP4SDKWorkflow 249915, 335522
PDFicon32
BVMSVWR
11.0
BVMS11001025 VWR Patch DSTtransitionSchedules 358822
PDFicon32
BVMSVWR
11.0
BVMS11001025 VWR Patch OC replay 8x Forensic Search 377531, 354124
PDFicon32
BVMSVWR
11.0
BVMS11001025 VWR Patch RefImageSensitiveMask 346015
PDFicon32
BVMSVWR
11.0
BVMS11001025_VWR Patch SDKSaveImagePane 357258
PDFicon32
BVMSVWR
10.1.1
BVMS101112 VWR Patch DibosExportMovMp4 351234
PDFicon32
BVMSVWR
10.1.1
BVMS101112 VWR Patch SecurityIssue 350403
PDFicon32
BVMSVWR
11.0
BVMS11001025 VWR Patch SecurityIssue 350403
PDFicon32
BVMSVWR
11.0
BVMS11001025 VWR Patch RefImageSensitiveMask 346015
PDFicon32
BVMSVWR
10.1.1
BVMS101112 VWR Patch CameraSupport 346763
PDFicon32
BVMSVWR
10.1.1
BVMS101112 VWR Patch AMGuserpermission 326967
PDFicon32
BVMSVWR
11.0
BVMS Viewer 11.0 Setup
PDFicon32
BVMSVWR
10.1.1
BVMS Viewer 10.1.1 Setup
PDFicon32
Platform Version Reference Checksum Release note
BVMS
11.1.1
BVMS 11.1.1 Lite-Plus-Professional Setup
PDFicon32
BVMS
11.0
BVMS11001025 Patch ExportMovMp4SplitImage 355270
PDFicon32
BVMS
11.0
BVMS11001025 Patch CCinvalidAlarmSetting 354548
PDFicon32
BVMS
10.1.1
BVMS101112 Patch ExportSoundMP4SDKWorkflow 249915, 335522
PDFicon32
BVMS
11.0
BVMS11001025 Patch DSTtransitionSchedules 358822
PDFicon32
BVMS
11.0
BVMS11001025 Patch Flexi8000iSupport 349597, 368355, 374266
PDFicon32
BVMS
11.0
BVMS11001025 Patch OC replay 8x Forensic Search 377531, 354124
PDFicon32
BVMS
11.0
BVMS11001025 Patch SDKSaveImagePane 357258
PDFicon32
BVMS
10.1.1
BVMS101112 Patch DibosExportMovMp4 351234
PDFicon32
BVMS
10.1.1
BVMS101112 Patch SecurityIssue 350403
PDFicon32
BVMS
11.0
BVMS11001025 Patch SecurityIssue 350403
PDFicon32
BVMS
11.0
BVMS11001025 Patch OC Keyboard EMS 383060,350341,356020,347163
PDFicon32
BVMS
11.0
BVMS11001025 Patch RefImageSensitiveMask 346015
PDFicon32
BVMS
10.1.1
BVMS101112 Patch IntuiAlarmPlay 337589,320037,326074,317617
PDFicon32
BVMS
10.1.1
BVMS101112 Patch DivarIPBasicConfig 328386
PDFicon32
BVMS
10.1.1
BVMS101112 Patch BlackScreenLiveGPUdecoding 328182
PDFicon32
BVMS
10.1.1
BVMS101112 Patch ClosingReplaySession 327101
PDFicon32
BVMS
10.1.1
BVMS101112 Patch OCCCSlowDecPTZ 369862,326296,321687,320231
PDFicon32
BVMS
11.0
BVMS11001025 Patch OCcrashEMS 339917,336777
PDFicon32
BVMS
11.0
BVMS11001025 Patch AlarmDisplayBlankPane 346573
PDFicon32
BVMS
11.0
BVMS11001025 Patch FLEXIOCcrashLUN 353965,353995,337415,343590,343170 [1.67 MB]
PDFicon32
BVMS
