To view a video showing the firmware upgrade process, click here.

1.1 Open Wisenet Device Manager from a computer connected to the same network as the camera.
1.2 Click on ‘Search’.

2.1 Select the device
2.2 Click on ‘FW’
2.3 Select ‘FW Upgrade’

3. Click on ‘File Open’

Note: You can also click the ‘Download’ button to have Wisenet Device Manager download the necessary firmware files.

4.1 Browse for the correct Firmware File.  Note that a downloaded firmware file is typically in a ZIP file.  You will need to first unzip the firmware file so that you can locate the .IMG file.
4.2 Click on ‘Open’

5. Click on ‘Upgrade’

6.1 Wait until the Status shows “Success” and the New version of the firmware is displayed.
6.2 Click on ‘Close’ to finish.

VMS & ONVIF Supported Device Firmware Version

1. VMS Supported Device Firmware Version

You can search a supported device list for 3rd party VMS through the below websites.

– Genetec: https://www.genetec.com/supported-device-list

– Milestone: https://www.milestonesys.com/support/tools-and-references/supported-devices/

– WAVE: https://wavevms.com/resources/compatible-devices/

And, in this kind of list, you may be noticed that some specific version of firmware are listed.

It looks that specific version of firmware only can support for the VMS, but it is not.

All Hanwha cameras are basically backward compatible, so you can think of them as Latest Firmware or Higher versions can support the VMS properly.

Please use the latest firmware, and let us know if you have any issues with the version.

How To Wisenet Firmware Update

2. ONVIF Supported Device Firmware Version

You can search ONVIF certification for our Wisenet Cameras through the below ONVIF website.

ONVIF: https://www.onvif.org/conformant-products/

The certified version on the list could be an older version when you are searching ONVIF certification.

In that case, please request a new ONVIF certification for the latest version of firmware.

How to Security Systems Firmware Upgrade: A Comprehensive Guide

Learn how to perform a security systems firmware upgrade with our step-by-step guide. Ensure your security systems are up-to-date and running smoothly.

Table of Contents

1. Introduction to Security Systems Firmware
2. Importance of Firmware Upgrades in Security Systems
3. Types of Security Systems That Require Firmware Upgrades
4. Understanding Firmware and Its Role in Security Systems
5. Preparing for a Firmware Upgrade
   • 5.1 Backing Up Your Security System
   • 5.2 Checking the Current Firmware Version
6. Steps to Perform a Security Systems Firmware Upgrade
   • 6.1 Downloading the Latest Firmware
   • 6.2 Uploading and Installing the Firmware
7. Post-Upgrade Procedures
   • 7.1 Verifying the Firmware Installation
   • 7.2 Restoring System Settings
8. Troubleshooting Common Issues During Firmware Upgrade
   • 8.1 Firmware Update Failed
   • 8.2 System Incompatibility Issues
9. Best Practices for Maintaining Security System Firmware
10. The Risks of Not Updating Security System Firmware
11. How Often Should You Update Your Security Systems Firmware?
12. Automated Firmware Updates: Pros and Cons
13. Choosing the Right Time for a Firmware Upgrade
14. FAQs on Security Systems Firmware Upgrade
15. Conclusion

1. Introduction to Security Systems Firmware

Firmware is the backbone of any security system, acting as the bridge between the hardware and software components. It controls the system’s fundamental operations and ensures that all parts function harmoniously. Understanding what firmware is and its significance is crucial before diving into the upgrade process.

2. Importance of Firmware Upgrades in Security Systems

Upgrading your security system’s firmware is not just about keeping up with technology; it’s about ensuring your system’s integrity, performance, and security. Firmware updates often come with patches for vulnerabilities, new features, and improved compatibility, making them essential for maintaining robust security.

3. Types of Security Systems That Require Firmware Upgrades

Various security systems, including surveillance cameras, alarm systems, access control systems, and home automation devices, require regular firmware updates. Each of these systems relies on firmware to operate efficiently and securely.

4. Understanding Firmware and Its Role in Security Systems

Firmware is embedded software programmed directly into the hardware of a security system. It dictates how the system behaves, processes data, and communicates with other devices. Without regular updates, firmware can become outdated, leaving your security system vulnerable to new threats and inefficiencies.

5. Preparing for a Firmware Upgrade

Before starting the upgrade process, preparation is key. This involves several steps that ensure the system is ready for the new firmware.

5.1 Backing Up Your Security System

Always back up your system settings and data before initiating an upgrade. This precautionary step ensures that you can restore your system to its previous state if something goes wrong during the update.

5.2 Checking the Current Firmware Version

Knowing the current firmware version helps you determine whether an upgrade is necessary. Most systems allow you to check the firmware version through the system’s interface or accompanying software.

6. Steps to Perform a Security Systems Firmware Upgrade

Upgrading the firmware of your security system can seem daunting, but following these steps can simplify the process.

6.1 Downloading the Latest Firmware

First, visit the manufacturer’s website or use the system’s software to download the latest firmware version. Ensure the firmware is compatible with your specific model.

6.2 Uploading and Installing the Firmware

Once downloaded, upload the firmware to your security system via a USB drive, SD card, or through a network connection. Follow the on-screen instructions to install the update, and avoid interrupting the process to prevent errors.

7. Post-Upgrade Procedures

After successfully installing the firmware, some post-upgrade steps ensure everything is running smoothly.

7.1 Verifying the Firmware Installation

Check the system’s firmware version again to confirm that the update was successful. If the new version is displayed, your upgrade is complete.

7.2 Restoring System Settings

If the upgrade reset any settings, restore them from your backup. This step ensures your system functions as expected with the new firmware.

8. Troubleshooting Common Issues During Firmware Upgrade

Sometimes, things don’t go as planned. Here’s how to troubleshoot common problems during a firmware upgrade.

8.1 Firmware Update Failed

If the update fails, restart the system and try again. Ensure that the firmware file is not corrupted and is compatible with your system.

8.2 System Incompatibility Issues

Incompatibility issues can arise if the wrong firmware version is installed. Double-check the firmware version and the model of your security system to avoid this issue.

9. Best Practices for Maintaining Security System Firmware

To keep your security system running optimally, follow these best practices for maintaining firmware.

• Regularly Check for Updates: Set a reminder to check for firmware updates every few months.
• Enable Notifications: Some systems allow you to enable notifications for new firmware releases.
• Test System After Update: Always test your security system after a firmware update to ensure all components are functioning correctly.

10. The Risks of Not Updating Security System Firmware

Failing to update your security system’s firmware can lead to several risks, including:

• Security Vulnerabilities: Hackers often exploit outdated firmware to gain unauthorized access.
• Reduced System Performance: Over time, outdated firmware can slow down your security system.
• Loss of New Features: Manufacturers often add new features to firmware updates, which you’ll miss out on if you don’t upgrade.

11. How Often Should You Update Your Security Systems Firmware?

There’s no one-size-fits-all answer, but as a rule of thumb, check for updates at least twice a year or whenever the manufacturer releases a new version. This ensures your system remains secure and up-to-date.

12. Automated Firmware Updates: Pros and Cons

Many modern security systems offer automated firmware updates, but this feature comes with both advantages and disadvantages.

Pros:

• Convenience: Updates are installed automatically without manual intervention.
• Timeliness: Your system stays updated without delay.

Cons:

• Lack of Control: You may not have the opportunity to back up settings before the update.
• Potential Downtime: Automated updates can occur at inconvenient times, potentially disrupting your system’s operation.

13. Choosing the Right Time for a Firmware Upgrade

Timing is crucial when performing a firmware upgrade. Choose a time when your security system’s downtime will have the least impact, such as during off-hours or when the premises are unoccupied.

14. FAQs on Security Systems Firmware Upgrade

1. What is firmware in a security system?

Firmware is a type of software embedded into the hardware of a security system, controlling its basic operations and functions.

