Eseecloud Wireless PTZ Camera installation

XVR AiD — Wed, 11 Jan 2023 19:42:59 +0000

Eseecloud Wireless PTZ Camera installation ls press and hold the reset button on the camera for 6 seconds to reset the camera, then connect camera to your router LAN Port with network cable, then click “other ways to add”, select “LAN scan”. it will search device automatically, click Add.

How to add camera to the app Eseecloud?

1, please press the reset button for 6’s to reset the camera, then go to the app EseeCloud, click add camera—other ways to add—Battery camera.

2, Click “Device light is blinking”—Remote View.

3, Select your home wifi (the camera only support 2.4g wifi, not support 5g) and input password, click Next.

4、there is a QR code on your mobile phone, aim the QR code of the mobile phone at the camera lens at a distance of 2-3ft. when you hear the prompt voice, click the blue button below, wait for device to connecting successfully.

Eseecloud Wireless PTZ Camera

How To Use ICSEE Camera

Add a camera to eseecloud through a network cable

1, Pls press and hold the reset button on the camera for 6 seconds to reset the camera, then connect camera to your router LAN Port with network cable, then click “other ways to add”, select “LAN scan”. it will search device automatically, click Add.

2, After add successfully, please click setting icon–click Advanced settings–Connect new WiFi–select your home WIFI and input password–Confirm. Then unplug network cable.

The camera often offline

1, Check whether the camera antenna is vertically upward.

2, please confirm the distance between the camera to your router, it better within 30FT, if the distance too far, the camera will offline.

3, If still offline, please give your camera version, we will give you a firmware to upgrade camera, it can enhances the camera’s signal.

Camera can’t connect to wifi

1, please confirm wifi is 2.4G or 5G, the camera only support 2.4G. And wifi password cannot exceed 12 characters.

2, if it is 4G wifi, please place the camera next to the router, then press the reset button for 6 seconds to add device again.

3, or you can connect the camera to your router with network cable, then switch to wirelessly connection.

How to using PTZ function on NVR?

1, please left click your mouse, you will see a smart menu below, click PTZ control.

2, click the arrow direction to move the camera.

Please note, if your camera is digital camera, you can’t zoom in or out in this interface, it only suit for optical zoom camera.

You need to go back to main menu, left click mouse again, click zoom in, then roll you mouse to zoom in.

but when you zoom in, the camera image will blur.

How to share the device to other one?

a, Please go to the app–click “Share” icon–select permission and effective time.

b, after click complete icon, you will get a QR-code.

Please note that another phone must first download the application “esecloud” and then register a new account. One account cannot log in to two mobile phones at the same time.

Unable to hear camera sound

If “x” is displayed on sound option, it is not turned on, you need to turn on first.

If still can’t hear sound, please go to setup interface—recording settings—verify that the “Record Sound Switch” option is enabled.

How to connect the camera to Alexa?

This is the link about how to connect the camera to Alexa, please refer it.

https://www.amazon.com/vdp/02b7820dd64d4ad6a457fcfd8638e830?ref=dp_vse_ibvc1

If Alexa showing “Live view not supported”, please don’t worry, this is Alexa app issue,

Actually it can view camera on Echo Show. Write your article here

How to setup motion tracking

If you add camera to NVR, please go to video detection to check whether your nvr support motion tracking.

Usually, NVR not support motion tracking, you need to add camera to the app Eseecloud, then add to NVR, so that you can setup motion tracking on the app.

1, Into device—click setting icon on upper right corner—go to smart detection alarm—enable motion tracking option.

How to set preset position cruise

1, go to setting interface—ptz control—cruise mode—select preset position cruise.

2, go back to record interface–click Preset–add more than two different positions–go to More–click cruise.

After setting successful, the camera will cruise within the preset position range.

Camera not recording after install SD card

1, Please go to setting interface–Storage setting–local storage space–check the status of the SD card.

2, SD card is in normal status, please check if SD card capacity is full, and then format the SD card.

3, If showing no SD card, please take the SD card out and insert it again. (Please keep the power off before inserting the SD card)

Alexa not skill Eseecloud

1, Please check if you have enable Alexa option on the app, click setting icon, advance settings, Alexa service authorization.

2, you need to login Eseecloud account with phone number or Email address, If you use third-party software to log in to Eseecloud, such as Google, you cannot log in to Eseecloud on Alexa

Please note, If Alexa can not find camera, please check if you have setup a name for camera.

seecloud Cloud Service Fee Standard

upgrade the ptz camera to new version.

We have upgrade our ptz camera version, you can scan the QR code to add the device without connecting camera hotspot.

and you can add the camera to nvr directly, don’t need to input password.

1) connect the camera to the same network as your computer with a network cable, then download a tool to search your camera IP, copy firmware to your computer. this is the link of tool.

http://download.dvr163.com/tool/IPCamSuite-1.2.26.8.zip

after you dowaload the tool successfully, please open it and click refresh to find the camera ip. upload the firmware and click upgrade. Write your article here

please note, when upgrading the camera, please do not unplug the power or reset the camera, otherwise the camera will crash.

if you want to upgrade your camera version, please email johnny@hiseeu.com to get a upgrade firmware.

Fixed-point cruise on NVR

1) Right click the mouse–system setup–channel setup–PTZ setup. select correct channel. Add first cruise point,

2) click add to set first position (the default is 1, which does not need to be changed),

3) then click preset box select 2–add, add multiple cruise points in this way. You also can select “keep time” you want, preferably in five seconds or more.

4) And then click “?” question mark into the PTZ control interface–click PTZ control option to set first position, then click store.

5) change the preset box to 2, adjust the camera lens to second position–store

6) right click anywhere –return to the PTZ setting interface–apply—ok.

After connect to mobile phone, camera showing “wrong password” on NVR.

If you are adding camera to your mobile phone through camera hotspot , it will generate a random password.

1, Go to app Eseecloud, click three points icon on right upper corner, click edit. Fast click 6 times on blank area,

you will see random password.

2, Go to NVR, right click mouse—video manage—manial edit.

3, select channel—input random password, click ok,

If still showing connecting fail, please click match code to match camera.

Source : https://www.hiseeu.com/a/help/category/11709

cctv camera system – XVRAID XVR-DVR-NVR CCTV DESK