10.1.1
BVMS101112 Patch CameraSupport 346763
PDFicon32
BVMS
10.1.1
BVMS101112 Patch AMGuserpermission 326967
PDFicon32
BVMS
11.0
BVMS11001025 Patch SystemSlowdown 346819
PDFicon32
BVMS
11.0
BVMS 11.0 Lite-Plus-Professional Setup
PDFicon32
BVMS
10.1.1
BVMS 10.1.1 Lite-Plus-Professional Setup
PDFicon32
BVMS
10.1.1
BVMS 10.1.1 Patch – 326296 – OC SSH Remote Mgmt Srv [581 KB]
PDFicon32
Platform Version Reference Checksum Release note
DIPBVMS
11.1.1
DIP-73_Installer_for_BVMS11.1.1.zip [2.37 GB]
PDFicon32
DIPBVMS
1.00
BVMS on DIVAR IP Version Note [120 KB]
PDFicon32
DIPBVMS
1.0.0
DivarIP72xxAIO_ConfigFix_1.0.0.zip [6.13 MB]
PDFicon32
DIPBVMS
11.0 MR1
DIP-73_Installer_for_BVMS11.0_MR1.zip [2.46 GB]
PDFicon32
DIPBVMS
10.1.1 MR1
DIP-73_Installer_for_BVMS10.1.1_MR1.zip [2.02 GB]
PDFicon32
DIPBVMS
1.0.3
DIP-72_Patch_Installer_1.0.3_for_BVMS11.0.exe [27.1 MB]
PDFicon32
DIPBVMS
1.0.0.005
DIP-71_Patch_Installer_1.0.0.005_for_BVMS11.0.exe [13 MB]
PDFicon32
DIPBVMS
1.0.3
DIP-52_Patch_Installer_1.0.3_for_BVMS11.0.exe [27.1 MB]
PDFicon32
DIPBVMS
1.0.3
DIP-72_Patch_Installer_1.0.3_for_BVMS11.0.exe [27.1 MB]
PDFicon32
DIPBVMS
1.0.0.005
DIP-71_Patch_Installer_1.0.0.005_for_BVMS11.0.exe [13 MB]
PDFicon32
DIPBVMS
1.0.3
DIP-52_Patch_Installer_1.0.3_for_BVMS11.0.exe [27.1 MB]
PDFicon32
DIPBVMS
1.0.2
DIP-52_Patch_Installer_1.0.2_for_BVMS10.1.1.exe [23.9 MB]
PDFicon32
DIPBVMS
1.0
DIP-71_Patch_Installer_1.0_for_BVMS10.1.1.exe [13 MB]
PDFicon32
DIPBVMS
1.0.2
DIP-72_Patch_Installer_1.0.2_for_BVMS10.1.1.exe [23.9 MB]
PDFicon32
DIPBVMS
1.0
DivarIP7000AIO_Patch_1.0.exe.zip [32.3 MB]
PDFicon32
DIPBVMS
1.0.1
DIPaio5000_Patch_Installer_1.0.1.zip [58.2 MB]
PDFicon32
DIPBVMS
1.0
DivarIP5000AIO_Patch_1.0.exe.zip [45.4 MB]
PDFicon32
DIPBVMS
9.00.0827
DIP_BVMS_9_0_Software_Bosch_Appliance_BVMS_Installer_09.00.0827.0107_enUS_68050943627.zip
PDFicon32
DIPBVMS
8.00.0329
DIVAR_IP_7000_R2__Software_Bosch_Appliance_BVMS_Installer_08.00.0329_enUS_41965195659.zip
PDFicon32
DIPBVMS
7.50.432
DIVAR_IP_7000_Software_BVMSPatch_7.5.0.432_ImageDecoderMemory_203953_enUS_55074978955.zip
DIPBVMS
7.00.223
DIP_BVMS_Software_Bosch_Appliance_BVMS_Installer_07.00.223.0046_enUS_24158150411.zip
PDFicon32
DIPBVMS
6.5.0.325
Software_Bosch_Appliance_BVMS_Installer_6.5.0.325.0025_enUS_22982230027.zip
PDFicon32
DIPBVMS
6.00.0453
DIVAR_IP_Software_Bosch_Appliance_BVMS_Installer_06.00.0453_all_22389044491.zip
PDFicon32

PlatformVersionReferenceChecksumRelease note