2. How do I know if my security system needs a firmware update?

You can usually check for firmware updates via the system’s interface or the manufacturer’s website. If your system is experiencing performance issues, it might be time for an update.

3. Can I revert to the previous firmware version if something goes wrong?

Some systems allow you to revert to the previous firmware version, but this is not always possible. Always back up your system before upgrading.

4. Will a firmware upgrade affect my system’s settings?

In some cases, a firmware upgrade may reset your system’s settings. It’s important to back up your settings before performing an upgrade.

5. How long does a firmware upgrade take?

The duration of a firmware upgrade varies depending on the system, but it usually takes anywhere from a few minutes to an hour.

6. Are firmware upgrades free?

Most manufacturers provide firmware updates for free as part of their ongoing support for the product.

15. Conclusion

Upgrading the firmware of your security system is an essential task that ensures your system remains secure, efficient, and equipped with the latest features. By following the steps outlined in this guide, you can confidently perform a firmware upgrade and maintain the integrity of your security systems.

Latest Chinese New DVR NVR Firmware

How to ensure a longer service life of solar cameras?

The most important thing is to choose a solar camera with a large battery capacity, the battery capacity of a solar security camera determines how long the camera can operate without sunlight. The best solar-powered security cameras come with batteries that provide at least 12 hours of power, even without the sun.

Usually, the camera is equipped with 6 18650 batteries, and the battery capacity is at least 21700mAh, which can ensure that the battery can supply power for up to 3 days on cloudy and rainy days without light. If you live in a year-round sunny area, battery choice isn’t the most important thing to you. Longer-lasting rechargeable batteries are essential if you live in an area that doesn’t get a lot of sunlight for part of the year.

.

How Do Solar-powered Security Cameras Work?

The first question asked by many first-time buyers is how do solar-powered security cameras work? Solar-powered security cameras rely on small solar The first question many first-time camera buyers ask is how do solar security cameras work? In fact, solar-powered security cameras rely on small solar panels to convert sunlight into electricity, which then charges the rechargeable battery built into the camera. Integrated inverters in security cameras can also convert direct current (DC) power from the solar panels to alternating current (AC) power to provide power when the sun is out. Storing power from the built-in battery during the day keeps the solar-powered security camera working at night.

How to reduce the delay between the trigger (motion detection) and recording?

Pls kindly note that if there is no PIR detection, the camera will be in standby mode for saving power, once there are any PIR activities, the camera needs time to activate itself, upload the data to the server, and download that data to your cellphone.
Generally speaking, there will be a 3-6s delay, when the motion is too fast or short, your camera might not have a chance to capture it, appreciate your understanding.
If the Wi-Fi signal is weak, your camera will take a much longer time to be activated and upload/download the data to the server, pls ensure your camera is connected with a strong and stable Wi-Fi signal.

4G Solar Cameras FAQ and Solutions

How long does it take for a solar camera to be fully charged?

If the solar camera is working under good weather conditions with efficient sunlight and fits the working temperature and humidity standard, it can be fully charged at least 8 hours of direct sunlight. If your installation area is often cloudy or rainy or snowy, this may limit the amount of sunlight your solar device receives. It is recommended to choose a location that can receive the most sunlight during installation

What I could do to improve my wifi signal on the wifi battery camera?

For the wifi battery camera, the max WIFI range it’s around 30-60 ft, the best WIFI range is 30 ft.
If the place you want to install the wifi battery camera is too far away from your router, the wifi signal might be weak. But you can use the WIFI extender to strengthen the wifi network.

Below are a handful of tips to help you improve and optimize your home wireless network speed.
1). Location of Your Router Matters.
2). Overcome Interference & Find the Right Wireless Channel.
3). Use Wi-Fi Extenders to Boost Your Range.
4). Make Sure Your Firmware is Up-to-Date.
5). Secure Your Wi-Fi Connection.

How long can a solar camera be used without sunlight with a full charge?

The solar camera of the low-power type uses the PIR motion detection function. Only the detected person will trigger to start working, and it will be in a sleep state at other times. Under normal circumstances, the camera can continue to work for a long time in the absence of sunlight, depending on the number of triggers. A fully charged solar camera battery can typically provide 5 to 7 days without sunlight, assuming the camera works 24 hours a day.

In addition, the total capacity of the battery will also affect the duration of the charge. It depends on the type of battery.

Sometimes the battery is drained quickly, probably by leaving the app open all day/night to drain the battery. So as long as you regularly check for notifications or other notifications, the battery will never go away. As long as the number of triggers is small, almost no power is consumed overnight.

Why are more and more people choosing solar-powered security cameras?

.

The solar 3G 4G camera surveillance system is a major breakthrough in the camera industry. It breaks the limitation that traditional cameras need a network and main power for data transmission. Using mobile phone mobile networks to transmit video data and solar energy to supply electricity, solar 3G 4G camera solves the monitoring problem in areas without grid and electricity.

The working principle of 3G/4G cameras is similar to that of mobile phones: the video data is sent to the server through the base station through the built-in 4G module. Therefore, in order to transmit data, the 3G/4G camera needs to be inserted into the SIM card like the mobile phone.

The working principle of the solar power generation system is to generate electricity through the solar panel and store it in the battery, so as to ensure that the camera can continue to work at night without light and on cloudy and rainy days.

Remote (and geographically challenging) areas may not have electricity and wireless networks, but they still need the same security. In fact, these locations are more difficult to secure because they don’t have that access—thieves know it. In order to reduce your losses, it is recommended that you first understand the solar camera to see if it is suitable to escort your safety.

Benefits of Off Grid Solar Powered Security Cameras

1. Solar security cameras allow flexible positions

Solar security cameras do not require cables and grids to work. Therefore, it can be used in various monitoring applications, such as remote sites or geographically challenging environments.

Typical locations where you can install solar surveillance cameras include, but are not limited to, your vacation home, shed, construction site, vineyard, farm, barn, boat, warehouse, RV, and more.

2. Easy to install and move

Solar powered wireless security cameras can be quickly installed anywhere you want, and since you don’t need to run any messy cables or drill holes, it’s a very cost-effective security option.

Even better, you can easily move solar security cameras as projects progress or are complete, such as construction sites or new hoses under construction, and bring the solar IP cameras to new locations.

Solar security cameras are highly portable and flexible, requiring no wires, no wiring, and no drilling. You can place it indoors and outdoors wherever you like, such as your front door, backyard, nursery, temporary work sites, and more.

3. Environmentally friendly

Solar-powered security cameras are powered by renewable sunlight and do not damage the environment or cause any pollution like waste and disposable batteries.

What’s more, creating the infrastructure to support traditional surveillance systems can be disruptive. Solar-powered surveillance cameras require no infrastructure and can protect areas such as wetlands. This is an eco-smart solution as it requires no electricity and runs on renewable energy. It also requires minimal infrastructure requirements so the surrounding natural environment can remain the same.

4. Solar powered cameras provide day and night surveillance

Solar-powered wireless security IP cameras can be powered by rechargeable batteries at night when there is no sunlight.

Some solar security cameras are equipped with starlight sensors that can provide brilliant color night vision – a huge leap compared to other security cameras.

5. Easy to expand

Solar security cameras are also a flexible and scalable solution if you want to add 2 or 3 cameras later. With Security Camera Viewer, you can also watch live views of multiple solar IP cameras simultaneously on your smartphone. If you need to add or remove security cameras, it’s easy to do so with a solar system. Whether you’re powering an entire site or a single room, solar power can help you do just that. You can group cameras and combine real-time information into one secure login where you can access all footage.

6. Solar security cameras have a long service life

Most solar panel manufacturers offer more than 10 years warranty, which means that solar panels used in security cameras can still produce no less than 80% of their power after 10 years, with little or no maintenance.

7. High privacy and security

Compared with the traditional camera transmitted through the Internet, the signal transmission through the mobile phone network is more secure, and it is more difficult for hackers to break into the camera system

8. No power supply required

No electricity is required, and the system can include battery backup to ensure that when there is not enough sunlight for a period of time, you will always have power, even if there is a power outage in your area. The rechargeable battery retains enough power to keep the camera running, even in foggy weather. Most solar panels are sturdy enough to catch small rays on low-light days. Don’t worry about power outages!

9. Cloud Control

You can install solar safety systems anywhere – they work efficiently wherever you install them.

If you live in a remote area with electrical connectivity issues, these systems will work perfectly. When a camera needs to be adjusted, technicians don’t need to be on-site because they can make adjustments from a remote location via the cloud. Today, most of these cameras are equipped with Wi-Fi, which makes them easy to monitor and operate from any remote location. If you’re on vacation, you can adjust camera settings and monitor your home with confidence.

10. Intelligent Analysis

The system can send notifications to employees in various situations, such as the detection of an intruder or unusual activity.

11. Waterproof and moisture-proof

Since the purpose of installing solar security cameras is to consistently perform and overcome any situation caused by nature outdoors, LS Vision’s solar cameras feature ip66 weather protection against snow, rain, dust, and direct sunlight to protect your property all year round.

Home solar systems have many advantages. The main benefit is reduced carbon emissions and lower bills. After installing solar security cameras, you can move on to installing solar security lights, solar security sirens, and other solar systems. This way, not only will your bills be affordable, but you’ll also be doing your part in reducing global warming.

What to Consider When Buying a Solar Security Camera?

Solar powered security cameras, with self-renewal and clean energy, are gaining popularity as the public becomes more environmentally conscious. The initial investment in buying one of the best quality solar security cameras can be huge, but as the life of the solar panels increases and more solar security cameras are installed, the future benefits will definitely be worth it. In your process of choosing the best solar security camera, here are some key factors that you absolutely cannot miss.

1. Solar panel capacity of solar security camera

The amount of electricity that a solar panel in a solar security camera can generate is determined by a variety of factors, such as the average amount of sunlight, weather conditions, the tilt angle of the panels, and more.

The solar panels that come with the security camera should generate enough power to power the camera for 8 hours a day. At the same time, it should also be able to have a fully charged battery.

To ensure the efficiency of the solar panel is at its best, make sure that nothing is blocking the direct sunlight from the solar panel. If you are in the northern hemisphere, orient the PV panels due south; if you are in the southern hemisphere, orient the PV panels due north for maximum natural resources.

Weather conditions like snow and dark clouds can reduce the efficiency of a solar panel, so giving it the best possible angle will help.

Also keep your solar security camera’s panel clear of possible obstructions, such as shadows from nearby trees or shrubs.

In addition, it can improve the performance of the security camera by regularly wiping the surface of the solar panel with a damp paper towel or cloth to remove dust or debris.

2. How much battery does your solar security camera need

These rechargeable batteries can power your solar-powered security camera in low sunlight.

Solar security cameras should be equipped with rechargeable batteries to power the camera when the sun is low. The capacity of the battery should be at least 10 times the maximum output capacity of the solar panel. Otherwise, the battery may be damaged by overcharging.

The average charging time is about 6 to 8 hours. This stored power should last from 1 week to 3+ months without additional charging. Of course, it is possible that only the camera is actively recording when the motion detector is triggered or when the user is connected to the camera.

The storage capacity of a battery is measured in milliamp hours or milliamp hours. The more features a camera has that require power (such as two-way audio, Wi-Fi connectivity, and night vision), the more battery capacity it will require.

A shortcut to choosing a battery for your solar security camera is to buy a solar IP camera with a rechargeable battery.

If you want to add a battery backup to your solar security camera, you can ask the seller of the solar camera directly for recommended models.

3. Where will the solar security camera save the video

If you prefer to record motion-activated video locally without charging a subscription fee, a solar powered security camera with an SD card might be a good option.

You can also easily playback and manage video from wireless solar surveillance cameras via the phone’s motion sensor stored on the memory card.

If you prefer to access your data anywhere on your mobile device with an internet connection then opt for a cloud service and you can access your data anywhere on your mobile device with an internet connection. The footage of the wireless solar security camera with motion sensor can be Save on your phone’s SD card.

4. Data Transmission Of The Solar Security Camera

WiFi solar security cameras with motion sensors can send instant alerts when the network is connected. You can also watch solar wireless home security cameras live through the APP on your smartphone.

If there is no network in the monitored place, don’t worry!

Solar security camera with SD card (slot) can still record motion sensing events even without WiFi/Internet.

But if you want to watch your wireless solar security camera live or receive instant alerts, an internet connection is a must.

Thanks to the introduction of solar-powered cellular security cameras, they can operate on 3g/4G cellular data and work where there is no hardwired internet or WiFi, like 4g solar-powered security cameras.

Any feature of a wireless solar security camera you can find in a solar cellular security camera.

5. Image Resolution of Solar Security Camera Lenses

Resolution refers to the sharpness of an image. If the lenses aren’t sharp enough that you can’t see individual faces, these lenses are useless.

Preferably between 720p to 1080p resolution, although there are higher resolution cameras. 720P resolution is common in low-end and budget models. 1080P resolution is standard for most solar cells.

6. Cost of Wireless Solar Security Cameras

The initial investment in buying the best quality solar CCTV security cameras can be large, but as the life of the solar panels increases and more solar security cameras are installed, the future benefits will definitely outweigh the costs.

So instead of opting for a fake solar security camera or a cheap solar IP camera with a low resolution, choose a high-quality solar security camera from a trusted brand.

Quick tip: When you’re looking for a wireless solar-powered outdoor security camera, make sure it’s at least Full HD (1080p) for recognizable detail.

7. Design and waterproof performance of solar security camera

According to the shape and design, it is divided into two categories: bullet type and dome type.

a. Bullet-type surveillance cameras

Bullet-type, they have a fixed field of view with a wide field of view that can be adjusted manually or via a remote control. Bullet-shaped security cameras are often used at entrances. They usually include motion sensing and night vision.

b. Dome security camera

Their field of view is usually smaller. Their swivel angle is close to 360 degrees, which makes them a great choice in commercial and industrial settings. They are also sometimes used in residential environments, although dome cameras designed for the home are generally not as robust as those designed for commercial and industrial applications.

The waterproof rating can tell you how well your camera will work outdoors. It is represented as IPXX. IP stands for Ingress Protection. The first x represents resistance to debris, ranging from larger solid objects, like leaves, to tiny solid objects, like dust.

The second x represents the resistance to water, which can be zero resistance, or a prolonged immersion in several feet of water with no effect. A rating of 5 will ensure the camera doesn’t shut down in heavy rain.

8. Solar security camera compatibility with existing infrastructure

Your existing Wi-Fi, smart home or 4G service provider should be compatible with solar powered security cameras. While most products will work with any type of Wi-Fi, the ability to connect directly via a built-in 3g or 4g network and the ability to integrate with your smart home needs to be checked for security cameras to work properly.

9. Communicate via Solar Security Cameras

Some models allow you to have two-way intercom with the person on the other end via the built-in microphone and on-camera speaker. For this feature to work, find out the optimal working distance and height before purchasing or installing.

10. Motion Detection and Night Vision Capabilities Of Solar Security Cameras

PIR motion sensing is an advanced feature that uses computer algorithms to differentiate between human and non-human images. If the target is not a person, the motion detection system will not sound the alarm. Night vision capability is very useful if you want solar powered security cameras to work at night or in dark places.

Summarize

Running a few surveillance cameras 24/7,365 days a year can add a lot to utility bills. Using solar energy can save a lot of energy. This is why solar-powered security cameras are becoming more and more popular.

Besides reducing utility bills, they have a long list of other benefits and useful features over wired and battery-powered security cameras. In 2021, the performance of the solar version has already caught up with the conventional power version.

.

Introduction

In today’s world, ensuring the security of your home is more important than ever. LG security systems provide a robust and reliable solution to keep your property safe. This comprehensive guide will walk you through configuring and using your LG security system, ensuring you get the most out of its advanced features. Whether you’re a first-time user or looking to optimize your setup, this guide covers everything you need to know.