BIS
4.9.2
Quick Installation Guide BIS 4.9.2 [706 KB]
PDFicon32
BIS
4.9.2
BIS 4.9.2 mandatory common files 1 [2.66 GB]
PDFicon32
BIS
4.9.2
BIS 4.9.2 mandatory common files 2 [1.05 GB]
PDFicon32
BIS
4.9.2
BIS 4.9.2 files for language RO [1.44 GB]
BIS
4.9.1
Visitor Management V1.0.1 [213 MB]
PDFicon32
BIS
4.9
Patch for CVE-2021-23843 [493 KB]
BIS
4.8
Patch for CVE-2021-23843 [475 KB]
BIS
4.7
Patch for CVE-2021-23843 [470 KB]
BIS
4.6
Patch for CVE-2021-23843 [458 KB]
BIS
4.9.1
Access Importer/Exporter Installation and User Guide
PDFicon32
BIS
4.9.1
BIS Quick Installation Guide All Languages
PDFicon32
BIS
4.9.1
Installation Manual BIS EN
PDFicon32
BIS
4.9.1
Instructions for downloading and installing
PDFicon32
BIS
4.9.1
OSS-SO Integration EN
PDFicon32
BIS
4.9.1
OSS-SO Integration DE
PDFicon32
BIS
4.9.1
BIS Open Source Licenses
PDFicon32
BIS
4.9.1
BIS 4.9.1 mandatory common files 1 (2.5 GB)
PDFicon32
BIS
4.9.1
BIS 4.9.1 mandatory common files 2 (1 GB)
PDFicon32
BIS
4.9.1
BIS 4.9.1 files for language EN (1.3 GB)
BIS
4.9.1
BIS 4.9.1 files for language DE (1.3 GB)
BIS
4.9.1
BIS 4.9.1 files for language PT (1.3 GB)
BIS
4.9.1
BIS 4.9.1 files for language PL (1.3 GB)
BIS
4.9.1
BIS 4.9.1 files for language HU (1.3 GB)
BIS
4.9.1
BIS 4.9.1 files for language NL (1.3 GB)
BIS
4.9.1
BIS 4.9.1 files for language FR (1.3 GB)
BIS
4.9.1
BIS 4.9.1 files for language ES (1.3 GB)
BIS
4.9.1
BIS 4.9.1 files for language AR (1.3 GB)
BIS
4.9.1
BIS 4.9.1 files for language TR (1.3 GB)
BIS
4.9.1
BIS 4.9.1 files for language RU (1.3 GB)
BIS
4.9.1
BIS 4.9.1 files for language CHS (1.3 GB)
BIS
4.9.1
BIS 4.9.1 files for language CHT (1.3 GB)
BIS
4.9
Patch for CVE-2021-23859 [3.92 MB]
BIS
4.8
Patch for CVE-2021-23859 [3.92 MB]
BIS
4.7
Patch for CVE-2021-23859 [3.92 MB]
BIS
4.9
Quick Installation Guide BIS 4.9
PDFicon32
BIS
4.9
Installation Manual BIS 4.9
PDFicon32
BIS
4.9
Instructions for downloading and installing
PDFicon32
BIS
4.9
BIS 4.9 mandatory common files 1 (2.5 GB)
PDFicon32
BIS
4.9
BIS 4.9 mandatory common files 2 (900 MB)
PDFicon32
BIS
4.9
BIS 4.9 files for language EN (1.4 GB)
BIS
4.9
BIS 4.9 files for language DE (1.4 GB)
BIS
4.9
BIS 4.9 files for language PT (1.4 GB)
BIS
4.9
BIS 4.9 files for language PL (1.4 GB)
BIS
4.9
BIS 4.9 files for language HU (1.4 GB)
BIS
4.9
BIS 4.9 files for language NL (1.4 GB)
BIS
4.9
BIS 4.9 files for language FR (1.4 GB)
BIS
4.9
BIS 4.9 files for language ES (1.4 GB)