Table of Contents

.

Understanding LG Security System Components

An LG security system comprises several crucial components that work together to ensure comprehensive home security. These include cameras, sensors, control panels, and mobile apps.

Cameras

LG security cameras are designed to monitor various areas of your home. They come with features like high-definition video, night vision, and motion detection. Placement is critical to maximizing coverage and minimizing blind spots.

Sensors

Sensors detect movement and breaches in designated areas. There are several types of sensors, including door/window sensors, motion detectors, and glass break sensors.

Control Panels

The control panel is the central hub of your LG security system. It allows you to arm and disarm the system, configure settings, and receive alerts.

Mobile Apps

LG offers mobile apps that enable remote monitoring and control of your security system. These apps are available for both Android and iOS devices and provide real-time notifications and video feeds.

Initial Setup and Installation

Setting up your LG security system involves both hardware and software components. Follow these steps to ensure a smooth installation process.

Unboxing

Start by unboxing all the components. Ensure you have all the necessary parts, including cameras, sensors, the control panel, power adapters, and mounting hardware.

Hardware Setup

Software Setup

Connecting to the Network

Your LG security system can connect to your home network via Wi-Fi or Ethernet.

Wi-Fi Setup

Ethernet Setup

Troubleshooting Network Issues

Configuring the Control Panel

The control panel is where you manage all settings and operations of your security system.

Basic Settings

Advanced Settings

Setting Up Cameras

Proper camera setup is essential for effective surveillance.

Placement Tips

Camera Angles

Night Vision Setup

Configuring Sensors

Sensors are critical for detecting unauthorized entry.

Types of Sensors

Placement

Sensitivity Adjustment

Integrating with Smart Home Devices

Integrating your LG security system with other smart home devices can enhance its functionality.

Compatibility

Setup Instructions

Benefits

Mobile App Configuration

The mobile app is a powerful tool for managing your security system remotely.

Downloading the App

Initial Setup

Using the App

Setting Up Alerts and Notifications

Alerts and notifications are crucial for staying informed about security events.

Types of Alerts

Customizing Notifications

Testing Alerts

User Management

Proper user management ensures that only trusted individuals can access your security system

.

Introduction

Panasonic Security Systems are renowned for their reliability and advanced features, offering top-notch security solutions for both residential and commercial properties. This comprehensive manual guide will walk you through every aspect of using a Panasonic Security System, ensuring you get the most out of your investment. From installation to troubleshooting, we’ve got you covered.

Table of Contents

Understanding Panasonic Security Systems

Panasonic Security Systems offer a wide range of features designed to provide robust security for homes and businesses. These systems include high-definition cameras, advanced motion detectors, and user-friendly control panels, ensuring comprehensive protection.

Overview

Panasonic Security Systems come in various models tailored to meet different security needs. Whether you need a simple setup for a small apartment or a complex system for a large business, Panasonic has a solution.

Features and Benefits

Choosing the Right Panasonic Security System

Selecting the right security system involves considering various factors such as the size of your property, specific security needs, and budget.

Factors to Consider

Product Comparison

Panasonic offers several models with different features. Compare specifications to find the best fit for your needs.

Pre-Installation Planning

Proper planning is essential to ensure a smooth installation process.

Site Survey

Conduct a thorough site survey to identify the best locations for cameras and sensors.

Equipment Requirements

List all necessary equipment and ensure compatibility with your Panasonic Security System.

Panasonic i-PRO SmartHD Security Cameras Video

https://www.youtube.com/watch?v=yhBQZjmQFEM

Installing Your Panasonic Security System

Follow this step-by-step guide for installing your security system.

Step-by-Step Guide

Tools Needed

Setting Up Your Panasonic Security System

Once installed, configure your system for optimal performance.

Initial Configuration

Network Setup

Understanding the Control Panel

The control panel is the heart of your security system.

Key Functions

User Interface

The interface is designed to be intuitive, making it easy to navigate through settings and options.

Adding and Managing Devices

Expand your system by adding more devices.

Cameras

Install additional cameras to cover more areas.

Sensors

Add motion detectors, door/window sensors, and other accessories.

Customizing Security Settings

Tailor the system to your specific needs.

Alerts and Notifications

Set up custom alerts for different types of events.

User Permissions

Manage who has access to your security system.

Using the Panasonic Security App

The mobile app allows you to control your system remotely.

Features

Mobile Access

Download the app from the App Store or Google Play.

Monitoring and Surveillance

Keep an eye on your property at all times.

Live View

Access live footage from your cameras.

Recording and Playback

Record footage and play back important events.

Maintenance and Regular Checks

Regular maintenance ensures your system operates efficiently.

Routine Maintenance

System Health

Regularly check system health through the control panel.

Troubleshooting Common Issues

Resolve common problems with these tips.

Error Messages

Understand and fix common error messages.

Connectivity Problems

Ensure a stable network connection to avoid interruptions.

Enhancing Your Security System

Improve your system by integrating with other technologies.

Integration with Other Systems

Combine with home automation or other security solutions.

Upgrades

Upgrade firmware and hardware to access new features.

Data Security and Privacy

Protect your data with these tips.

Encryption

Ensure all data is encrypted.

User Data Protection

Follow best practices to protect user information.

Understanding Warranties and Support

Know your warranty and support options.

Warranty Details

Check warranty coverage for different components.

Customer Support Options

Contact Panasonic support for any issues.

FAQs About Panasonic Security Systems

How do I reset my Panasonic Security System? To reset your system, follow the instructions in the user manual or contact customer support.

Can I integrate my Panasonic Security System with other smart devices? Yes, Panasonic systems can be integrated with various smart home devices.

What should I do if my camera stops working? Check the power supply and network connection. If the issue persists, contact support.

How often should I update my system’s firmware? Regularly check for firmware updates and install them to ensure optimal performance.

Is my footage stored locally or in the cloud? Panasonic systems offer both local and cloud storage options.

Can I access my system remotely? Yes, use the Panasonic Security App for remote access.

Advanced Features and Customization

Explore the advanced capabilities of your security system.

AI Features

Leverage AI for enhanced motion detection and facial recognition.

Custom Integrations

Customize your system with third-party integrations.

Cost Considerations and Budgeting

Plan your security investment wisely.

Cost Analysis

Compare the costs of different Panasonic models.

Budget Planning

Allocate budget for installation, maintenance, and upgrades.

Case Studies and Real-Life Applications

Learn from real-life examples.

Success Stories

Read about how others have successfully implemented Panasonic Security Systems.

Practical Uses

Discover various applications of security systems in homes and businesses.

Future Trends in Security Systems

Stay ahead with emerging technologies.

Emerging Technologies

Keep an eye on new developments in security technology.

Innovations

Explore innovative features that are shaping the future of security systems.

Conclusion

Panasonic Security Systems provide reliable and comprehensive security solutions. By following this manual guide, you can ensure your system is installed, configured, and maintained correctly, providing peace of mind and enhanced security for your property.

.

Step 1: Prepare for the Update

1. Check the Current Firmware Version:

2. Visit the Manufacturer’s Website:

.

Step 2: Backup Your Settings

1. Backup Configuration:

.

Step 3: Update the Firmware

1. Prepare a USB Drive:

2. Insert the USB Drive into the XVR:

3. Access the Firmware Update Menu:

4. Start the Firmware Update:

.

How to Update XVR Firmware A Comprehensive Guide

Step 4: Verify the Update

1. Check the Firmware Version:

2. Restore Configuration:

.

Troubleshooting Tips

1. Ensure Compatibility:

2. Stable Power Supply:

3. Follow Manufacturer Instructions:

4. Common Issues:

.

Conclusion

Regular firmware updates are vital for the smooth operation of your XVR, enhancing security features, and maintaining compatibility with new technologies. By following the steps outlined in this guide, you can confidently update your XVR firmware, ensuring your device remains up-to-date and fully functional. Always refer to your device’s manual for model-specific instructions and consult manufacturer support if you encounter any issues.

or alternative guide

Updating the firmware of your XVR (eXtended Video Recorder) is crucial for maintaining its performance, enhancing security features, and ensuring compatibility with new devices. Here is a step-by-step guide to help you update the firmware on your XVR device:

Step 1: Prepare for the Update

Step 2: Backup Your Settings

Step 3: Update the Firmware

Step 4: Verify the Update

Troubleshooting Tips

Conclusion

Regularly updating your XVR firmware ensures the device runs smoothly, maintains security, and supports new features or devices. Following the steps outlined in this guide will help you successfully update your XVR firmware with minimal hassle. Always refer to your device’s manual for specific instructions related to your model.

.

Hikvision NVR 5.0 Professional Installation Guide

Hardware Installation

Software Configuration

Additional Resources

Important Note: The provided steps serve as a general guideline. Specific configurations might differ based on your NVR model. Always refer to the official user manual for detailed instructions and advanced functionalities.

Setting up a Hikvision NVR (Network Video Recorder) involves several steps, including hardware setup, network configuration, and camera configuration. Here’s a detailed guide to help you set up your Hikvision NVR 5.0:

1. Hardware Setup

Step 1: Unbox and Connect Components

Step 2: Connect the NVR to a Monitor

Step 3: Connect the NVR to the Network

Step 4: Connect Cameras to the NVR

Step 5: Power Up the NVR

2. Initial Configuration

Step 1: Boot Up and Log In

Step 2: Set Date and Time

Step 3: Network Settings

3. Adding Cameras

Step 1: Detect and Add Cameras

Step 2: Configure Camera Settings

4. Recording Settings

Step 1: Set Up Recording Schedule

Step 2: Configure Storage Settings

5. Remote Access Setup

Step 1: Enable Hik-Connect

Step 2: Port Forwarding (if necessary)

Step 3: Mobile App Setup

6. Final Steps

Step 1: Test the System

Step 2: Backup Settings

Troubleshooting Tips

This guide should help you set up your Hikvision NVR 5.0 system. For more detailed instructions, refer to the user manual or the Hikvision support website.

.

Our IP camera can connect directly to your network or computer, and there are three ways to do so. The three ways listed below do not require a NVR. A NVR, or Network Video Recorder, is the device that IP cameras connect to.  The NVR records video provided by the IP cameras to a hard drive, either in HD (720p, 1080p), 2K HD, or Ultra HD (4K) depending on the type of NVR and type of camera that’s being used with it.

IP cameras are network-based cameras, however they don’t require Internet access in order to be used as they are standalone devices that can be used on a local network. A simple local network can be either of the following:

1.An IP network camera connected with a network cable to your desktop computer’s network port.

2.An IP camera connected to a router that is connected to a desktop or laptop computer, but the router is not connected to the internet.

Only if you want to view your system remotely from the internet then you would have to connect the system to the Internet.

Do I need a NVR for my IP security camera system?

A NVR is not necessary in order to view your network cameras or even record video. If you are testing cameras, looking for a temporary setup or want to set up something inexpensive then using a computer with an IP camera is a good alternative to a NVR.  SmartPSS is our computer software program that allows PCs to view and record IP cameras. However, this kind of processing will demand a lot from the computer. Most likely, you wouldn’t be able to use that computer for personal use as it would be bogged down processing video from high resolution IP network cameras.  Also, computers can be unreliable and crash, potentially leaving you with no recorded video.

NVR products are standalone devices using a Linux operating system which is known to be rock-solid and crash free, and designed to be operate 24/7 and maintain system security with user account access permissions. For a complete security camera system, you will want to use a NVR along with cameras. SmartPSS software can be used as a client software to connect from a computer to a NVR to watch cameras connected to the NVR and to playback/download recorded security footage.

How to Connect IP Camera Guide 2024

Three ways to connect an IP camera to a computer

Before we begin, it is important to understand that network camera systems require the ability to transport video and power to work correctly. Power Over Ethernet (PoE) is a technology that transmits video/data signal and power over one Ethernet cable. In situations where PoE isn’t available, a 12V DC power adapter will be necessary to supply power to the camera.

Secondly, you will need to use our IP finder Config Tool to find cameras on your network. For more info on basic networking knowledge as to how IP addresses matter when deploying network cameras, please read our guide about connecting security cameras to the internet.

Now, let’s discuss the three ways to to connect to an IP camera from your computer.

1.12V DC power adapter with a network cable straight into a PC

2.12V DC power to camera + network cable to router

3.Camera to PoE Switch or PoE Injector

How to Connect IP Camera to Computer

1) 12V DC power adapter with a network cable straight into a PC

a) For this method we will provide power to the camera using a 12V DC 1amp power adapter that plugs into a 110V AC outlet. Below is a picture of our trusty power adapter.

b) Next, connect a network cable from the camera to your computer.

c) Set your computer’s network port to a static IP address like 192.168.1.200 so you can talk to the camera. Here’s how you do it on a Windows Computer:

d) All newer cameras with firmware from 2018 and onward have stringent password rules that require initialization before making any configuration changes to the camera including the IP address. In order to set the password and password recovery email address you must login to the web interface of the camera. Be sure to note down and keep the credentials you are setting in a safe place that you will remember.

There are no master reset passwords for our equipment. If you forget your password, recovery email address, and security questions that you set on the camera at time of initialization, resetting the camera requires factory service which will incur out-of-warranty costs to reflash the camera.

.

e) Once you have a static IP address assigned to your computer’s wired network port, turn off WiFi on your computer. You can find the camera’s current IP address by using the Config Tool as shown. Our test camera has a current IP address of 10.1.1.65. If you need to change the IP address to let’s say 192.168.1.120, you can do that by clicking on the pencil icon to edit.

Note: if you have a password other than admin set on the cameras, then you will need to enter that in the “search settings” options before attempting to edit the IP address. See the illustration below on how that is done.

f) As explained in our article connecting security cameras to the internet, for two devices on a network to talk to each other, they must have the same IP address scheme. In 1C we set our computer’s address to 192.168.1.200, so we need to set change this camera’s address to 192.168.1.X where X is a number between 2 and 254, and not same as the our computer’s current address. We picked 12, so below is a screenshot of what to set your camera’s ip address to if you are following along in our guide. Set the subnet to 255.255.255.0 and gateway to 192.168.1.1.

g) After changing your camera’s IP address to one that matches your network, type the new IP address of your camera into the URL of internet explorer. Here’s a brief example:

You can also view the camera using our PC software. If you don’t already have it, you can download SmartPSS from here. Here’s how if you already have SmartPSS installed.

In summary, the above is a quick and easy way to connect an IP camera to a computer with a hardwired network port. This is great for the following scenarios:

• You don’t have a router and want to set up a closed circuit system between a computer and a security camera.

• You are trying to test an IP camera or troubleshoot it.

• You are trying to connect to a security video recorder directly from a computer.

Most computers have only one network port, so this method can be problematic as it would use up your only network port, preventing you from having a hard-wired Internet connection. The next 2 methods will demonstrate how to set up a network camera on a network. Method 2 is for setting up a camera with a 12V DC power supply and Method 3 entails using a PoE injector or switch. The only different between these two methods is how power is supplied to the camera.

2) 12V DC power to camera + network cable to router

This method will show you how to connect an IP camera to your router and view it over a network, while supplying power to the camera using a 12V DC power adaptor.

a) Connect a 12V DC power supply to your camera and connect the power adaptor to the wall to power the camera.

b) Connect a network (Ethernet) cable from the camera to the router to establish a data connection between the camera and the router.

c) Give the camera about 2-3 minutes to boot. Use our IP Finder Config Tool to find the camera on your local area network (LAN).  Below is a screen shot of how it looks in our case.