BIS
4.9
BIS 4.9 files for language AR (1.4 GB)
BIS
4.9
BIS 4.9 files for language TR (1.4 GB)
BIS
4.9
BIS 4.9 files for language RU (1.4 GB)
BIS
4.9
BIS 4.9 files for language CHS (1.4 GB)
BIS
4.9
BIS 4.9 files for language CHT (1.4 GB)
BIS
4.8
Quick Installation Guide BIS 4.8
PDFicon32
BIS
4.8
Installation Manual BIS 4.8
PDFicon32
BIS
4.8
Instructions for downloading and installing
PDFicon32
BIS
4.8
BIS 4.8 mandatory common files 1 (2.0 GB)
PDFicon32
BIS
4.8
BIS 4.8 mandatory common files 2 (1.4 GB)
PDFicon32
BIS
4.8
BIS 4.8 files for language EN (1.2 GB)
BIS
4.8
BIS 4.8 files for language DE (1.2 GB)
BIS
4.8
BIS 4.8 files for language PT (1.2 GB)
BIS
4.8
BIS 4.8 files for language PL (1.2 GB)
BIS
4.8
BIS 4.8 files for language HU (1.2 GB)
BIS
4.8
BIS 4.8 files for language NL (1.2 GB)
BIS
4.8
BIS 4.8 files for language FR (1.2 GB)
BIS
4.8
BIS 4.8 files for language ES (1.2 GB)
BIS
4.8
BIS 4.8 files for language AR (1.2 GB)
BIS
4.8
BIS 4.8 files for language TR (1.2 GB)
BIS
4.8
BIS 4.8 files for language RU (1.2 GB)
BIS
4.8
BIS 4.8 files for language CHS (1.2 GB)
BIS
4.8
BIS 4.8 files for language CHT (1.2 GB)
BIS
4.8
BIS-ACE 4.8 Patch for Database restore (0.3 MB)
BIS
4.7
Quick Installation Guide BIS 4.7
PDFicon32
BIS
4.7
Installation Manual BIS 4.7
PDFicon32
BIS
4.7
BIS 4.7 mandatory common files 1 (2.0 GB)
PDFicon32
BIS
4.7
BIS 4.7 mandatory common files 2 (1.4 GB)
PDFicon32
BIS
4.7
BIS 4.7 files for language EN (1.2 GB)
BIS
4.7
BIS 4.7 files for language DE (1.2 GB)
BIS
4.7
BIS 4.7 files for language PT (1.2 GB)
BIS
4.7
BIS 4.7 files for language PL (1.2 GB)
BIS
4.7
BIS 4.7 files for language NL (1.2 GB)
BIS
4.7
BIS 4.7 files for language HU (1.2 GB)
BIS
4.7
BIS 4.7 files for language FR (1.2 GB)
BIS
4.7
BIS 4.7 files for language ES (1.2 GB)
BIS
4.7
BIS 4.7 files for language AR (1.2 GB)
BIS
4.7
BIS 4.7 files for language TR (1.2 GB)
BIS
4.7
BIS 4.7 files for language RU (1.2 GB)
BIS
4.7
BIS 4.7 files for language CHS (1.2 GB)
BIS
4.7
BIS 4.7 files for language CHT (1.2 GB)
BIS
4.7
BIS-ACE 4.7 Patch for temporary cards (0.3 MB)
Platform Version Reference Checksum Release note
Android
3.2.1.79
Video Security in Google PlayStore
Apple iOS
3.2.1.79
Video Security in Apple App Store
Platform Version Reference Checksum Release note
Win10_x64
3.2.4.125
VideoSecurity_3.2.4.125.msi [10.9 MB]
 
PDFicon32
]]> https://www.xvraid.com/firmware/bosch-security-new-firmware-software.html/feed 23