The camera currently has an IP address of 10.1.1.65. As explained in our article connecting security cameras to the internet, for the camera to be reachable from the computer on your network, its IP address has to match the IP scheme of your network. In our case our router IP is 192.168.1.1, so we are going to have to change the IP address of the camera. To change the IP simple press the pencil icon to edit.

d) We are going to set the camera to an IP of 192.168.1.X, we chose 192.168.1.12. Before we go ahead and change the IP address, we have to think about duplicate IP addresses on the network which would create networking issues. To see if a specific IP address is available on your LAN, use the command prompt in Windows to ping the address you intend to use. Below is a video explaining how to use the ping command. You can use this command on Mac as well by using the terminal.

e) Let’s change the IP address. In our case we set it to 192.168.1.12. Subnet mask is usually 255.255.255.0 on simple networks, and the gateway is the IP address of the router. Press OK.

f)  Once the camera is assigned a new IP address, you can access the camera using your Web Browser or SmartPSS as shown in 1F above.

3) Camera to PoE Switch or PoE Injector

We discussed that PoE supplies power to the camera, so a 12V power adapter is not necessary in this scenario.

In this method you plug an ethernet cable from the camera to a PoE port on a compatible PoE switch or injector. The PoE switch or injector connects to the router.

Here’s how you connect to a PoE switch.

Here’s how you connect to a PoE injector

Again, use the Config Tool to find your camera’s IP address and change it to match your network scheme (if necessary) as described in steps 2C thru 2E. Once the camera is on the same network as your computer you can login and watch the camera as shown in Step 1F.

.

Summary

At this point, you now should know a good amount about networking and have used the above mentioned steps to make your very own IP camera system using your computer and IP camera.

Viewing an IP Camera on a Smart TV

Among the many different ways that security cameras are used, we are often asked if it is possible to view an IP camera directly on a Smart TV without using a NVR recorder. With most Smart TVs on the market there is no application that is available to watch IP cameras directly on the TV. In this guide we show how to use an Android TV box by downloading an App to connect an IP camera to a Smart TV or any monitor that has an HDMI input.

All IP cameras from CCTV Camera World support a RTSP video stream that is usable by third party programs and apps. The App that we suggest you use on an Android TV box is called VLC Media Player. You can login and access the RTSP stream from an IP camera and have it display on a TV.

Keep in mind any device that can download VLC Media Player can do this process like iPhones, iPads, Android tablets, and phones.

What equipment is needed?

Here’s the list of all the equipment that is needed to connect an IP camera to a Smart TV.

1.IP camera from CCTV Camera World

2.PoE injector or 12V DC Power Adaptor to power the camera

3.Network cables to connect the camera to your computer network

4.Android TV Box from any online shopping marketplace

5.Computer network to connect the camera and Android TV Box

6.Internet connection to setup and install Apps on the Android TV box which can later be removed after the setup process is finished

7.SmartTV or Computer Monitor with HDMI input

.

How to connect IP security cameras to an Android TV Box

Before you can access the stream from the camera you will need to have it connected to your computer network and verify that it’s accessible. If you purchased a standalone IP camera from CCTV Camera World the camera is likely already configured with an IP address. Check the top of the camera box for the login information label. If the camera has not been configured, or you need to set it up on your network we recommend following our How to Connect an IP Camera guide.

You will also need to set up your Android TV box on your network, consult with the manufacturer of your box to find out how to do this.

You will need your IP address, username, and password that is set on the camera in order to access it. Inside of the VLC Media Player app you can access network streams. Inside of the app navigate to adding a video source and select network stream. Using the example RTSP stream below plug in the information for your camera’s IP address and type the text into the media player URL.

rtsp://192.168.1.109:554/cam/realmonitor?channel=1&subtype=0

After you’ve typed in the correct RTSP stream for your camera you will be required to login to your camera stream. Type in the username and password for your camera to allow the app to login to your camera stream.

If you receive an error, double check that your camera is connected to the network and you’ve typed the correct username and password. Provided the camera is set up on the network and you are able to login you should now see your camera stream inside of the VLC Media Player App.

Keep in mind that Smart Camera features cannot be used with the RTSP stream. If you would like to use Smart Detection features that your security camera may have, you will want to use an NVR to display the camera on your TV.

Watch our video below that shows the setup process described above on an Android TV box.

.

.

Unlimited Access Anywhere, Anytime

When you combine our “Blue Line” IP Cameras with one of our compatible IP camera network video recorders you can keep an eye on your assets no matter where you are. Take advantage of the free remote viewing app to view on your cell. Use the free software to view and control you cameras on your tablet, or computer. Stay connected and have peace of mind knowing you can monitor your cameras remotely, without any additional monthly fees.

LATEST FIRMWARE UPDATES FOR YOUR DEVICE

UPDATING YOUR SECURITY CAMERA FIRMWARE

Firmware Updates

In order to do a firmware update you must first identify the EXACT model number of your DVR or NVR unit. The model number can be found on the sticker located on the bottom or side of the unit. All CCTV Security Pros model numbers begin with the prefix “CSP” (Example, CSP-XXXX). Please match your model number to the list provided below. You will also need to locate your order confirmation email to determine when the unit was purchased. Once you have identified the correct model number and firmware please continue by following the instructions below.

Blue Line IP Camera Troubleshooting v2

Upgrading Your Firmware

Please identify the correct model from the list of firmware provided below.

Please select the appropriate link and download the .bin file. Once the download is completed copy the .bin file to a USB Flash/Thumb Drive. We suggest formatting your USB drive to FAT32 before attempting the update.

**Note : Units with Build Dates of 2013 or earlier may require you to rename the file to “update.bin” before launching the upgrade.

Once the .bin file has been transferred onto your drive you can insert the USB Drive into either of the two USB ports found on your unit. One can be found on the front panel and one can be found on the rear of the unit.

Once the drive is inserted into the unit go to the following menu:

Main Menu –> Setting –> System –> Upgrade. Click Start. Find and select the .bin file you transferred to the USB Drive and Click Start.

*NOTE – On select models you will need to go to:

Main Menu–> Info –> Version –> Upgrade

The unit will now begin upgrading to the latest Firmware Revision that is available for your device. Once completed the system will reboot. After the reboot we recommend doing the following:

1) Remove the USB Drive from your system.

2) Change your passwords on your “admin” account. For assistance in altering your password please follow this link: https://www.cctvsecuritypros.com/content/pdfs/password-account-settings.pdf

.

IMPORTANT: If you are having difficulty identifying the correct firmware please email us at support@cctvsecuritypros.com with your order number and unit model number.

User Account Locked

Your system will lock itself out when you or someone else has attempted to log into your DVR

with an incorrect user/password combination more than three times within 30 minutes

When this happens you have two options.

1. Wait 30 minutes after the last failed login attempt and try again.

2. Reboot the DVR by using the rear toggle switch or by unplugging.

When the unit powers back on try and login with the default username and passwords.

Username: admin

Password: admin

or

Username: 888888

Password: 888888

If neither of these passwords get you into your system you will need to email us at

Support@CCTVSecurityPros.com

and request a Master Password. Once we can confirm your

account we will happily be able to provide you with the correct login credentials.

Please have your Order Number or DVR/NVR Model Number when requesting a Master

Password.

*Note: The DVR/NVR Model Number can be found on the Bottom or Side of your system.

.

IP Camera Harness Repair

If your connector looks like the ones below, moisture has gotten into your RJ45 connector. The number one cause of premature IP camera failure has to do with improper weatherproofing techniques. If caught early enough a simple cotton swab and rubbing alcohol will clean that connector right up! You may need to resort to some heavier duty electrical contact cleaner if the cotton swab method does not work.

If all else fails and the connector is too far gone and cleaning it will not work, you will need to perform a harness repair.

.

In order to perform the repair you will need:

.

.

1 x RJ45 Crimp Tool1 x Male RJ45  1 x Female to Female RJ45

Connector

.

1 x Your choice of weatherproofing ( Weatherproof junction box or weatherproof Female to Female connection)

.

.

Start by removing the RJ45 end off of your IP cameras harness. Be sure

.

Strip back the outside insulation to expose the internal cables.

.

Organize the cables to match the pinout of the IP camera. Slide the organized cables into the connector and crimp. All CCTV Security Pros IP cameras will use this pinout.

Connect your Female to Female RJ45 connector to check your work, you should have a functioning IP camera now that its void of all corrision.

Now that the IP camera has been repaired we still need to weatherproof this connection. It is now more vulnerable than ever!

Consider using a weatherproof junction box to make your connections in, or perhaps a weatherproof Female to Female connector.

Remember that different coupling styles exist so make sure that you are informed about how to use the coupler before you start crimping wires.

Troubleshooting Steps 4/8/16 Channel

(Cannot Find the Network Host)

To solve the error, please verify that the camera is properly plugged into the back of the system. If you unplug and re-plug it back in this should verify it is connected physically.

If the issue continues go to Main Menu > Camera > Camera List and delete the camera with the red status from the bottom list and do a Device Search to verify the camera is showing up on the top list.

If the camera does not show up this means the cable is not connecting properly, which could either mean the camera is not getting power or isn’t transmitting data. The best way to determine whether it is an issue with the Camera or Cable is to bench test the camera on a known working cable.

If it does show up but it has a different IP Address, please confirm the IP Address is in the 10.1.1.1-255 range (This is the default range of the internal Switch).

If the camera is not within the correct IP range, then the camera could need to be modified on the top list to properly connect in which you would select the camera, hit modify, type in the camera’s username and password and set the IP address to DHCP to automatically obtain an IP or statically assign the camera an IP address to match your switch range and gateway.

If the camera is on the correct range, you should be able to add it to the bottom list and it will come up with Green or Red, If Red double check the error message on the live view on the system.

If the Error says Invalid Username or Password, go back to Settings > Camera > Camera List and modify the camera at the bottom of the list and type in the correct login information.

If the error says Cannot Find the Network Host, check the IP Address is in the correct range, if it is you need to verify your cable is good by testing the camera with another known good cable or testing on a short patch cable as the cable could be experiencing packet loss.

Make sure the cable is T568B Standard and is within 100 meters (328 feet.)

Night Vision Issues

When a camera goes into night vision mode, the infrared LEDs around the lens turn on. If the video signal at nighttime or in dark locations is washed out, foggy or you see “halos” on the screen it is because the infrared LEDs are reflecting back into the camera lens.

cameras LEDs to focalize on the mounting surface and greatly reduce the Infrared distance.

Adding 3rd Party Cameras to Blue Line NVR

We always recommend using Blue Line IP cameras with our Blue Line NVRs for the easiest and most complete experience possible. However, we understand that using 3rd Party Cameras can be beneficial in some applications. This guide will explain the basics of adding a 3rd Party IP camera into your Blue Line NVR.

Information you will need to add 3rd Party Cameras.

With your camera attached to one of the PoE ports on your NVR, you’ll navigate to the camera settings from the main menu.

A 3rd Party Camera normally will not add itself, so you will need to go into the Camera List and click on Search Device. If the camera is detected, you will be able to select it and click on the Modify IP button toward the middle of the screen.

When modifying the IP address of the camera the default IP range for the PoE ports on the NVR is

10.1.1.xxx so you’ll want to make sure the camera is on the same range.

You will need to know the camera’s password to change the IP Address. Once the IP is successfully changed it should update after clicking Search Device again

Check the box to the left of the camera and click Add. Most cameras will show up with the Manufacturer as ONVIF. If they do not and show up as red, you will need to click on the edit button on the camera and change the Manufacturer to match the camera’s manufacturer, or to ONVIF if the manufacturer of the camera is not listed.

While in the modify window you can also enter the password for the camera in the password field. Once that is completed you can click OK. After a few seconds the status should change to a green icon and then you should be able to see the camera’s live view. Please keep in mind that if the Error Message says Invalid Username or Password you may need to login to the camera from the Web and setup an Onvif User for the system to login with.

If the camera is still showing offline, setting the manufacturer to PELCO can sometimes resolve the issue.

Additional 3rd Party Camera Information

DVR/NVR Rebooting

If your DVR or NVR is rebooting by itself please read the guide below.

If your DVR or NVR is rebooting once a week this is completely normal. Our DVR and NVR systems are designed to reboot once a week (Tuesday at 2AM by default).

If your DVR or NVR is rebooting more frequently you first want to check the power source of the DVR or NVR.

Be sure you are using the correct Power Source that was included with the DVR or NVR. Below are the correct power adapter specs so you can identify the correct one.

NVRCUBE = 12V, 2.0Amp NVRWIFI = 12V, 2.0Amp

LITE Series DVR = 12V, 2.0Amp

Pro Series DVR = 12V, 5.0Amp

Pro Series NVR = 3 Prong Power Cord to Power Outlet Extreme Series DVR/NVR = 3 Prong Power Cord to Power Outlet

If you can confirm you are using the correct Power Adapter you may need to double check the outlet you are plugged into. Try an alternate outlet and eliminate any Battery Backup Power Supplies for test purposes.

If the power source is not causing the reboot cycle it could be related to the internal hard drive. To check this out please continue reading.

First you will need to Power Off the DVR. We suggest powering the system down from the Power Switch on the rear of the system or by simply unplugging the Power Cable.

Once the system has been powered down you will need to open up the system. Please see below to locate the screws that need to be removed.

NVRCUBE or NVRWIFI

There will be 4 Phillips head screws located on the bottom of the system. Once the screws are removed the top cover will lift off.

Lite Series DVR

There are 2 Phillips head screws located in the rear and 2 on the side of the DVR, 1 on each side. Once the screws are removed the top cover will lift off.

Pro Series DVR/NVR

There will be 4 Phillips head screws located on the rear of the system. Once the screws are removed the top cover will slide towards the rear and lift off.

Extreme Series DVR/NVR

There will be 2 Phillips head screws located on the rear of the system. Once the screws are removed the top cover will slide towards the rear and lift off.

Once the top cover has been removed it will expose the Hard Drive and its connections.

First we want to Unplug the Large Black Connector. Press down on the metal tab and pull the connector out of the Hard Drive.

Now we want to unplug the second smaller connector (Blue Cable) from both ends. Press down on the tab and remove from the Hard Drive as well as the System Board.

Once the connections have been disconnected. Plug them back in securely and listen for the metal tab to click. This will ensure a good connection in between the System Board and Hard Drive.

Note*

While you still have the system open, it might be a good idea to check the cooling fans for any dust or debris that could be stopping the fan from moving. This could cause the DVR or NVR to overheat.

Once the connections are tight, lets put the top cover back on. When the cover is back on you can proceed to power on the system. Once the system is powered on you will need to monitor the system and check if it is still rebooting.

Disconnecting The Internet

If the system is still rebooting you may want to disconnect it from your Router or Modem by unplugging the Ethernet cable in the rear. You will loose your remote viewing capabilities temporarily while unplugged but can help us diagnose the issue.

With the cable unplugged you may want to monitor the system closely to see if this has made any changes to the rebooting issue.

Disconnecting Cameras and Other Sources

Disconnecting cameras, alarms, extra monitors and microphones is the last thing we can try to solve your rebooting issues.

Cameras, monitors, and microphones mounted near high voltage could be causing your system to reboot by itself. If your system detects any incoming voltage or amperage coming into the rear inputs the system will shut down to protect itself from damage.

Leave your main Display Monitor and Power Source connected. Disconnect one input at a time to see if it makes a change in your reboot cycle. If you notice a change in the rebooting you can single it out by using this method of elimination.

1.Download the mobile APP (Guard Viewer) and Sign up

for an Account

Further support, plz email us at email love@hiseeu.com

Or contact us at +1 917 688 222

Download the mobile APP and Sign up for an Account

1. Download and install the app.

Please scan the QR code to download the free APP “Guard Viewer”

You also can visit the Apple Store or the Google Play Store to download the Guard Viewer app for iOS or Android devices. Alter installation, tap the icon to launch the app.

2.Register an account and login

For first time use, please create a new account and add the following steps:

Please tap Sign up and follow the on-screen prompt to register an account by email.

2.Add Device to APP(Guard Viewer)

YS AHD TVI Security System User Guide v1

Further support, plz email us at email love@hiseeu.com

Or contact us at +1 917 688 2228

Add Device to APP(Guard Viewer)

Auto add is not suggested. Please tap on “Later” if you see this message box.

In this situation, it will Auto Search to discover the NVR device connected to the local network. But once your mobile phone disconnects with LAN WiFi, you will not be able to view it anymore.

Please Add devices in this way

1.  Please Tap on  “ Menu” icon> Tap on “Devices”> “Add” ,

2.  Tap on “Scan”> “OK ” to scan the NVR QR code

3.Navigate to “Menu– Network> Basic> P2P”

• If the Device Status is “Network connected…” , means device is online   and ready for remote view

• If the Device Status is “Offline” , please check the network connection first, if the problem remains, please feel free to contact us at  Love@Hiseeu.com   

After you add the device successful, the “Device status” will be “Online”, and your APP account username will display here.   • You can check your APP user name by navigate to “Me”

• If the username doesn’t belong to you, please click on “Delete” and add it again.

4. add NVR by scanning device QR code and click on “save”

5.    Please Tap on “Menu ” icon, Tap on “Live View” “Add”

6.  Select the device and tap on “Start Live View ”

3.Device shows “Offline” (system kit to app)

Device shows “Offline” (system kit to app)

1. If the device shows offline on the mobile phone app, we need to make sure the NVR is connected to the network perfectly or not

2. Go to your monitor that is connected to NVR, and check out the network status first navigate to this path first: “Menu–Network–Basic–P2P”, also check whether the device status is online or not,

3. Also go to “Menu–Network–Advanced”,to disable the “PPPoE”

4. if it shows: network disconnected, plz enable the DHCP in this path ” Menu–Network–Basic-TCP/IP ” and click “Apply”. After that, go back to “P2P” and check if the device status is online or not

5. if you connect the network cable to the lan port or the lan/wan port of the router

We need to connect it to the lan port of the router,plz take a photo of yours for us to check.

.

If the P2P show connect the network ,but the app also show the offline,please delect the device on your APP and re-add it again.

4.Enable push alerts on APP

Enable push alerts on APP

5.Why I can’t remote view when the network is outside？

Why I can’t remote view when the network is outside？

.

Cause: Customer doesn’t follow the instructions on the user manual and add the device in a local adding way, so we suggest them to delete the device first, and re-add the device again like this FAQ

https://www.hiseeu.com/a/help/article/53969

6.APP Share Device

APP Share Device

One device is linked to one user only. The NVR system can only be controlled by one authorized account, which can share the device with others to prevent attack or hacking.

There are 2 ways to share the device with others. For the admin user, please follow the instructions to share the device:

1.Type in “Menu Icon ” and navigate to “Devices”

2. Tape on “… ” > “Share”, You can select a single channel to share or select the entire NVR system to share

3.Share the device by typing in the user name you want to share and selecting the function as needed.

• The other user needs to register a Guard Viewer APP account and provide the user name for sharing.

• After that, when this user login the APP will find the device by navigating to “Devices”.

4.Share the device by generating a QR code

• Create a sharing password and set the valid period

• Click “Generate”, your APP will generate a QR code

• Other users can use the APP to add the device by scanning the QR code you sent

7.Add Device on Guard Station PC Client Software

Add Device on Guard Station PC Client Software

Further support, plz email us at email love@hiseeu.com

Or contact us at +1 917 688 2228

Add device to “Guard Station” Download link: https://www.dropbox.com/sh/jeftu4sqwy4y1u8/AAD4PkyEJxg6j4H1n20PxBkZa?dl=0  

Please sign up for the mobile APP(Guard Viewer) account and add the device first.

Download and run “Guard Station” on the PC

1) Please Navigate to “Device Management”> “Cloud Device”> Click on “Login”

2) Login with your APP account and password.

3) After Login, the device you added to the APP will list here

Please click on “Control Panel”> “Live View”> Double-Click Camera to load the live view video

8.Guard Station shows “offline”

Guard Station shows “offline”

plz check local NVR is connected to network perfectly or not,If your NVR hasn’t connected to the network yet, it will show “offline” in your PC Client “Guard Station”

Plz go to your NVR that is connected to Monitor,

Check out the network status, first navigate to this path first : “Menu–Network–Basic–P2P” ,and check the device status is online or not,

if it shows: network disconnected, plz enable the DHCP in this path ” Menu–Network–Basic-TCP/IP ” and click “Apply” , After that, go back to “P2P” and check if the device status is online or not

9.Not Recording? HDD not working?

Not Recording? HDD not working?

Right-click the mouse from “Menu–Storage–Hard Disk”

If there is no hard drive information or Status shows Abnormal, the hard drive is having an issue

10.AHD5 Modify the Camera model

AHD5 Modify the Camera model

（Please notice that AHD5 cameras only the TVI camera model have the audio function，the AHD5 cameras we sell seperately is the AHD model so it should modify the TVI model to have the audio function)

1. Click the OSD Menu Control , then click the arrows to the Menu t hen click the icon to select the “VIDEO SETTING ”

2.Select the VDEO SETTING and click the arrow to enter.

3.Then Select the “TVI ” on the HD, then click the “APPLY&REBOOT “and then click the “RETURN “and the “EXlT” back to the Version

4.Finally Turn Audio On

11.Forget DVR Password

Forget DVR Password

If you forget your current password, please follow the instructions to reset it.

1. In the system login interface, please click on “Enter Password” > “Forgot Password”

2. If you filled in your email address as a reserved email when you set up the system, you can reset the device password via the APP(Guard Viewer)

In NVR interface, tap forgot password.

1. Scan the above QR code by APP “ME–General–Forget Device Password” , and the security code will be sent to your email address.

2. If you haven’t set up an email before, or have any difficulties resetting the password, please take a screenshot of this interface(Serial No. please also make the code is as clear as you can ), and email us at love@hiseeu.com , since we need the serial number to produce a new password by using an internal tool

12.One or two cameras are not working

One or two cameras are not wokring

(1) BNC Cable connected to Camera is broken

Step: Use another BNC cable to connect the camera to have a try

(2) The port of the DVR box is broken

Step: After changing the BNC cable, and still there is no camera image, plz insert the camera into another port of the DVR to have a try

(3) Camera is broken after troubleshooting with the steps （1）-（2）

13.Four cameras or above are not working

Four cameras or above are not working

Four cameras or above not working is an abnormal situation. It’s not only a camera issue, which could be related to a power supply or power splitter connected to four cameras

If the power supply or power splitter connected to four cameras is broken, which can’t provide power supply to cameras

Step:

(1）Change to another 12V 2A Power Supply to connect to four cameras to have a try. We wanna make sure if this is related to the power adapter

(2) Change another 1-4 way power splitter to connect four cameras to have a try. We wanna make sure if this is related to the power adapter

( If you do not have another power adapter/splitter, plz use the other power adapter connected to the four normal cameras)

After making sure the power supply or power splitter is doing fine, but still no camera image, which means the DVR box is having issue

4.Eight Cameras are not working

Eight Cameras are not working

Please check your camera connection is correct ， if the connection is correct ，

i t’s mostly possible the DVR box is having issue, and need a new DVR box replacement

Further support, plz email us at email love@hiseeu.com

Or contact us at +1 917 688 2228

15.How to record the event only？

How to record the event only ？

Please click the mouse to the Menu then click the “ Storage ” and then click the “ Recording Schedule ”，“ Select Camera ” then click the “ enable Schedule ” click the “ Audio Storage ” then select the color of record type and fill in the corresponding time and date.

.